← Commit history

Set visibility: public

Ray ·fc858d5f9b · ·parent 8d42823
1 file changed +9−6
page.json+9−6
@@ -32,7 +32,7 @@         "number": "1",         "name": "BOOT",         "type": "power_in",-        "description": "Power supply for the high-side power MOSFET gate driver. Requires a 0.1\u00b5F or larger ceramic bootstrap capacitor connected between BOOT and SW. BOOT-to-SW rated 0 to 6V."+        "description": "Power supply for the high-side power MOSFET gate driver. Requires a 0.1µF or larger ceramic bootstrap capacitor connected between BOOT and SW. BOOT-to-SW rated 0 to 6V."       },       {         "number": "2",@@ -50,19 +50,19 @@         "number": "4",         "name": "RT",         "type": "input",-        "description": "Resistor-programmed switching-frequency timing pin. Connect a resistor to GND to set fSW between 200kHz and 2.5MHz (R=200k\u03a9 \u2192 ~500kHz typical)."+        "description": "Resistor-programmed switching-frequency timing pin. Connect a resistor to GND to set fSW between 200kHz and 2.5MHz (R=200kΩ → ~500kHz typical)."       },       {         "number": "5",         "name": "FB",         "type": "input",-        "description": "Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB and from FB to GND; the device regulates FB to the internal 0.8V (\u00b11%) reference."+        "description": "Buck converter output feedback sensing input. Connect a resistor divider from VOUT to FB and from FB to GND; the device regulates FB to the internal 0.8V (±1%) reference."       },       {         "number": "6",         "name": "PG/SS",         "type": "output",-        "description": "On GBI1631 this pin is the Power-Good (PG) open-drain flag; pull up with a 10k\u03a9 to 100k\u03a9 resistor to a logic rail or DC voltage \u22647V. On GBI1630 the same pin is SS (soft-start), where a capacitor to GND programs the soft-start time. For the GBI1631SMAR variant this pin functions as PG."+        "description": "On GBI1631 this pin is the Power-Good (PG) open-drain flag; pull up with a 10kΩ to 100kΩ resistor to a logic rail or DC voltage ≤7V. On GBI1630 the same pin is SS (soft-start), where a capacitor to GND programs the soft-start time. For the GBI1631SMAR variant this pin functions as PG."       },       {         "number": "7",@@ -80,7 +80,7 @@         "number": "9",         "name": "EP",         "type": "power_in",-        "description": "Exposed thermal pad on the bottom of the eSOP-8L package. Must be soldered to the PCB ground plane for proper thermal dissipation (R\u03b8JC_bot = 3.8 \u00b0C/W)."+        "description": "Exposed thermal pad on the bottom of the eSOP-8L package. Must be soldered to the PCB ground plane for proper thermal dissipation (RθJC_bot = 3.8 °C/W)."       }     ],     "provenance": {@@ -144,5 +144,8 @@     "docs/gbi1631smar-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file