component
FU6861N
Public Made by Adomby adom
Fortior Tech Motor Driver ICs, QFN-40-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFU6861N
Fortior Tech · Motor Driver ICs · QFN-40-EP(5x5)
FU6861N from Fortior Tech, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSU | power_in | 6N Predriver U-phase input, used as the ground reference for the U-phase high-side bootstrap. |
| 2 | HU | output | 6N Predriver U-phase high-side PWM output. |
| 3 | VBU | power_in | 6N Predriver U-phase high-side bootstrap supply. |
| 4 | VSV | power_in | 6N Predriver V-phase input, used as the ground reference for the V-phase high-side bootstrap. |
| 5 | HV | output | 6N Predriver V-phase high-side PWM output. |
| 6 | VBV | power_in | 6N Predriver V-phase high-side bootstrap supply. |
| 7 | VSW | power_in | 6N Predriver W-phase input, used as the ground reference for the W-phase high-side bootstrap. |
| 8 | HW | output | 6N Predriver W-phase high-side PWM output. |
| 9 | VBW | power_in | 6N Predriver W-phase high-side bootstrap supply. |
| 10 | VCC | power_in | Power input whose voltage range depends on VCC_MODE; an external filter capacitor of 10uF or larger is required. |
| 11 | VSS | power_in | Digital ground. |
| 12 | VDD5 | power_out | Medium-voltage supply input or internal 5V LDO output, with an external 1 to 4.7uF capacitor; 3 to 5.5V when VCC_MODE=1. |
| 13 | RSTN/FICEK | input | External reset input with internal pull-up and Schmitt trigger input; also the FICE debug interface clock. |
| 14 | VDD18 | power_out | 1.8V LDO output, requiring an external 1 to 4.7uF capacitor. |
| 15 | P1.2/FICED | bidirectional | GPIO P1.2 with external interrupt 1 input capability; also the FICE debug data port. |
| 16 | P1.3/HBIAS/P1.4/CMP0P/AD10/HALL0S | bidirectional | Multiplexed pin: GPIO P1.3 (HALL bias supply switched internally to VDD5), with P1.4 (BEMF0 positive input, ADC channel 10, alternate HALL0 logic input) on the same label. |
| 17 | P1.6/CMP1P/AD9/HALL1S | bidirectional | GPIO P1.6 with external interrupt 1 input and configurable 5K pull-up; also BEMF1 positive input, ADC channel 9, and alternate HALL1 logic input. |
| 18 | P2.0/AD0 | bidirectional | GPIO P2.0 with external interrupt 1 input; ADC channel 0 input used to sample the phase current 1 amplified signal. |
| 19 | P2.1/CMP2P/AD8/HALL2S | bidirectional | GPIO P2.1 with external interrupt 1 input and configurable 5K pull-up; also BEMF2 positive input, ADC channel 8, and alternate HALL2 logic input. |
| 20 | P2.3/AD1/CMP4P | bidirectional | GPIO P2.3 with external interrupt 1 input; ADC channel 1 input used to sample the phase current 2 amplified signal, and comparator 4 positive input. |
| 21 | P2.4/AD2 | bidirectional | GPIO P2.4 with external interrupt 1 input; ADC channel 2 input for the bus voltage signal. |
| 22 | P2.6/CMP3M/DA0/AD11 | bidirectional | GPIO P2.6 with external interrupt 1 input; overcurrent reference input and comparator 3 negative input, internal DAC unbuffered output, and ADC channel 11 input. |
| 23 | P2.7/AD4/CMP3P/AMP0O/CMP4M | bidirectional | GPIO P2.7 with external interrupt 1 input; ADC channel 4 input for the amplified bus current, comparator 3 positive input for overcurrent detection, AMP0 output, and comparator 4 negative input. |
| 24 | P3.0/AMP0M | bidirectional | GPIO P3.0; negative input of op-amp 0 used to amplify the bus current signal. |
| 25 | P3.1/AMP0P | bidirectional | GPIO P3.1; positive input of op-amp 0 used to amplify the bus current signal. |
| 26 | P3.2/AD5/VHALF | bidirectional | GPIO P3.2; over-temperature signal input and ADC channel 5 input, also a 1/2 VDD5 or 1/2 VREF reference output requiring an external 1uF capacitor. |
| 27 | P3.5/VREF | bidirectional | GPIO P3.5; ADC external reference voltage input or internal VREF output, requiring an external 1 to 4.7uF capacitor. |
| 28 | VSS | power_in | Ground. |
| 29 | IOVCC | power_in | GPIO supply input of 3 to 5.5V, with a 1 to 10uF capacitor to ground, and IOVCC must not exceed VDD5. |
| 30 | P0.0/SDA | bidirectional | GPIO P0.0 with external interrupt 0 input; I2C SDA open-drain output with configurable 5K pull-up. |
| 31 | P0.1/TIM4/SCL | bidirectional | GPIO P0.1; Timer4 capture input or output, and I2C SCL clock open-drain output with configurable 5K pull-up. |
| 32 | P0.4/NSS | bidirectional | GPIO P0.4; SPI slave select port. |
| 33 | P0.5/TXD/MOSI | bidirectional | GPIO P0.5; UART1 transmit output (before function transfer) and SPI MOSI, output in master mode or input in slave mode. |
| 34 | P0.6/RXD/SCLK | bidirectional | GPIO P0.6; UART1 receive input (before function transfer) and SPI clock SCLK. |
| 35 | P0.7/MISO/CMPXO/TIM2S/P1.1/TIM3 | bidirectional | GPIO P0.7; SPI MISO, comparator output test pin, Timer2 alternate capture or PWM output, and GPIO P1.1 with external interrupt 1 input and Timer3 capture input. |
| 36 | VDRV | power_in | 6N Predriver supply of 7 to 18V, with an external 1 to 10uF capacitor. |
| 37 | VSS | power_in | Digital ground. |
| 38 | LU | output | 6N Predriver U-phase low-side PWM output. |
| 39 | LV | output | 6N Predriver V-phase low-side PWM output. |
| 40 | LW | output | 6N Predriver W-phase low-side PWM output. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | QFN-40-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature | TA | -40 | 85 | ℃ | 60 | ||
| Operating ambient temperature | TA | -40 | 105 | ℃ | VCC≤12V, Ivcc≤30mA | 60 | |
| Operating junction temperature | TJ | -40 | 150 | ℃ | 60 | ||
| Storage temperature | -65 | 150 | ℃ | 60 | |||
| Voltage VCC relative to VSS | VCC | -0.3 | 36 | V | 60 | ||
| Voltage VDD5/IOVCC relative to VSS | VDD5/IOVCC | -0.3 | 5 | 6.5 | V | 60 | |
| Voltage VDRV relative to VSS | VDRV | -0.3 | 22 | V | FU6861 only | 60 | |
| Floating voltage VBU, VBV, VBW | VBU, VBV, VBW | -0.3 | 180 | V | FU6861 only | 60 | |
| Voltage VDD18 | VDD18 | -0.3 | 1.85 | 2 | V | 60 | |
| Voltage RSTN, VCC_MODE, GPIO relative to VSS | -0.3 | V | max is VDD5+0.3 | 60 | |||
| VCC operating voltage, single supply high-voltage mode | VCC | 5 | 24 | V | 单电源高压模式, VCC_MODE=0 | 61 | |
| VCC operating voltage, dual supply high-voltage mode | VCC | 5 | 36 | V | 双电源高压模式, VCC_MODE=1, VCC≥VDD5, (2) | 61 | |
| VDD5 operating voltage | VDD5 | 3 | 5.5 | V | VCC_MODE=1,VCC 与 VDD5 连接, (2) | 61 | |
| IOVCC operating voltage | IOVCC | 3 | V | max is VDD5+0.3 | 61 | ||
| VDRV operating voltage | VDRV | 7 | 18 | V | FU6861 | 61 | |
| Floating voltage VBU, VBV, VBW | VBU, VBV, VBW | 180 | V | FU6861 | 61 | ||
| Voltage VBU to VSU, VBV to VSV, VBW to VSW | VBU-VSU | 18 | V | FU6861 | 61 | ||
| GPIO output low voltage | VOL | 0.7 | V | IOL=8mA,IOVCC=VDD5=5V | 62 | ||
| Common-mode input range | VICMR | 0 | V | max is VDD5-1.5 | 63 | ||
| Op-amp unity gain bandwidth | UGBW | 6 | 10 | MHz | CL=40pF | 64 | |
| Op-amp slew rate | SR | 10 | 15 | V/uS | CL=40pF | 64 | |
| BEMF internal resistance | 5.4 | 6.8 | 8.2 | kΩ | 64 | ||
| Internal fast clock frequency | 23.5 | 24 | 24.5 | MHz | TA = -40℃~85℃, VCC = 5V~24V, VCC_MODE=0 | 64 | |
| WDT clock frequency | 29 | 32.8 | 37 | kHz | TA = -40℃~85℃, VCC = 5V~24V, VCC_MODE=0 | 64 | |
| Reset low minimum pulse width | 25 | 50 | uS | 64 | |||
| VDD5 voltage | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V~30V, VCC_MODE=0 | 64 |
| ADC sampling time | 3 | 63 | ADCLK count | 63 | |||
| Predriver output rise time | 15 | 30 | nS | 1nF Load, 从 10%上升至 90%时间 | 62 | ||
| Predriver output fall time | 15 | 30 | nS | 1nF Load, 从 90%下降至 10%时间 | 63 | ||
| GPIO output rise time | 15 | nS | 50pF Load,从 10%上升至 90%时间, TA=25℃ | 62 | |||
| GPIO output fall time | 13 | nS | 50pF Load,从 90%下降至 10%时间, TA=25℃ | 62 | |||
| Pull-up resistance, GPIO other than P0[2:0], P1[6:3], P2[1], P3[7:6] | 33 | kΩ | Vin=0V | 62 | |||
| Pull-up resistance, P0[2:0], P1[6:3], P2[1], P3[7:6] | 5 | kΩ | Vin=0V | 62 | |||
| System clock | 24 | MHz | 61 | ||||
| IVCC operating current | IVCC | 24 | mA | 61 | |||
| IVCC standby current | IVCC | 6 | mA | 61 | |||
| IVCC sleep current | IVCC | 350 | 650 | uA | VCC_MODE=0 | 61 | |
| IVCC sleep current | IVCC | 300 | 500 | uA | VCC_MODE=1,VCC=VDD5=5V | 61 | |
| Predriver high-level peak output current | 0.8 | A | 62 | ||||
| Predriver low-level peak output current | 0.8 | A | 62 | ||||
| VREF | VREF | 4.5 | V | VREFVSEL=00B | 63 | ||
| VREF | VREF | 4 | V | VREFVSEL=11B | 63 | ||
| VREF | VREF | 3 | V | VREFVSEL=10B | 63 | ||
| Op-amp input offset voltage | VOS | 5 | mV | 63 | |||
| Op-amp open-loop gain | AOL | 80 | dB | RL=100kΩ | 64 | ||
| BEMF internal resistor relative accuracy | 1 | % | 64 | ||||
| LDO VDD18 voltage | VDD18 | 1.85 | V | 64 | |||
| ADC INL | INL | 2 | LSB | 63 | |||
| ADC DNL | DNL | 1.5 | LSB | 63 | |||
| ADC offset | OFFSET | 10 | LSB | 63 | |||
| ADC input resistance | RIN | 500 | Ω | 输入电阻 | 63 | ||
| ADC input capacitance | CIN | 30 | pF | 输入电容 | 63 | ||
| ADC conversion time | 0.6 | uS | 63 | ||||
| Junction-to-ambient thermal resistance | ƟJA | 40 | ℃/W | JEDEC 2S2P PCB | 65 | ||
| Junction-to-ambient thermal resistance | ƟJA | 66 | ℃/W | JEDEC 1S0P PCB | 65 | ||
| Junction-to-case thermal resistance | ƟJC | 12 | ℃/W | JEDEC 2S2P PCB | 65 |
CAD (KiCad official)
- Symbol:
FU6861N - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
fu6861n-etched.step/fu6861n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6861n.step/fu6861n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (289 pp, sha256
d5f447c6f6bd72fd, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).