component
GBU808
Public Made by Adomby adom
MDD（Microdiode Electronics） Bridge Rectifiers, GBU. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+2964
README.mdadded+59@@ -0,0 +1,59 @@+# GBU808++**MDD（Microdiode Electronics）** · Bridge Rectifiers · GBU++GBU808 from MDD（Microdiode Electronics）, in a GBU. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | + | passive | Positive DC output terminal of the bridge; the GBU808 is rated 8.0 A average forward current (I(AV)) and 800 V VRRM. |+| 2 | 2 | passive | AC input terminal; the GBU808 is rated for 560 V maximum RMS voltage (VRMS). |+| 3 | 3 | passive | AC input terminal; the GBU808 is rated for 560 V maximum RMS voltage (VRMS). |+| 4 | - | passive | Negative DC output terminal of the bridge; the GBU808 is rated 8.0 A average forward current (I(AV)) and 800 V VDC blocking voltage. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MDD（Microdiode Electronics） |+| Package | GBU |+| Category | Diodes |+| Pins | 4 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Maximum repetitive peak reverse voltage (GBU808) | VRRM | | | 800 | V | | 1 |+| Maximum RMS voltage (GBU808) | VRMS | | | 560 | V | | 1 |+| Maximum DC blocking voltage (GBU808) | VDC | | | 800 | V | | 1 |+| Maximum average forward rectified current | I(AV) | | | 8 | A | Tc=100°C (without heatsink) | 1 |+| Peak forward surge current | IFSM | | | 175 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 |+| Maximum forward voltage | VF | | | 1.1 | V | at 4.0A DC | 1 |+| Maximum DC reverse current | IR | | | 10 | μA | TA=25°C, at rated DC blocking voltage | 1 |+| Maximum DC reverse current | IR | | | 0.5 | mA | TA=125°C, at rated DC blocking voltage | 1 |+| Typical junction capacitance | CJ | | 60 | | pF | Measured at 1.0MHz, applied reverse voltage 4.0V DC (Note 1) | 1 |+| Typical thermal resistance, junction to ambient | RθJA | | 2.2 | | °C/W | Device mounted on 75mm*75mm*1.6mm Cu plate heatsink (Note 2) | 1 |+| Operating junction temperature range | TJ | -55 | | 150 | °C | | 1 |+| Storage temperature range | TSTG | -55 | | 150 | °C | | 1 |++## CAD (KiCad official)++- Symbol: `GBU808`+- Footprint: `Diode_THT:Diode_Bridge_Vishay_GBU`+- 3D model: GBU (KiCad packages3D, STEP)+- 3D model files: `gbu808-etched.step` / `gbu808-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gbu808.step` / `gbu808.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MDD（Microdiode Electronics） datasheet](docs/gbu808-datasheet.pdf) (3 pp, sha256 `180b29044288d80c`, retrieved 2026-10-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gbu808-datasheet.pdf)
docs/gbu808-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
gbu808-etched.glbadded⋯ 1 unchanged line ⋯
gbu808-hero.glbadded⋯ 1 unchanged line ⋯
gbu808-hero.overlay.jsonadded+177@@ -0,0 +1,177 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "GBU808",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 4,+ "span_mm": 18.44,+ "dash_mm": 0.45,+ "gap_mm": 0.27,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -2.15,+ 0.0+ ],+ "r_mm": 0.35+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 4,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 2+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.001,+ "tolerance_mm": 1.475,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.499,+ 15.739,+ -0.249,+ 0.251+ ],+ "pads_bbox_mm": [+ -1.6,+ 16.84,+ -1.6,+ 1.6+ ],+ "seating_z_mm": -16.0+ },+ "sources": {+ "glb": "gbu808-etched.glb",+ "glb_sha256": "103b930d3d3b3b133a799da7d5ca65b6e332d09fb35c5874601bf12c54189e71",+ "footprint": "gbu808.kicad_mod",+ "footprint_sha256": "627c0ca7d8adcf23585e1f834374ab59bfcd3d14b82fc4c21e99c2412855e018",+ "pins": "page.json component.pins",+ "pins_sha256": "f0a6fa3a4340622a52c738491e1a02cf5bd4c3fc5892727e99fdbdd5898ceec0"+ },+ "generator": "adom-wiki 1.7.76 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "+",+ "x": -2.65,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "2",+ "x": 3.33,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "3",+ "x": 11.91,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "-",+ "x": 16.99,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 3.2,+ 3.2+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "circle",+ "center_mm": [+ 5.08,+ 0.0+ ],+ "size_mm": [+ 3.2,+ 3.2+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "circle",+ "center_mm": [+ 10.16,+ 0.0+ ],+ "size_mm": [+ 3.2,+ 3.2+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "circle",+ "center_mm": [+ 15.24,+ 0.0+ ],+ "size_mm": [+ 3.2,+ 3.2+ ],+ "rot": 0.0+ }+ ]+}
gbu808.glbadded⋯ 1 unchanged line ⋯
gbu808.kicad_modadded+303@@ -0,0 +1,303 @@+(footprint "Diode_Bridge_Vishay_GBU"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "Vishay GBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88606/g3sba20.pdf")+ (tags "Vishay GBU rectifier diode bridge")+ (property "Reference" "REF**"+ (at 7.7 3.3 180)+ (layer "F.SilkS")+ (uuid "fc3db5cf-d52b-4fd6-8ad9-8991421ddb23")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "Diode_Bridge_Vishay_GBU"+ (at 7.1 -2.5 180)+ (layer "F.Fab")+ (uuid "9b66e653-7135-4b3f-9aea-4f368a8f4e89")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "7439fee8-5528-4f1d-936e-a1f4619dc1cb")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "409e8945-d31e-43ee-95d3-975939a9c5c6")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr through_hole)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -3.5 -1.2)+ (end -2 -1.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "f16b0134-cf35-4729-9ecb-445b3de707da")+ )+ (fp_line+ (start -3.5 2.4)+ (end -3.5 -1.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "8f99375d-c46b-47aa-997b-965392d8051f")+ )+ (fp_line+ (start -0.3 2.4)+ (end -0.3 1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "6ad3bb8b-21d1-4a42-88ea-07f2cbb112da")+ )+ (fp_line+ (start 2 -1.2)+ (end 3.5 -1.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "45581ef8-f700-4641-a35b-3ac38ad39f63")+ )+ (fp_line+ (start 6.7 -1.2)+ (end 8.6 -1.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "f93b6524-e60c-47d9-b6f5-d041b9b5f1b7")+ )+ (fp_line+ (start 11.7 -1.2)+ (end 13.7 -1.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "ad2cad2b-7ba9-44cb-b43a-c6cb251befc1")+ )+ (fp_line+ (start 16.8 -1.2)+ (end 18.8 -1.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "a443f30f-a360-4d6e-9583-48ffc3c5f685")+ )+ (fp_line+ (start 18.8 -1.2)+ (end 18.8 2.4)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "24e6cc6e-e035-4b69-81e9-ea98ce7a332f")+ )+ (fp_line+ (start 18.8 2.4)+ (end -3.5 2.4)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "ca80c72b-4e55-4cad-b2b3-c6a2853b0719")+ )+ (fp_line+ (start -3.65 2.55)+ (end -3.65 -1.85)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "e0af81ca-9525-4aed-9c00-f95ba33d4f39")+ )+ (fp_line+ (start -3.65 2.55)+ (end 18.95 2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "ffb43dd8-84db-471f-97c7-e0ac18c2f787")+ )+ (fp_line+ (start 18.95 -1.85)+ (end -3.65 -1.85)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "1037e7da-eea8-4ea3-9298-41685f7bd48f")+ )+ (fp_line+ (start 18.95 -1.85)+ (end 18.95 2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "2c62634c-08e1-4145-b610-b295c2f6da6a")+ )+ (fp_line+ (start -3.4 -1.1)+ (end 18.7 -1.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "f7f87df4-4c41-438c-91c4-2bc4254884c5")+ )+ (fp_line+ (start -3.4 1.3)+ (end -3.4 -1.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "3a1ce48d-dee8-4ed2-a9c6-0b5ceeb6f154")+ )+ (fp_line+ (start -2.5 2.3)+ (end -3.4 1.3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "7cbae50b-7233-48e5-bc8f-6c69f96f0fe7")+ )+ (fp_line+ (start -0.3 2.3)+ (end -0.3 -1.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "291130ca-340f-42ca-9c9b-9c4480505172")+ )+ (fp_line+ (start 18.7 -1.1)+ (end 18.7 2.3)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "f9c92362-09ad-4e48-81bc-9af852898ba4")+ )+ (fp_line+ (start 18.7 2.3)+ (end -2.5 2.3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "67585caa-5f3b-4cc1-aff5-aab0550959ab")+ )+ (fp_text user "${REFERENCE}"+ (at 7.65 0.6 180)+ (layer "F.Fab")+ (uuid "81edc6a6-6935-43eb-8770-438be1bb52ce")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" thru_hole rect+ (at 0 0)+ (size 3.2 3.2)+ (drill 1.6)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "3d97320e-dbea-4a1a-b37b-e1837f26bc05")+ )+ (pad "2" thru_hole circle+ (at 5.08 0)+ (size 3.2 3.2)+ (drill 1.6)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "354ce862-d91b-4055-b98a-f2e93bf63d9c")+ )+ (pad "3" thru_hole circle+ (at 10.16 0)+ (size 3.2 3.2)+ (drill 1.6)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "f2cc1416-0776-4e3e-9d09-b8ab79f4171b")+ )+ (pad "4" thru_hole circle+ (at 15.24 0)+ (size 3.2 3.2)+ (drill 1.6)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "816e15c8-42da-4293-9920-d498f8e383b5")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Diode_THT.3dshapes/Diode_Bridge_Vishay_GBU.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
gbu808.kicad_symadded+29@@ -0,0 +1,29 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "GBU808" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 5.08 0) (effects (font (size 1.27 1.27))))+ (property "Value" "GBU808" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "GBU808_0_1"+ (rectangle (start -12.70 2.54) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "GBU808_1_1"+ (pin passive line (at -17.78 0.00 0) (length 5.08)+ (name "+" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -2.54 0) (length 5.08)+ (name "~" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 0.00 180) (length 5.08)+ (name "-" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 -2.54 180) (length 5.08)+ (name "~" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
gbu808.lbradded+115@@ -0,0 +1,115 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="Diode_Bridge_Vishay_GBU">+ <description>4 pads, 18.4 x 3.2 mm. Vishay GBU rectifier package, 5.08mm pitch, see</description>+ <pad name="1" x="0.0000" y="-0.0000" drill="1.6000" diameter="3.2000" shape="square"/>+ <pad name="2" x="5.0800" y="-0.0000" drill="1.6000" diameter="3.2000" shape="round"/>+ <pad name="3" x="10.1600" y="-0.0000" drill="1.6000" diameter="3.2000" shape="round"/>+ <pad name="4" x="15.2400" y="-0.0000" drill="1.6000" diameter="3.2000" shape="round"/>+ <wire x1="-3.5000" y1="1.2000" x2="-2.0000" y2="1.2000" width="0.1200" layer="21"/>+ <wire x1="-3.5000" y1="-2.4000" x2="-3.5000" y2="1.2000" width="0.1200" layer="21"/>+ <wire x1="-0.3000" y1="-2.4000" x2="-0.3000" y2="-1.9000" width="0.1200" layer="21"/>+ <wire x1="2.0000" y1="1.2000" x2="3.5000" y2="1.2000" width="0.1200" layer="21"/>+ <wire x1="6.7000" y1="1.2000" x2="8.6000" y2="1.2000" width="0.1200" layer="21"/>+ <wire x1="11.7000" y1="1.2000" x2="13.7000" y2="1.2000" width="0.1200" layer="21"/>+ <wire x1="16.8000" y1="1.2000" x2="18.8000" y2="1.2000" width="0.1200" layer="21"/>+ <wire x1="18.8000" y1="1.2000" x2="18.8000" y2="-2.4000" width="0.1200" layer="21"/>+ <wire x1="18.8000" y1="-2.4000" x2="-3.5000" y2="-2.4000" width="0.1200" layer="21"/>+ <wire x1="-3.4000" y1="1.1000" x2="18.7000" y2="1.1000" width="0.1000" layer="51"/>+ <wire x1="-3.4000" y1="-1.3000" x2="-3.4000" y2="1.1000" width="0.1000" layer="51"/>+ <wire x1="-2.5000" y1="-2.3000" x2="-3.4000" y2="-1.3000" width="0.1000" layer="51"/>+ <wire x1="-0.3000" y1="-2.3000" x2="-0.3000" y2="1.1000" width="0.1000" layer="51"/>+ <wire x1="18.7000" y1="1.1000" x2="18.7000" y2="-2.3000" width="0.1200" layer="51"/>+ <wire x1="18.7000" y1="-2.3000" x2="-2.5000" y2="-2.3000" width="0.1000" layer="51"/>+ <text x="0" y="2.200" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-3.000" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="GBU808">+ <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+ <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+ <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="+" x="-17.78" y="0" length="middle" direction="pas"/>+ <pin name="2" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="-" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+ <pin name="3" x="17.78" y="-2.54" length="middle" direction="pas" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="GBU808" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="GBU808" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="Diode_Bridge_Vishay_GBU">+ <connects>+ <connect gate="G$1" pin="+" pad="1"/>+ <connect gate="G$1" pin="2" pad="2"/>+ <connect gate="G$1" pin="-" pad="4"/>+ <connect gate="G$1" pin="3" pad="3"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
gbu808.stepadded+1929@@ -0,0 +1,1929 @@+ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('FreeCAD Model'),'2;1'); +FILE_NAME( +'D:/KiCAD/packages3D-source/Diode_THT.3dshapes\\ +Diode_Bridge_Vishay_GBU.step','2018-01-05T14:06:24',('kicad StepUp'),( + 'ksu MCAD'),'Open CASCADE STEP processor 6.8','FreeCAD','Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft', + 'automotive_design',1997,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('Diode_Bridge_Vishay_GBU','Diode_Bridge_Vishay_GBU','',(#8) + ); +#8 = MECHANICAL_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#1539); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#59,#90,#257,#344,#431,#448,#465,#496,#560, + #584,#641,#712,#736,#800,#817,#848,#896,#920,#961,#992,#1040,#1064, + #1105,#1122,#1139,#1151,#1173,#1190,#1207,#1219,#1236,#1253,#1270, + #1287,#1304,#1316,#1333,#1350,#1367,#1384,#1401,#1413,#1430,#1447, + #1464,#1476,#1493,#1510,#1527)); +#17 = ADVANCED_FACE('',(#18),#54,.T.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#39,#47)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(18.67,-2.3,2.9)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(18.67,1.1,2.9)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(18.67,-2.3,2.9)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(17.67,1.1,1.9)); +#34 = CIRCLE('',#35,1.); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(17.67,1.1,2.9)); +#37 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#38 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#39 = ORIENTED_EDGE('',*,*,#40,.F.); +#40 = EDGE_CURVE('',#41,#32,#43,.T.); +#41 = VERTEX_POINT('',#42); +#42 = CARTESIAN_POINT('',(17.67,-2.3,1.9)); +#43 = LINE('',#44,#45); +#44 = CARTESIAN_POINT('',(17.67,-2.3,1.9)); +#45 = VECTOR('',#46,1.); +#46 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#47 = ORIENTED_EDGE('',*,*,#48,.F.); +#48 = EDGE_CURVE('',#22,#41,#49,.T.); +#49 = CIRCLE('',#50,1.); +#50 = AXIS2_PLACEMENT_3D('',#51,#52,#53); +#51 = CARTESIAN_POINT('',(17.67,-2.3,2.9)); +#52 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#53 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#54 = CYLINDRICAL_SURFACE('',#55,1.); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(17.67,-2.3,2.9)); +#57 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#58 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#59 = ADVANCED_FACE('',(#60),#85,.F.); +#60 = FACE_BOUND('',#61,.F.); +#61 = EDGE_LOOP('',(#62,#72,#78,#79)); +#62 = ORIENTED_EDGE('',*,*,#63,.T.); +#63 = EDGE_CURVE('',#64,#66,#68,.T.); +#64 = VERTEX_POINT('',#65); +#65 = CARTESIAN_POINT('',(18.67,-2.3,19.4)); +#66 = VERTEX_POINT('',#67); +#67 = CARTESIAN_POINT('',(18.67,1.1,19.4)); +#68 = LINE('',#69,#70); +#69 = CARTESIAN_POINT('',(18.67,-2.3,19.4)); +#70 = VECTOR('',#71,1.); +#71 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#72 = ORIENTED_EDGE('',*,*,#73,.T.); +#73 = EDGE_CURVE('',#66,#24,#74,.T.); +#74 = LINE('',#75,#76); +#75 = CARTESIAN_POINT('',(18.67,1.1,19.4)); +#76 = VECTOR('',#77,1.); +#77 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#78 = ORIENTED_EDGE('',*,*,#21,.F.); +#79 = ORIENTED_EDGE('',*,*,#80,.F.); +#80 = EDGE_CURVE('',#64,#22,#81,.T.); +#81 = LINE('',#82,#83); +#82 = CARTESIAN_POINT('',(18.67,-2.3,19.4)); +#83 = VECTOR('',#84,1.); +#84 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#85 = PLANE('',#86); +#86 = AXIS2_PLACEMENT_3D('',#87,#88,#89); +#87 = CARTESIAN_POINT('',(18.67,-2.3,19.4)); +#88 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#89 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#90 = ADVANCED_FACE('',(#91,#116,#150,#184,#218),#252,.F.); +#91 = FACE_BOUND('',#92,.F.); +#92 = EDGE_LOOP('',(#93,#94,#102,#110)); +#93 = ORIENTED_EDGE('',*,*,#40,.T.); +#94 = ORIENTED_EDGE('',*,*,#95,.T.); +#95 = EDGE_CURVE('',#32,#96,#98,.T.); +#96 = VERTEX_POINT('',#97); +#97 = CARTESIAN_POINT('',(-2.43,1.1,1.9)); +#98 = LINE('',#99,#100); +#99 = CARTESIAN_POINT('',(17.67,1.1,1.9)); +#100 = VECTOR('',#101,1.); +#101 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#102 = ORIENTED_EDGE('',*,*,#103,.F.); +#103 = EDGE_CURVE('',#104,#96,#106,.T.); +#104 = VERTEX_POINT('',#105); +#105 = CARTESIAN_POINT('',(-2.43,-2.3,1.9)); +#106 = LINE('',#107,#108); +#107 = CARTESIAN_POINT('',(-2.43,-2.3,1.9)); +#108 = VECTOR('',#109,1.); +#109 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#110 = ORIENTED_EDGE('',*,*,#111,.F.); +#111 = EDGE_CURVE('',#41,#104,#112,.T.); +#112 = LINE('',#113,#114); +#113 = CARTESIAN_POINT('',(17.67,-2.3,1.9)); +#114 = VECTOR('',#115,1.); +#115 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#116 = FACE_BOUND('',#117,.F.); +#117 = EDGE_LOOP('',(#118,#128,#136,#144)); +#118 = ORIENTED_EDGE('',*,*,#119,.F.); +#119 = EDGE_CURVE('',#120,#122,#124,.T.); +#120 = VERTEX_POINT('',#121); +#121 = CARTESIAN_POINT('',(11.16,-0.25,1.9)); +#122 = VERTEX_POINT('',#123); +#123 = CARTESIAN_POINT('',(11.16,0.25,1.9)); +#124 = LINE('',#125,#126); +#125 = CARTESIAN_POINT('',(11.16,-1.025,1.9)); +#126 = VECTOR('',#127,1.); +#127 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#128 = ORIENTED_EDGE('',*,*,#129,.T.); +#129 = EDGE_CURVE('',#120,#130,#132,.T.); +#130 = VERTEX_POINT('',#131); +#131 = CARTESIAN_POINT('',(9.16,-0.25,1.9)); +#132 = LINE('',#133,#134); +#133 = CARTESIAN_POINT('',(13.415,-0.25,1.9)); +#134 = VECTOR('',#135,1.); +#135 = DIRECTION('',(-1.,-1.748661062939E-031,2.536326566618E-017)); +#136 = ORIENTED_EDGE('',*,*,#137,.T.); +#137 = EDGE_CURVE('',#130,#138,#140,.T.); +#138 = VERTEX_POINT('',#139); +#139 = CARTESIAN_POINT('',(9.16,0.25,1.9)); +#140 = LINE('',#141,#142); +#141 = CARTESIAN_POINT('',(9.16,-1.025,1.9)); +#142 = VECTOR('',#143,1.); +#143 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#144 = ORIENTED_EDGE('',*,*,#145,.F.); +#145 = EDGE_CURVE('',#122,#138,#146,.T.); +#146 = LINE('',#147,#148); +#147 = CARTESIAN_POINT('',(13.415,0.25,1.9)); +#148 = VECTOR('',#149,1.); +#149 = DIRECTION('',(-1.,-1.748661062939E-031,2.536326566618E-017)); +#150 = FACE_BOUND('',#151,.F.); +#151 = EDGE_LOOP('',(#152,#162,#170,#178)); +#152 = ORIENTED_EDGE('',*,*,#153,.F.); +#153 = EDGE_CURVE('',#154,#156,#158,.T.); +#154 = VERTEX_POINT('',#155); +#155 = CARTESIAN_POINT('',(6.08,0.25,1.9)); +#156 = VERTEX_POINT('',#157); +#157 = CARTESIAN_POINT('',(4.08,0.25,1.9)); +#158 = LINE('',#159,#160); +#159 = CARTESIAN_POINT('',(10.875,0.25,1.9)); +#160 = VECTOR('',#161,1.); +#161 = DIRECTION('',(-1.,1.689532891337E-032,2.536326566618E-017)); +#162 = ORIENTED_EDGE('',*,*,#163,.F.); +#163 = EDGE_CURVE('',#164,#154,#166,.T.); +#164 = VERTEX_POINT('',#165); +#165 = CARTESIAN_POINT('',(6.08,-0.25,1.9)); +#166 = LINE('',#167,#168); +#167 = CARTESIAN_POINT('',(6.08,-1.025,1.9)); +#168 = VECTOR('',#169,1.); +#169 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#170 = ORIENTED_EDGE('',*,*,#171,.T.); +#171 = EDGE_CURVE('',#164,#172,#174,.T.); +#172 = VERTEX_POINT('',#173); +#173 = CARTESIAN_POINT('',(4.08,-0.25,1.9)); +#174 = LINE('',#175,#176); +#175 = CARTESIAN_POINT('',(10.875,-0.25,1.9)); +#176 = VECTOR('',#177,1.); +#177 = DIRECTION('',(-1.,1.689532891337E-032,2.536326566618E-017)); +#178 = ORIENTED_EDGE('',*,*,#179,.T.); +#179 = EDGE_CURVE('',#172,#156,#180,.T.); +#180 = LINE('',#181,#182); +#181 = CARTESIAN_POINT('',(4.08,-1.025,1.9)); +#182 = VECTOR('',#183,1.); +#183 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#184 = FACE_BOUND('',#185,.F.); +#185 = EDGE_LOOP('',(#186,#196,#204,#212)); +#186 = ORIENTED_EDGE('',*,*,#187,.T.); +#187 = EDGE_CURVE('',#188,#190,#192,.T.); +#188 = VERTEX_POINT('',#189); +#189 = CARTESIAN_POINT('',(0.5,0.25,1.9)); +#190 = VERTEX_POINT('',#191); +#191 = CARTESIAN_POINT('',(0.5,-0.25,1.9)); +#192 = LINE('',#193,#194); +#193 = CARTESIAN_POINT('',(0.5,-1.025,1.9)); +#194 = VECTOR('',#195,1.); +#195 = DIRECTION('',(-0.E+000,-1.,-2.22044604925E-016)); +#196 = ORIENTED_EDGE('',*,*,#197,.T.); +#197 = EDGE_CURVE('',#190,#198,#200,.T.); +#198 = VERTEX_POINT('',#199); +#199 = CARTESIAN_POINT('',(-2.04,-0.25,1.9)); +#200 = LINE('',#201,#202); +#201 = CARTESIAN_POINT('',(7.815,-0.25,1.9)); +#202 = VECTOR('',#203,1.); +#203 = DIRECTION('',(-1.,1.689532891337E-032,2.536326566618E-017)); +#204 = ORIENTED_EDGE('',*,*,#205,.T.); +#205 = EDGE_CURVE('',#198,#206,#208,.T.); +#206 = VERTEX_POINT('',#207); +#207 = CARTESIAN_POINT('',(-2.04,0.25,1.9)); +#208 = LINE('',#209,#210); +#209 = CARTESIAN_POINT('',(-2.04,-1.025,1.9)); +#210 = VECTOR('',#211,1.); +#211 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#212 = ORIENTED_EDGE('',*,*,#213,.F.); +#213 = EDGE_CURVE('',#188,#206,#214,.T.); +#214 = LINE('',#215,#216); +#215 = CARTESIAN_POINT('',(7.815,0.25,1.9)); +#216 = VECTOR('',#217,1.); +#217 = DIRECTION('',(-1.,1.689532891337E-032,2.536326566618E-017)); +#218 = FACE_BOUND('',#219,.F.); +#219 = EDGE_LOOP('',(#220,#230,#238,#246)); +#220 = ORIENTED_EDGE('',*,*,#221,.F.); +#221 = EDGE_CURVE('',#222,#224,#226,.T.); +#222 = VERTEX_POINT('',#223); +#223 = CARTESIAN_POINT('',(17.28,-0.25,1.9)); +#224 = VERTEX_POINT('',#225); +#225 = CARTESIAN_POINT('',(17.28,0.25,1.9)); +#226 = LINE('',#227,#228); +#227 = CARTESIAN_POINT('',(17.28,-1.025,1.9)); +#228 = VECTOR('',#229,1.); +#229 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#230 = ORIENTED_EDGE('',*,*,#231,.T.); +#231 = EDGE_CURVE('',#222,#232,#234,.T.); +#232 = VERTEX_POINT('',#233); +#233 = CARTESIAN_POINT('',(14.74,-0.25,1.9)); +#234 = LINE('',#235,#236); +#235 = CARTESIAN_POINT('',(16.205,-0.25,1.9)); +#236 = VECTOR('',#237,1.); +#237 = DIRECTION('',(-1.,1.689532891337E-032,2.536326566618E-017)); +#238 = ORIENTED_EDGE('',*,*,#239,.T.); +#239 = EDGE_CURVE('',#232,#240,#242,.T.); +#240 = VERTEX_POINT('',#241); +#241 = CARTESIAN_POINT('',(14.74,0.25,1.9)); +#242 = LINE('',#243,#244); +#243 = CARTESIAN_POINT('',(14.74,-1.025,1.9)); +#244 = VECTOR('',#245,1.); +#245 = DIRECTION('',(0.E+000,1.,2.22044604925E-016)); +#246 = ORIENTED_EDGE('',*,*,#247,.F.); +#247 = EDGE_CURVE('',#224,#240,#248,.T.); +#248 = LINE('',#249,#250); +#249 = CARTESIAN_POINT('',(16.205,0.25,1.9)); +#250 = VECTOR('',#251,1.); +#251 = DIRECTION('',(-1.,1.689532891337E-032,2.536326566618E-017)); +#252 = PLANE('',#253); +#253 = AXIS2_PLACEMENT_3D('',#254,#255,#256); +#254 = CARTESIAN_POINT('',(17.67,-2.3,1.9)); +#255 = DIRECTION('',(2.536326566618E-017,-2.22044604925E-016,1.)); +#256 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#257 = ADVANCED_FACE('',(#258,#303),#339,.T.); +#258 = FACE_BOUND('',#259,.F.); +#259 = EDGE_LOOP('',(#260,#261,#270,#278,#286,#294,#301,#302)); +#260 = ORIENTED_EDGE('',*,*,#111,.T.); +#261 = ORIENTED_EDGE('',*,*,#262,.T.); +#262 = EDGE_CURVE('',#104,#263,#265,.T.); +#263 = VERTEX_POINT('',#264); +#264 = CARTESIAN_POINT('',(-3.43,-2.3,2.9)); +#265 = CIRCLE('',#266,1.); +#266 = AXIS2_PLACEMENT_3D('',#267,#268,#269); +#267 = CARTESIAN_POINT('',(-2.43,-2.3,2.9)); +#268 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#269 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#270 = ORIENTED_EDGE('',*,*,#271,.T.); +#271 = EDGE_CURVE('',#263,#272,#274,.T.); +#272 = VERTEX_POINT('',#273); +#273 = CARTESIAN_POINT('',(-3.43,-2.3,17.2)); +#274 = LINE('',#275,#276); +#275 = CARTESIAN_POINT('',(-3.43,-2.3,2.9)); +#276 = VECTOR('',#277,1.); +#277 = DIRECTION('',(2.536326566618E-017,-2.22044604925E-016,1.)); +#278 = ORIENTED_EDGE('',*,*,#279,.T.); +#279 = EDGE_CURVE('',#272,#280,#282,.T.); +#280 = VERTEX_POINT('',#281); +#281 = CARTESIAN_POINT('',(-0.23,-2.3,20.4)); +#282 = LINE('',#283,#284); +#283 = CARTESIAN_POINT('',(-3.43,-2.3,17.2)); +#284 = VECTOR('',#285,1.); +#285 = DIRECTION('',(0.707106781187,-2.256703143463E-016,0.707106781187) + ); +#286 = ORIENTED_EDGE('',*,*,#287,.T.); +#287 = EDGE_CURVE('',#280,#288,#290,.T.); +#288 = VERTEX_POINT('',#289); +#289 = CARTESIAN_POINT('',(17.67,-2.3,20.4)); +#290 = LINE('',#291,#292); +#291 = CARTESIAN_POINT('',(-0.23,-2.3,20.4)); +#292 = VECTOR('',#293,1.); +#293 = DIRECTION('',(1.,-9.710141424855E-017,-2.536326566618E-017)); +#294 = ORIENTED_EDGE('',*,*,#295,.T.); +#295 = EDGE_CURVE('',#288,#64,#296,.T.); +#296 = CIRCLE('',#297,1.); +#297 = AXIS2_PLACEMENT_3D('',#298,#299,#300); +#298 = CARTESIAN_POINT('',(17.67,-2.3,19.4)); +#299 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#300 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#301 = ORIENTED_EDGE('',*,*,#80,.T.); +#302 = ORIENTED_EDGE('',*,*,#48,.T.); +#303 = FACE_BOUND('',#304,.T.); +#304 = EDGE_LOOP('',(#305,#316,#324,#333)); +#305 = ORIENTED_EDGE('',*,*,#306,.T.); +#306 = EDGE_CURVE('',#307,#309,#311,.T.); +#307 = VERTEX_POINT('',#308); +#308 = CARTESIAN_POINT('',(5.72,-2.3,12.8)); +#309 = VERTEX_POINT('',#310); +#310 = CARTESIAN_POINT('',(9.52,-2.3,12.8)); +#311 = CIRCLE('',#312,1.9); +#312 = AXIS2_PLACEMENT_3D('',#313,#314,#315); +#313 = CARTESIAN_POINT('',(7.62,-2.3,12.8)); +#314 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#315 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#316 = ORIENTED_EDGE('',*,*,#317,.T.); +#317 = EDGE_CURVE('',#309,#318,#320,.T.); +#318 = VERTEX_POINT('',#319); +#319 = CARTESIAN_POINT('',(9.52,-2.3,10.95)); +#320 = LINE('',#321,#322); +#321 = CARTESIAN_POINT('',(9.52,-2.3,12.8)); +#322 = VECTOR('',#323,1.); +#323 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#324 = ORIENTED_EDGE('',*,*,#325,.T.); +#325 = EDGE_CURVE('',#318,#326,#328,.T.); +#326 = VERTEX_POINT('',#327); +#327 = CARTESIAN_POINT('',(5.72,-2.3,10.950000000001)); +#328 = CIRCLE('',#329,1.9); +#329 = AXIS2_PLACEMENT_3D('',#330,#331,#332); +#330 = CARTESIAN_POINT('',(7.62,-2.3,10.95)); +#331 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#332 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#333 = ORIENTED_EDGE('',*,*,#334,.F.); +#334 = EDGE_CURVE('',#307,#326,#335,.T.); +#335 = LINE('',#336,#337); +#336 = CARTESIAN_POINT('',(5.72,-2.3,12.8)); +#337 = VECTOR('',#338,1.); +#338 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#339 = PLANE('',#340); +#340 = AXIS2_PLACEMENT_3D('',#341,#342,#343); +#341 = CARTESIAN_POINT('',(17.67,-2.3,1.9)); +#342 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#343 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#344 = ADVANCED_FACE('',(#345,#390),#426,.F.); +#345 = FACE_BOUND('',#346,.T.); +#346 = EDGE_LOOP('',(#347,#348,#357,#365,#373,#381,#388,#389)); +#347 = ORIENTED_EDGE('',*,*,#95,.T.); +#348 = ORIENTED_EDGE('',*,*,#349,.T.); +#349 = EDGE_CURVE('',#96,#350,#352,.T.); +#350 = VERTEX_POINT('',#351); +#351 = CARTESIAN_POINT('',(-3.43,1.1,2.9)); +#352 = CIRCLE('',#353,1.); +#353 = AXIS2_PLACEMENT_3D('',#354,#355,#356); +#354 = CARTESIAN_POINT('',(-2.43,1.1,2.9)); +#355 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#356 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#357 = ORIENTED_EDGE('',*,*,#358,.T.); +#358 = EDGE_CURVE('',#350,#359,#361,.T.); +#359 = VERTEX_POINT('',#360); +#360 = CARTESIAN_POINT('',(-3.43,1.1,17.2)); +#361 = LINE('',#362,#363); +#362 = CARTESIAN_POINT('',(-3.43,1.1,2.9)); +#363 = VECTOR('',#364,1.); +#364 = DIRECTION('',(2.536326566618E-017,-2.22044604925E-016,1.)); +#365 = ORIENTED_EDGE('',*,*,#366,.T.); +#366 = EDGE_CURVE('',#359,#367,#369,.T.); +#367 = VERTEX_POINT('',#368); +#368 = CARTESIAN_POINT('',(-0.23,1.1,20.4)); +#369 = LINE('',#370,#371); +#370 = CARTESIAN_POINT('',(-3.43,1.1,17.2)); +#371 = VECTOR('',#372,1.); +#372 = DIRECTION('',(0.707106781187,-2.256703143463E-016,0.707106781187) + ); +#373 = ORIENTED_EDGE('',*,*,#374,.T.); +#374 = EDGE_CURVE('',#367,#375,#377,.T.); +#375 = VERTEX_POINT('',#376); +#376 = CARTESIAN_POINT('',(17.67,1.1,20.4)); +#377 = LINE('',#378,#379); +#378 = CARTESIAN_POINT('',(-0.23,1.1,20.4)); +#379 = VECTOR('',#380,1.); +#380 = DIRECTION('',(1.,-9.710141424855E-017,-2.536326566618E-017)); +#381 = ORIENTED_EDGE('',*,*,#382,.T.); +#382 = EDGE_CURVE('',#375,#66,#383,.T.); +#383 = CIRCLE('',#384,1.); +#384 = AXIS2_PLACEMENT_3D('',#385,#386,#387); +#385 = CARTESIAN_POINT('',(17.67,1.1,19.4)); +#386 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#387 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#388 = ORIENTED_EDGE('',*,*,#73,.T.); +#389 = ORIENTED_EDGE('',*,*,#31,.T.); +#390 = FACE_BOUND('',#391,.F.); +#391 = EDGE_LOOP('',(#392,#403,#411,#420)); +#392 = ORIENTED_EDGE('',*,*,#393,.T.); +#393 = EDGE_CURVE('',#394,#396,#398,.T.); +#394 = VERTEX_POINT('',#395); +#395 = CARTESIAN_POINT('',(5.72,1.1,12.8)); +#396 = VERTEX_POINT('',#397); +#397 = CARTESIAN_POINT('',(9.52,1.1,12.8)); +#398 = CIRCLE('',#399,1.9); +#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402); +#400 = CARTESIAN_POINT('',(7.62,1.1,12.8)); +#401 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#402 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#403 = ORIENTED_EDGE('',*,*,#404,.T.); +#404 = EDGE_CURVE('',#396,#405,#407,.T.); +#405 = VERTEX_POINT('',#406); +#406 = CARTESIAN_POINT('',(9.52,1.1,10.95)); +#407 = LINE('',#408,#409); +#408 = CARTESIAN_POINT('',(9.52,1.1,12.8)); +#409 = VECTOR('',#410,1.); +#410 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#411 = ORIENTED_EDGE('',*,*,#412,.T.); +#412 = EDGE_CURVE('',#405,#413,#415,.T.); +#413 = VERTEX_POINT('',#414); +#414 = CARTESIAN_POINT('',(5.72,1.1,10.950000000001)); +#415 = CIRCLE('',#416,1.9); +#416 = AXIS2_PLACEMENT_3D('',#417,#418,#419); +#417 = CARTESIAN_POINT('',(7.62,1.1,10.95)); +#418 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#419 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#420 = ORIENTED_EDGE('',*,*,#421,.F.); +#421 = EDGE_CURVE('',#394,#413,#422,.T.); +#422 = LINE('',#423,#424); +#423 = CARTESIAN_POINT('',(5.72,1.1,12.8)); +#424 = VECTOR('',#425,1.); +#425 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#426 = PLANE('',#427); +#427 = AXIS2_PLACEMENT_3D('',#428,#429,#430); +#428 = CARTESIAN_POINT('',(17.67,1.1,1.9)); +#429 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#430 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#431 = ADVANCED_FACE('',(#432),#443,.T.); +#432 = FACE_BOUND('',#433,.F.); +#433 = EDGE_LOOP('',(#434,#440,#441,#442)); +#434 = ORIENTED_EDGE('',*,*,#435,.T.); +#435 = EDGE_CURVE('',#288,#375,#436,.T.); +#436 = LINE('',#437,#438); +#437 = CARTESIAN_POINT('',(17.67,-2.3,20.4)); +#438 = VECTOR('',#439,1.); +#439 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#440 = ORIENTED_EDGE('',*,*,#382,.T.); +#441 = ORIENTED_EDGE('',*,*,#63,.F.); +#442 = ORIENTED_EDGE('',*,*,#295,.F.); +#443 = CYLINDRICAL_SURFACE('',#444,1.); +#444 = AXIS2_PLACEMENT_3D('',#445,#446,#447); +#445 = CARTESIAN_POINT('',(17.67,-2.3,19.4)); +#446 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#447 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#448 = ADVANCED_FACE('',(#449),#460,.T.); +#449 = FACE_BOUND('',#450,.F.); +#450 = EDGE_LOOP('',(#451,#452,#453,#459)); +#451 = ORIENTED_EDGE('',*,*,#103,.T.); +#452 = ORIENTED_EDGE('',*,*,#349,.T.); +#453 = ORIENTED_EDGE('',*,*,#454,.F.); +#454 = EDGE_CURVE('',#263,#350,#455,.T.); +#455 = LINE('',#456,#457); +#456 = CARTESIAN_POINT('',(-3.43,-2.3,2.9)); +#457 = VECTOR('',#458,1.); +#458 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#459 = ORIENTED_EDGE('',*,*,#262,.F.); +#460 = CYLINDRICAL_SURFACE('',#461,1.); +#461 = AXIS2_PLACEMENT_3D('',#462,#463,#464); +#462 = CARTESIAN_POINT('',(-2.43,-2.3,2.9)); +#463 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#464 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#465 = ADVANCED_FACE('',(#466),#491,.T.); +#466 = FACE_BOUND('',#467,.T.); +#467 = EDGE_LOOP('',(#468,#476,#477,#485)); +#468 = ORIENTED_EDGE('',*,*,#469,.F.); +#469 = EDGE_CURVE('',#122,#470,#472,.T.); +#470 = VERTEX_POINT('',#471); +#471 = CARTESIAN_POINT('',(11.16,0.25,-5.6881E-002)); +#472 = LINE('',#473,#474); +#473 = CARTESIAN_POINT('',(11.16,0.25,2.)); +#474 = VECTOR('',#475,1.); +#475 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#476 = ORIENTED_EDGE('',*,*,#119,.F.); +#477 = ORIENTED_EDGE('',*,*,#478,.T.); +#478 = EDGE_CURVE('',#120,#479,#481,.T.); +#479 = VERTEX_POINT('',#480); +#480 = CARTESIAN_POINT('',(11.16,-0.25,-5.6881E-002)); +#481 = LINE('',#482,#483); +#482 = CARTESIAN_POINT('',(11.16,-0.25,2.)); +#483 = VECTOR('',#484,1.); +#484 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#485 = ORIENTED_EDGE('',*,*,#486,.F.); +#486 = EDGE_CURVE('',#470,#479,#487,.T.); +#487 = LINE('',#488,#489); +#488 = CARTESIAN_POINT('',(11.16,0.25,-5.6881E-002)); +#489 = VECTOR('',#490,1.); +#490 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#491 = PLANE('',#492); +#492 = AXIS2_PLACEMENT_3D('',#493,#494,#495); +#493 = CARTESIAN_POINT('',(11.16,0.25,2.)); +#494 = DIRECTION('',(1.,0.E+000,0.E+000)); +#495 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#496 = ADVANCED_FACE('',(#497),#555,.T.); +#497 = FACE_BOUND('',#498,.T.); +#498 = EDGE_LOOP('',(#499,#507,#508,#509,#517,#525,#533,#541,#549)); +#499 = ORIENTED_EDGE('',*,*,#500,.F.); +#500 = EDGE_CURVE('',#138,#501,#503,.T.); +#501 = VERTEX_POINT('',#502); +#502 = CARTESIAN_POINT('',(9.16,0.25,-5.6881E-002)); +#503 = LINE('',#504,#505); +#504 = CARTESIAN_POINT('',(9.16,0.25,2.)); +#505 = VECTOR('',#506,1.); +#506 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#507 = ORIENTED_EDGE('',*,*,#145,.F.); +#508 = ORIENTED_EDGE('',*,*,#469,.T.); +#509 = ORIENTED_EDGE('',*,*,#510,.T.); +#510 = EDGE_CURVE('',#470,#511,#513,.T.); +#511 = VERTEX_POINT('',#512); +#512 = CARTESIAN_POINT('',(10.66,0.25,-5.6881E-002)); +#513 = LINE('',#514,#515); +#514 = CARTESIAN_POINT('',(11.16,0.25,-5.6881E-002)); +#515 = VECTOR('',#516,1.); +#516 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#517 = ORIENTED_EDGE('',*,*,#518,.T.); +#518 = EDGE_CURVE('',#511,#519,#521,.T.); +#519 = VERTEX_POINT('',#520); +#520 = CARTESIAN_POINT('',(10.66,0.25,-15.)); +#521 = LINE('',#522,#523); +#522 = CARTESIAN_POINT('',(10.66,0.25,-5.6881E-002)); +#523 = VECTOR('',#524,1.); +#524 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#525 = ORIENTED_EDGE('',*,*,#526,.F.); +#526 = EDGE_CURVE('',#527,#519,#529,.T.); +#527 = VERTEX_POINT('',#528); +#528 = CARTESIAN_POINT('',(10.16,0.25,-16.)); +#529 = LINE('',#530,#531); +#530 = CARTESIAN_POINT('',(10.16,0.25,-16.)); +#531 = VECTOR('',#532,1.); +#532 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#533 = ORIENTED_EDGE('',*,*,#534,.F.); +#534 = EDGE_CURVE('',#535,#527,#537,.T.); +#535 = VERTEX_POINT('',#536); +#536 = CARTESIAN_POINT('',(9.66,0.25,-15.)); +#537 = LINE('',#538,#539); +#538 = CARTESIAN_POINT('',(9.66,0.25,-15.)); +#539 = VECTOR('',#540,1.); +#540 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#541 = ORIENTED_EDGE('',*,*,#542,.F.); +#542 = EDGE_CURVE('',#543,#535,#545,.T.); +#543 = VERTEX_POINT('',#544); +#544 = CARTESIAN_POINT('',(9.66,0.25,-5.6881E-002)); +#545 = LINE('',#546,#547); +#546 = CARTESIAN_POINT('',(9.66,0.25,-5.6881E-002)); +#547 = VECTOR('',#548,1.); +#548 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#549 = ORIENTED_EDGE('',*,*,#550,.F.); +#550 = EDGE_CURVE('',#501,#543,#551,.T.); +#551 = LINE('',#552,#553); +#552 = CARTESIAN_POINT('',(9.16,0.25,-5.6881E-002)); +#553 = VECTOR('',#554,1.); +#554 = DIRECTION('',(1.,0.E+000,0.E+000)); +#555 = PLANE('',#556); +#556 = AXIS2_PLACEMENT_3D('',#557,#558,#559); +#557 = CARTESIAN_POINT('',(9.16,0.25,2.)); +#558 = DIRECTION('',(-1.917614352072E-031,1.,-6.661338147751E-016)); +#559 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#560 = ADVANCED_FACE('',(#561),#579,.F.); +#561 = FACE_BOUND('',#562,.F.); +#562 = EDGE_LOOP('',(#563,#564,#565,#573)); +#563 = ORIENTED_EDGE('',*,*,#500,.F.); +#564 = ORIENTED_EDGE('',*,*,#137,.F.); +#565 = ORIENTED_EDGE('',*,*,#566,.T.); +#566 = EDGE_CURVE('',#130,#567,#569,.T.); +#567 = VERTEX_POINT('',#568); +#568 = CARTESIAN_POINT('',(9.16,-0.25,-5.6881E-002)); +#569 = LINE('',#570,#571); +#570 = CARTESIAN_POINT('',(9.16,-0.25,2.)); +#571 = VECTOR('',#572,1.); +#572 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#573 = ORIENTED_EDGE('',*,*,#574,.F.); +#574 = EDGE_CURVE('',#501,#567,#575,.T.); +#575 = LINE('',#576,#577); +#576 = CARTESIAN_POINT('',(9.16,0.25,-5.6881E-002)); +#577 = VECTOR('',#578,1.); +#578 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#579 = PLANE('',#580); +#580 = AXIS2_PLACEMENT_3D('',#581,#582,#583); +#581 = CARTESIAN_POINT('',(9.16,0.25,2.)); +#582 = DIRECTION('',(1.,0.E+000,0.E+000)); +#583 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#584 = ADVANCED_FACE('',(#585),#636,.F.); +#585 = FACE_BOUND('',#586,.F.); +#586 = EDGE_LOOP('',(#587,#588,#589,#590,#598,#606,#614,#622,#630)); +#587 = ORIENTED_EDGE('',*,*,#566,.F.); +#588 = ORIENTED_EDGE('',*,*,#129,.F.); +#589 = ORIENTED_EDGE('',*,*,#478,.T.); +#590 = ORIENTED_EDGE('',*,*,#591,.T.); +#591 = EDGE_CURVE('',#479,#592,#594,.T.); +#592 = VERTEX_POINT('',#593); +#593 = CARTESIAN_POINT('',(10.66,-0.25,-5.6881E-002)); +#594 = LINE('',#595,#596); +#595 = CARTESIAN_POINT('',(11.16,-0.25,-5.6881E-002)); +#596 = VECTOR('',#597,1.); +#597 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#598 = ORIENTED_EDGE('',*,*,#599,.T.); +#599 = EDGE_CURVE('',#592,#600,#602,.T.); +#600 = VERTEX_POINT('',#601); +#601 = CARTESIAN_POINT('',(10.66,-0.25,-15.)); +#602 = LINE('',#603,#604); +#603 = CARTESIAN_POINT('',(10.66,-0.25,-5.6881E-002)); +#604 = VECTOR('',#605,1.); +#605 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#606 = ORIENTED_EDGE('',*,*,#607,.F.); +#607 = EDGE_CURVE('',#608,#600,#610,.T.); +#608 = VERTEX_POINT('',#609); +#609 = CARTESIAN_POINT('',(10.16,-0.25,-16.)); +#610 = LINE('',#611,#612); +#611 = CARTESIAN_POINT('',(10.16,-0.25,-16.)); +#612 = VECTOR('',#613,1.); +#613 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#614 = ORIENTED_EDGE('',*,*,#615,.F.); +#615 = EDGE_CURVE('',#616,#608,#618,.T.); +#616 = VERTEX_POINT('',#617); +#617 = CARTESIAN_POINT('',(9.66,-0.25,-15.)); +#618 = LINE('',#619,#620); +#619 = CARTESIAN_POINT('',(9.66,-0.25,-15.)); +#620 = VECTOR('',#621,1.); +#621 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#622 = ORIENTED_EDGE('',*,*,#623,.F.); +#623 = EDGE_CURVE('',#624,#616,#626,.T.); +#624 = VERTEX_POINT('',#625); +#625 = CARTESIAN_POINT('',(9.66,-0.25,-5.6881E-002)); +#626 = LINE('',#627,#628); +#627 = CARTESIAN_POINT('',(9.66,-0.25,-5.6881E-002)); +#628 = VECTOR('',#629,1.); +#629 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#630 = ORIENTED_EDGE('',*,*,#631,.F.); +#631 = EDGE_CURVE('',#567,#624,#632,.T.); +#632 = LINE('',#633,#634); +#633 = CARTESIAN_POINT('',(9.16,-0.25,-5.6881E-002)); +#634 = VECTOR('',#635,1.); +#635 = DIRECTION('',(1.,0.E+000,0.E+000)); +#636 = PLANE('',#637); +#637 = AXIS2_PLACEMENT_3D('',#638,#639,#640); +#638 = CARTESIAN_POINT('',(9.16,-0.25,2.)); +#639 = DIRECTION('',(-1.917614352072E-031,1.,-6.661338147751E-016)); +#640 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#641 = ADVANCED_FACE('',(#642),#707,.T.); +#642 = FACE_BOUND('',#643,.T.); +#643 = EDGE_LOOP('',(#644,#652,#653,#661,#669,#677,#685,#693,#701)); +#644 = ORIENTED_EDGE('',*,*,#645,.F.); +#645 = EDGE_CURVE('',#156,#646,#648,.T.); +#646 = VERTEX_POINT('',#647); +#647 = CARTESIAN_POINT('',(4.08,0.25,-8.357858070397E-017)); +#648 = LINE('',#649,#650); +#649 = CARTESIAN_POINT('',(4.08,0.25,2.)); +#650 = VECTOR('',#651,1.); +#651 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#652 = ORIENTED_EDGE('',*,*,#153,.F.); +#653 = ORIENTED_EDGE('',*,*,#654,.T.); +#654 = EDGE_CURVE('',#154,#655,#657,.T.); +#655 = VERTEX_POINT('',#656); +#656 = CARTESIAN_POINT('',(6.08,0.25,-1.110223024625E-016)); +#657 = LINE('',#658,#659); +#658 = CARTESIAN_POINT('',(6.08,0.25,2.)); +#659 = VECTOR('',#660,1.); +#660 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#661 = ORIENTED_EDGE('',*,*,#662,.T.); +#662 = EDGE_CURVE('',#655,#663,#665,.T.); +#663 = VERTEX_POINT('',#664); +#664 = CARTESIAN_POINT('',(5.58,0.25,-1.110223024625E-016)); +#665 = LINE('',#666,#667); +#666 = CARTESIAN_POINT('',(6.08,0.25,-1.110223024625E-016)); +#667 = VECTOR('',#668,1.); +#668 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#669 = ORIENTED_EDGE('',*,*,#670,.T.); +#670 = EDGE_CURVE('',#663,#671,#673,.T.); +#671 = VERTEX_POINT('',#672); +#672 = CARTESIAN_POINT('',(5.58,0.25,-15.)); +#673 = LINE('',#674,#675); +#674 = CARTESIAN_POINT('',(5.58,0.25,-1.110223024625E-016)); +#675 = VECTOR('',#676,1.); +#676 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#677 = ORIENTED_EDGE('',*,*,#678,.F.); +#678 = EDGE_CURVE('',#679,#671,#681,.T.); +#679 = VERTEX_POINT('',#680); +#680 = CARTESIAN_POINT('',(5.08,0.25,-16.)); +#681 = LINE('',#682,#683); +#682 = CARTESIAN_POINT('',(5.08,0.25,-16.)); +#683 = VECTOR('',#684,1.); +#684 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#685 = ORIENTED_EDGE('',*,*,#686,.F.); +#686 = EDGE_CURVE('',#687,#679,#689,.T.); +#687 = VERTEX_POINT('',#688); +#688 = CARTESIAN_POINT('',(4.58,0.25,-15.)); +#689 = LINE('',#690,#691); +#690 = CARTESIAN_POINT('',(4.58,0.25,-15.)); +#691 = VECTOR('',#692,1.); +#692 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#693 = ORIENTED_EDGE('',*,*,#694,.F.); +#694 = EDGE_CURVE('',#695,#687,#697,.T.); +#695 = VERTEX_POINT('',#696); +#696 = CARTESIAN_POINT('',(4.58,0.25,-5.613487203161E-017)); +#697 = LINE('',#698,#699); +#698 = CARTESIAN_POINT('',(4.58,0.25,-5.613487203161E-017)); +#699 = VECTOR('',#700,1.); +#700 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#701 = ORIENTED_EDGE('',*,*,#702,.F.); +#702 = EDGE_CURVE('',#646,#695,#703,.T.); +#703 = LINE('',#704,#705); +#704 = CARTESIAN_POINT('',(4.08,0.25,-5.613487203161E-017)); +#705 = VECTOR('',#706,1.); +#706 = DIRECTION('',(1.,0.E+000,0.E+000)); +#707 = PLANE('',#708); +#708 = AXIS2_PLACEMENT_3D('',#709,#710,#711); +#709 = CARTESIAN_POINT('',(4.08,0.25,2.)); +#710 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#711 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#712 = ADVANCED_FACE('',(#713),#731,.F.); +#713 = FACE_BOUND('',#714,.F.); +#714 = EDGE_LOOP('',(#715,#716,#717,#725)); +#715 = ORIENTED_EDGE('',*,*,#645,.F.); +#716 = ORIENTED_EDGE('',*,*,#179,.F.); +#717 = ORIENTED_EDGE('',*,*,#718,.T.); +#718 = EDGE_CURVE('',#172,#719,#721,.T.); +#719 = VERTEX_POINT('',#720); +#720 = CARTESIAN_POINT('',(4.08,-0.25,1.384660242211E-016)); +#721 = LINE('',#722,#723); +#722 = CARTESIAN_POINT('',(4.08,-0.25,2.)); +#723 = VECTOR('',#724,1.); +#724 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#725 = ORIENTED_EDGE('',*,*,#726,.F.); +#726 = EDGE_CURVE('',#646,#719,#727,.T.); +#727 = LINE('',#728,#729); +#728 = CARTESIAN_POINT('',(4.08,0.25,-8.357858070397E-017)); +#729 = VECTOR('',#730,1.); +#730 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#731 = PLANE('',#732); +#732 = AXIS2_PLACEMENT_3D('',#733,#734,#735); +#733 = CARTESIAN_POINT('',(4.08,0.25,2.)); +#734 = DIRECTION('',(1.,0.E+000,0.E+000)); +#735 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#736 = ADVANCED_FACE('',(#737),#795,.F.); +#737 = FACE_BOUND('',#738,.F.); +#738 = EDGE_LOOP('',(#739,#740,#741,#749,#757,#765,#773,#781,#789)); +#739 = ORIENTED_EDGE('',*,*,#718,.F.); +#740 = ORIENTED_EDGE('',*,*,#171,.F.); +#741 = ORIENTED_EDGE('',*,*,#742,.T.); +#742 = EDGE_CURVE('',#164,#743,#745,.T.); +#743 = VERTEX_POINT('',#744); +#744 = CARTESIAN_POINT('',(6.08,-0.25,1.110223024625E-016)); +#745 = LINE('',#746,#747); +#746 = CARTESIAN_POINT('',(6.08,-0.25,2.)); +#747 = VECTOR('',#748,1.); +#748 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#749 = ORIENTED_EDGE('',*,*,#750,.T.); +#750 = EDGE_CURVE('',#743,#751,#753,.T.); +#751 = VERTEX_POINT('',#752); +#752 = CARTESIAN_POINT('',(5.58,-0.25,1.110223024625E-016)); +#753 = LINE('',#754,#755); +#754 = CARTESIAN_POINT('',(6.08,-0.25,1.110223024625E-016)); +#755 = VECTOR('',#756,1.); +#756 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#757 = ORIENTED_EDGE('',*,*,#758,.T.); +#758 = EDGE_CURVE('',#751,#759,#761,.T.); +#759 = VERTEX_POINT('',#760); +#760 = CARTESIAN_POINT('',(5.58,-0.25,-15.)); +#761 = LINE('',#762,#763); +#762 = CARTESIAN_POINT('',(5.58,-0.25,1.110223024625E-016)); +#763 = VECTOR('',#764,1.); +#764 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#765 = ORIENTED_EDGE('',*,*,#766,.F.); +#766 = EDGE_CURVE('',#767,#759,#769,.T.); +#767 = VERTEX_POINT('',#768); +#768 = CARTESIAN_POINT('',(5.08,-0.25,-16.)); +#769 = LINE('',#770,#771); +#770 = CARTESIAN_POINT('',(5.08,-0.25,-16.)); +#771 = VECTOR('',#772,1.); +#772 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#773 = ORIENTED_EDGE('',*,*,#774,.F.); +#774 = EDGE_CURVE('',#775,#767,#777,.T.); +#775 = VERTEX_POINT('',#776); +#776 = CARTESIAN_POINT('',(4.58,-0.25,-15.)); +#777 = LINE('',#778,#779); +#778 = CARTESIAN_POINT('',(4.58,-0.25,-15.)); +#779 = VECTOR('',#780,1.); +#780 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#781 = ORIENTED_EDGE('',*,*,#782,.F.); +#782 = EDGE_CURVE('',#783,#775,#785,.T.); +#783 = VERTEX_POINT('',#784); +#784 = CARTESIAN_POINT('',(4.58,-0.25,1.659097328934E-016)); +#785 = LINE('',#786,#787); +#786 = CARTESIAN_POINT('',(4.58,-0.25,1.659097328934E-016)); +#787 = VECTOR('',#788,1.); +#788 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#789 = ORIENTED_EDGE('',*,*,#790,.F.); +#790 = EDGE_CURVE('',#719,#783,#791,.T.); +#791 = LINE('',#792,#793); +#792 = CARTESIAN_POINT('',(4.08,-0.25,1.659097328934E-016)); +#793 = VECTOR('',#794,1.); +#794 = DIRECTION('',(1.,0.E+000,0.E+000)); +#795 = PLANE('',#796); +#796 = AXIS2_PLACEMENT_3D('',#797,#798,#799); +#797 = CARTESIAN_POINT('',(4.08,-0.25,2.)); +#798 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#799 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#800 = ADVANCED_FACE('',(#801),#812,.T.); +#801 = FACE_BOUND('',#802,.T.); +#802 = EDGE_LOOP('',(#803,#804,#805,#806)); +#803 = ORIENTED_EDGE('',*,*,#654,.F.); +#804 = ORIENTED_EDGE('',*,*,#163,.F.); +#805 = ORIENTED_EDGE('',*,*,#742,.T.); +#806 = ORIENTED_EDGE('',*,*,#807,.F.); +#807 = EDGE_CURVE('',#655,#743,#808,.T.); +#808 = LINE('',#809,#810); +#809 = CARTESIAN_POINT('',(6.08,0.25,-1.110223024625E-016)); +#810 = VECTOR('',#811,1.); +#811 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#812 = PLANE('',#813); +#813 = AXIS2_PLACEMENT_3D('',#814,#815,#816); +#814 = CARTESIAN_POINT('',(6.08,0.25,2.)); +#815 = DIRECTION('',(1.,0.E+000,0.E+000)); +#816 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#817 = ADVANCED_FACE('',(#818),#843,.F.); +#818 = FACE_BOUND('',#819,.F.); +#819 = EDGE_LOOP('',(#820,#828,#836,#842)); +#820 = ORIENTED_EDGE('',*,*,#821,.F.); +#821 = EDGE_CURVE('',#822,#188,#824,.T.); +#822 = VERTEX_POINT('',#823); +#823 = CARTESIAN_POINT('',(0.5,0.25,-15.)); +#824 = LINE('',#825,#826); +#825 = CARTESIAN_POINT('',(0.5,0.25,-15.)); +#826 = VECTOR('',#827,1.); +#827 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#828 = ORIENTED_EDGE('',*,*,#829,.T.); +#829 = EDGE_CURVE('',#822,#830,#832,.T.); +#830 = VERTEX_POINT('',#831); +#831 = CARTESIAN_POINT('',(0.5,-0.25,-15.)); +#832 = LINE('',#833,#834); +#833 = CARTESIAN_POINT('',(0.5,0.25,-15.)); +#834 = VECTOR('',#835,1.); +#835 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#836 = ORIENTED_EDGE('',*,*,#837,.T.); +#837 = EDGE_CURVE('',#830,#190,#838,.T.); +#838 = LINE('',#839,#840); +#839 = CARTESIAN_POINT('',(0.5,-0.25,-15.)); +#840 = VECTOR('',#841,1.); +#841 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#842 = ORIENTED_EDGE('',*,*,#187,.F.); +#843 = PLANE('',#844); +#844 = AXIS2_PLACEMENT_3D('',#845,#846,#847); +#845 = CARTESIAN_POINT('',(0.5,0.25,-15.)); +#846 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#847 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#848 = ADVANCED_FACE('',(#849),#891,.T.); +#849 = FACE_BOUND('',#850,.T.); +#850 = EDGE_LOOP('',(#851,#859,#860,#861,#869,#877,#885)); +#851 = ORIENTED_EDGE('',*,*,#852,.F.); +#852 = EDGE_CURVE('',#206,#853,#855,.T.); +#853 = VERTEX_POINT('',#854); +#854 = CARTESIAN_POINT('',(-2.04,0.25,-1.110223024625E-016)); +#855 = LINE('',#856,#857); +#856 = CARTESIAN_POINT('',(-2.04,0.25,2.)); +#857 = VECTOR('',#858,1.); +#858 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#859 = ORIENTED_EDGE('',*,*,#213,.F.); +#860 = ORIENTED_EDGE('',*,*,#821,.F.); +#861 = ORIENTED_EDGE('',*,*,#862,.F.); +#862 = EDGE_CURVE('',#863,#822,#865,.T.); +#863 = VERTEX_POINT('',#864); +#864 = CARTESIAN_POINT('',(0.E+000,0.25,-16.)); +#865 = LINE('',#866,#867); +#866 = CARTESIAN_POINT('',(0.E+000,0.25,-16.)); +#867 = VECTOR('',#868,1.); +#868 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#869 = ORIENTED_EDGE('',*,*,#870,.F.); +#870 = EDGE_CURVE('',#871,#863,#873,.T.); +#871 = VERTEX_POINT('',#872); +#872 = CARTESIAN_POINT('',(-0.5,0.25,-15.)); +#873 = LINE('',#874,#875); +#874 = CARTESIAN_POINT('',(-0.5,0.25,-15.)); +#875 = VECTOR('',#876,1.); +#876 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#877 = ORIENTED_EDGE('',*,*,#878,.F.); +#878 = EDGE_CURVE('',#879,#871,#881,.T.); +#879 = VERTEX_POINT('',#880); +#880 = CARTESIAN_POINT('',(-0.5,0.25,-1.110223024625E-016)); +#881 = LINE('',#882,#883); +#882 = CARTESIAN_POINT('',(-0.5,0.25,-1.110223024625E-016)); +#883 = VECTOR('',#884,1.); +#884 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#885 = ORIENTED_EDGE('',*,*,#886,.F.); +#886 = EDGE_CURVE('',#853,#879,#887,.T.); +#887 = LINE('',#888,#889); +#888 = CARTESIAN_POINT('',(-2.04,0.25,-1.110223024625E-016)); +#889 = VECTOR('',#890,1.); +#890 = DIRECTION('',(1.,0.E+000,0.E+000)); +#891 = PLANE('',#892); +#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895); +#893 = CARTESIAN_POINT('',(-2.04,0.25,2.)); +#894 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#895 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#896 = ADVANCED_FACE('',(#897),#915,.F.); +#897 = FACE_BOUND('',#898,.F.); +#898 = EDGE_LOOP('',(#899,#900,#901,#909)); +#899 = ORIENTED_EDGE('',*,*,#852,.F.); +#900 = ORIENTED_EDGE('',*,*,#205,.F.); +#901 = ORIENTED_EDGE('',*,*,#902,.T.); +#902 = EDGE_CURVE('',#198,#903,#905,.T.); +#903 = VERTEX_POINT('',#904); +#904 = CARTESIAN_POINT('',(-2.04,-0.25,1.110223024625E-016)); +#905 = LINE('',#906,#907); +#906 = CARTESIAN_POINT('',(-2.04,-0.25,2.)); +#907 = VECTOR('',#908,1.); +#908 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#909 = ORIENTED_EDGE('',*,*,#910,.F.); +#910 = EDGE_CURVE('',#853,#903,#911,.T.); +#911 = LINE('',#912,#913); +#912 = CARTESIAN_POINT('',(-2.04,0.25,-1.110223024625E-016)); +#913 = VECTOR('',#914,1.); +#914 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#915 = PLANE('',#916); +#916 = AXIS2_PLACEMENT_3D('',#917,#918,#919); +#917 = CARTESIAN_POINT('',(-2.04,0.25,2.)); +#918 = DIRECTION('',(1.,0.E+000,0.E+000)); +#919 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#920 = ADVANCED_FACE('',(#921),#956,.F.); +#921 = FACE_BOUND('',#922,.F.); +#922 = EDGE_LOOP('',(#923,#924,#925,#926,#934,#942,#950)); +#923 = ORIENTED_EDGE('',*,*,#902,.F.); +#924 = ORIENTED_EDGE('',*,*,#197,.F.); +#925 = ORIENTED_EDGE('',*,*,#837,.F.); +#926 = ORIENTED_EDGE('',*,*,#927,.F.); +#927 = EDGE_CURVE('',#928,#830,#930,.T.); +#928 = VERTEX_POINT('',#929); +#929 = CARTESIAN_POINT('',(0.E+000,-0.25,-16.)); +#930 = LINE('',#931,#932); +#931 = CARTESIAN_POINT('',(0.E+000,-0.25,-16.)); +#932 = VECTOR('',#933,1.); +#933 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#934 = ORIENTED_EDGE('',*,*,#935,.F.); +#935 = EDGE_CURVE('',#936,#928,#938,.T.); +#936 = VERTEX_POINT('',#937); +#937 = CARTESIAN_POINT('',(-0.5,-0.25,-15.)); +#938 = LINE('',#939,#940); +#939 = CARTESIAN_POINT('',(-0.5,-0.25,-15.)); +#940 = VECTOR('',#941,1.); +#941 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#942 = ORIENTED_EDGE('',*,*,#943,.F.); +#943 = EDGE_CURVE('',#944,#936,#946,.T.); +#944 = VERTEX_POINT('',#945); +#945 = CARTESIAN_POINT('',(-0.5,-0.25,1.110223024625E-016)); +#946 = LINE('',#947,#948); +#947 = CARTESIAN_POINT('',(-0.5,-0.25,1.110223024625E-016)); +#948 = VECTOR('',#949,1.); +#949 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#950 = ORIENTED_EDGE('',*,*,#951,.F.); +#951 = EDGE_CURVE('',#903,#944,#952,.T.); +#952 = LINE('',#953,#954); +#953 = CARTESIAN_POINT('',(-2.04,-0.25,1.110223024625E-016)); +#954 = VECTOR('',#955,1.); +#955 = DIRECTION('',(1.,0.E+000,0.E+000)); +#956 = PLANE('',#957); +#957 = AXIS2_PLACEMENT_3D('',#958,#959,#960); +#958 = CARTESIAN_POINT('',(-2.04,-0.25,2.)); +#959 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#960 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#961 = ADVANCED_FACE('',(#962),#987,.T.); +#962 = FACE_BOUND('',#963,.T.); +#963 = EDGE_LOOP('',(#964,#972,#973,#981)); +#964 = ORIENTED_EDGE('',*,*,#965,.F.); +#965 = EDGE_CURVE('',#224,#966,#968,.T.); +#966 = VERTEX_POINT('',#967); +#967 = CARTESIAN_POINT('',(17.28,0.25,-1.110223024625E-016)); +#968 = LINE('',#969,#970); +#969 = CARTESIAN_POINT('',(17.28,0.25,2.)); +#970 = VECTOR('',#971,1.); +#971 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#972 = ORIENTED_EDGE('',*,*,#221,.F.); +#973 = ORIENTED_EDGE('',*,*,#974,.T.); +#974 = EDGE_CURVE('',#222,#975,#977,.T.); +#975 = VERTEX_POINT('',#976); +#976 = CARTESIAN_POINT('',(17.28,-0.25,1.110223024625E-016)); +#977 = LINE('',#978,#979); +#978 = CARTESIAN_POINT('',(17.28,-0.25,2.)); +#979 = VECTOR('',#980,1.); +#980 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#981 = ORIENTED_EDGE('',*,*,#982,.F.); +#982 = EDGE_CURVE('',#966,#975,#983,.T.); +#983 = LINE('',#984,#985); +#984 = CARTESIAN_POINT('',(17.28,0.25,-1.110223024625E-016)); +#985 = VECTOR('',#986,1.); +#986 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#987 = PLANE('',#988); +#988 = AXIS2_PLACEMENT_3D('',#989,#990,#991); +#989 = CARTESIAN_POINT('',(17.28,0.25,2.)); +#990 = DIRECTION('',(1.,0.E+000,0.E+000)); +#991 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#992 = ADVANCED_FACE('',(#993),#1035,.T.); +#993 = FACE_BOUND('',#994,.T.); +#994 = EDGE_LOOP('',(#995,#1003,#1004,#1005,#1013,#1021,#1029)); +#995 = ORIENTED_EDGE('',*,*,#996,.F.); +#996 = EDGE_CURVE('',#240,#997,#999,.T.); +#997 = VERTEX_POINT('',#998); +#998 = CARTESIAN_POINT('',(14.74,0.25,-15.)); +#999 = LINE('',#1000,#1001); +#1000 = CARTESIAN_POINT('',(14.74,0.25,2.)); +#1001 = VECTOR('',#1002,1.); +#1002 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1003 = ORIENTED_EDGE('',*,*,#247,.F.); +#1004 = ORIENTED_EDGE('',*,*,#965,.T.); +#1005 = ORIENTED_EDGE('',*,*,#1006,.T.); +#1006 = EDGE_CURVE('',#966,#1007,#1009,.T.); +#1007 = VERTEX_POINT('',#1008); +#1008 = CARTESIAN_POINT('',(15.74,0.25,-1.110223024625E-016)); +#1009 = LINE('',#1010,#1011); +#1010 = CARTESIAN_POINT('',(17.28,0.25,-1.110223024625E-016)); +#1011 = VECTOR('',#1012,1.); +#1012 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1013 = ORIENTED_EDGE('',*,*,#1014,.F.); +#1014 = EDGE_CURVE('',#1015,#1007,#1017,.T.); +#1015 = VERTEX_POINT('',#1016); +#1016 = CARTESIAN_POINT('',(15.74,0.25,-15.)); +#1017 = LINE('',#1018,#1019); +#1018 = CARTESIAN_POINT('',(15.74,0.25,-15.)); +#1019 = VECTOR('',#1020,1.); +#1020 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1021 = ORIENTED_EDGE('',*,*,#1022,.F.); +#1022 = EDGE_CURVE('',#1023,#1015,#1025,.T.); +#1023 = VERTEX_POINT('',#1024); +#1024 = CARTESIAN_POINT('',(15.24,0.25,-16.)); +#1025 = LINE('',#1026,#1027); +#1026 = CARTESIAN_POINT('',(15.24,0.25,-16.)); +#1027 = VECTOR('',#1028,1.); +#1028 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#1029 = ORIENTED_EDGE('',*,*,#1030,.F.); +#1030 = EDGE_CURVE('',#997,#1023,#1031,.T.); +#1031 = LINE('',#1032,#1033); +#1032 = CARTESIAN_POINT('',(14.74,0.25,-15.)); +#1033 = VECTOR('',#1034,1.); +#1034 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#1035 = PLANE('',#1036); +#1036 = AXIS2_PLACEMENT_3D('',#1037,#1038,#1039); +#1037 = CARTESIAN_POINT('',(14.74,0.25,2.)); +#1038 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#1039 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1040 = ADVANCED_FACE('',(#1041),#1059,.F.); +#1041 = FACE_BOUND('',#1042,.F.); +#1042 = EDGE_LOOP('',(#1043,#1044,#1045,#1053)); +#1043 = ORIENTED_EDGE('',*,*,#996,.F.); +#1044 = ORIENTED_EDGE('',*,*,#239,.F.); +#1045 = ORIENTED_EDGE('',*,*,#1046,.T.); +#1046 = EDGE_CURVE('',#232,#1047,#1049,.T.); +#1047 = VERTEX_POINT('',#1048); +#1048 = CARTESIAN_POINT('',(14.74,-0.25,-15.)); +#1049 = LINE('',#1050,#1051); +#1050 = CARTESIAN_POINT('',(14.74,-0.25,2.)); +#1051 = VECTOR('',#1052,1.); +#1052 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1053 = ORIENTED_EDGE('',*,*,#1054,.F.); +#1054 = EDGE_CURVE('',#997,#1047,#1055,.T.); +#1055 = LINE('',#1056,#1057); +#1056 = CARTESIAN_POINT('',(14.74,0.25,-15.)); +#1057 = VECTOR('',#1058,1.); +#1058 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1059 = PLANE('',#1060); +#1060 = AXIS2_PLACEMENT_3D('',#1061,#1062,#1063); +#1061 = CARTESIAN_POINT('',(14.74,0.25,2.)); +#1062 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1063 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1064 = ADVANCED_FACE('',(#1065),#1100,.F.); +#1065 = FACE_BOUND('',#1066,.F.); +#1066 = EDGE_LOOP('',(#1067,#1068,#1069,#1070,#1078,#1086,#1094)); +#1067 = ORIENTED_EDGE('',*,*,#1046,.F.); +#1068 = ORIENTED_EDGE('',*,*,#231,.F.); +#1069 = ORIENTED_EDGE('',*,*,#974,.T.); +#1070 = ORIENTED_EDGE('',*,*,#1071,.T.); +#1071 = EDGE_CURVE('',#975,#1072,#1074,.T.); +#1072 = VERTEX_POINT('',#1073); +#1073 = CARTESIAN_POINT('',(15.74,-0.25,1.110223024625E-016)); +#1074 = LINE('',#1075,#1076); +#1075 = CARTESIAN_POINT('',(17.28,-0.25,1.110223024625E-016)); +#1076 = VECTOR('',#1077,1.); +#1077 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1078 = ORIENTED_EDGE('',*,*,#1079,.F.); +#1079 = EDGE_CURVE('',#1080,#1072,#1082,.T.); +#1080 = VERTEX_POINT('',#1081); +#1081 = CARTESIAN_POINT('',(15.74,-0.25,-15.)); +#1082 = LINE('',#1083,#1084); +#1083 = CARTESIAN_POINT('',(15.74,-0.25,-15.)); +#1084 = VECTOR('',#1085,1.); +#1085 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1086 = ORIENTED_EDGE('',*,*,#1087,.F.); +#1087 = EDGE_CURVE('',#1088,#1080,#1090,.T.); +#1088 = VERTEX_POINT('',#1089); +#1089 = CARTESIAN_POINT('',(15.24,-0.25,-16.)); +#1090 = LINE('',#1091,#1092); +#1091 = CARTESIAN_POINT('',(15.24,-0.25,-16.)); +#1092 = VECTOR('',#1093,1.); +#1093 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#1094 = ORIENTED_EDGE('',*,*,#1095,.F.); +#1095 = EDGE_CURVE('',#1047,#1088,#1096,.T.); +#1096 = LINE('',#1097,#1098); +#1097 = CARTESIAN_POINT('',(14.74,-0.25,-15.)); +#1098 = VECTOR('',#1099,1.); +#1099 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#1100 = PLANE('',#1101); +#1101 = AXIS2_PLACEMENT_3D('',#1102,#1103,#1104); +#1102 = CARTESIAN_POINT('',(14.74,-0.25,2.)); +#1103 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#1104 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1105 = ADVANCED_FACE('',(#1106),#1117,.F.); +#1106 = FACE_BOUND('',#1107,.F.); +#1107 = EDGE_LOOP('',(#1108,#1109,#1110,#1116)); +#1108 = ORIENTED_EDGE('',*,*,#454,.T.); +#1109 = ORIENTED_EDGE('',*,*,#358,.T.); +#1110 = ORIENTED_EDGE('',*,*,#1111,.F.); +#1111 = EDGE_CURVE('',#272,#359,#1112,.T.); +#1112 = LINE('',#1113,#1114); +#1113 = CARTESIAN_POINT('',(-3.43,-2.3,17.2)); +#1114 = VECTOR('',#1115,1.); +#1115 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#1116 = ORIENTED_EDGE('',*,*,#271,.F.); +#1117 = PLANE('',#1118); +#1118 = AXIS2_PLACEMENT_3D('',#1119,#1120,#1121); +#1119 = CARTESIAN_POINT('',(-3.43,-2.3,2.9)); +#1120 = DIRECTION('',(1.,-9.710141424855E-017,-2.536326566618E-017)); +#1121 = DIRECTION('',(2.536326566618E-017,-2.22044604925E-016,1.)); +#1122 = ADVANCED_FACE('',(#1123),#1134,.F.); +#1123 = FACE_BOUND('',#1124,.F.); +#1124 = EDGE_LOOP('',(#1125,#1126,#1127,#1133)); +#1125 = ORIENTED_EDGE('',*,*,#1111,.T.); +#1126 = ORIENTED_EDGE('',*,*,#366,.T.); +#1127 = ORIENTED_EDGE('',*,*,#1128,.F.); +#1128 = EDGE_CURVE('',#280,#367,#1129,.T.); +#1129 = LINE('',#1130,#1131); +#1130 = CARTESIAN_POINT('',(-0.23,-2.3,20.4)); +#1131 = VECTOR('',#1132,1.); +#1132 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#1133 = ORIENTED_EDGE('',*,*,#279,.F.); +#1134 = PLANE('',#1135); +#1135 = AXIS2_PLACEMENT_3D('',#1136,#1137,#1138); +#1136 = CARTESIAN_POINT('',(-3.43,-2.3,17.2)); +#1137 = DIRECTION('',(0.707106781187,8.834817739042E-017,-0.707106781187 + )); +#1138 = DIRECTION('',(0.707106781187,-2.256703143463E-016,0.707106781187 + )); +#1139 = ADVANCED_FACE('',(#1140),#1146,.F.); +#1140 = FACE_BOUND('',#1141,.F.); +#1141 = EDGE_LOOP('',(#1142,#1143,#1144,#1145)); +#1142 = ORIENTED_EDGE('',*,*,#1128,.T.); +#1143 = ORIENTED_EDGE('',*,*,#374,.T.); +#1144 = ORIENTED_EDGE('',*,*,#435,.F.); +#1145 = ORIENTED_EDGE('',*,*,#287,.F.); +#1146 = PLANE('',#1147); +#1147 = AXIS2_PLACEMENT_3D('',#1148,#1149,#1150); +#1148 = CARTESIAN_POINT('',(-0.23,-2.3,20.4)); +#1149 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#1150 = DIRECTION('',(1.,-9.710141424855E-017,-2.536326566618E-017)); +#1151 = ADVANCED_FACE('',(#1152),#1168,.F.); +#1152 = FACE_BOUND('',#1153,.T.); +#1153 = EDGE_LOOP('',(#1154,#1160,#1161,#1167)); +#1154 = ORIENTED_EDGE('',*,*,#1155,.T.); +#1155 = EDGE_CURVE('',#307,#394,#1156,.T.); +#1156 = LINE('',#1157,#1158); +#1157 = CARTESIAN_POINT('',(5.72,-2.3,12.8)); +#1158 = VECTOR('',#1159,1.); +#1159 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#1160 = ORIENTED_EDGE('',*,*,#393,.T.); +#1161 = ORIENTED_EDGE('',*,*,#1162,.F.); +#1162 = EDGE_CURVE('',#309,#396,#1163,.T.); +#1163 = LINE('',#1164,#1165); +#1164 = CARTESIAN_POINT('',(9.52,-2.3,12.8)); +#1165 = VECTOR('',#1166,1.); +#1166 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#1167 = ORIENTED_EDGE('',*,*,#306,.F.); +#1168 = CYLINDRICAL_SURFACE('',#1169,1.9); +#1169 = AXIS2_PLACEMENT_3D('',#1170,#1171,#1172); +#1170 = CARTESIAN_POINT('',(7.62,-2.3,12.8)); +#1171 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#1172 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#1173 = ADVANCED_FACE('',(#1174),#1185,.T.); +#1174 = FACE_BOUND('',#1175,.T.); +#1175 = EDGE_LOOP('',(#1176,#1177,#1178,#1184)); +#1176 = ORIENTED_EDGE('',*,*,#1162,.T.); +#1177 = ORIENTED_EDGE('',*,*,#404,.T.); +#1178 = ORIENTED_EDGE('',*,*,#1179,.F.); +#1179 = EDGE_CURVE('',#318,#405,#1180,.T.); +#1180 = LINE('',#1181,#1182); +#1181 = CARTESIAN_POINT('',(9.52,-2.3,10.95)); +#1182 = VECTOR('',#1183,1.); +#1183 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#1184 = ORIENTED_EDGE('',*,*,#317,.F.); +#1185 = PLANE('',#1186); +#1186 = AXIS2_PLACEMENT_3D('',#1187,#1188,#1189); +#1187 = CARTESIAN_POINT('',(9.52,-2.3,12.8)); +#1188 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#1189 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#1190 = ADVANCED_FACE('',(#1191),#1202,.F.); +#1191 = FACE_BOUND('',#1192,.T.); +#1192 = EDGE_LOOP('',(#1193,#1194,#1195,#1201)); +#1193 = ORIENTED_EDGE('',*,*,#1179,.T.); +#1194 = ORIENTED_EDGE('',*,*,#412,.T.); +#1195 = ORIENTED_EDGE('',*,*,#1196,.F.); +#1196 = EDGE_CURVE('',#326,#413,#1197,.T.); +#1197 = LINE('',#1198,#1199); +#1198 = CARTESIAN_POINT('',(5.72,-2.3,10.950000000001)); +#1199 = VECTOR('',#1200,1.); +#1200 = DIRECTION('',(9.710141424855E-017,1.,2.22044604925E-016)); +#1201 = ORIENTED_EDGE('',*,*,#325,.F.); +#1202 = CYLINDRICAL_SURFACE('',#1203,1.9); +#1203 = AXIS2_PLACEMENT_3D('',#1204,#1205,#1206); +#1204 = CARTESIAN_POINT('',(7.62,-2.3,10.95)); +#1205 = DIRECTION('',(-9.710141424855E-017,-1.,-2.22044604925E-016)); +#1206 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#1207 = ADVANCED_FACE('',(#1208),#1214,.F.); +#1208 = FACE_BOUND('',#1209,.F.); +#1209 = EDGE_LOOP('',(#1210,#1211,#1212,#1213)); +#1210 = ORIENTED_EDGE('',*,*,#1155,.T.); +#1211 = ORIENTED_EDGE('',*,*,#421,.T.); +#1212 = ORIENTED_EDGE('',*,*,#1196,.F.); +#1213 = ORIENTED_EDGE('',*,*,#334,.F.); +#1214 = PLANE('',#1215); +#1215 = AXIS2_PLACEMENT_3D('',#1216,#1217,#1218); +#1216 = CARTESIAN_POINT('',(5.72,-2.3,12.8)); +#1217 = DIRECTION('',(-1.,9.710141424855E-017,2.536326566618E-017)); +#1218 = DIRECTION('',(-2.536326566618E-017,2.22044604925E-016,-1.)); +#1219 = ADVANCED_FACE('',(#1220),#1231,.T.); +#1220 = FACE_BOUND('',#1221,.T.); +#1221 = EDGE_LOOP('',(#1222,#1223,#1224,#1230)); +#1222 = ORIENTED_EDGE('',*,*,#486,.T.); +#1223 = ORIENTED_EDGE('',*,*,#591,.T.); +#1224 = ORIENTED_EDGE('',*,*,#1225,.F.); +#1225 = EDGE_CURVE('',#511,#592,#1226,.T.); +#1226 = LINE('',#1227,#1228); +#1227 = CARTESIAN_POINT('',(10.66,0.25,-5.6881E-002)); +#1228 = VECTOR('',#1229,1.); +#1229 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1230 = ORIENTED_EDGE('',*,*,#510,.F.); +#1231 = PLANE('',#1232); +#1232 = AXIS2_PLACEMENT_3D('',#1233,#1234,#1235); +#1233 = CARTESIAN_POINT('',(11.16,0.25,-5.6881E-002)); +#1234 = DIRECTION('',(0.E+000,-4.440892098501E-016,-1.)); +#1235 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1236 = ADVANCED_FACE('',(#1237),#1248,.F.); +#1237 = FACE_BOUND('',#1238,.F.); +#1238 = EDGE_LOOP('',(#1239,#1240,#1241,#1247)); +#1239 = ORIENTED_EDGE('',*,*,#574,.T.); +#1240 = ORIENTED_EDGE('',*,*,#631,.T.); +#1241 = ORIENTED_EDGE('',*,*,#1242,.F.); +#1242 = EDGE_CURVE('',#543,#624,#1243,.T.); +#1243 = LINE('',#1244,#1245); +#1244 = CARTESIAN_POINT('',(9.66,0.25,-5.6881E-002)); +#1245 = VECTOR('',#1246,1.); +#1246 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1247 = ORIENTED_EDGE('',*,*,#550,.F.); +#1248 = PLANE('',#1249); +#1249 = AXIS2_PLACEMENT_3D('',#1250,#1251,#1252); +#1250 = CARTESIAN_POINT('',(9.16,0.25,-5.6881E-002)); +#1251 = DIRECTION('',(0.E+000,4.440892098501E-016,1.)); +#1252 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1253 = ADVANCED_FACE('',(#1254),#1265,.F.); +#1254 = FACE_BOUND('',#1255,.F.); +#1255 = EDGE_LOOP('',(#1256,#1257,#1258,#1264)); +#1256 = ORIENTED_EDGE('',*,*,#1242,.T.); +#1257 = ORIENTED_EDGE('',*,*,#623,.T.); +#1258 = ORIENTED_EDGE('',*,*,#1259,.F.); +#1259 = EDGE_CURVE('',#535,#616,#1260,.T.); +#1260 = LINE('',#1261,#1262); +#1261 = CARTESIAN_POINT('',(9.66,0.25,-15.)); +#1262 = VECTOR('',#1263,1.); +#1263 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1264 = ORIENTED_EDGE('',*,*,#542,.F.); +#1265 = PLANE('',#1266); +#1266 = AXIS2_PLACEMENT_3D('',#1267,#1268,#1269); +#1267 = CARTESIAN_POINT('',(9.66,0.25,-5.6881E-002)); +#1268 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1269 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1270 = ADVANCED_FACE('',(#1271),#1282,.F.); +#1271 = FACE_BOUND('',#1272,.F.); +#1272 = EDGE_LOOP('',(#1273,#1274,#1275,#1281)); +#1273 = ORIENTED_EDGE('',*,*,#1259,.T.); +#1274 = ORIENTED_EDGE('',*,*,#615,.T.); +#1275 = ORIENTED_EDGE('',*,*,#1276,.F.); +#1276 = EDGE_CURVE('',#527,#608,#1277,.T.); +#1277 = LINE('',#1278,#1279); +#1278 = CARTESIAN_POINT('',(10.16,0.25,-16.)); +#1279 = VECTOR('',#1280,1.); +#1280 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1281 = ORIENTED_EDGE('',*,*,#534,.F.); +#1282 = PLANE('',#1283); +#1283 = AXIS2_PLACEMENT_3D('',#1284,#1285,#1286); +#1284 = CARTESIAN_POINT('',(9.66,0.25,-15.)); +#1285 = DIRECTION('',(0.894427191,1.986027322598E-016,0.4472135955)); +#1286 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#1287 = ADVANCED_FACE('',(#1288),#1299,.F.); +#1288 = FACE_BOUND('',#1289,.F.); +#1289 = EDGE_LOOP('',(#1290,#1291,#1292,#1298)); +#1290 = ORIENTED_EDGE('',*,*,#1276,.T.); +#1291 = ORIENTED_EDGE('',*,*,#607,.T.); +#1292 = ORIENTED_EDGE('',*,*,#1293,.F.); +#1293 = EDGE_CURVE('',#519,#600,#1294,.T.); +#1294 = LINE('',#1295,#1296); +#1295 = CARTESIAN_POINT('',(10.66,0.25,-15.)); +#1296 = VECTOR('',#1297,1.); +#1297 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1298 = ORIENTED_EDGE('',*,*,#526,.F.); +#1299 = PLANE('',#1300); +#1300 = AXIS2_PLACEMENT_3D('',#1301,#1302,#1303); +#1301 = CARTESIAN_POINT('',(10.16,0.25,-16.)); +#1302 = DIRECTION('',(-0.894427191,1.986027322598E-016,0.4472135955)); +#1303 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#1304 = ADVANCED_FACE('',(#1305),#1311,.T.); +#1305 = FACE_BOUND('',#1306,.T.); +#1306 = EDGE_LOOP('',(#1307,#1308,#1309,#1310)); +#1307 = ORIENTED_EDGE('',*,*,#1225,.T.); +#1308 = ORIENTED_EDGE('',*,*,#599,.T.); +#1309 = ORIENTED_EDGE('',*,*,#1293,.F.); +#1310 = ORIENTED_EDGE('',*,*,#518,.F.); +#1311 = PLANE('',#1312); +#1312 = AXIS2_PLACEMENT_3D('',#1313,#1314,#1315); +#1313 = CARTESIAN_POINT('',(10.66,0.25,-5.6881E-002)); +#1314 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1315 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1316 = ADVANCED_FACE('',(#1317),#1328,.F.); +#1317 = FACE_BOUND('',#1318,.F.); +#1318 = EDGE_LOOP('',(#1319,#1320,#1321,#1327)); +#1319 = ORIENTED_EDGE('',*,*,#726,.T.); +#1320 = ORIENTED_EDGE('',*,*,#790,.T.); +#1321 = ORIENTED_EDGE('',*,*,#1322,.F.); +#1322 = EDGE_CURVE('',#695,#783,#1323,.T.); +#1323 = LINE('',#1324,#1325); +#1324 = CARTESIAN_POINT('',(4.58,0.25,-5.613487203161E-017)); +#1325 = VECTOR('',#1326,1.); +#1326 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1327 = ORIENTED_EDGE('',*,*,#702,.F.); +#1328 = PLANE('',#1329); +#1329 = AXIS2_PLACEMENT_3D('',#1330,#1331,#1332); +#1330 = CARTESIAN_POINT('',(4.08,0.25,-5.613487203161E-017)); +#1331 = DIRECTION('',(0.E+000,4.440892098501E-016,1.)); +#1332 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1333 = ADVANCED_FACE('',(#1334),#1345,.F.); +#1334 = FACE_BOUND('',#1335,.F.); +#1335 = EDGE_LOOP('',(#1336,#1337,#1338,#1344)); +#1336 = ORIENTED_EDGE('',*,*,#1322,.T.); +#1337 = ORIENTED_EDGE('',*,*,#782,.T.); +#1338 = ORIENTED_EDGE('',*,*,#1339,.F.); +#1339 = EDGE_CURVE('',#687,#775,#1340,.T.); +#1340 = LINE('',#1341,#1342); +#1341 = CARTESIAN_POINT('',(4.58,0.25,-15.)); +#1342 = VECTOR('',#1343,1.); +#1343 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1344 = ORIENTED_EDGE('',*,*,#694,.F.); +#1345 = PLANE('',#1346); +#1346 = AXIS2_PLACEMENT_3D('',#1347,#1348,#1349); +#1347 = CARTESIAN_POINT('',(4.58,0.25,-5.613487203161E-017)); +#1348 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1349 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1350 = ADVANCED_FACE('',(#1351),#1362,.F.); +#1351 = FACE_BOUND('',#1352,.F.); +#1352 = EDGE_LOOP('',(#1353,#1354,#1355,#1361)); +#1353 = ORIENTED_EDGE('',*,*,#1339,.T.); +#1354 = ORIENTED_EDGE('',*,*,#774,.T.); +#1355 = ORIENTED_EDGE('',*,*,#1356,.F.); +#1356 = EDGE_CURVE('',#679,#767,#1357,.T.); +#1357 = LINE('',#1358,#1359); +#1358 = CARTESIAN_POINT('',(5.08,0.25,-16.)); +#1359 = VECTOR('',#1360,1.); +#1360 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1361 = ORIENTED_EDGE('',*,*,#686,.F.); +#1362 = PLANE('',#1363); +#1363 = AXIS2_PLACEMENT_3D('',#1364,#1365,#1366); +#1364 = CARTESIAN_POINT('',(4.58,0.25,-15.)); +#1365 = DIRECTION('',(0.894427191,1.986027322598E-016,0.4472135955)); +#1366 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#1367 = ADVANCED_FACE('',(#1368),#1379,.F.); +#1368 = FACE_BOUND('',#1369,.F.); +#1369 = EDGE_LOOP('',(#1370,#1371,#1372,#1378)); +#1370 = ORIENTED_EDGE('',*,*,#1356,.T.); +#1371 = ORIENTED_EDGE('',*,*,#766,.T.); +#1372 = ORIENTED_EDGE('',*,*,#1373,.F.); +#1373 = EDGE_CURVE('',#671,#759,#1374,.T.); +#1374 = LINE('',#1375,#1376); +#1375 = CARTESIAN_POINT('',(5.58,0.25,-15.)); +#1376 = VECTOR('',#1377,1.); +#1377 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1378 = ORIENTED_EDGE('',*,*,#678,.F.); +#1379 = PLANE('',#1380); +#1380 = AXIS2_PLACEMENT_3D('',#1381,#1382,#1383); +#1381 = CARTESIAN_POINT('',(5.08,0.25,-16.)); +#1382 = DIRECTION('',(-0.894427191,1.986027322598E-016,0.4472135955)); +#1383 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#1384 = ADVANCED_FACE('',(#1385),#1396,.T.); +#1385 = FACE_BOUND('',#1386,.T.); +#1386 = EDGE_LOOP('',(#1387,#1393,#1394,#1395)); +#1387 = ORIENTED_EDGE('',*,*,#1388,.T.); +#1388 = EDGE_CURVE('',#663,#751,#1389,.T.); +#1389 = LINE('',#1390,#1391); +#1390 = CARTESIAN_POINT('',(5.58,0.25,-1.110223024625E-016)); +#1391 = VECTOR('',#1392,1.); +#1392 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1393 = ORIENTED_EDGE('',*,*,#758,.T.); +#1394 = ORIENTED_EDGE('',*,*,#1373,.F.); +#1395 = ORIENTED_EDGE('',*,*,#670,.F.); +#1396 = PLANE('',#1397); +#1397 = AXIS2_PLACEMENT_3D('',#1398,#1399,#1400); +#1398 = CARTESIAN_POINT('',(5.58,0.25,-1.110223024625E-016)); +#1399 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1400 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1401 = ADVANCED_FACE('',(#1402),#1408,.T.); +#1402 = FACE_BOUND('',#1403,.T.); +#1403 = EDGE_LOOP('',(#1404,#1405,#1406,#1407)); +#1404 = ORIENTED_EDGE('',*,*,#807,.T.); +#1405 = ORIENTED_EDGE('',*,*,#750,.T.); +#1406 = ORIENTED_EDGE('',*,*,#1388,.F.); +#1407 = ORIENTED_EDGE('',*,*,#662,.F.); +#1408 = PLANE('',#1409); +#1409 = AXIS2_PLACEMENT_3D('',#1410,#1411,#1412); +#1410 = CARTESIAN_POINT('',(6.08,0.25,-1.110223024625E-016)); +#1411 = DIRECTION('',(0.E+000,-4.440892098501E-016,-1.)); +#1412 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1413 = ADVANCED_FACE('',(#1414),#1425,.F.); +#1414 = FACE_BOUND('',#1415,.F.); +#1415 = EDGE_LOOP('',(#1416,#1422,#1423,#1424)); +#1416 = ORIENTED_EDGE('',*,*,#1417,.T.); +#1417 = EDGE_CURVE('',#863,#928,#1418,.T.); +#1418 = LINE('',#1419,#1420); +#1419 = CARTESIAN_POINT('',(0.E+000,0.25,-16.)); +#1420 = VECTOR('',#1421,1.); +#1421 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1422 = ORIENTED_EDGE('',*,*,#927,.T.); +#1423 = ORIENTED_EDGE('',*,*,#829,.F.); +#1424 = ORIENTED_EDGE('',*,*,#862,.F.); +#1425 = PLANE('',#1426); +#1426 = AXIS2_PLACEMENT_3D('',#1427,#1428,#1429); +#1427 = CARTESIAN_POINT('',(0.E+000,0.25,-16.)); +#1428 = DIRECTION('',(-0.894427191,1.986027322598E-016,0.4472135955)); +#1429 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#1430 = ADVANCED_FACE('',(#1431),#1442,.F.); +#1431 = FACE_BOUND('',#1432,.F.); +#1432 = EDGE_LOOP('',(#1433,#1434,#1435,#1441)); +#1433 = ORIENTED_EDGE('',*,*,#910,.T.); +#1434 = ORIENTED_EDGE('',*,*,#951,.T.); +#1435 = ORIENTED_EDGE('',*,*,#1436,.F.); +#1436 = EDGE_CURVE('',#879,#944,#1437,.T.); +#1437 = LINE('',#1438,#1439); +#1438 = CARTESIAN_POINT('',(-0.5,0.25,-1.110223024625E-016)); +#1439 = VECTOR('',#1440,1.); +#1440 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1441 = ORIENTED_EDGE('',*,*,#886,.F.); +#1442 = PLANE('',#1443); +#1443 = AXIS2_PLACEMENT_3D('',#1444,#1445,#1446); +#1444 = CARTESIAN_POINT('',(-2.04,0.25,-1.110223024625E-016)); +#1445 = DIRECTION('',(0.E+000,4.440892098501E-016,1.)); +#1446 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1447 = ADVANCED_FACE('',(#1448),#1459,.F.); +#1448 = FACE_BOUND('',#1449,.F.); +#1449 = EDGE_LOOP('',(#1450,#1451,#1452,#1458)); +#1450 = ORIENTED_EDGE('',*,*,#1436,.T.); +#1451 = ORIENTED_EDGE('',*,*,#943,.T.); +#1452 = ORIENTED_EDGE('',*,*,#1453,.F.); +#1453 = EDGE_CURVE('',#871,#936,#1454,.T.); +#1454 = LINE('',#1455,#1456); +#1455 = CARTESIAN_POINT('',(-0.5,0.25,-15.)); +#1456 = VECTOR('',#1457,1.); +#1457 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1458 = ORIENTED_EDGE('',*,*,#878,.F.); +#1459 = PLANE('',#1460); +#1460 = AXIS2_PLACEMENT_3D('',#1461,#1462,#1463); +#1461 = CARTESIAN_POINT('',(-0.5,0.25,-1.110223024625E-016)); +#1462 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1463 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1464 = ADVANCED_FACE('',(#1465),#1471,.F.); +#1465 = FACE_BOUND('',#1466,.F.); +#1466 = EDGE_LOOP('',(#1467,#1468,#1469,#1470)); +#1467 = ORIENTED_EDGE('',*,*,#1453,.T.); +#1468 = ORIENTED_EDGE('',*,*,#935,.T.); +#1469 = ORIENTED_EDGE('',*,*,#1417,.F.); +#1470 = ORIENTED_EDGE('',*,*,#870,.F.); +#1471 = PLANE('',#1472); +#1472 = AXIS2_PLACEMENT_3D('',#1473,#1474,#1475); +#1473 = CARTESIAN_POINT('',(-0.5,0.25,-15.)); +#1474 = DIRECTION('',(0.894427191,1.986027322598E-016,0.4472135955)); +#1475 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#1476 = ADVANCED_FACE('',(#1477),#1488,.T.); +#1477 = FACE_BOUND('',#1478,.T.); +#1478 = EDGE_LOOP('',(#1479,#1480,#1481,#1487)); +#1479 = ORIENTED_EDGE('',*,*,#982,.T.); +#1480 = ORIENTED_EDGE('',*,*,#1071,.T.); +#1481 = ORIENTED_EDGE('',*,*,#1482,.F.); +#1482 = EDGE_CURVE('',#1007,#1072,#1483,.T.); +#1483 = LINE('',#1484,#1485); +#1484 = CARTESIAN_POINT('',(15.74,0.25,-1.110223024625E-016)); +#1485 = VECTOR('',#1486,1.); +#1486 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1487 = ORIENTED_EDGE('',*,*,#1006,.F.); +#1488 = PLANE('',#1489); +#1489 = AXIS2_PLACEMENT_3D('',#1490,#1491,#1492); +#1490 = CARTESIAN_POINT('',(17.28,0.25,-1.110223024625E-016)); +#1491 = DIRECTION('',(0.E+000,-4.440892098501E-016,-1.)); +#1492 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1493 = ADVANCED_FACE('',(#1494),#1505,.F.); +#1494 = FACE_BOUND('',#1495,.F.); +#1495 = EDGE_LOOP('',(#1496,#1497,#1498,#1504)); +#1496 = ORIENTED_EDGE('',*,*,#1054,.T.); +#1497 = ORIENTED_EDGE('',*,*,#1095,.T.); +#1498 = ORIENTED_EDGE('',*,*,#1499,.F.); +#1499 = EDGE_CURVE('',#1023,#1088,#1500,.T.); +#1500 = LINE('',#1501,#1502); +#1501 = CARTESIAN_POINT('',(15.24,0.25,-16.)); +#1502 = VECTOR('',#1503,1.); +#1503 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1504 = ORIENTED_EDGE('',*,*,#1030,.F.); +#1505 = PLANE('',#1506); +#1506 = AXIS2_PLACEMENT_3D('',#1507,#1508,#1509); +#1507 = CARTESIAN_POINT('',(14.74,0.25,-15.)); +#1508 = DIRECTION('',(0.894427191,1.986027322598E-016,0.4472135955)); +#1509 = DIRECTION('',(0.4472135955,-5.958081967793E-016,-0.894427191)); +#1510 = ADVANCED_FACE('',(#1511),#1522,.F.); +#1511 = FACE_BOUND('',#1512,.F.); +#1512 = EDGE_LOOP('',(#1513,#1514,#1515,#1521)); +#1513 = ORIENTED_EDGE('',*,*,#1499,.T.); +#1514 = ORIENTED_EDGE('',*,*,#1087,.T.); +#1515 = ORIENTED_EDGE('',*,*,#1516,.F.); +#1516 = EDGE_CURVE('',#1015,#1080,#1517,.T.); +#1517 = LINE('',#1518,#1519); +#1518 = CARTESIAN_POINT('',(15.74,0.25,-15.)); +#1519 = VECTOR('',#1520,1.); +#1520 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1521 = ORIENTED_EDGE('',*,*,#1022,.F.); +#1522 = PLANE('',#1523); +#1523 = AXIS2_PLACEMENT_3D('',#1524,#1525,#1526); +#1524 = CARTESIAN_POINT('',(15.24,0.25,-16.)); +#1525 = DIRECTION('',(-0.894427191,1.986027322598E-016,0.4472135955)); +#1526 = DIRECTION('',(0.4472135955,5.958081967793E-016,0.894427191)); +#1527 = ADVANCED_FACE('',(#1528),#1534,.F.); +#1528 = FACE_BOUND('',#1529,.F.); +#1529 = EDGE_LOOP('',(#1530,#1531,#1532,#1533)); +#1530 = ORIENTED_EDGE('',*,*,#1516,.T.); +#1531 = ORIENTED_EDGE('',*,*,#1079,.T.); +#1532 = ORIENTED_EDGE('',*,*,#1482,.F.); +#1533 = ORIENTED_EDGE('',*,*,#1014,.F.); +#1534 = PLANE('',#1535); +#1535 = AXIS2_PLACEMENT_3D('',#1536,#1537,#1538); +#1536 = CARTESIAN_POINT('',(15.74,0.25,-15.)); +#1537 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1538 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1543)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1540,#1541,#1542)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1540 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1541 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1542 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1543 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#1540, + 'distance_accuracy_value','confusion accuracy'); +#1544 = PRODUCT_TYPE('part',$,(#7)); +#1545 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #1546,#1554,#1561,#1568,#1575,#1582,#1589,#1596,#1604,#1611,#1618, + #1625,#1632,#1639,#1646,#1653,#1660,#1667,#1674,#1681,#1688,#1695, + #1702,#1709,#1716,#1723,#1730,#1737,#1744,#1751,#1758,#1765,#1772, + #1779,#1786,#1793,#1800,#1807,#1814,#1821,#1828,#1835,#1842,#1849, + #1856,#1863,#1870,#1877,#1884,#1891),#1539); +#1546 = STYLED_ITEM('color',(#1547),#17); +#1547 = PRESENTATION_STYLE_ASSIGNMENT((#1548)); +#1548 = SURFACE_STYLE_USAGE(.BOTH.,#1549); +#1549 = SURFACE_SIDE_STYLE('',(#1550)); +#1550 = SURFACE_STYLE_FILL_AREA(#1551); +#1551 = FILL_AREA_STYLE('',(#1552)); +#1552 = FILL_AREA_STYLE_COLOUR('',#1553); +#1553 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#1554 = STYLED_ITEM('color',(#1555),#59); +#1555 = PRESENTATION_STYLE_ASSIGNMENT((#1556)); +#1556 = SURFACE_STYLE_USAGE(.BOTH.,#1557); +#1557 = SURFACE_SIDE_STYLE('',(#1558)); +#1558 = SURFACE_STYLE_FILL_AREA(#1559); +#1559 = FILL_AREA_STYLE('',(#1560)); +#1560 = FILL_AREA_STYLE_COLOUR('',#1553); +#1561 = STYLED_ITEM('color',(#1562),#90); +#1562 = PRESENTATION_STYLE_ASSIGNMENT((#1563)); +#1563 = SURFACE_STYLE_USAGE(.BOTH.,#1564); +#1564 = SURFACE_SIDE_STYLE('',(#1565)); +#1565 = SURFACE_STYLE_FILL_AREA(#1566); +#1566 = FILL_AREA_STYLE('',(#1567)); +#1567 = FILL_AREA_STYLE_COLOUR('',#1553); +#1568 = STYLED_ITEM('color',(#1569),#257); +#1569 = PRESENTATION_STYLE_ASSIGNMENT((#1570)); +#1570 = SURFACE_STYLE_USAGE(.BOTH.,#1571); +#1571 = SURFACE_SIDE_STYLE('',(#1572)); +#1572 = SURFACE_STYLE_FILL_AREA(#1573); +#1573 = FILL_AREA_STYLE('',(#1574)); +#1574 = FILL_AREA_STYLE_COLOUR('',#1553); +#1575 = STYLED_ITEM('color',(#1576),#344); +#1576 = PRESENTATION_STYLE_ASSIGNMENT((#1577)); +#1577 = SURFACE_STYLE_USAGE(.BOTH.,#1578); +#1578 = SURFACE_SIDE_STYLE('',(#1579)); +#1579 = SURFACE_STYLE_FILL_AREA(#1580); +#1580 = FILL_AREA_STYLE('',(#1581)); +#1581 = FILL_AREA_STYLE_COLOUR('',#1553); +#1582 = STYLED_ITEM('color',(#1583),#431); +#1583 = PRESENTATION_STYLE_ASSIGNMENT((#1584)); +#1584 = SURFACE_STYLE_USAGE(.BOTH.,#1585); +#1585 = SURFACE_SIDE_STYLE('',(#1586)); +#1586 = SURFACE_STYLE_FILL_AREA(#1587); +#1587 = FILL_AREA_STYLE('',(#1588)); +#1588 = FILL_AREA_STYLE_COLOUR('',#1553); +#1589 = STYLED_ITEM('color',(#1590),#448); +#1590 = PRESENTATION_STYLE_ASSIGNMENT((#1591)); +#1591 = SURFACE_STYLE_USAGE(.BOTH.,#1592); +#1592 = SURFACE_SIDE_STYLE('',(#1593)); +#1593 = SURFACE_STYLE_FILL_AREA(#1594); +#1594 = FILL_AREA_STYLE('',(#1595)); +#1595 = FILL_AREA_STYLE_COLOUR('',#1553); +#1596 = STYLED_ITEM('color',(#1597),#465); +#1597 = PRESENTATION_STYLE_ASSIGNMENT((#1598)); +#1598 = SURFACE_STYLE_USAGE(.BOTH.,#1599); +#1599 = SURFACE_SIDE_STYLE('',(#1600)); +#1600 = SURFACE_STYLE_FILL_AREA(#1601); +#1601 = FILL_AREA_STYLE('',(#1602)); +#1602 = FILL_AREA_STYLE_COLOUR('',#1603); +#1603 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#1604 = STYLED_ITEM('color',(#1605),#496); +#1605 = PRESENTATION_STYLE_ASSIGNMENT((#1606)); +#1606 = SURFACE_STYLE_USAGE(.BOTH.,#1607); +#1607 = SURFACE_SIDE_STYLE('',(#1608)); +#1608 = SURFACE_STYLE_FILL_AREA(#1609); +#1609 = FILL_AREA_STYLE('',(#1610)); +#1610 = FILL_AREA_STYLE_COLOUR('',#1603); +#1611 = STYLED_ITEM('color',(#1612),#560); +#1612 = PRESENTATION_STYLE_ASSIGNMENT((#1613)); +#1613 = SURFACE_STYLE_USAGE(.BOTH.,#1614); +#1614 = SURFACE_SIDE_STYLE('',(#1615)); +#1615 = SURFACE_STYLE_FILL_AREA(#1616); +#1616 = FILL_AREA_STYLE('',(#1617)); +#1617 = FILL_AREA_STYLE_COLOUR('',#1603); +#1618 = STYLED_ITEM('color',(#1619),#584); +#1619 = PRESENTATION_STYLE_ASSIGNMENT((#1620)); +#1620 = SURFACE_STYLE_USAGE(.BOTH.,#1621); +#1621 = SURFACE_SIDE_STYLE('',(#1622)); +#1622 = SURFACE_STYLE_FILL_AREA(#1623); +#1623 = FILL_AREA_STYLE('',(#1624)); +#1624 = FILL_AREA_STYLE_COLOUR('',#1603); +#1625 = STYLED_ITEM('color',(#1626),#641); +#1626 = PRESENTATION_STYLE_ASSIGNMENT((#1627)); +#1627 = SURFACE_STYLE_USAGE(.BOTH.,#1628); +#1628 = SURFACE_SIDE_STYLE('',(#1629)); +#1629 = SURFACE_STYLE_FILL_AREA(#1630); +#1630 = FILL_AREA_STYLE('',(#1631)); +#1631 = FILL_AREA_STYLE_COLOUR('',#1603); +#1632 = STYLED_ITEM('color',(#1633),#712); +#1633 = PRESENTATION_STYLE_ASSIGNMENT((#1634)); +#1634 = SURFACE_STYLE_USAGE(.BOTH.,#1635); +#1635 = SURFACE_SIDE_STYLE('',(#1636)); +#1636 = SURFACE_STYLE_FILL_AREA(#1637); +#1637 = FILL_AREA_STYLE('',(#1638)); +#1638 = FILL_AREA_STYLE_COLOUR('',#1603); +#1639 = STYLED_ITEM('color',(#1640),#736); +#1640 = PRESENTATION_STYLE_ASSIGNMENT((#1641)); +#1641 = SURFACE_STYLE_USAGE(.BOTH.,#1642); +#1642 = SURFACE_SIDE_STYLE('',(#1643)); +#1643 = SURFACE_STYLE_FILL_AREA(#1644); +#1644 = FILL_AREA_STYLE('',(#1645)); +#1645 = FILL_AREA_STYLE_COLOUR('',#1603); +#1646 = STYLED_ITEM('color',(#1647),#800); +#1647 = PRESENTATION_STYLE_ASSIGNMENT((#1648)); +#1648 = SURFACE_STYLE_USAGE(.BOTH.,#1649); +#1649 = SURFACE_SIDE_STYLE('',(#1650)); +#1650 = SURFACE_STYLE_FILL_AREA(#1651); +#1651 = FILL_AREA_STYLE('',(#1652)); +#1652 = FILL_AREA_STYLE_COLOUR('',#1603); +#1653 = STYLED_ITEM('color',(#1654),#817); +#1654 = PRESENTATION_STYLE_ASSIGNMENT((#1655)); +#1655 = SURFACE_STYLE_USAGE(.BOTH.,#1656); +#1656 = SURFACE_SIDE_STYLE('',(#1657)); +#1657 = SURFACE_STYLE_FILL_AREA(#1658); +#1658 = FILL_AREA_STYLE('',(#1659)); +#1659 = FILL_AREA_STYLE_COLOUR('',#1603); +#1660 = STYLED_ITEM('color',(#1661),#848); +#1661 = PRESENTATION_STYLE_ASSIGNMENT((#1662)); +#1662 = SURFACE_STYLE_USAGE(.BOTH.,#1663); +#1663 = SURFACE_SIDE_STYLE('',(#1664)); +#1664 = SURFACE_STYLE_FILL_AREA(#1665); +#1665 = FILL_AREA_STYLE('',(#1666)); +#1666 = FILL_AREA_STYLE_COLOUR('',#1603); +#1667 = STYLED_ITEM('color',(#1668),#896); +#1668 = PRESENTATION_STYLE_ASSIGNMENT((#1669)); +#1669 = SURFACE_STYLE_USAGE(.BOTH.,#1670); +#1670 = SURFACE_SIDE_STYLE('',(#1671)); +#1671 = SURFACE_STYLE_FILL_AREA(#1672); +#1672 = FILL_AREA_STYLE('',(#1673)); +#1673 = FILL_AREA_STYLE_COLOUR('',#1603); +#1674 = STYLED_ITEM('color',(#1675),#920); +#1675 = PRESENTATION_STYLE_ASSIGNMENT((#1676)); +#1676 = SURFACE_STYLE_USAGE(.BOTH.,#1677); +#1677 = SURFACE_SIDE_STYLE('',(#1678)); +#1678 = SURFACE_STYLE_FILL_AREA(#1679); +#1679 = FILL_AREA_STYLE('',(#1680)); +#1680 = FILL_AREA_STYLE_COLOUR('',#1603); +#1681 = STYLED_ITEM('color',(#1682),#961); +#1682 = PRESENTATION_STYLE_ASSIGNMENT((#1683)); +#1683 = SURFACE_STYLE_USAGE(.BOTH.,#1684); +#1684 = SURFACE_SIDE_STYLE('',(#1685)); +#1685 = SURFACE_STYLE_FILL_AREA(#1686); +#1686 = FILL_AREA_STYLE('',(#1687)); +#1687 = FILL_AREA_STYLE_COLOUR('',#1603); +#1688 = STYLED_ITEM('color',(#1689),#992); +#1689 = PRESENTATION_STYLE_ASSIGNMENT((#1690)); +#1690 = SURFACE_STYLE_USAGE(.BOTH.,#1691); +#1691 = SURFACE_SIDE_STYLE('',(#1692)); +#1692 = SURFACE_STYLE_FILL_AREA(#1693); +#1693 = FILL_AREA_STYLE('',(#1694)); +#1694 = FILL_AREA_STYLE_COLOUR('',#1603); +#1695 = STYLED_ITEM('color',(#1696),#1040); +#1696 = PRESENTATION_STYLE_ASSIGNMENT((#1697)); +#1697 = SURFACE_STYLE_USAGE(.BOTH.,#1698); +#1698 = SURFACE_SIDE_STYLE('',(#1699)); +#1699 = SURFACE_STYLE_FILL_AREA(#1700); +#1700 = FILL_AREA_STYLE('',(#1701)); +#1701 = FILL_AREA_STYLE_COLOUR('',#1603); +#1702 = STYLED_ITEM('color',(#1703),#1064); +#1703 = PRESENTATION_STYLE_ASSIGNMENT((#1704)); +#1704 = SURFACE_STYLE_USAGE(.BOTH.,#1705); +#1705 = SURFACE_SIDE_STYLE('',(#1706)); +#1706 = SURFACE_STYLE_FILL_AREA(#1707); +#1707 = FILL_AREA_STYLE('',(#1708)); +#1708 = FILL_AREA_STYLE_COLOUR('',#1603); +#1709 = STYLED_ITEM('color',(#1710),#1105); +#1710 = PRESENTATION_STYLE_ASSIGNMENT((#1711)); +#1711 = SURFACE_STYLE_USAGE(.BOTH.,#1712); +#1712 = SURFACE_SIDE_STYLE('',(#1713)); +#1713 = SURFACE_STYLE_FILL_AREA(#1714); +#1714 = FILL_AREA_STYLE('',(#1715)); +#1715 = FILL_AREA_STYLE_COLOUR('',#1553); +#1716 = STYLED_ITEM('color',(#1717),#1122); +#1717 = PRESENTATION_STYLE_ASSIGNMENT((#1718)); +#1718 = SURFACE_STYLE_USAGE(.BOTH.,#1719); +#1719 = SURFACE_SIDE_STYLE('',(#1720)); +#1720 = SURFACE_STYLE_FILL_AREA(#1721); +#1721 = FILL_AREA_STYLE('',(#1722)); +#1722 = FILL_AREA_STYLE_COLOUR('',#1553); +#1723 = STYLED_ITEM('color',(#1724),#1139); +#1724 = PRESENTATION_STYLE_ASSIGNMENT((#1725)); +#1725 = SURFACE_STYLE_USAGE(.BOTH.,#1726); +#1726 = SURFACE_SIDE_STYLE('',(#1727)); +#1727 = SURFACE_STYLE_FILL_AREA(#1728); +#1728 = FILL_AREA_STYLE('',(#1729)); +#1729 = FILL_AREA_STYLE_COLOUR('',#1553); +#1730 = STYLED_ITEM('color',(#1731),#1151); +#1731 = PRESENTATION_STYLE_ASSIGNMENT((#1732)); +#1732 = SURFACE_STYLE_USAGE(.BOTH.,#1733); +#1733 = SURFACE_SIDE_STYLE('',(#1734)); +#1734 = SURFACE_STYLE_FILL_AREA(#1735); +#1735 = FILL_AREA_STYLE('',(#1736)); +#1736 = FILL_AREA_STYLE_COLOUR('',#1553); +#1737 = STYLED_ITEM('color',(#1738),#1173); +#1738 = PRESENTATION_STYLE_ASSIGNMENT((#1739)); +#1739 = SURFACE_STYLE_USAGE(.BOTH.,#1740); +#1740 = SURFACE_SIDE_STYLE('',(#1741)); +#1741 = SURFACE_STYLE_FILL_AREA(#1742); +#1742 = FILL_AREA_STYLE('',(#1743)); +#1743 = FILL_AREA_STYLE_COLOUR('',#1553); +#1744 = STYLED_ITEM('color',(#1745),#1190); +#1745 = PRESENTATION_STYLE_ASSIGNMENT((#1746)); +#1746 = SURFACE_STYLE_USAGE(.BOTH.,#1747); +#1747 = SURFACE_SIDE_STYLE('',(#1748)); +#1748 = SURFACE_STYLE_FILL_AREA(#1749); +#1749 = FILL_AREA_STYLE('',(#1750)); +#1750 = FILL_AREA_STYLE_COLOUR('',#1553); +#1751 = STYLED_ITEM('color',(#1752),#1207); +#1752 = PRESENTATION_STYLE_ASSIGNMENT((#1753)); +#1753 = SURFACE_STYLE_USAGE(.BOTH.,#1754); +#1754 = SURFACE_SIDE_STYLE('',(#1755)); +#1755 = SURFACE_STYLE_FILL_AREA(#1756); +#1756 = FILL_AREA_STYLE('',(#1757)); +#1757 = FILL_AREA_STYLE_COLOUR('',#1553); +#1758 = STYLED_ITEM('color',(#1759),#1219); +#1759 = PRESENTATION_STYLE_ASSIGNMENT((#1760)); +#1760 = SURFACE_STYLE_USAGE(.BOTH.,#1761); +#1761 = SURFACE_SIDE_STYLE('',(#1762)); +#1762 = SURFACE_STYLE_FILL_AREA(#1763); +#1763 = FILL_AREA_STYLE('',(#1764)); +#1764 = FILL_AREA_STYLE_COLOUR('',#1603); +#1765 = STYLED_ITEM('color',(#1766),#1236); +#1766 = PRESENTATION_STYLE_ASSIGNMENT((#1767)); +#1767 = SURFACE_STYLE_USAGE(.BOTH.,#1768); +#1768 = SURFACE_SIDE_STYLE('',(#1769)); +#1769 = SURFACE_STYLE_FILL_AREA(#1770); +#1770 = FILL_AREA_STYLE('',(#1771)); +#1771 = FILL_AREA_STYLE_COLOUR('',#1603); +#1772 = STYLED_ITEM('color',(#1773),#1253); +#1773 = PRESENTATION_STYLE_ASSIGNMENT((#1774)); +#1774 = SURFACE_STYLE_USAGE(.BOTH.,#1775); +#1775 = SURFACE_SIDE_STYLE('',(#1776)); +#1776 = SURFACE_STYLE_FILL_AREA(#1777); +#1777 = FILL_AREA_STYLE('',(#1778)); +#1778 = FILL_AREA_STYLE_COLOUR('',#1603); +#1779 = STYLED_ITEM('color',(#1780),#1270); +#1780 = PRESENTATION_STYLE_ASSIGNMENT((#1781)); +#1781 = SURFACE_STYLE_USAGE(.BOTH.,#1782); +#1782 = SURFACE_SIDE_STYLE('',(#1783)); +#1783 = SURFACE_STYLE_FILL_AREA(#1784); +#1784 = FILL_AREA_STYLE('',(#1785)); +#1785 = FILL_AREA_STYLE_COLOUR('',#1603); +#1786 = STYLED_ITEM('color',(#1787),#1287); +#1787 = PRESENTATION_STYLE_ASSIGNMENT((#1788)); +#1788 = SURFACE_STYLE_USAGE(.BOTH.,#1789); +#1789 = SURFACE_SIDE_STYLE('',(#1790)); +#1790 = SURFACE_STYLE_FILL_AREA(#1791); +#1791 = FILL_AREA_STYLE('',(#1792)); +#1792 = FILL_AREA_STYLE_COLOUR('',#1603); +#1793 = STYLED_ITEM('color',(#1794),#1304); +#1794 = PRESENTATION_STYLE_ASSIGNMENT((#1795)); +#1795 = SURFACE_STYLE_USAGE(.BOTH.,#1796); +#1796 = SURFACE_SIDE_STYLE('',(#1797)); +#1797 = SURFACE_STYLE_FILL_AREA(#1798); +#1798 = FILL_AREA_STYLE('',(#1799)); +#1799 = FILL_AREA_STYLE_COLOUR('',#1603); +#1800 = STYLED_ITEM('color',(#1801),#1316); +#1801 = PRESENTATION_STYLE_ASSIGNMENT((#1802)); +#1802 = SURFACE_STYLE_USAGE(.BOTH.,#1803); +#1803 = SURFACE_SIDE_STYLE('',(#1804)); +#1804 = SURFACE_STYLE_FILL_AREA(#1805); +#1805 = FILL_AREA_STYLE('',(#1806)); +#1806 = FILL_AREA_STYLE_COLOUR('',#1603); +#1807 = STYLED_ITEM('color',(#1808),#1333); +#1808 = PRESENTATION_STYLE_ASSIGNMENT((#1809)); +#1809 = SURFACE_STYLE_USAGE(.BOTH.,#1810); +#1810 = SURFACE_SIDE_STYLE('',(#1811)); +#1811 = SURFACE_STYLE_FILL_AREA(#1812); +#1812 = FILL_AREA_STYLE('',(#1813)); +#1813 = FILL_AREA_STYLE_COLOUR('',#1603); +#1814 = STYLED_ITEM('color',(#1815),#1350); +#1815 = PRESENTATION_STYLE_ASSIGNMENT((#1816)); +#1816 = SURFACE_STYLE_USAGE(.BOTH.,#1817); +#1817 = SURFACE_SIDE_STYLE('',(#1818)); +#1818 = SURFACE_STYLE_FILL_AREA(#1819); +#1819 = FILL_AREA_STYLE('',(#1820)); +#1820 = FILL_AREA_STYLE_COLOUR('',#1603); +#1821 = STYLED_ITEM('color',(#1822),#1367); +#1822 = PRESENTATION_STYLE_ASSIGNMENT((#1823)); +#1823 = SURFACE_STYLE_USAGE(.BOTH.,#1824); +#1824 = SURFACE_SIDE_STYLE('',(#1825)); +#1825 = SURFACE_STYLE_FILL_AREA(#1826); +#1826 = FILL_AREA_STYLE('',(#1827)); +#1827 = FILL_AREA_STYLE_COLOUR('',#1603); +#1828 = STYLED_ITEM('color',(#1829),#1384); +#1829 = PRESENTATION_STYLE_ASSIGNMENT((#1830)); +#1830 = SURFACE_STYLE_USAGE(.BOTH.,#1831); +#1831 = SURFACE_SIDE_STYLE('',(#1832)); +#1832 = SURFACE_STYLE_FILL_AREA(#1833); +#1833 = FILL_AREA_STYLE('',(#1834)); +#1834 = FILL_AREA_STYLE_COLOUR('',#1603); +#1835 = STYLED_ITEM('color',(#1836),#1401); +#1836 = PRESENTATION_STYLE_ASSIGNMENT((#1837)); +#1837 = SURFACE_STYLE_USAGE(.BOTH.,#1838); +#1838 = SURFACE_SIDE_STYLE('',(#1839)); +#1839 = SURFACE_STYLE_FILL_AREA(#1840); +#1840 = FILL_AREA_STYLE('',(#1841)); +#1841 = FILL_AREA_STYLE_COLOUR('',#1603); +#1842 = STYLED_ITEM('color',(#1843),#1413); +#1843 = PRESENTATION_STYLE_ASSIGNMENT((#1844)); +#1844 = SURFACE_STYLE_USAGE(.BOTH.,#1845); +#1845 = SURFACE_SIDE_STYLE('',(#1846)); +#1846 = SURFACE_STYLE_FILL_AREA(#1847); +#1847 = FILL_AREA_STYLE('',(#1848)); +#1848 = FILL_AREA_STYLE_COLOUR('',#1603); +#1849 = STYLED_ITEM('color',(#1850),#1430); +#1850 = PRESENTATION_STYLE_ASSIGNMENT((#1851)); +#1851 = SURFACE_STYLE_USAGE(.BOTH.,#1852); +#1852 = SURFACE_SIDE_STYLE('',(#1853)); +#1853 = SURFACE_STYLE_FILL_AREA(#1854); +#1854 = FILL_AREA_STYLE('',(#1855)); +#1855 = FILL_AREA_STYLE_COLOUR('',#1603); +#1856 = STYLED_ITEM('color',(#1857),#1447); +#1857 = PRESENTATION_STYLE_ASSIGNMENT((#1858)); +#1858 = SURFACE_STYLE_USAGE(.BOTH.,#1859); +#1859 = SURFACE_SIDE_STYLE('',(#1860)); +#1860 = SURFACE_STYLE_FILL_AREA(#1861); +#1861 = FILL_AREA_STYLE('',(#1862)); +#1862 = FILL_AREA_STYLE_COLOUR('',#1603); +#1863 = STYLED_ITEM('color',(#1864),#1464); +#1864 = PRESENTATION_STYLE_ASSIGNMENT((#1865)); +#1865 = SURFACE_STYLE_USAGE(.BOTH.,#1866); +#1866 = SURFACE_SIDE_STYLE('',(#1867)); +#1867 = SURFACE_STYLE_FILL_AREA(#1868); +#1868 = FILL_AREA_STYLE('',(#1869)); +#1869 = FILL_AREA_STYLE_COLOUR('',#1603); +#1870 = STYLED_ITEM('color',(#1871),#1476); +#1871 = PRESENTATION_STYLE_ASSIGNMENT((#1872)); +#1872 = SURFACE_STYLE_USAGE(.BOTH.,#1873); +#1873 = SURFACE_SIDE_STYLE('',(#1874)); +#1874 = SURFACE_STYLE_FILL_AREA(#1875); +#1875 = FILL_AREA_STYLE('',(#1876)); +#1876 = FILL_AREA_STYLE_COLOUR('',#1603); +#1877 = STYLED_ITEM('color',(#1878),#1493); +#1878 = PRESENTATION_STYLE_ASSIGNMENT((#1879)); +#1879 = SURFACE_STYLE_USAGE(.BOTH.,#1880); +#1880 = SURFACE_SIDE_STYLE('',(#1881)); +#1881 = SURFACE_STYLE_FILL_AREA(#1882); +#1882 = FILL_AREA_STYLE('',(#1883)); +#1883 = FILL_AREA_STYLE_COLOUR('',#1603); +#1884 = STYLED_ITEM('color',(#1885),#1510); +#1885 = PRESENTATION_STYLE_ASSIGNMENT((#1886)); +#1886 = SURFACE_STYLE_USAGE(.BOTH.,#1887); +#1887 = SURFACE_SIDE_STYLE('',(#1888)); +#1888 = SURFACE_STYLE_FILL_AREA(#1889); +#1889 = FILL_AREA_STYLE('',(#1890)); +#1890 = FILL_AREA_STYLE_COLOUR('',#1603); +#1891 = STYLED_ITEM('color',(#1892),#1527); +#1892 = PRESENTATION_STYLE_ASSIGNMENT((#1893)); +#1893 = SURFACE_STYLE_USAGE(.BOTH.,#1894); +#1894 = SURFACE_SIDE_STYLE('',(#1895)); +#1895 = SURFACE_STYLE_FILL_AREA(#1896); +#1896 = FILL_AREA_STYLE('',(#1897)); +#1897 = FILL_AREA_STYLE_COLOUR('',#1603); +ENDSEC; +END-ISO-10303-21;
package.jsonadded+172@@ -0,0 +1,172 @@+{+ "slug": "gbu808",+ "version": "0.1.0",+ "type": "component",+ "description": "MDD（Microdiode Electronics） Bridge Rectifiers, GBU. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "diodes",+ "gbu808",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gbu808.kicad_sym",+ "gbu808.kicad_mod",+ "gbu808.glb",+ "gbu808.step",+ "gbu808.lbr",+ "docs/hero.png",+ "docs/gbu808-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "gbu808-hero.glb",+ "gbu808-hero.overlay.json",+ "gbu808-etched.glb"+ ],+ "component": {+ "mpn": "GBU808",+ "manufacturer": "MDD（Microdiode Electronics）",+ "package": "GBU",+ "pin_count": 4,+ "category": "Diodes",+ "subcategory": "Bridge Rectifiers",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/da8cecc542f6307f80e9e82f83150d47.pdf",+ "parts": {+ "symbol": "gbu808.kicad_sym",+ "footprint": "gbu808.kicad_mod",+ "model_3d": "gbu808-hero.glb",+ "model_3d_plain": "gbu808-etched.glb",+ "model_3d_step": "gbu808-etched.step",+ "model_3d_step_plain": "gbu808.step",+ "lbr": "gbu808.lbr"+ },+ "distributor_links": {+ "lcsc": "C3072",+ "digikey": "GBU808-ND",+ "mouser": "621-GBU808"+ },+ "distributor_check": {+ "checked_at": "2026-10-21T05:48:30Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "GBU808-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "621-GBU808",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "+",+ "type": "passive",+ "description": "Positive DC output terminal of the bridge; the GBU808 is rated 8.0 A average forward current (I(AV)) and 800 V VRRM."+ },+ {+ "number": "2",+ "name": "2",+ "type": "passive",+ "description": "AC input terminal; the GBU808 is rated for 560 V maximum RMS voltage (VRMS)."+ },+ {+ "number": "3",+ "name": "3",+ "type": "passive",+ "description": "AC input terminal; the GBU808 is rated for 560 V maximum RMS voltage (VRMS)."+ },+ {+ "number": "4",+ "name": "-",+ "type": "passive",+ "description": "Negative DC output terminal of the bridge; the GBU808 is rated 8.0 A average forward current (I(AV)) and 800 V VDC blocking voltage."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers 1-4 and the +, ~, ~, - order are read from the small schematic symbol on page 1 (circled",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 3,+ "cost_usd": 0.1517,+ "at": "2026-10-21T05:45:28"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/da8cecc542f6307f80e9e82f83150d47.pdf",+ "pages": 3,+ "sha256": "180b29044288d80c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 4,+ "described": 4,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "gbu808.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 22.1,+ 3.4,+ 36.4+ ],+ "zmin_mm": -16.0,+ "centre_offset_mm": 0.6,+ "footprint_binding": "identity",+ "sha256": "8031b8811f103efe801ea21c1e48def9cf6d14d909a4b82ba505562fec514beb",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "gbu808-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 22.1,+ 3.4,+ 36.4+ ],+ "zmin_mm": -16.0,+ "centre_offset_mm": 0.6,+ "footprint_binding": "identity",+ "sha256": "ff244022e97ceb1cf127d04ba520b1f7d2ac1423f4f0c8e7a479faffe873249d",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+178@@ -0,0 +1,178 @@+{+ "slug": "gbu808",+ "version": "0.1.0",+ "type": "component",+ "description": "MDD（Microdiode Electronics） Bridge Rectifiers, GBU. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "diodes",+ "gbu808",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gbu808.kicad_sym",+ "gbu808.kicad_mod",+ "gbu808.glb",+ "gbu808.step",+ "gbu808.lbr",+ "docs/hero.png",+ "docs/gbu808-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "gbu808-hero.glb",+ "gbu808-hero.overlay.json",+ "gbu808-etched.glb"+ ],+ "component": {+ "mpn": "GBU808",+ "manufacturer": "MDD（Microdiode Electronics）",+ "package": "GBU",+ "pin_count": 4,+ "category": "Diodes",+ "subcategory": "Bridge Rectifiers",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/da8cecc542f6307f80e9e82f83150d47.pdf",+ "parts": {+ "symbol": "gbu808.kicad_sym",+ "footprint": "gbu808.kicad_mod",+ "model_3d": "gbu808-hero.glb",+ "model_3d_plain": "gbu808-etched.glb",+ "model_3d_step": "gbu808-etched.step",+ "model_3d_step_plain": "gbu808.step",+ "lbr": "gbu808.lbr"+ },+ "distributor_links": {+ "lcsc": "C3072",+ "digikey": "GBU808-ND",+ "mouser": "621-GBU808"+ },+ "distributor_check": {+ "checked_at": "2026-10-21T05:48:30Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "GBU808-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "621-GBU808",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "+",+ "type": "passive",+ "description": "Positive DC output terminal of the bridge; the GBU808 is rated 8.0 A average forward current (I(AV)) and 800 V VRRM."+ },+ {+ "number": "2",+ "name": "2",+ "type": "passive",+ "description": "AC input terminal; the GBU808 is rated for 560 V maximum RMS voltage (VRMS)."+ },+ {+ "number": "3",+ "name": "3",+ "type": "passive",+ "description": "AC input terminal; the GBU808 is rated for 560 V maximum RMS voltage (VRMS)."+ },+ {+ "number": "4",+ "name": "-",+ "type": "passive",+ "description": "Negative DC output terminal of the bridge; the GBU808 is rated 8.0 A average forward current (I(AV)) and 800 V VDC blocking voltage."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers 1-4 and the +, ~, ~, - order are read from the small schematic symbol on page 1 (circled",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 3,+ "cost_usd": 0.1517,+ "at": "2026-10-21T05:45:28"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/da8cecc542f6307f80e9e82f83150d47.pdf",+ "pages": 3,+ "sha256": "180b29044288d80c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 4,+ "described": 4,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "gbu808.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 22.1,+ 3.4,+ 36.4+ ],+ "zmin_mm": -16,+ "centre_offset_mm": 0.6,+ "footprint_binding": "identity",+ "sha256": "8031b8811f103efe801ea21c1e48def9cf6d14d909a4b82ba505562fec514beb",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "gbu808-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 22.1,+ 3.4,+ 36.4+ ],+ "zmin_mm": -16,+ "centre_offset_mm": 0.6,+ "footprint_binding": "identity",+ "sha256": "ff244022e97ceb1cf127d04ba520b1f7d2ac1423f4f0c8e7a479faffe873249d",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>gbu808</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>gbu808</title>