Fusion - the Fusion 360 Bridge

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.7.0">
<drawing>
<settings>
<setting alwaysvectorfont="no"/>
<setting verticaltext="up"/>
<setting violationmode="Push"/>
<drillsymbolsettings symboldiameter="650240" symbolwidth="8128">
<drill diameter="64000" />
<drill diameter="80000" />
<drill diameter="96000" />
<drill diameter="112000" />
<drill diameter="128000" />
<drill diameter="144000" />
<drill diameter="160000" />
<drill diameter="176000" />
<drill diameter="192000" />
<drill diameter="208000" />
<drill diameter="224000" />
<drill diameter="240000" />
<drill diameter="256000" />
<drill diameter="272000" />
<drill diameter="288000" />
<drill diameter="320000" />
</drillsymbolsettings>
</settings>
<grid distance="1" unitdist="mm" unit="mm" style="lines" multiple="1" display="no" altdistance="0.1" altunitdist="mm" altunit="mm"/>
<layers>
<layer number="1" name="Top" blackcolor="0xc8ff4164" whitecolor="0xccc90d0c" coloredcolor="0xccc90d0c" blackhighlight="0xccff0000" whitehighlight="0xb4ff0000" coloredhighlight="0xb4ff0000" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="16" name="Bottom" blackcolor="0xc80696d7" whitecolor="0xcc0696d7" coloredcolor="0xcc0696d7" blackhighlight="0xb40000ff" whitehighlight="0xcc8252c2" coloredhighlight="0xcc8252c2" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="17" name="Pads" blackcolor="0xb462d987" whitecolor="0xb462d987" coloredcolor="0xcc0dab76" blackhighlight="0xb400ff00" whitehighlight="0xb400ff00" coloredhighlight="0xb400ff00" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="18" name="Vias" blackcolor="0xb462d987" whitecolor="0xb462d987" coloredcolor="0xccffcd07" blackhighlight="0xb462d987" whitehighlight="0xb462d987" coloredhighlight="0xccffcd07" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="19" name="Unrouted" blackcolor="0xccd9d9d9" whitecolor="0xbbc8c832" coloredcolor="0xbbc8c832" blackhighlight="0xb462d987" whitehighlight="0xb462d987" coloredhighlight="0xccffcd07" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="20" name="Dimension" blackcolor="0xb462d986" whitecolor="0xb462d986" coloredcolor="0xcceec643" blackhighlight="0xb462d986" whitehighlight="0xb462d986" coloredhighlight="0xcceec643" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="21" name="tPlace" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd134" coloredhighlight="0xccafd134" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="22" name="bPlace" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd134" coloredhighlight="0xccafd134" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="23" name="tOrigins" blackcolor="0xc8ffffff" whitecolor="0xccafd134" coloredcolor="0xccafd134" blackhighlight="0xc8ffffff" whitehighlight="0xccafd134" coloredhighlight="0xccafd134" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="24" name="bOrigins" blackcolor="0xc8ffffff" whitecolor="0xccafd134" coloredcolor="0xccafd134" blackhighlight="0xc8ffffff" whitehighlight="0xccafd134" coloredhighlight="0xccafd134" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="25" name="tNames" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd134" coloredhighlight="0xccafd134" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="26" name="bNames" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd134" coloredhighlight="0xccafd134" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="27" name="tValues" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd135" coloredhighlight="0xccafd135" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="28" name="bValues" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd136" coloredhighlight="0xccafd136" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="29" name="tStop" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd137" coloredhighlight="0xccafd137" fill="3" visible="no" active="yes" locked="no"/>
<layer number="30" name="bStop" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd138" coloredhighlight="0xccafd138" fill="6" visible="no" active="yes" locked="no"/>
<layer number="31" name="tCream" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd139" coloredhighlight="0xccafd139" fill="4" visible="no" active="yes" locked="no"/>
<layer number="32" name="bCream" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="5" visible="no" active="yes" locked="no"/>
<layer number="33" name="tFinish" blackcolor="0xccd9d9d9" whitecolor="0xbbc8c832" coloredcolor="0xbbc8c832" blackhighlight="0xb462d987" whitehighlight="0xb462d987" coloredhighlight="0xccffcd07" fill="3" visible="no" active="yes" locked="no"/>
<layer number="34" name="bFinish" blackcolor="0xccd9d9d9" whitecolor="0xbbc8c832" coloredcolor="0xbbc8c832" blackhighlight="0xb462d987" whitehighlight="0xb462d987" coloredhighlight="0xccffcd07" fill="6" visible="no" active="yes" locked="no"/>
<layer number="35" name="tGlue" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="4" visible="no" active="yes" locked="no"/>
<layer number="36" name="bGlue" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="5" visible="no" active="yes" locked="no"/>
<layer number="37" name="tTest" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="1" visible="no" active="yes" locked="no"/>
<layer number="38" name="bTest" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="1" visible="no" active="yes" locked="no"/>
<layer number="39" name="tKeepout" blackcolor="0xc8ff4164" whitecolor="0xccc90d0c" coloredcolor="0xccc90d0c" blackhighlight="0xccff0000" whitehighlight="0xb4ff0000" coloredhighlight="0xb4ff0000" fill="11" visible="no" active="yes" locked="no"/>
<layer number="40" name="bKeepout" blackcolor="0xc80696d7" whitecolor="0xcc0696d7" coloredcolor="0xcc0696d7" blackhighlight="0xb40000ff" whitehighlight="0xcc8252c2" coloredhighlight="0xcc8252c2" fill="11" visible="no" active="yes" locked="no"/>
<layer number="41" name="RestrictCopper" blackcolor="0xc8ff4164" whitecolor="0xccc90d0c" coloredcolor="0xccc90d0c" blackhighlight="0xccff0000" whitehighlight="0xb4ff0000" coloredhighlight="0xb4ff0000" fill="10" visible="no" active="yes" locked="no"/>
<layer number="42" name="bRestrict" blackcolor="0xc80696d7" whitecolor="0xcc0696d7" coloredcolor="0xcc0696d7" blackhighlight="0xb40000ff" whitehighlight="0xcc8252c2" coloredhighlight="0xcc8252c2" fill="10" visible="no" active="yes" locked="no"/>
<layer number="43" name="vRestrict" blackcolor="0xb462d987" whitecolor="0xb462d987" coloredcolor="0xcc0dab76" blackhighlight="0xb400ff00" whitehighlight="0xb400ff00" coloredhighlight="0xb400ff00" fill="10" visible="no" active="yes" locked="no"/>
<layer number="44" name="Drills" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="1" visible="no" active="yes" locked="no"/>
<layer number="45" name="Holes" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="1" visible="no" active="yes" locked="no"/>
<layer number="46" name="Milling" blackcolor="0xcc32c8c8" whitecolor="0xb432c8c8" coloredcolor="0xb432c8c8" blackhighlight="0xb400ffff" whitehighlight="0xb400ffff" coloredhighlight="0xb400ffff" fill="1" visible="no" active="yes" locked="no"/>
<layer number="47" name="Measures" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd140" coloredhighlight="0xccafd140" fill="1" visible="no" active="yes" locked="no"/>
<layer number="48" name="Document" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd141" coloredhighlight="0xccafd141" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="49" name="Reference" blackcolor="0xccc8c8c8" whitecolor="0xbb808080" coloredcolor="0xbb808080" blackhighlight="0xc8ffffff" whitehighlight="0xccafd142" coloredhighlight="0xccafd142" fill="1" visible="yes" active="yes" locked="no"/>
<layer number="91" name="Nets" blackcolor="0xdc009292" whitecolor="0xdc009292" coloredcolor="0xc8e3e3e3" blackhighlight="0xdc009292" whitehighlight="0xdc009292" coloredhighlight="0xc8e3e3e3" fill="1" visible="no" active="no" locked="no"/>
<layer number="92" name="Busses" blackcolor="0xdc009292" whitecolor="0xdc009292" coloredcolor="0xc8d62525" blackhighlight="0xdc009292" whitehighlight="0xdc009292" coloredhighlight="0xc8d62525" fill="1" visible="no" active="no" locked="no"/>
<layer number="93" name="Pins" blackcolor="0xdcbbbbbb" whitecolor="0xdcbbbbbb" coloredcolor="0xc839d437" blackhighlight="0xdcbbbbbb" whitehighlight="0xdcbbbbbb" coloredhighlight="0xc839d437" fill="1" visible="no" active="no" locked="no"/>
<layer number="94" name="Symbols" blackcolor="0xdcfac36e" whitecolor="0xdcf57c10" coloredcolor="0xc8e6e600" blackhighlight="0xdcfac36e" whitehighlight="0xdcf57c10" coloredhighlight="0xc8e6e600" fill="1" visible="no" active="no" locked="no"/>
<layer number="95" name="Names" blackcolor="0xf0b2b2b2" whitecolor="0xc8757575" coloredcolor="0xc82c7bce" blackhighlight="0xf0b2b2b2" whitehighlight="0xc8757575" coloredhighlight="0xc82c7bce" fill="1" visible="no" active="no" locked="no"/>
<layer number="96" name="Values" blackcolor="0xf0b2b2b2" whitecolor="0xc8757575" coloredcolor="0xc82c7bce" blackhighlight="0xf0b2b2b2" whitehighlight="0xc8757575" coloredhighlight="0xc82c7bce" fill="1" visible="no" active="no" locked="no"/>
<layer number="97" name="Info" blackcolor="0xf0b2b2b2" whitecolor="0xc8757575" coloredcolor="0xc89526de" blackhighlight="0xf0b2b2b2" whitehighlight="0xc8757575" coloredhighlight="0xc89526de" fill="1" visible="no" active="no" locked="no"/>
<layer number="98" name="Guide" blackcolor="0xf0b2b2b2" whitecolor="0xc8757575" coloredcolor="0xc89526de" blackhighlight="0xf0b2b2b2" whitehighlight="0xc8757575" coloredhighlight="0xc89526de" fill="1" visible="no" active="no" locked="no"/>
</layers>
<board>
<plain>
<wire x1="38" y1="24" x2="132" y2="24" width="0" layer="20"/>
<wire x1="132" y1="24" x2="132" y2="133" width="0" layer="20"/>
<wire x1="132" y1="133" x2="38" y2="133" width="0" layer="20"/>
<wire x1="38" y1="133" x2="38" y2="24" width="0" layer="20"/>
<text x="48" y="129" size="2" layer="21">ADOM / 24-NET CROSSOVER</text>
<text x="49" y="26" size="1.3" layer="21">ASTRA &gt; ADOM BRIDGE &gt; FUSION</text>
<text x="63" y="118" size="1.3" layer="21">24 NETS / 72 PADS / 2 LAYERS</text>
</plain>
<namedviews>
</namedviews>
<libraries>
<library name="FusionCrossbarFixture">
<packages>
<package name="J1" use_placeholder="yes">
<smd name="1" x="45" y="52" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="2" x="45" y="54.54" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="3" x="45" y="57.08" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="4" x="45" y="59.62" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="5" x="45" y="62.16" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="6" x="45" y="64.7" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="7" x="45" y="67.24" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="8" x="45" y="69.78" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="9" x="45" y="72.32" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="10" x="45" y="74.86" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="11" x="45" y="77.4" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="12" x="45" y="79.94" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="13" x="45" y="82.48" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="14" x="45" y="85.02" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="15" x="45" y="87.56" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="16" x="45" y="90.1" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="17" x="45" y="92.64" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="18" x="45" y="95.18" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="19" x="45" y="97.72" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="20" x="45" y="100.26" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="21" x="45" y="102.8" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="22" x="45" y="105.34" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="23" x="45" y="107.88" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="24" x="45" y="110.42" dx="1.5" dy="1.5" layer="1" roundness="20"/>
</package>
<package name="J2" use_placeholder="yes">
<smd name="1" x="65" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="8" x="82.78" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="15" x="100.56" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="22" x="118.34" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="5" x="75.16" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="12" x="92.94" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="19" x="110.72" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="2" x="67.54" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="9" x="85.32" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="16" x="103.1" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="23" x="120.88" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="6" x="77.7" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="13" x="95.48" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="20" x="113.26" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="3" x="70.08" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="10" x="87.86" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="17" x="105.64" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="24" x="123.42" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="7" x="80.24" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="14" x="98.02" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="21" x="115.8" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="4" x="72.62" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="11" x="90.4" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
<smd name="18" x="108.18" y="35" dx="1.5" dy="1.5" layer="1" roundness="20"/>
</package>
<package name="J3" use_placeholder="yes">
<pad name="1" x="65" y="125" drill="0.8" diameter="1.5"/>
<pad name="8" x="82.78" y="125" drill="0.8" diameter="1.5"/>
<pad name="15" x="100.56" y="125" drill="0.8" diameter="1.5"/>
<pad name="22" x="118.34" y="125" drill="0.8" diameter="1.5"/>
<pad name="5" x="75.16" y="125" drill="0.8" diameter="1.5"/>
<pad name="12" x="92.94" y="125" drill="0.8" diameter="1.5"/>
<pad name="19" x="110.72" y="125" drill="0.8" diameter="1.5"/>
<pad name="2" x="67.54" y="125" drill="0.8" diameter="1.5"/>
<pad name="9" x="85.32" y="125" drill="0.8" diameter="1.5"/>
<pad name="16" x="103.1" y="125" drill="0.8" diameter="1.5"/>
<pad name="23" x="120.88" y="125" drill="0.8" diameter="1.5"/>
<pad name="6" x="77.7" y="125" drill="0.8" diameter="1.5"/>
<pad name="13" x="95.48" y="125" drill="0.8" diameter="1.5"/>
<pad name="20" x="113.26" y="125" drill="0.8" diameter="1.5"/>
<pad name="3" x="70.08" y="125" drill="0.8" diameter="1.5"/>
<pad name="10" x="87.86" y="125" drill="0.8" diameter="1.5"/>
<pad name="17" x="105.64" y="125" drill="0.8" diameter="1.5"/>
<pad name="24" x="123.42" y="125" drill="0.8" diameter="1.5"/>
<pad name="7" x="80.24" y="125" drill="0.8" diameter="1.5"/>
<pad name="14" x="98.02" y="125" drill="0.8" diameter="1.5"/>
<pad name="21" x="115.8" y="125" drill="0.8" diameter="1.5"/>
<pad name="4" x="72.62" y="125" drill="0.8" diameter="1.5"/>
<pad name="11" x="90.4" y="125" drill="0.8" diameter="1.5"/>
<pad name="18" x="108.18" y="125" drill="0.8" diameter="1.5"/>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<classes>
<class number="0" name="default" width="0.3" drill="0.3">
</class>
</classes>
<designrules name="FusionCrossbarFixture" version="V1">
<rules>
<rulecategory type="Copper Clearance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Keepout Clearance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Solder-Mask Clearance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Dimension Clearance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Drill Distance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Restrict Clearance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Minimum Drill Size" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Minimum Copper Width" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Acute Angle" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Air-Wire" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Small Gap" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Wire Stub" manualdrc="yes" livedrc="no"/>
 <rulecategory type="Matched Lengths" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Via Restrict Clearance" manualdrc="yes" livedrc="yes"/>
 <rulecategory type="Teardrop" manualdrc="no" livedrc="no"/>
 <rule type="Minimum Copper Width" enabled="yes" priority="0" onescope="class=0" value="0.3mm" preferredvalue="0.3mm" check_polywidth="no" name="minimum-copper-width-1"/>
 <rule type="Minimum Copper Width" builtin_ruleid="14" enabled="yes" priority="1" value="0.2mm" preferredvalue="0.2mm" check_polywidth="no" name="minimum-copper-width-2"/>
 <rule type="Teardrop" builtin_ruleid="22" enabled="yes" priority="0" onescope="is_via" lengthratio="0.5" widthratio="0.7" curved_sides="no" auto_generate="no" name="teardrop-1"/>
 <rule type="Teardrop" builtin_ruleid="23" enabled="yes" priority="1" onescope="is_pad" lengthratio="0.5" widthratio="0.7" curved_sides="no" auto_generate="no" name="teardrop-2"/>
 <rule type="Teardrop" builtin_ruleid="24" enabled="yes" priority="2" onescope="is_smd" lengthratio="0.5" widthratio="0.7" curved_sides="no" auto_generate="no" name="teardrop-3"/>
 <rule type="Teardrop" builtin_ruleid="25" enabled="yes" priority="3" onescope="is_wire_polygon" lengthratio="0.5" widthratio="0.9" curved_sides="no" auto_generate="no" name="teardrop-4"/>
 <rule type="Minimum Drill Size" enabled="yes" priority="0" onescope="class=0" value="0.3mm" preferredvalue="0.3mm" name="minimum-drill-size-1"/>
 <rule type="Minimum Drill Size" builtin_ruleid="15" enabled="yes" priority="1" value="0.3mm" preferredvalue="0.3mm" name="minimum-drill-size-2"/>
 <rule type="Acute Angle" builtin_ruleid="16" enabled="no" priority="0" name="acute-angle-1"/>
 <rule type="Wire Stub" builtin_ruleid="17" enabled="yes" priority="0" name="wire-stub-1"/>
 <rule type="Air-Wire" builtin_ruleid="19" enabled="yes" priority="0" name="air-wire-1"/>
 <rule type="Matched Lengths" builtin_ruleid="20" enabled="yes" priority="0" tolerance="10mm" gapfactor="2.5" name="matched-lengths-1"/>
 <rule type="Copper Clearance" builtin_ruleid="0" enabled="yes" priority="0" onescope="is_wire_polygon" otherscope="is_wire_polygon" value="0.2mm" preferredvalue="0.2mm" samesignal="no" name="copper-clearance-1"/>
 <rule type="Copper Clearance" builtin_ruleid="1" enabled="yes" priority="1" onescope="is_wire_polygon" otherscope="is_pad_smd" value="0.2mm" preferredvalue="0.2mm" samesignal="no" name="copper-clearance-2"/>
 <rule type="Copper Clearance" builtin_ruleid="2" enabled="yes" priority="2" onescope="is_wire_polygon" otherscope="is_via" value="0.2mm" preferredvalue="0.2mm" samesignal="no" name="copper-clearance-3"/>
 <rule type="Copper Clearance" builtin_ruleid="3" enabled="yes" priority="3" onescope="is_pad_smd" otherscope="is_pad_smd" value="6mil" preferredvalue="6mil" samesignal="no" name="copper-clearance-4"/>
 <rule type="Copper Clearance" builtin_ruleid="4" enabled="yes" priority="4" onescope="is_pad_smd" otherscope="is_via" value="6mil" preferredvalue="6mil" samesignal="no" name="copper-clearance-5"/>
 <rule type="Copper Clearance" builtin_ruleid="5" enabled="yes" priority="5" onescope="is_via" otherscope="is_via" value="6mil" preferredvalue="6mil" samesignal="no" name="copper-clearance-6"/>
 <rule type="Copper Clearance" builtin_ruleid="6" enabled="yes" priority="6" onescope="is_smd" otherscope="is_pad" value="6mil" preferredvalue="6mil" samesignal="yes" name="copper-clearance-7"/>
 <rule type="Copper Clearance" builtin_ruleid="7" enabled="yes" priority="7" onescope="is_smd" otherscope="is_via" value="6mil" preferredvalue="6mil" samesignal="yes" name="copper-clearance-8"/>
 <rule type="Copper Clearance" builtin_ruleid="8" enabled="yes" priority="8" onescope="is_smd" otherscope="is_smd" value="6mil" preferredvalue="6mil" samesignal="yes" name="copper-clearance-9"/>
 <rule type="Dimension Clearance" builtin_ruleid="9" enabled="yes" priority="0" value="0.5mm" preferredvalue="0.5mm" name="dimension-clearance-1"/>
 <rule type="Via Restrict Clearance" builtin_ruleid="21" enabled="yes" priority="0" value="0mil" preferredvalue="0mil" name="via-restrict-clearance-1"/>
 <rule type="Restrict Clearance" builtin_ruleid="10" enabled="yes" priority="0" value="0mil" preferredvalue="0mil" name="restrict-clearance-1"/>
 <rule type="Small Gap" builtin_ruleid="18" enabled="yes" priority="0" name="small-gap-1"/>
 <rule type="Solder-Mask Clearance" builtin_ruleid="11" enabled="no" priority="0" value="0mil" preferredvalue="0mil" check_name="yes" check_value="no" name="solder-mask-clearance-1"/>
 <rule type="Drill Distance" builtin_ruleid="12" enabled="yes" priority="0" value="6mil" preferredvalue="6mil" name="drill-distance-1"/>
 <rule type="Keepout Clearance" builtin_ruleid="13" enabled="yes" priority="0" value="0mil" preferredvalue="0mil" name="keepout-clearance-1"/>
 </rules>
<param name="mdWireWire" value="0.2mm"/>
<param name="mdWirePad" value="0.2mm"/>
<param name="mdWireVia" value="0.2mm"/>
<param name="mdPadPad" value="6mil"/>
<param name="mdPadVia" value="6mil"/>
<param name="mdViaVia" value="6mil"/>
<param name="mdSmdPad" value="6mil"/>
<param name="mdSmdVia" value="6mil"/>
<param name="mdSmdSmd" value="6mil"/>
<param name="mdCopperDimension" value="0.5mm"/>
<param name="mdDrill" value="6mil"/>
<param name="msWidth" value="0.2mm"/>
<param name="msDrill" value="0.3mm"/>
<param name="dpMaxLengthDifference" value="10mm"/>
<param name="dpGapFactor" value="2.5"/>
<description language="en">&lt;b&gt;Fusion Electronics Design Rules&lt;/b&gt;
&lt;p&gt;
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.
</description>
<param name="layerSetup" value="(1*16)"/>
<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
<param name="mdViaViaSameLayer" value="6mil"/>
<param name="mnLayersViaInSmd" value="2"/>
<param name="mdSmdStop" value="0mil"/>
<param name="msMicroVia" value="9.99mm"/>
<param name="msBlindViaRatio" value="0.5"/>
<param name="rvPadTop" value="0.25"/>
<param name="rvPadInner" value="0.25"/>
<param name="rvPadBottom" value="0.25"/>
<param name="rvViaOuter" value="0.25"/>
<param name="rvViaInner" value="0.25"/>
<param name="rvMicroViaOuter" value="0.25"/>
<param name="rvMicroViaInner" value="0.25"/>
<param name="rlMinPadTop" value="10mil"/>
<param name="rlMaxPadTop" value="20mil"/>
<param name="rlMinPadInner" value="10mil"/>
<param name="rlMaxPadInner" value="20mil"/>
<param name="rlMinPadBottom" value="10mil"/>
<param name="rlMaxPadBottom" value="20mil"/>
<param name="rlMinViaOuter" value="8mil"/>
<param name="rlMaxViaOuter" value="20mil"/>
<param name="rlMinViaInner" value="8mil"/>
<param name="rlMaxViaInner" value="20mil"/>
<param name="rlMinMicroViaOuter" value="4mil"/>
<param name="rlMaxMicroViaOuter" value="20mil"/>
<param name="rlMinMicroViaInner" value="4mil"/>
<param name="rlMaxMicroViaInner" value="20mil"/>
<param name="psTop" value="-1"/>
<param name="psBottom" value="-1"/>
<param name="psFirst" value="-1"/>
<param name="psElongationLong" value="100"/>
<param name="psElongationOffset" value="100"/>
<param name="mvStopFrame" value="1"/>
<param name="mvCreamFrame" value="0"/>
<param name="mlMinStopFrame" value="4mil"/>
<param name="mlMaxStopFrame" value="4mil"/>
<param name="mlMinCreamFrame" value="0mil"/>
<param name="mlMaxCreamFrame" value="0mil"/>
<param name="mlViaStopLimit" value="9999mil"/>
<param name="srRoundness" value="0"/>
<param name="srMinRoundness" value="0mil"/>
<param name="srMaxRoundness" value="0mil"/>
<param name="slThermalIsolate" value="10mil"/>
<param name="slThermalsForVias" value="0"/>
<param name="checkAngle" value="0"/>
<param name="checkRestrict" value="1"/>
<param name="checkStop" value="0"/>
<param name="checkValues" value="0"/>
<param name="checkNames" value="1"/>
<param name="checkWireStubs" value="1"/>
<param name="checkPolygonWidth" value="0"/>
<param name="useDiameter" value="13"/>
<param name="removeAnnularRing" value="0"/>
<param name="flattenRefDes" value="0"/>
<param name="maxErrors" value="999999"/>
<layerstackup name="Default Layer Stack" type="Standard Stackup" display_unit="mic" roughness_model="0">
 <layerdef type="Signal" id="{0c855fb7-b2bd-4696-a2e6-68c1f1e79c13}" layer="1" name="Top" locally_modified_material="yes">
 <material name="User Defined" thickness="0.035mm" weight="1oz" process="Electro Deposited" source="User"/>
</layerdef>
 <layerdef type="Core" id="{448e5dd7-6050-4abf-b09b-482010adcf36}" layer="1" name="Dielectric-1" locally_modified_material="yes">
 <material name="User Defined" construction="" thickness="1.5mm" resin="50%" dielectric_constant_1g="4.5" dissipation_factor_1g="0.02" glass_transition_temperature="125degC" source="User"/>
</layerdef>
 <layerdef type="Signal" id="{39fd09fa-bd24-4972-acdf-e052184e936c}" layer="16" name="Bottom" locally_modified_material="yes">
 <material name="User Defined" thickness="0.035mm" weight="1oz" process="Electro Deposited" source="User"/>
</layerdef>
 <viadef name="Thru 1:16" startlayer="1" stoplayer="16" complement="no"/>
 </layerstackup>
 </designrules>
<autorouter>
<pass name="Default">
<param name="RoutingGrid" value="50mil"/>
<param name="AutoGrid" value="1"/>
<param name="Efforts" value="0"/>
<param name="TopRouterVariant" value="1"/>
<param name="tpViaShape" value="round"/>
<param name="PrefDir.1" value="a"/>
<param name="PrefDir.2" value="0"/>
<param name="PrefDir.3" value="0"/>
<param name="PrefDir.4" value="0"/>
<param name="PrefDir.5" value="0"/>
<param name="PrefDir.6" value="0"/>
<param name="PrefDir.7" value="0"/>
<param name="PrefDir.8" value="0"/>
<param name="PrefDir.9" value="0"/>
<param name="PrefDir.10" value="0"/>
<param name="PrefDir.11" value="0"/>
<param name="PrefDir.12" value="0"/>
<param name="PrefDir.13" value="0"/>
<param name="PrefDir.14" value="0"/>
<param name="PrefDir.15" value="0"/>
<param name="PrefDir.16" value="a"/>
<param name="cfVia" value="8"/>
<param name="cfNonPref" value="5"/>
<param name="cfChangeDir" value="2"/>
<param name="cfOrthStep" value="2"/>
<param name="cfDiagStep" value="3"/>
<param name="cfExtdStep" value="0"/>
<param name="cfBonusStep" value="1"/>
<param name="cfMalusStep" value="1"/>
<param name="cfPadImpact" value="4"/>
<param name="cfSmdImpact" value="4"/>
<param name="cfBusImpact" value="0"/>
<param name="cfHugging" value="3"/>
<param name="cfAvoid" value="4"/>
<param name="cfPolygon" value="10"/>
<param name="cfBase.1" value="0"/>
<param name="cfBase.2" value="1"/>
<param name="cfBase.3" value="1"/>
<param name="cfBase.4" value="1"/>
<param name="cfBase.5" value="1"/>
<param name="cfBase.6" value="1"/>
<param name="cfBase.7" value="1"/>
<param name="cfBase.8" value="1"/>
<param name="cfBase.9" value="1"/>
<param name="cfBase.10" value="1"/>
<param name="cfBase.11" value="1"/>
<param name="cfBase.12" value="1"/>
<param name="cfBase.13" value="1"/>
<param name="cfBase.14" value="1"/>
<param name="cfBase.15" value="1"/>
<param name="cfBase.16" value="0"/>
<param name="mnVias" value="20"/>
<param name="mnSegments" value="9999"/>
<param name="mnExtdSteps" value="9999"/>
<param name="mnRipupLevel" value="10"/>
<param name="mnRipupSteps" value="100"/>
<param name="mnRipupTotal" value="100"/>
</pass>
<pass name="Follow-me" refer="Default" active="yes">
</pass>
<pass name="Busses" refer="Default" active="yes">
<param name="cfNonPref" value="4"/>
<param name="cfBusImpact" value="4"/>
<param name="cfHugging" value="0"/>
<param name="mnVias" value="0"/>
</pass>
<pass name="Route" refer="Default" active="yes">
</pass>
<pass name="Optimize1" refer="Default" active="yes">
<param name="cfVia" value="99"/>
<param name="cfExtdStep" value="10"/>
<param name="cfHugging" value="1"/>
<param name="mnExtdSteps" value="1"/>
<param name="mnRipupLevel" value="0"/>
</pass>
<pass name="Optimize2" refer="Optimize1" active="yes">
<param name="cfNonPref" value="0"/>
<param name="cfChangeDir" value="6"/>
<param name="cfExtdStep" value="0"/>
<param name="cfBonusStep" value="2"/>
<param name="cfMalusStep" value="2"/>
<param name="cfPadImpact" value="2"/>
<param name="cfSmdImpact" value="2"/>
<param name="cfHugging" value="0"/>
</pass>
<pass name="Optimize3" refer="Optimize2" active="yes">
<param name="cfChangeDir" value="8"/>
<param name="cfPadImpact" value="0"/>
<param name="cfSmdImpact" value="0"/>
</pass>
<pass name="Optimize4" refer="Optimize3" active="yes">
<param name="cfChangeDir" value="25"/>
</pass>
</autorouter>
<elements>
<element name="J1" library="FusionCrossbarFixture" package="J1" value="CROSSBAR_TEST" x="0" y="0" smashed="yes">
</element>
<element name="J2" library="FusionCrossbarFixture" package="J2" value="CROSSBAR_TEST" x="0" y="0" smashed="yes">
</element>
<element name="J3" library="FusionCrossbarFixture" package="J3" value="CROSSBAR_TEST" x="0" y="0" smashed="yes">
<pad name="1">
</pad>
<pad name="8">
</pad>
<pad name="15">
</pad>
<pad name="22">
</pad>
<pad name="5">
</pad>
<pad name="12">
</pad>
<pad name="19">
</pad>
<pad name="2">
</pad>
<pad name="9">
</pad>
<pad name="16">
</pad>
<pad name="23">
</pad>
<pad name="6">
</pad>
<pad name="13">
</pad>
<pad name="20">
</pad>
<pad name="3">
</pad>
<pad name="10">
</pad>
<pad name="17">
</pad>
<pad name="24">
</pad>
<pad name="7">
</pad>
<pad name="14">
</pad>
<pad name="21">
</pad>
<pad name="4">
</pad>
<pad name="11">
</pad>
<pad name="18">
</pad>
</element>
</elements>
<signals>
<signal name="CH_01">
<contactref element="J1" pad="1"/>
<contactref element="J2" pad="1"/>
<contactref element="J3" pad="1"/>
<wire x1="45" y1="52" x2="55" y2="52" width="0.3" layer="1"/>
<wire x1="55" y1="52" x2="65" y2="52" width="0.3" layer="1"/>
<via x="65" y="52" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="65" y1="52" x2="65" y2="42" width="0.3" layer="16"/>
<via x="65" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="65" y1="42" x2="65" y2="35" width="0.3" layer="1"/>
<wire x1="65" y1="52" x2="65" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_02">
<contactref element="J1" pad="2"/>
<contactref element="J2" pad="8"/>
<contactref element="J3" pad="8"/>
<wire x1="45" y1="54.54" x2="55" y2="54.54" width="0.3" layer="1"/>
<wire x1="55" y1="54.54" x2="82.78" y2="54.54" width="0.3" layer="1"/>
<via x="82.78" y="54.54" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="82.78" y1="54.54" x2="82.78" y2="42" width="0.3" layer="16"/>
<via x="82.78" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="82.78" y1="42" x2="82.78" y2="35" width="0.3" layer="1"/>
<wire x1="82.78" y1="54.54" x2="82.78" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_03">
<contactref element="J1" pad="3"/>
<contactref element="J2" pad="15"/>
<contactref element="J3" pad="15"/>
<wire x1="45" y1="57.08" x2="55" y2="57.08" width="0.3" layer="1"/>
<wire x1="55" y1="57.08" x2="100.56" y2="57.08" width="0.3" layer="1"/>
<via x="100.56" y="57.08" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="100.56" y1="57.08" x2="100.56" y2="42" width="0.3" layer="16"/>
<via x="100.56" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="100.56" y1="42" x2="100.56" y2="35" width="0.3" layer="1"/>
<wire x1="100.56" y1="57.08" x2="100.56" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_04">
<contactref element="J1" pad="4"/>
<contactref element="J2" pad="22"/>
<contactref element="J3" pad="22"/>
<wire x1="45" y1="59.62" x2="55" y2="59.62" width="0.3" layer="1"/>
<wire x1="55" y1="59.62" x2="118.34" y2="59.62" width="0.3" layer="1"/>
<via x="118.34" y="59.62" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="118.34" y1="59.62" x2="118.34" y2="42" width="0.3" layer="16"/>
<via x="118.34" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="118.34" y1="42" x2="118.34" y2="35" width="0.3" layer="1"/>
<wire x1="118.34" y1="59.62" x2="118.34" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_05">
<contactref element="J1" pad="5"/>
<contactref element="J2" pad="5"/>
<contactref element="J3" pad="5"/>
<wire x1="45" y1="62.16" x2="55" y2="62.16" width="0.3" layer="1"/>
<wire x1="55" y1="62.16" x2="75.16" y2="62.16" width="0.3" layer="1"/>
<via x="75.16" y="62.16" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="75.16" y1="62.16" x2="75.16" y2="42" width="0.3" layer="16"/>
<via x="75.16" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="75.16" y1="42" x2="75.16" y2="35" width="0.3" layer="1"/>
<wire x1="75.16" y1="62.16" x2="75.16" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_06">
<contactref element="J1" pad="6"/>
<contactref element="J2" pad="12"/>
<contactref element="J3" pad="12"/>
<wire x1="45" y1="64.7" x2="55" y2="64.7" width="0.3" layer="1"/>
<wire x1="55" y1="64.7" x2="92.94" y2="64.7" width="0.3" layer="1"/>
<via x="92.94" y="64.7" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="92.94" y1="64.7" x2="92.94" y2="42" width="0.3" layer="16"/>
<via x="92.94" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="92.94" y1="42" x2="92.94" y2="35" width="0.3" layer="1"/>
<wire x1="92.94" y1="64.7" x2="92.94" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_07">
<contactref element="J1" pad="7"/>
<contactref element="J2" pad="19"/>
<contactref element="J3" pad="19"/>
<wire x1="45" y1="67.24" x2="55" y2="67.24" width="0.3" layer="1"/>
<wire x1="55" y1="67.24" x2="110.72" y2="67.24" width="0.3" layer="1"/>
<via x="110.72" y="67.24" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="110.72" y1="67.24" x2="110.72" y2="42" width="0.3" layer="16"/>
<via x="110.72" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="110.72" y1="42" x2="110.72" y2="35" width="0.3" layer="1"/>
<wire x1="110.72" y1="67.24" x2="110.72" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_08">
<contactref element="J1" pad="8"/>
<contactref element="J2" pad="2"/>
<contactref element="J3" pad="2"/>
<wire x1="45" y1="69.78" x2="55" y2="69.78" width="0.3" layer="1"/>
<wire x1="55" y1="69.78" x2="67.54" y2="69.78" width="0.3" layer="1"/>
<via x="67.54" y="69.78" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="67.54" y1="69.78" x2="67.54" y2="42" width="0.3" layer="16"/>
<via x="67.54" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="67.54" y1="42" x2="67.54" y2="35" width="0.3" layer="1"/>
<wire x1="67.54" y1="69.78" x2="67.54" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_09">
<contactref element="J1" pad="9"/>
<contactref element="J2" pad="9"/>
<contactref element="J3" pad="9"/>
<wire x1="45" y1="72.32" x2="55" y2="72.32" width="0.3" layer="1"/>
<wire x1="55" y1="72.32" x2="85.32" y2="72.32" width="0.3" layer="1"/>
<via x="85.32" y="72.32" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="85.32" y1="72.32" x2="85.32" y2="42" width="0.3" layer="16"/>
<via x="85.32" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="85.32" y1="42" x2="85.32" y2="35" width="0.3" layer="1"/>
<wire x1="85.32" y1="72.32" x2="85.32" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_10">
<contactref element="J1" pad="10"/>
<contactref element="J2" pad="16"/>
<contactref element="J3" pad="16"/>
<wire x1="45" y1="74.86" x2="55" y2="74.86" width="0.3" layer="1"/>
<wire x1="55" y1="74.86" x2="103.1" y2="74.86" width="0.3" layer="1"/>
<via x="103.1" y="74.86" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="103.1" y1="74.86" x2="103.1" y2="42" width="0.3" layer="16"/>
<via x="103.1" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="103.1" y1="42" x2="103.1" y2="35" width="0.3" layer="1"/>
<wire x1="103.1" y1="74.86" x2="103.1" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_11">
<contactref element="J1" pad="11"/>
<contactref element="J2" pad="23"/>
<contactref element="J3" pad="23"/>
<wire x1="45" y1="77.4" x2="55" y2="77.4" width="0.3" layer="1"/>
<wire x1="55" y1="77.4" x2="120.88" y2="77.4" width="0.3" layer="1"/>
<via x="120.88" y="77.4" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="120.88" y1="77.4" x2="120.88" y2="42" width="0.3" layer="16"/>
<via x="120.88" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="120.88" y1="42" x2="120.88" y2="35" width="0.3" layer="1"/>
<wire x1="120.88" y1="77.4" x2="120.88" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_12">
<contactref element="J1" pad="12"/>
<contactref element="J2" pad="6"/>
<contactref element="J3" pad="6"/>
<wire x1="45" y1="79.94" x2="55" y2="79.94" width="0.3" layer="1"/>
<wire x1="55" y1="79.94" x2="77.7" y2="79.94" width="0.3" layer="1"/>
<via x="77.7" y="79.94" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="77.7" y1="79.94" x2="77.7" y2="42" width="0.3" layer="16"/>
<via x="77.7" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="77.7" y1="42" x2="77.7" y2="35" width="0.3" layer="1"/>
<wire x1="77.7" y1="79.94" x2="77.7" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_13">
<contactref element="J1" pad="13"/>
<contactref element="J2" pad="13"/>
<contactref element="J3" pad="13"/>
<wire x1="45" y1="82.48" x2="55" y2="82.48" width="0.3" layer="1"/>
<wire x1="55" y1="82.48" x2="95.48" y2="82.48" width="0.3" layer="1"/>
<via x="95.48" y="82.48" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="95.48" y1="82.48" x2="95.48" y2="42" width="0.3" layer="16"/>
<via x="95.48" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="95.48" y1="42" x2="95.48" y2="35" width="0.3" layer="1"/>
<wire x1="95.48" y1="82.48" x2="95.48" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_14">
<contactref element="J1" pad="14"/>
<contactref element="J2" pad="20"/>
<contactref element="J3" pad="20"/>
<wire x1="45" y1="85.02" x2="55" y2="85.02" width="0.3" layer="1"/>
<wire x1="55" y1="85.02" x2="113.26" y2="85.02" width="0.3" layer="1"/>
<via x="113.26" y="85.02" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="113.26" y1="85.02" x2="113.26" y2="42" width="0.3" layer="16"/>
<via x="113.26" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="113.26" y1="42" x2="113.26" y2="35" width="0.3" layer="1"/>
<wire x1="113.26" y1="85.02" x2="113.26" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_15">
<contactref element="J1" pad="15"/>
<contactref element="J2" pad="3"/>
<contactref element="J3" pad="3"/>
<wire x1="45" y1="87.56" x2="55" y2="87.56" width="0.3" layer="1"/>
<wire x1="55" y1="87.56" x2="70.08" y2="87.56" width="0.3" layer="1"/>
<via x="70.08" y="87.56" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="70.08" y1="87.56" x2="70.08" y2="42" width="0.3" layer="16"/>
<via x="70.08" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="70.08" y1="42" x2="70.08" y2="35" width="0.3" layer="1"/>
<wire x1="70.08" y1="87.56" x2="70.08" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_16">
<contactref element="J1" pad="16"/>
<contactref element="J2" pad="10"/>
<contactref element="J3" pad="10"/>
<wire x1="45" y1="90.1" x2="55" y2="90.1" width="0.3" layer="1"/>
<wire x1="55" y1="90.1" x2="87.86" y2="90.1" width="0.3" layer="1"/>
<via x="87.86" y="90.1" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="87.86" y1="90.1" x2="87.86" y2="42" width="0.3" layer="16"/>
<via x="87.86" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="87.86" y1="42" x2="87.86" y2="35" width="0.3" layer="1"/>
<wire x1="87.86" y1="90.1" x2="87.86" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_17">
<contactref element="J1" pad="17"/>
<contactref element="J2" pad="17"/>
<contactref element="J3" pad="17"/>
<wire x1="45" y1="92.64" x2="55" y2="92.64" width="0.3" layer="1"/>
<wire x1="55" y1="92.64" x2="105.64" y2="92.64" width="0.3" layer="1"/>
<via x="105.64" y="92.64" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="105.64" y1="92.64" x2="105.64" y2="42" width="0.3" layer="16"/>
<via x="105.64" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="105.64" y1="42" x2="105.64" y2="35" width="0.3" layer="1"/>
<wire x1="105.64" y1="92.64" x2="105.64" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_18">
<contactref element="J1" pad="18"/>
<contactref element="J2" pad="24"/>
<contactref element="J3" pad="24"/>
<wire x1="45" y1="95.18" x2="55" y2="95.18" width="0.3" layer="1"/>
<wire x1="55" y1="95.18" x2="123.42" y2="95.18" width="0.3" layer="1"/>
<via x="123.42" y="95.18" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="123.42" y1="95.18" x2="123.42" y2="42" width="0.3" layer="16"/>
<via x="123.42" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="123.42" y1="42" x2="123.42" y2="35" width="0.3" layer="1"/>
<wire x1="123.42" y1="95.18" x2="123.42" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_19">
<contactref element="J1" pad="19"/>
<contactref element="J2" pad="7"/>
<contactref element="J3" pad="7"/>
<wire x1="45" y1="97.72" x2="55" y2="97.72" width="0.3" layer="1"/>
<wire x1="55" y1="97.72" x2="80.24" y2="97.72" width="0.3" layer="1"/>
<via x="80.24" y="97.72" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="80.24" y1="97.72" x2="80.24" y2="42" width="0.3" layer="16"/>
<via x="80.24" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="80.24" y1="42" x2="80.24" y2="35" width="0.3" layer="1"/>
<wire x1="80.24" y1="97.72" x2="80.24" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_20">
<contactref element="J1" pad="20"/>
<contactref element="J2" pad="14"/>
<contactref element="J3" pad="14"/>
<wire x1="45" y1="100.26" x2="55" y2="100.26" width="0.3" layer="1"/>
<wire x1="55" y1="100.26" x2="98.02" y2="100.26" width="0.3" layer="1"/>
<via x="98.02" y="100.26" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="98.02" y1="100.26" x2="98.02" y2="42" width="0.3" layer="16"/>
<via x="98.02" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="98.02" y1="42" x2="98.02" y2="35" width="0.3" layer="1"/>
<wire x1="98.02" y1="100.26" x2="98.02" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_21">
<contactref element="J1" pad="21"/>
<contactref element="J2" pad="21"/>
<contactref element="J3" pad="21"/>
<wire x1="45" y1="102.8" x2="55" y2="102.8" width="0.3" layer="1"/>
<wire x1="55" y1="102.8" x2="115.8" y2="102.8" width="0.3" layer="1"/>
<via x="115.8" y="102.8" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="115.8" y1="102.8" x2="115.8" y2="42" width="0.3" layer="16"/>
<via x="115.8" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="115.8" y1="42" x2="115.8" y2="35" width="0.3" layer="1"/>
<wire x1="115.8" y1="102.8" x2="115.8" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_22">
<contactref element="J1" pad="22"/>
<contactref element="J2" pad="4"/>
<contactref element="J3" pad="4"/>
<wire x1="45" y1="105.34" x2="55" y2="105.34" width="0.3" layer="1"/>
<wire x1="55" y1="105.34" x2="72.62" y2="105.34" width="0.3" layer="1"/>
<via x="72.62" y="105.34" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="72.62" y1="105.34" x2="72.62" y2="42" width="0.3" layer="16"/>
<via x="72.62" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="72.62" y1="42" x2="72.62" y2="35" width="0.3" layer="1"/>
<wire x1="72.62" y1="105.34" x2="72.62" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_23">
<contactref element="J1" pad="23"/>
<contactref element="J2" pad="11"/>
<contactref element="J3" pad="11"/>
<wire x1="45" y1="107.88" x2="55" y2="107.88" width="0.3" layer="1"/>
<wire x1="55" y1="107.88" x2="90.4" y2="107.88" width="0.3" layer="1"/>
<via x="90.4" y="107.88" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="90.4" y1="107.88" x2="90.4" y2="42" width="0.3" layer="16"/>
<via x="90.4" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="90.4" y1="42" x2="90.4" y2="35" width="0.3" layer="1"/>
<wire x1="90.4" y1="107.88" x2="90.4" y2="125" width="0.3" layer="16"/>
</signal>
<signal name="CH_24">
<contactref element="J1" pad="24"/>
<contactref element="J2" pad="18"/>
<contactref element="J3" pad="18"/>
<wire x1="45" y1="110.42" x2="55" y2="110.42" width="0.3" layer="1"/>
<wire x1="55" y1="110.42" x2="108.18" y2="110.42" width="0.3" layer="1"/>
<via x="108.18" y="110.42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="108.18" y1="110.42" x2="108.18" y2="42" width="0.3" layer="16"/>
<via x="108.18" y="42" extent="1-16" drill="0.3" diameter="0.6" solderMask="auto">
</via>
<wire x1="108.18" y1="42" x2="108.18" y2="35" width="0.3" layer="1"/>
<wire x1="108.18" y1="110.42" x2="108.18" y2="125" width="0.3" layer="16"/>
</signal>
</signals>
<mfgpreviewcolors>
<mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>
<mfgpreviewcolor name="silkscreencolor" color="0xFFFEFEFE"/>
<mfgpreviewcolor name="backgroundcolor" color="0xFF282828"/>
<mfgpreviewcolor name="coppercolor" color="0xFFFFBF00"/>
<mfgpreviewcolor name="substratecolor" color="0xFF786E46"/>
</mfgpreviewcolors>
</board>
</drawing>
<compatibility>
<note version="9.7" severity="warning">
Since Fusion, design files support named views saved in design. 
Named views found in the design will not be understood with this version. 
</note>
<note version="9.7" minversion="9.7.0" severity="warning">
Since Version 9.7.0 new layer stackup definition has been added,
which will not be loaded with this version.
</note>
<note version="9.7" minversion="9.7.0" severity="warning">
Since Version 9.7.0 new active CAMJOB file name has been added,
which will not be loaded with this version.
</note>
<note version="9.7" minversion="9.7.0" severity="warning">
Since Version 9.7.0 board construction lines has been added,
which will not be loaded with this version.
</note>
<note version="9.7" minversion="9.7.0" severity="warning">
Since Version 9.7.0 new design rule definitions have been added,
which will not be loaded with this version.
</note>
</compatibility>
</eagle>