component
FU6815L
Public Made by Adomby adom
Fortior Tech Motor Driver ICs, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FU6815L
Fortior Tech · Motor Driver ICs · LQFP-48(7x7)
FU6815L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.2/C2M/A2M | bidirectional | GPIO P2.2, also serving as CMP2 negative input and AMP2 negative input. |
| 2 | P2.3/AD1/A2O/C4P/DA1 | bidirectional | GPIO P2.3, also ADC channel 1 input, AMP2 output, CMP4 positive input, and DAC1 output (unbuffered, capacitive load only). |
| 3 | P2.4/AD2 | bidirectional | GPIO P2.4, also ADC channel 2 input that can be used for bus voltage sampling. |
| 4 | P2.5/AD3 | bidirectional | GPIO P2.5, also ADC channel 3 input. |
| 5 | P2.6/C3M/DA0/AD11 | bidirectional | GPIO P2.6, also CMP3 negative input, DAC0 output (unbuffered, capacitive load only), and ADC channel 11 input. |
| 6 | P2.7/AD4/C3P/A0O/C4M | bidirectional | GPIO P2.7, also ADC channel 4 input that can be used for bus current sampling, CMP3 positive input, AMP0 output, and CMP4 negative input. |
| 7 | P3.0/A0M | bidirectional | GPIO P3.0, also AMP0 negative input. |
| 8 | P3.1/A0P | bidirectional | GPIO P3.1, also AMP0 positive input. |
| 9 | P3.2/AD5/VHALF | bidirectional | GPIO P3.2, also ADC channel 5 input and VREF/2 reference voltage output, which requires an external 1μF capacitor. |
| 10 | P3.3/AD6 | bidirectional | GPIO P3.3, also ADC channel 6 input. |
| 11 | P3.4/AD7/C3PS/C4MS | bidirectional | GPIO P3.4, also ADC channel 7 input, and after function transfer CMP3 positive input and CMP4 negative input. |
| 12 | P3.5/VREF | bidirectional | GPIO P3.5, also external ADC reference voltage input or internal VREF output, which requires an external 1μF to 4.7μF capacitor. |
| 13 | P4.4 | bidirectional | GPIO P4.4, configurable as external interrupt INT1 input. |
| 14 | P5.1 | bidirectional | GPIO P5.1. |
| 15 | P3.6/HAL2/RXD2 | bidirectional | GPIO P3.6, also Hall-IC2 logic-level input and UART2 RXD (two-wire mode) or single-wire TXD output/RXD input. |
| 16 | P3.7/HAL1/TXD2 | bidirectional | GPIO P3.7, also Hall-IC1 logic-level input and UART2 TXD output. |
| 17 | P0.0/TIM4S/TXD2S/SDA/OLDBGS | bidirectional | GPIO P0.0, configurable as external interrupt INT0 input, with alternate functions Timer4 input/output, UART2 TXD output, I2C SDA (configurable open-drain), and single-wire SPI debug output. |
| 18 | P0.1/DBG/TIM4/TIM3S/RXD2S/SCL | bidirectional | GPIO P0.1, configurable as external interrupt INT0 input, with alternate functions debug port, Timer4 input/output, Timer3 input/output, UART2 RXD/TXD, and I2C SCL (configurable open-drain). |
| 19 | P0.2/LXIN/HAL0 | bidirectional | GPIO P0.2, configurable as external interrupt INT0 input, with alternate functions 32.768 kHz crystal clock input and Hall-IC0 logic-level input. |
| 20 | P0.3/LXOUT/PFC | bidirectional | GPIO P0.3, configurable as external interrupt INT0 input, with alternate functions 32.768 kHz crystal clock output and PFC PWM output. |
| 21 | P0.4/NSS | bidirectional | GPIO P0.4, configurable as external interrupt INT1 input, and SPI chip-select (NSS) port. |
| 22 | P0.5/TXD/SCLK | bidirectional | GPIO P0.5, configurable as external interrupt INT0 input, with alternate functions UART1 TXD output and SPI clock SCLK. |
| 23 | P0.6/RXD/MOSI | bidirectional | GPIO P0.6, configurable as external interrupt INT0 input, with alternate functions UART1 RXD (two-wire) or single-wire TXD output/RXD input, and SPI MOSI. |
| 24 | P0.7/MISO/CXO/TIM2S/QEPA | bidirectional | GPIO P0.7, with alternate functions SPI MISO, comparator output test port CXO, Timer2 input/output after function transfer, and QEP encoder A input. |
| 25 | P1.0/TIM2/QEPB | bidirectional | GPIO P1.0, configurable as external interrupt INT1 input, with alternate functions Timer2 input/output and QEP encoder B input. |
| 26 | P1.1/TIM3 | bidirectional | GPIO P1.1, configurable as external interrupt INT0/INT1 input, with alternate function Timer3 input/output. |
| 27 | P4.1/L_DX | bidirectional | GPIO P4.1, configurable as external interrupt INT1 input, with alternate function PWM low-side X-phase output. |
| 28 | P4.2/H_DX | bidirectional | GPIO P4.2, configurable as external interrupt INT1 input, with alternate function PWM high-side X-phase output. |
| 29 | L_DU | output | PWM low-side U-phase output. |
| 30 | L_DV | output | PWM low-side V-phase output. |
| 31 | L_DW | output | PWM low-side W-phase output. |
| 32 | H_DU | output | PWM high-side U-phase output. |
| 33 | H_DV | output | PWM high-side V-phase output. |
| 34 | H_DW | output | PWM high-side W-phase output. |
| 35 | VCC | power_in | Power input whose voltage range is set by VCC_MODE: 5V to 28V in single-supply high-voltage mode (VCC_MODE=0), or shorted to VDD5 at 3V to 5.5V in low-voltage mode (VCC_MODE=1); requires a 4.7μF or larger filter capacitor. |
| 36 | VSS | power_in | Ground. |
| 37 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE (5V LDO output when VCC_MODE=0, external 3V to 5.5V input when VCC_MODE=1); requires ≥1μF capacitor. |
| 38 | P4.6 | bidirectional | GPIO P4.6, configurable as external interrupt INT1 input. |
| 39 | P4.7/TIM3S2/RXD2S2/RSTN/FICEK | input | Input-only GPIO P4.7 with configurable pull-up/pull-down, also serving as Timer3 input, UART2 RXD input, external active-low reset input with internal pull-up (RSTN, low for more than 50μs resets the chip), and FICE clock. |
| 40 | VDD18 | power_out | 1.85V LDO output supply, requires an external 1μF to 4.7μF capacitor. |
| 41 | P1.2/TIM4S2/TXD2S2/FICED | bidirectional | GPIO P1.2, configurable as external interrupt INT1 input, with alternate functions Timer4 input/output, UART2 TXD output, and FICE data. |
| 42 | P1.3/HBIAS/C1PS/C5P/A3O/AD12 | bidirectional | GPIO P1.3, configurable as external interrupt INT1 input, with alternate functions Hall bias supply (switched internally to VDD5, capable of high-current output), CMP1 positive input, CMP5 positive input, AMP3 output, and ADC channel 12 input. |
| 43 | P1.4/C0P/A3M/AD10/HAL0S | bidirectional | GPIO P1.4, configurable as external interrupt INT1 input, with alternate functions CMP0 positive input, AMP3 negative input, ADC channel 10 input, and Hall-IC0 logic-level input after function transfer. |
| 44 | P1.5/C0M/C2PS/C5M/A3P/AD13/DA2 | bidirectional | GPIO P1.5, configurable as external interrupt INT1 input, with alternate functions CMP0 negative input, CMP2 positive input after transfer, CMP5 negative input, AMP3 positive input, ADC channel 13 input, and DAC2 output (unbuffered, capacitive load only). |
| 45 | P1.6/C1P/A1P/AD9/HAL1S | bidirectional | GPIO P1.6, configurable as external interrupt INT1 input, with alternate functions CMP1 positive input, AMP1 positive input, ADC channel 9 input, and Hall-IC1 logic-level input after function transfer. |
| 46 | P1.7/C1M/A1M | bidirectional | GPIO P1.7, configurable as external interrupt INT1 input, with alternate functions CMP1 negative input and AMP1 negative input. |
| 47 | P2.0/AD0/A1O | bidirectional | GPIO P2.0, with alternate functions ADC channel 0 input and AMP1 output. |
| 48 | P2.1/C2P/A2P/AD8/HAL2S | bidirectional | GPIO P2.1, with alternate functions CMP2 positive input, AMP2 positive input, ADC channel 8 input, and Hall-IC2 logic-level input after function transfer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Power Supply Chip |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating junction temperature | TJ | -40 | 150 | ℃ | 72 | ||
| Storage temperature | TSTG | -55 | 150 | ℃ | 72 | ||
| VCC relative to VSS | VCC | -0.3 | 38 | V | 72 | ||
| VDD5 relative to VSS | VDD5 | -0.3 | 6.5 | V | 72 | ||
| RSTN and GPIO voltage relative to VSS | -0.3 | V | 72 | ||||
| VCC operating voltage, single-supply high-voltage mode | VCC | 5 | 28 | V | 单电源高压模式, TA = -40℃ ~ 85℃ | 73 | |
| VCC operating voltage, dual-supply mode | VCC | 5 | 36 | V | 双电源模式, VCC_MODE = 1, VCC ≥ VDD5, TA = -40℃ ~ 85℃ | 73 | |
| Output source current (PWM IO) | 30 | 50 | mA | P1_AN[HDIO] = 1 | 79 | ||
| Output sink current (PWM IO) | 60 | 100 | mA | P1_AN[HDIO] = 1 | 79 | ||
| ADC sampling time | 3 | 63 | ADCLK2 | 81 | |||
| VREF reference voltage | VREF | 4.3 | 4.5 | 4.7 | V | VREF_VHALF_CR[VREFVSEL] = 00 | 84 |
| System clock frequency | SYSCLK | 23.5 | 24 | 24.5 | MHz | 89 | |
| Low-speed clock frequency | 29 | 32.8 | 37 | kHz | 89 | ||
| RSTN reset low minimum time | 50 | μs | 90 | ||||
| VDD5 low-voltage reset voltage | VDD5 | 2.8 | 3 | 3.2 | V | 复位电压选择 LVR = 3.0V | 90 |
| VDD5 LDO output voltage | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V ~ 28V,VCC_MODE = 0 | 91 |
| VDD18 voltage | VDD18 | 1.65 | 1.85 | 2 | V | 91 | |
| BEMF built-in resistor | 5.4 | 6.8 | 8.2 | kΩ | 88 | ||
| Junction-to-ambient thermal resistance (θJA) | θJA | 52.4 | ℃/W | JEDEC 标准,2S2P PCB | 92 | ||
| Junction-to-ambient thermal resistance (θJA) | θJA | 72.2 | ℃/W | JEDEC 标准,1S0P PCB | 92 | ||
| Junction-to-case thermal resistance (θJC) | θJC | 17 | ℃/W | JEDEC 标准,1S0P PCB | 92 |
CAD (KiCad official)
- Symbol:
FU6815L - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6815l-etched.step/fu6815l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6815l.step/fu6815l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (409 pp, sha256
aa511465703ee355, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).