main
Ray Publish 0.1.0 f488e2c

FTC252012S100MBCA

cjiang Changjiang Microelectronics Tech · Power Inductors · 1008

FTC252012S100MBCA from cjiang Changjiang Microelectronics Tech, in a 1008. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive First terminal of the 10 µH wire-wound molded power inductor (L = 10.0 µH at 0 A, 1 MHz per the FTC series table); the outline drawing shows two end electrodes, each E = 0.85±0.2 mm wide.
2 2 passive Second terminal of the 10 µH wire-wound molded power inductor; the part is non-polarized, and the land pattern is A = 2.60 mm overall, B = 0.70 mm gap, C = 2.10 mm wide.

Key specifications

Parameter Value
Manufacturer cjiang Changjiang Microelectronics Tech
Package 1008
Category Inductors, Coils, Chokes
Pins 2

CAD (KiCad official)

  • Symbol: FTC252012S100MBCA
  • Footprint: Inductor_SMD:L_1008_2520Metric
  • 3D model: 1008 (KiCad packages3D, STEP)
  • 3D model files: ftc252012s100mbca-etched.step / ftc252012s100mbca-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ftc252012s100mbca.step / ftc252012s100mbca.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: cjiang Changjiang Microelectronics Tech datasheet (61 pp, sha256 146e29e9a6233da0, retrieved 2026-10-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF