component
G9336ADJTP1U
Public Made by Adomby adom
GMT(Global Mixed-mode Tech) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
G9336ADJTP1U
GMT(Global Mixed-mode Tech) · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-6
G9336ADJTP1U from GMT(Global Mixed-mode Tech), in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply input, specified at 4.5V to 5.5V in the electrical characteristics. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | PGD | output | Open-drain power good output that is pulled low when the output falls below the power good threshold, typically 88% of the programmed output voltage (94% during startup). |
| 4 | EN | input | Active-high enable control that turns the device on when pulled above 1.3V and should not be allowed to float. |
| 5 | ADJ | input | Sense input for setting the output voltage against the 0.5V reference with ±1.5% accuracy. |
| 6 | DRV | output | Gate drive output to the external N-channel MOSFET, which can pull up to 4.9V and sinks typically 9.5mA and sources typically 1.8mA in normal operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GMT(Global Mixed-mode Tech) |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VCC | 4.5 | 5.5 | V | 2 | ||
| Quiescent Current | IQ(STANDBY) | 350 | 500 | µA | 2 | ||
| Shutdown Current | IQ(OFF) | -1 | 1 | µA | VEN = 0V | 2 | |
| EN Pin Input Voltage High | VIH | 1.3 | V | 2 | |||
| EN Pin Input Voltage Low | VIL | 0.7 | V | 2 | |||
| EN Pin Input Current | IEN | -1 | 1 | µA | 2 | ||
| ADJ Pin Reference Voltage tolerance | VADJ | -1.5 | 1.5 | % | 2 | ||
| ADJ Pin Input Current | IADJ | -100 | 100 | nA | VADJ = 0.5V | 2 | |
| DRV Pin Output Current (startup, sourcing) | IDRV(SS) | 10 | 20 | 30 | µA | sourcing, VADJ = 0V (startup) | 2 |
| DRV Pin Output Current (normal, sourcing) | IDRV(SRC) | 1.3 | 1.95 | 2.6 | mA | sourcing, VADJ = 0.48V (normal) | 2 |
| DRV Pin Output Current (sinking) | IDRV(SINK) | 6 | 9.5 | 13 | mA | sinking, VADJ = 0.52V | 2 |
| DRV Pin Output Voltage | VDRV | 4.9 | 5 | V | VCC = 5V, VADJ = 0.48V, no load | 2 | |
| Output Voltage UVLO Threshold | VTH(UV) | 40 | 50 | 60 | %VADJ | measured at ADJ pin | 2 |
| Power Good Threshold | VTH(PGD) | 85 | 88 | 91 | %VADJ | measured at ADJ pin | 2 |
| PGD Pin Output Low Voltage | 0.4 | V | IPGD = 1mA | 2 | |||
| PGD Pin Leakage Current | IPGD | -1 | 1 | µA | VADJ = 0.5V, VPGD = 6V | 2 | |
| VCC, EN, PGD, ADJ, VOUT to GND | -0.3 | 7 | V | VCC, EN, PGD, ADJ, VOUT to GND | 2 | ||
| DRV to GND | -0.3 | V | DRV to GND, maximum printed as VCC+0.3V | 2 | |||
| Continuous Power Dissipation | 0.5 | W | TA = +25°C, TSOT-23-6 | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Reflow Temperature | 260 | °C | soldering, 10sec | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Thermal Resistance Junction to Case | θJC | 60 | °C/W | TSOT-23-6 | 2 |
CAD (KiCad official)
- Symbol:
G9336ADJTP1U - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
g9336adjtp1u-etched.step/g9336adjtp1u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);g9336adjtp1u.step/g9336adjtp1u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GMT(Global Mixed-mode Tech) datasheet (8 pp, sha256
5c54fcbc0a2c5b3d, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# G9336ADJTP1U
**GMT(Global Mixed-mode Tech)** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-6
G9336ADJTP1U from GMT(Global Mixed-mode Tech), in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply input, specified at 4.5V to 5.5V in the electrical characteristics. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | PGD | output | Open-drain power good output that is pulled low when the output falls below the power good threshold, typically 88% of the programmed output voltage (94% during startup). |
| 4 | EN | input | Active-high enable control that turns the device on when pulled above 1.3V and should not be allowed to float. |
| 5 | ADJ | input | Sense input for setting the output voltage against the 0.5V reference with ±1.5% accuracy. |
| 6 | DRV | output | Gate drive output to the external N-channel MOSFET, which can pull up to 4.9V and sinks typically 9.5mA and sources typically 1.8mA in normal operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GMT(Global Mixed-mode Tech) |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VCC | 4.5 | | 5.5 | V | | 2 |
| Quiescent Current | IQ(STANDBY) | | 350 | 500 | µA | | 2 |
| Shutdown Current | IQ(OFF) | -1 | | 1 | µA | VEN = 0V | 2 |
| EN Pin Input Voltage High | VIH | 1.3 | | | V | | 2 |
| EN Pin Input Voltage Low | VIL | | | 0.7 | V | | 2 |
| EN Pin Input Current | IEN | -1 | | 1 | µA | | 2 |
| ADJ Pin Reference Voltage tolerance | VADJ | -1.5 | | 1.5 | % | | 2 |
| ADJ Pin Input Current | IADJ | -100 | | 100 | nA | VADJ = 0.5V | 2 |
| DRV Pin Output Current (startup, sourcing) | IDRV(SS) | 10 | 20 | 30 | µA | sourcing, VADJ = 0V (startup) | 2 |
| DRV Pin Output Current (normal, sourcing) | IDRV(SRC) | 1.3 | 1.95 | 2.6 | mA | sourcing, VADJ = 0.48V (normal) | 2 |
| DRV Pin Output Current (sinking) | IDRV(SINK) | 6 | 9.5 | 13 | mA | sinking, VADJ = 0.52V | 2 |
| DRV Pin Output Voltage | VDRV | 4.9 | | 5 | V | VCC = 5V, VADJ = 0.48V, no load | 2 |
| Output Voltage UVLO Threshold | VTH(UV) | 40 | 50 | 60 | %VADJ | measured at ADJ pin | 2 |
| Power Good Threshold | VTH(PGD) | 85 | 88 | 91 | %VADJ | measured at ADJ pin | 2 |
| PGD Pin Output Low Voltage | | | | 0.4 | V | IPGD = 1mA | 2 |
| PGD Pin Leakage Current | IPGD | -1 | | 1 | µA | VADJ = 0.5V, VPGD = 6V | 2 |
| VCC, EN, PGD, ADJ, VOUT to GND | | -0.3 | | 7 | V | VCC, EN, PGD, ADJ, VOUT to GND | 2 |
| DRV to GND | | -0.3 | | | V | DRV to GND, maximum printed as VCC+0.3V | 2 |
| Continuous Power Dissipation | | | | 0.5 | W | TA = +25°C, TSOT-23-6 | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Reflow Temperature | | | | 260 | °C | soldering, 10sec | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | | 2 |
| Thermal Resistance Junction to Case | θJC | | 60 | | °C/W | TSOT-23-6 | 2 |
## CAD (KiCad official)
- Symbol: `G9336ADJTP1U`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `g9336adjtp1u-etched.step` / `g9336adjtp1u-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `g9336adjtp1u.step` / `g9336adjtp1u.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GMT(Global Mixed-mode Tech) datasheet](docs/g9336adjtp1u-datasheet.pdf) (8 pp, sha256 `5c54fcbc0a2c5b3d`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/g9336adjtp1u-datasheet.pdf)