component
FU6812L2
Public Made by Adomby adom
Fortior Tech Motor Driver ICs, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
eff6635
FU6812L2
Fortior Tech · Motor Driver ICs · LQFP-48(7x7)
FU6812L2 from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.2/CMP2M/AMP2M | bidirectional | GPIO with configurable external interrupt 1 input, also CMP2 negative input and AMP2 negative input. |
| 2 | P2.3/AD1/AMP2O/CMP4P | bidirectional | GPIO with configurable external interrupt 1 input, ADC channel 1 input for the phase current 2 amplified signal, AMP2 output, and CMP4 positive input. |
| 3 | P2.4/AD2 | bidirectional | GPIO with configurable external interrupt 1 input and ADC channel 2 input for the bus voltage signal. |
| 4 | P2.5/AD3 | bidirectional | GPIO with configurable external interrupt 1 input and ADC channel 3 input. |
| 5 | P2.6/CMP3M/DA0/AD11 | bidirectional | GPIO with configurable external interrupt 1 input, overcurrent reference input as CMP3 negative input, internal DAC unbuffered voltage output, and ADC channel 11 input. |
| 6 | P2.7/AD4/CMP3P/AMP0O/CMP4M | bidirectional | GPIO with configurable external interrupt 1 input, ADC channel 4 input for the amplified bus current signal, CMP3 positive input for bus current overcurrent detection, AMP0 output, and CMP4 negative input. |
| 7 | P3.0/AMP0M | bidirectional | GPIO and AMP0 negative input used to amplify the bus current signal. |
| 8 | P3.1/AMP0P | bidirectional | GPIO and AMP0 positive input used to amplify the bus current signal. |
| 9 | P3.2/AD5/VHALF | bidirectional | GPIO, over-temperature signal input and ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output requiring an external 1μF capacitor. |
| 10 | P3.3/AD6/RXDS | bidirectional | GPIO, ADC channel 6 input, and after function transfer the UART RXD input in two-wire mode or the TXD output/RXD input in single-wire mode. |
| 11 | P3.4/AD7/TXDS | bidirectional | GPIO, analog speed control input and ADC channel 7 input, and after function transfer the UART TXD output. |
| 12 | P3.5/VREF | bidirectional | GPIO, ADC external reference voltage input or internal VREF output, requiring an external 1 to 4.7μF capacitor. |
| 13 | VSS | power_in | Ground. |
| 14 | IOVCC | power_in | GPIO power input at 3 to 5.5V with 1 to 10μF capacitor to ground, must not exceed VDD5; selected GPIO and gate driver outputs use IOVCC while the others use VDD5. |
| 15 | P3.6/HALL2 | bidirectional | GPIO and HALL2 logic level input. |
| 16 | P3.7/HALL1 | bidirectional | GPIO and HALL1 logic level input. |
| 17 | P0.0/SDA | bidirectional | GPIO and I2C SDA line with open-collector output. |
| 18 | P0.1/TIM4/SCL | bidirectional | GPIO, Timer4 capture mode input, and I2C SCL clock with open-drain output. |
| 19 | P0.2/HALL0 | bidirectional | GPIO and HALL0 logic level input. |
| 20 | P0.3 | bidirectional | GPIO. |
| 21 | P0.4/NSS | bidirectional | GPIO and SPI slave select port. |
| 22 | P0.5/TXD/MOSI | bidirectional | GPIO, UART1 data transmit before function transfer, and SPI MOSI master output or slave input. |
| 23 | P0.6/SCLK/RXD | bidirectional | GPIO, SPI interface clock CLK, and UART1 data receive before function transfer. |
| 24 | P0.7/MISO/CMPXO/TIM2S | bidirectional | GPIO, SPI MISO master input or slave output, comparator output test pin, and Timer2 capture input or PWM output after function transfer. |
| 25 | P1.0/TIM2 | bidirectional | GPIO with configurable external interrupt 1 input and Timer2 capture input or PWM output before function transfer. |
| 26 | P1.1/TIM3 | bidirectional | GPIO with configurable external interrupt 0/1 input and Timer3 capture mode input. |
| 27 | P4.1/L_DX | bidirectional | GPIO and X-phase low-side PWM output. |
| 28 | P4.2/H_DX | bidirectional | GPIO and X-phase high-side PWM output. |
| 29 | L_DU | output | U-phase low-side PWM output. |
| 30 | L_DV | output | V-phase low-side PWM output. |
| 31 | L_DW | output | W-phase low-side PWM output. |
| 32 | H_DU | output | U-phase high-side PWM output. |
| 33 | H_DV | output | V-phase high-side PWM output. |
| 34 | H_DW | output | W-phase high-side PWM output. |
| 35 | VCC | power_in | Power input whose voltage range depends on VCC_MODE, from 5 to 24V in single-supply high-voltage mode, 3 to 5.5V in low-voltage mode with VCC shorted to VDD5, or 5 to 36V in dual-supply mode, with a 10μF or larger filter capacitor. |
| 36 | VSS | power_in | Ground. |
| 37 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE, requiring an external 1 to 4.7μF capacitor. |
| 38 | VCC_MODE | input | Power mode control input that selects the supply configuration described for the VCC pin. |
| 39 | RSTN/FICEK | input | External reset input with internal pull-up and Schmitt trigger, also the FICE debug interface clock. |
| 40 | VDD18 | power_out | 1.85V LDO output requiring an external 1 to 4.7μF capacitor. |
| 41 | P1.2/FICED | bidirectional | GPIO with configurable external interrupt 1 input and FICE debug data port. |
| 42 | P1.3/HBIAS/CMP1PS | bidirectional | GPIO, HALL bias supply connected to VDD5 through an internal switch, and CMP1 positive input after function transfer. |
| 43 | P1.4/CMP0P/AD10/HALL0S | bidirectional | GPIO with configurable external interrupt 1 input, CMP0 positive input, ADC channel 10 input, and HALL0 logic level input after function transfer. |
| 44 | P1.5/CMP0M | bidirectional | GPIO with configurable external interrupt 1 input and CMP0 negative input. |
| 45 | P1.6/CMP1P/AMP1P/AD9/HALL1S | bidirectional | GPIO with configurable external interrupt 1 input, CMP1 positive input, AMP1 positive input for phase current 1 voltage signal, ADC channel 9 input, and HALL1 logic level input after function transfer. |
| 46 | P1.7/CMP1M/AMP1M | bidirectional | GPIO with CMP1 negative input and AMP1 negative input. |
| 47 | P2.0/AD0/AMP1O | bidirectional | GPIO with configurable external interrupt 1 input, ADC channel 0 input for the phase current 1 amplified signal, and AMP1 output. |
| 48 | P2.1/CMP2P/AMP2P/AD8/HALL2S | bidirectional | GPIO with configurable external interrupt 1 input, CMP2 positive input, AMP2 positive input for phase current 2 voltage signal, ADC channel 8 input, and HALL2 logic level input after function transfer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Power Supply Chip |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
FU6812L2 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6812l2-etched.step/fu6812l2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6812l2.step/fu6812l2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (411 pp, sha256
05a4e9038bde6635, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FU6812L2
**Fortior Tech** · Motor Driver ICs · LQFP-48(7x7)
FU6812L2 from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.2/CMP2M/AMP2M | bidirectional | GPIO with configurable external interrupt 1 input, also CMP2 negative input and AMP2 negative input. |
| 2 | P2.3/AD1/AMP2O/CMP4P | bidirectional | GPIO with configurable external interrupt 1 input, ADC channel 1 input for the phase current 2 amplified signal, AMP2 output, and CMP4 positive input. |
| 3 | P2.4/AD2 | bidirectional | GPIO with configurable external interrupt 1 input and ADC channel 2 input for the bus voltage signal. |
| 4 | P2.5/AD3 | bidirectional | GPIO with configurable external interrupt 1 input and ADC channel 3 input. |
| 5 | P2.6/CMP3M/DA0/AD11 | bidirectional | GPIO with configurable external interrupt 1 input, overcurrent reference input as CMP3 negative input, internal DAC unbuffered voltage output, and ADC channel 11 input. |
| 6 | P2.7/AD4/CMP3P/AMP0O/CMP4M | bidirectional | GPIO with configurable external interrupt 1 input, ADC channel 4 input for the amplified bus current signal, CMP3 positive input for bus current overcurrent detection, AMP0 output, and CMP4 negative input. |
| 7 | P3.0/AMP0M | bidirectional | GPIO and AMP0 negative input used to amplify the bus current signal. |
| 8 | P3.1/AMP0P | bidirectional | GPIO and AMP0 positive input used to amplify the bus current signal. |
| 9 | P3.2/AD5/VHALF | bidirectional | GPIO, over-temperature signal input and ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output requiring an external 1μF capacitor. |
| 10 | P3.3/AD6/RXDS | bidirectional | GPIO, ADC channel 6 input, and after function transfer the UART RXD input in two-wire mode or the TXD output/RXD input in single-wire mode. |
| 11 | P3.4/AD7/TXDS | bidirectional | GPIO, analog speed control input and ADC channel 7 input, and after function transfer the UART TXD output. |
| 12 | P3.5/VREF | bidirectional | GPIO, ADC external reference voltage input or internal VREF output, requiring an external 1 to 4.7μF capacitor. |
| 13 | VSS | power_in | Ground. |
| 14 | IOVCC | power_in | GPIO power input at 3 to 5.5V with 1 to 10μF capacitor to ground, must not exceed VDD5; selected GPIO and gate driver outputs use IOVCC while the others use VDD5. |
| 15 | P3.6/HALL2 | bidirectional | GPIO and HALL2 logic level input. |
| 16 | P3.7/HALL1 | bidirectional | GPIO and HALL1 logic level input. |
| 17 | P0.0/SDA | bidirectional | GPIO and I2C SDA line with open-collector output. |
| 18 | P0.1/TIM4/SCL | bidirectional | GPIO, Timer4 capture mode input, and I2C SCL clock with open-drain output. |
| 19 | P0.2/HALL0 | bidirectional | GPIO and HALL0 logic level input. |
| 20 | P0.3 | bidirectional | GPIO. |
| 21 | P0.4/NSS | bidirectional | GPIO and SPI slave select port. |
| 22 | P0.5/TXD/MOSI | bidirectional | GPIO, UART1 data transmit before function transfer, and SPI MOSI master output or slave input. |
| 23 | P0.6/SCLK/RXD | bidirectional | GPIO, SPI interface clock CLK, and UART1 data receive before function transfer. |
| 24 | P0.7/MISO/CMPXO/TIM2S | bidirectional | GPIO, SPI MISO master input or slave output, comparator output test pin, and Timer2 capture input or PWM output after function transfer. |
| 25 | P1.0/TIM2 | bidirectional | GPIO with configurable external interrupt 1 input and Timer2 capture input or PWM output before function transfer. |
| 26 | P1.1/TIM3 | bidirectional | GPIO with configurable external interrupt 0/1 input and Timer3 capture mode input. |
| 27 | P4.1/L_DX | bidirectional | GPIO and X-phase low-side PWM output. |
| 28 | P4.2/H_DX | bidirectional | GPIO and X-phase high-side PWM output. |
| 29 | L_DU | output | U-phase low-side PWM output. |
| 30 | L_DV | output | V-phase low-side PWM output. |
| 31 | L_DW | output | W-phase low-side PWM output. |
| 32 | H_DU | output | U-phase high-side PWM output. |
| 33 | H_DV | output | V-phase high-side PWM output. |
| 34 | H_DW | output | W-phase high-side PWM output. |
| 35 | VCC | power_in | Power input whose voltage range depends on VCC_MODE, from 5 to 24V in single-supply high-voltage mode, 3 to 5.5V in low-voltage mode with VCC shorted to VDD5, or 5 to 36V in dual-supply mode, with a 10μF or larger filter capacitor. |
| 36 | VSS | power_in | Ground. |
| 37 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE, requiring an external 1 to 4.7μF capacitor. |
| 38 | VCC_MODE | input | Power mode control input that selects the supply configuration described for the VCC pin. |
| 39 | RSTN/FICEK | input | External reset input with internal pull-up and Schmitt trigger, also the FICE debug interface clock. |
| 40 | VDD18 | power_out | 1.85V LDO output requiring an external 1 to 4.7μF capacitor. |
| 41 | P1.2/FICED | bidirectional | GPIO with configurable external interrupt 1 input and FICE debug data port. |
| 42 | P1.3/HBIAS/CMP1PS | bidirectional | GPIO, HALL bias supply connected to VDD5 through an internal switch, and CMP1 positive input after function transfer. |
| 43 | P1.4/CMP0P/AD10/HALL0S | bidirectional | GPIO with configurable external interrupt 1 input, CMP0 positive input, ADC channel 10 input, and HALL0 logic level input after function transfer. |
| 44 | P1.5/CMP0M | bidirectional | GPIO with configurable external interrupt 1 input and CMP0 negative input. |
| 45 | P1.6/CMP1P/AMP1P/AD9/HALL1S | bidirectional | GPIO with configurable external interrupt 1 input, CMP1 positive input, AMP1 positive input for phase current 1 voltage signal, ADC channel 9 input, and HALL1 logic level input after function transfer. |
| 46 | P1.7/CMP1M/AMP1M | bidirectional | GPIO with CMP1 negative input and AMP1 negative input. |
| 47 | P2.0/AD0/AMP1O | bidirectional | GPIO with configurable external interrupt 1 input, ADC channel 0 input for the phase current 1 amplified signal, and AMP1 output. |
| 48 | P2.1/CMP2P/AMP2P/AD8/HALL2S | bidirectional | GPIO with configurable external interrupt 1 input, CMP2 positive input, AMP2 positive input for phase current 2 voltage signal, ADC channel 8 input, and HALL2 logic level input after function transfer. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Power Supply Chip |
| Pins | 48 |
## CAD (KiCad official)
- Symbol: `FU6812L2`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `fu6812l2-etched.step` / `fu6812l2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fu6812l2.step` / `fu6812l2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Fortior Tech datasheet](docs/fu6812l2-datasheet.pdf) (411 pp, sha256 `05a4e9038bde6635`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fu6812l2-datasheet.pdf)