component
FU6818Q
Public Made by Adomby adom
Fortior Tech Motor Driver ICs, QFN-56(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
fffbfcf
FU6818Q
Fortior Tech · Motor Driver ICs · QFN-56(7x7)
FU6818Q from Fortior Tech, in a QFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSU | passive | 6N Predriver U-phase input, used as the ground reference for the high-side U-phase bootstrap. |
| 2 | HU | output | 6N Predriver high-side U-phase PWM output. |
| 3 | VBU | power_in | 6N Predriver high-side U-phase bootstrap supply. |
| 4 | VSV | passive | 6N Predriver V-phase input, used as the ground reference for the high-side V-phase bootstrap. |
| 5 | HV | output | 6N Predriver high-side V-phase PWM output. |
| 6 | VBV | power_in | 6N Predriver high-side V-phase bootstrap supply. |
| 7 | VSW | passive | 6N Predriver W-phase input, used as the ground reference for the high-side W-phase bootstrap. |
| 8 | HW | output | 6N Predriver high-side W-phase PWM output. |
| 9 | VBW | power_in | 6N Predriver high-side W-phase bootstrap supply. |
| 10 | VCC | power_in | Power input with a 10uF or larger filter capacitor; mode 1 (VCC_MODE=0) takes 5V |
| 11 | VSS | power_in | Digital ground. |
| 12 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE, with a 1uF~4.7uF capacitor. |
| 13 | VCC_MODE | input | Input power-mode control; see the VCC pin description for the modes. |
| 14 | RSTN/FICEK | input | External reset input with internal pull-up, also the FICE debug interface clock. |
| 15 | VDD18 | power_out | 1.85V LDO output supply with a 1uF~4.7uF capacitor. |
| 16 | VSS | power_in | Digital ground. |
| 17 | P1.2/FICED | bidirectional | GPIO configurable as external interrupt INT1 input, also the FICE data port. |
| 18 | P1.3/HBIAS/A3O | bidirectional | GPIO, Hall bias supply switched internally from VDD5 for high current output, and AMP3 output. |
| 19 | P1.4/C0P/A3M | bidirectional | GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall0 input, differential Hall0/BEMF0 positive input, and AMP3 negative input. |
| 20 | P1.5/C0M/A3P | bidirectional | GPIO with INT1 and optional 4.7K pull-up, differential Hall0/BEMF0 negative input, and AMP3 positive input. |
| 21 | P1.6/C1P/A1P | bidirectional | GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall1 input, differential Hall1/BEMF1 positive input, and AMP1 positive input for the phase-1 current signal. |
| 22 | P1.7/C1M/A1M | bidirectional | GPIO with optional 4.7K pull-up, differential Hall1/BEMF1 negative input, and AMP1 negative input. |
| 23 | P2.0/AD0/A1O | bidirectional | GPIO with INT1, ADC channel 0 input for the amplified phase-1 current, and AMP1 output. |
| 24 | P2.1/C2P/A2P | bidirectional | GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall2 input, differential Hall2/BEMF2 positive input, and AMP2 positive input for the phase-2 current signal. |
| 25 | P2.2/C2M/A2M | bidirectional | GPIO with INT1 and optional 4.7K pull-up, differential Hall2/BEMF2 negative input, and AMP2 negative input. |
| 26 | P2.3/AD1/A2O | bidirectional | GPIO with INT1, ADC channel 1 input for the amplified phase-2 current, and AMP2 output. |
| 27 | P2.4/AD2 | bidirectional | GPIO with INT1 and ADC channel 2 input for the bus voltage signal. |
| 28 | P2.5/AD3 | bidirectional | GPIO with INT1 and ADC channel 3 input. |
| 29 | P2.6/C3M | bidirectional | GPIO with INT1 and overcurrent reference input, the CMP3 negative input. |
| 30 | P2.7/AD4/C3P/A0O | bidirectional | GPIO with INT1, ADC channel 4 input for the amplified bus current, CMP3 positive input for overcurrent detection, and AMP0 output. |
| 31 | P3.0/A0M | bidirectional | GPIO and AMP0 negative input for amplifying the bus current signal. |
| 32 | P3.1/A0P | bidirectional | GPIO and AMP0 positive input for amplifying the bus current signal. |
| 33 | P3.2/AD5/TIM0/VHALF | bidirectional | GPIO, over-temperature signal input on ADC channel 5, Advanced timer channel 4 output, and 1/2 VDD5 or 1/2 VREF reference output with a 1uF capacitor. |
| 34 | P3.3/AD6/RXD2/IR_RXD2 | bidirectional | GPIO, ADC channel 6 input, and UART2 / infrared data receive after function remap. |
| 35 | P3.4/AD7/TXD2/IR_TXD2 | bidirectional | GPIO, analog speed control input on ADC channel 7, and UART2 / infrared data transmit after function remap. |
| 36 | P3.5/VREF | bidirectional | GPIO, ADC external reference voltage input or internal VREF output, with a 1uF capacitor. |
| 37 | AVSS | power_in | Analog ground. |
| 38 | AVDD5 | power_in | Analog supply input, connected externally to VDD5 with a 1uF capacitor to AVSS. |
| 39 | P3.6/XIN/ECLK | bidirectional | GPIO, fast clock crystal input for an external 24MHz crystal, and external fast clock input. |
| 40 | P3.7/XOUT | bidirectional | GPIO and fast clock crystal output for the external 24MHz crystal. |
| 41 | P0.0/SDA | bidirectional | GPIO configurable as external interrupt INT0 input, and I2C SDA open-drain with optional 4.7K pull-up. |
| 42 | P0.1/SCL/TIM4 | bidirectional | GPIO, I2C SCL clock open-drain with optional 4.7K pull-up, and Timer4 input or output. |
| 43 | P0.2/LXIN | bidirectional | GPIO and 32768Hz crystal input. |
| 44 | P0.3/LXOUT | bidirectional | GPIO and 32768Hz crystal output. |
| 45 | P0.4/NSS | bidirectional | GPIO and SPI slave select port. |
| 46 | P0.5/MOSI/TXD/IR_TXD | bidirectional | GPIO, SPI MOSI (master out or slave in), and UART1 / infrared data transmit before function remap. |
| 47 | P0.6/MISO/RXD/IR_RXD | bidirectional | GPIO, SPI MISO (master in or slave out), and UART1 / infrared data receive before function remap. |
| 48 | P0.7/SCLK/TIM5/CXO | bidirectional | GPIO, SPI clock, Timer5 capture input or PWM output, and comparator output test pin. |
| 49 | P1.0/TIM2 | bidirectional | GPIO configurable as INT1 input, and Timer2 capture input or PWM output. |
| 50 | P1.1/TIM3 | bidirectional | GPIO configurable as INT1 input, and Timer3 capture input or PWM output. |
| 51 | VDRV | power_in | 6N Predriver supply input, 7V |
| 52 | VSS | power_in | Digital ground. |
| 53 | NC | unconnected | No connect. |
| 54 | LU | output | 6N Predriver low-side U-phase PWM output. |
| 55 | LV | output | 6N Predriver low-side V-phase PWM output. |
| 56 | LW | output | 6N Predriver low-side W-phase PWM output (datasheet text says V phase, likely a typo). |
| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | QFN-56(7x7) |
| Category | Power Supply Chip |
| Pins | 57 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| TJ工作时结温 | TJ | -40 | 150 | ℃ | 69 | ||
| 储存温度 | -55 | 150 | ℃ | 69 | |||
| VCC 相对 VSS 的电压 | VCC | -0.3 | 36 | V | 69 | ||
| VDD5 相对 VSS 的电压 | VDD5 | -0.3 | 6.5 | V | 69 | ||
| RSTN、VCC_MODE、GPIO 相对 VSS 的电压 | -0.3 | V | 69 | ||||
| VDRV 相对 VSS 的电压 | VDRV | -0.3 | 20 | V | 69 | ||
| 高侧浮动电压 VBU,VBV,VBW | VBU,VBV,VBW | -0.3 | 205 | V | 69 | ||
| 低侧输出电压 VLU,LV,LW | VLU,LV,LW | -0.3 | V | 69 | |||
| VCC 工作电压 单电源高压模式 | VCC | 5 | 24 | V | 单电源高压模式, TA = -40℃ ~ 85℃ | 71 | |
| VCC 工作电压 双电源高压模式 | VCC | 5 | 36 | V | 双电源高压模式, VCC_MODE = 1, VCC ≥ VDD5[2], TA = -40℃ ~ 85℃ | 71 | |
| VDD5 工作电压 | VDD5 | 3 | 5.5 | V | VCC_MODE = 1,VCC 与 VDD5 连接[2] | 71 | |
| VBU,VBV,VBW 相对 VSU,VSV,VSW电压 | VBU,VBV,VBW | 20 | V | 71 | |||
| IVCC睡眠电流 | IVCC | 350 | 650 | μA | VCC_MODE = 0 | 71 | |
| IVCC睡眠电流 | IVCC | 300 | 500 | μA | VCC_MODE = 1,VCC = VDD5 = 5V | 71 | |
| 高侧浮动电压 VBU,BV,BW | VBU,BV,BW | 180 | V | 78 | |||
| VDRV 欠压保护开启电压 | 4.2 | 4.6 | 5 | V | 78 | ||
| VDRV 欠压保护关断电压 | 3.9 | 4.3 | 4.7 | V | 78 | ||
| VDRV 欠压保护迟滞电压 | 0.2 | 0.3 | V | 78 | |||
| 输出上升时间 | 12 | 25 | ns | 1nF 负载, 从 10%上升至 90%时间 | 78 | ||
| 输出下降时间 | 12 | 25 | ns | 1nF 负载, 从 90%下降至 10%时间 | 78 | ||
| VDD5 电压 | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V ~ 24V,VCC_MODE = 0, TA = -40℃~ 85℃ | 82 |
| VREF_CR[VREFVSEL] = 10 | VREF | 4.3 | 4.5 | 4.7 | V | VREF_CR[VREFVSEL] = 10 | 80 |
| VICMR共模输入范围 | VICMR | 0 | V | 80 | |||
| VOS运放的失配电压 | VOS | 5 | 10 | mV | TA = 25℃ | 80 | |
| UGBW 单位增益带宽 | UGBW | 6 | 10 | MHz | CL = 40pF | 80 | |
| SR 运放的摆率 | SR | 10 | 15 | V/μs | CL = 40pF | 80 | |
| BEMF 内置电阻 | 5.4 | 6.8 | 8.2 | KΩ | 81 | ||
| 系统时钟频率 | 23.5 | 24 | 24.5 | MHz | 81 | ||
| 低速时钟频率 | 29 | 32.8 | 37 | KHz | 81 | ||
| RSTN 复位低电平最小宽度 | 25 | 50 | μs | 81 | |||
| ΘJA 芯片结温相对环境温度 | ΘJA | 33 | ℃/W | JEDEC 标准,2S2P PCB | 83 | ||
| ΘJA 芯片结温相对环境温度 | ΘJA | 55 | ℃/W | JEDEC 标准,1S0P PCB | 83 | ||
| ΘJC 芯片结温相对封装表面温度 | ΘJC | 9.2 | ℃/W | JEDEC 标准,1S0P PCB | 83 |
CAD (KiCad official)
- Symbol:
FU6818Q - Footprint:
Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm - 3D model: QFN-56(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6818q-etched.step/fu6818q-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6818q.step/fu6818q.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (292 pp, sha256
d5a21e4e7fe9a48c, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FU6818Q
**Fortior Tech** · Motor Driver ICs · QFN-56(7x7)
FU6818Q from Fortior Tech, in a QFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSU | passive | 6N Predriver U-phase input, used as the ground reference for the high-side U-phase bootstrap. |
| 2 | HU | output | 6N Predriver high-side U-phase PWM output. |
| 3 | VBU | power_in | 6N Predriver high-side U-phase bootstrap supply. |
| 4 | VSV | passive | 6N Predriver V-phase input, used as the ground reference for the high-side V-phase bootstrap. |
| 5 | HV | output | 6N Predriver high-side V-phase PWM output. |
| 6 | VBV | power_in | 6N Predriver high-side V-phase bootstrap supply. |
| 7 | VSW | passive | 6N Predriver W-phase input, used as the ground reference for the high-side W-phase bootstrap. |
| 8 | HW | output | 6N Predriver high-side W-phase PWM output. |
| 9 | VBW | power_in | 6N Predriver high-side W-phase bootstrap supply. |
| 10 | VCC | power_in | Power input with a 10uF or larger filter capacitor; mode 1 (VCC_MODE=0) takes 5V~24V on VCC with VDD5 from the internal LDO, mode 2 (VCC_MODE=1) takes 3V~5.5V on VDD5 with VCC shorted to VDD5. |
| 11 | VSS | power_in | Digital ground. |
| 12 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE, with a 1uF~4.7uF capacitor. |
| 13 | VCC_MODE | input | Input power-mode control; see the VCC pin description for the modes. |
| 14 | RSTN/FICEK | input | External reset input with internal pull-up, also the FICE debug interface clock. |
| 15 | VDD18 | power_out | 1.85V LDO output supply with a 1uF~4.7uF capacitor. |
| 16 | VSS | power_in | Digital ground. |
| 17 | P1.2/FICED | bidirectional | GPIO configurable as external interrupt INT1 input, also the FICE data port. |
| 18 | P1.3/HBIAS/A3O | bidirectional | GPIO, Hall bias supply switched internally from VDD5 for high current output, and AMP3 output. |
| 19 | P1.4/C0P/A3M | bidirectional | GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall0 input, differential Hall0/BEMF0 positive input, and AMP3 negative input. |
| 20 | P1.5/C0M/A3P | bidirectional | GPIO with INT1 and optional 4.7K pull-up, differential Hall0/BEMF0 negative input, and AMP3 positive input. |
| 21 | P1.6/C1P/A1P | bidirectional | GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall1 input, differential Hall1/BEMF1 positive input, and AMP1 positive input for the phase-1 current signal. |
| 22 | P1.7/C1M/A1M | bidirectional | GPIO with optional 4.7K pull-up, differential Hall1/BEMF1 negative input, and AMP1 negative input. |
| 23 | P2.0/AD0/A1O | bidirectional | GPIO with INT1, ADC channel 0 input for the amplified phase-1 current, and AMP1 output. |
| 24 | P2.1/C2P/A2P | bidirectional | GPIO with INT1 and optional 4.7K pull-up usable as Timer1 switch-type Hall2 input, differential Hall2/BEMF2 positive input, and AMP2 positive input for the phase-2 current signal. |
| 25 | P2.2/C2M/A2M | bidirectional | GPIO with INT1 and optional 4.7K pull-up, differential Hall2/BEMF2 negative input, and AMP2 negative input. |
| 26 | P2.3/AD1/A2O | bidirectional | GPIO with INT1, ADC channel 1 input for the amplified phase-2 current, and AMP2 output. |
| 27 | P2.4/AD2 | bidirectional | GPIO with INT1 and ADC channel 2 input for the bus voltage signal. |
| 28 | P2.5/AD3 | bidirectional | GPIO with INT1 and ADC channel 3 input. |
| 29 | P2.6/C3M | bidirectional | GPIO with INT1 and overcurrent reference input, the CMP3 negative input. |
| 30 | P2.7/AD4/C3P/A0O | bidirectional | GPIO with INT1, ADC channel 4 input for the amplified bus current, CMP3 positive input for overcurrent detection, and AMP0 output. |
| 31 | P3.0/A0M | bidirectional | GPIO and AMP0 negative input for amplifying the bus current signal. |
| 32 | P3.1/A0P | bidirectional | GPIO and AMP0 positive input for amplifying the bus current signal. |
| 33 | P3.2/AD5/TIM0/VHALF | bidirectional | GPIO, over-temperature signal input on ADC channel 5, Advanced timer channel 4 output, and 1/2 VDD5 or 1/2 VREF reference output with a 1uF capacitor. |
| 34 | P3.3/AD6/RXD2/IR_RXD2 | bidirectional | GPIO, ADC channel 6 input, and UART2 / infrared data receive after function remap. |
| 35 | P3.4/AD7/TXD2/IR_TXD2 | bidirectional | GPIO, analog speed control input on ADC channel 7, and UART2 / infrared data transmit after function remap. |
| 36 | P3.5/VREF | bidirectional | GPIO, ADC external reference voltage input or internal VREF output, with a 1uF capacitor. |
| 37 | AVSS | power_in | Analog ground. |
| 38 | AVDD5 | power_in | Analog supply input, connected externally to VDD5 with a 1uF capacitor to AVSS. |
| 39 | P3.6/XIN/ECLK | bidirectional | GPIO, fast clock crystal input for an external 24MHz crystal, and external fast clock input. |
| 40 | P3.7/XOUT | bidirectional | GPIO and fast clock crystal output for the external 24MHz crystal. |
| 41 | P0.0/SDA | bidirectional | GPIO configurable as external interrupt INT0 input, and I2C SDA open-drain with optional 4.7K pull-up. |
| 42 | P0.1/SCL/TIM4 | bidirectional | GPIO, I2C SCL clock open-drain with optional 4.7K pull-up, and Timer4 input or output. |
| 43 | P0.2/LXIN | bidirectional | GPIO and 32768Hz crystal input. |
| 44 | P0.3/LXOUT | bidirectional | GPIO and 32768Hz crystal output. |
| 45 | P0.4/NSS | bidirectional | GPIO and SPI slave select port. |
| 46 | P0.5/MOSI/TXD/IR_TXD | bidirectional | GPIO, SPI MOSI (master out or slave in), and UART1 / infrared data transmit before function remap. |
| 47 | P0.6/MISO/RXD/IR_RXD | bidirectional | GPIO, SPI MISO (master in or slave out), and UART1 / infrared data receive before function remap. |
| 48 | P0.7/SCLK/TIM5/CXO | bidirectional | GPIO, SPI clock, Timer5 capture input or PWM output, and comparator output test pin. |
| 49 | P1.0/TIM2 | bidirectional | GPIO configurable as INT1 input, and Timer2 capture input or PWM output. |
| 50 | P1.1/TIM3 | bidirectional | GPIO configurable as INT1 input, and Timer3 capture input or PWM output. |
| 51 | VDRV | power_in | 6N Predriver supply input, 7V~20V, with a 1uF~10uF capacitor. |
| 52 | VSS | power_in | Digital ground. |
| 53 | NC | unconnected | No connect. |
| 54 | LU | output | 6N Predriver low-side U-phase PWM output. |
| 55 | LV | output | 6N Predriver low-side V-phase PWM output. |
| 56 | LW | output | 6N Predriver low-side W-phase PWM output (datasheet text says V phase, likely a typo). |
| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | QFN-56(7x7) |
| Category | Power Supply Chip |
| Pins | 57 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| TJ工作时结温 | TJ | -40 | | 150 | ℃ | | 69 |
| 储存温度 | | -55 | | 150 | ℃ | | 69 |
| VCC 相对 VSS 的电压 | VCC | -0.3 | | 36 | V | | 69 |
| VDD5 相对 VSS 的电压 | VDD5 | -0.3 | | 6.5 | V | | 69 |
| RSTN、VCC_MODE、GPIO 相对 VSS 的电压 | | -0.3 | | | V | | 69 |
| VDRV 相对 VSS 的电压 | VDRV | -0.3 | | 20 | V | | 69 |
| 高侧浮动电压 VBU,VBV,VBW | VBU,VBV,VBW | -0.3 | | 205 | V | | 69 |
| 低侧输出电压 VLU,LV,LW | VLU,LV,LW | -0.3 | | | V | | 69 |
| VCC 工作电压 单电源高压模式 | VCC | 5 | | 24 | V | 单电源高压模式, TA = -40℃ ~ 85℃ | 71 |
| VCC 工作电压 双电源高压模式 | VCC | 5 | | 36 | V | 双电源高压模式, VCC_MODE = 1, VCC ≥ VDD5[2], TA = -40℃ ~ 85℃ | 71 |
| VDD5 工作电压 | VDD5 | 3 | | 5.5 | V | VCC_MODE = 1,VCC 与 VDD5 连接[2] | 71 |
| VBU,VBV,VBW 相对 VSU,VSV,VSW电压 | VBU,VBV,VBW | | | 20 | V | | 71 |
| IVCC睡眠电流 | IVCC | | 350 | 650 | μA | VCC_MODE = 0 | 71 |
| IVCC睡眠电流 | IVCC | | 300 | 500 | μA | VCC_MODE = 1,VCC = VDD5 = 5V | 71 |
| 高侧浮动电压 VBU,BV,BW | VBU,BV,BW | | | 180 | V | | 78 |
| VDRV 欠压保护开启电压 | | 4.2 | 4.6 | 5 | V | | 78 |
| VDRV 欠压保护关断电压 | | 3.9 | 4.3 | 4.7 | V | | 78 |
| VDRV 欠压保护迟滞电压 | | 0.2 | 0.3 | | V | | 78 |
| 输出上升时间 | | | 12 | 25 | ns | 1nF 负载, 从 10%上升至 90%时间 | 78 |
| 输出下降时间 | | | 12 | 25 | ns | 1nF 负载, 从 90%下降至 10%时间 | 78 |
| VDD5 电压 | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V ~ 24V,VCC_MODE = 0, TA = -40℃~ 85℃ | 82 |
| VREF_CR[VREFVSEL] = 10 | VREF | 4.3 | 4.5 | 4.7 | V | VREF_CR[VREFVSEL] = 10 | 80 |
| VICMR共模输入范围 | VICMR | 0 | | | V | | 80 |
| VOS运放的失配电压 | VOS | | 5 | 10 | mV | TA = 25℃ | 80 |
| UGBW 单位增益带宽 | UGBW | 6 | 10 | | MHz | CL = 40pF | 80 |
| SR 运放的摆率 | SR | 10 | 15 | | V/μs | CL = 40pF | 80 |
| BEMF 内置电阻 | | 5.4 | 6.8 | 8.2 | KΩ | | 81 |
| 系统时钟频率 | | 23.5 | 24 | 24.5 | MHz | | 81 |
| 低速时钟频率 | | 29 | 32.8 | 37 | KHz | | 81 |
| RSTN 复位低电平最小宽度 | | | 25 | 50 | μs | | 81 |
| ΘJA 芯片结温相对环境温度 | ΘJA | | 33 | | ℃/W | JEDEC 标准,2S2P PCB | 83 |
| ΘJA 芯片结温相对环境温度 | ΘJA | | 55 | | ℃/W | JEDEC 标准,1S0P PCB | 83 |
| ΘJC 芯片结温相对封装表面温度 | ΘJC | | 9.2 | | ℃/W | JEDEC 标准,1S0P PCB | 83 |
## CAD (KiCad official)
- Symbol: `FU6818Q`
- Footprint: `Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm`
- 3D model: QFN-56(7x7) (KiCad packages3D, STEP)
- 3D model files: `fu6818q-etched.step` / `fu6818q-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fu6818q.step` / `fu6818q.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Fortior Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588897947316994048) (292 pp, sha256 `d5a21e4e7fe9a48c`, retrieved 2026-11-10, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fu6818q-datasheet.pdf)