component
FT93C56A-USR-B
Public Made by Adomby adom
FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFT93C56A-USR-B
FMD(Fremont Micro Devices) · EEPROM · SOP-8
FT93C56A-USR-B from FMD(Fremont Micro Devices), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input of the serial EEPROM; a rising edge on CS with SCL held low precedes each instruction, and it must be low for at least 250 ns (tCS) before READY/BUSY status is read on DO. |
| 2 | SCL | input | Serial Clock input whose rising edge latches data into the EEPROM and clocks data out of it, at up to 2 MHz at 4.5V to 5.5V. |
| 3 | DI | input | Serial Data Input that receives the start bit, op-code, address and data bits on the rising edge of SCL. |
| 4 | DO | tri_state | Serial Data Output that clocks out read data and indicates READY/BUSY status during a programming cycle when CS is brought high, and goes high impedance when CS is low. |
| 5 | GND | power_in | Ground. |
| 6 | ORG | input | Internal Organization input: connected to VCC or left unconnected selects x16 (128 words of 16 bits), connected to ground selects x8 (256 bytes); internally recognized as VIH if unconnected. |
| 7 | DC | unconnected | Don't Connect pin that must be left unconnected. |
| 8 | VCC | power_in | Power supply, 1.8V to 5.5V for the FT93C56A variant. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FMD(Fremont Micro Devices) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC1 | 1.8 | 5.5 | V | 10 | ||
| Operating temperature | -40 | 85 | °C | Industrial | 2 | ||
| Storage temperature | -50 | 125 | °C | 2 | |||
| Input voltage on any pin relative to ground | -0.3 | V | -0.3V to VCC + 0.3V | 2 | |||
| Maximum voltage | 8 | V | 2 | ||||
| Supply Current READ | ICC | 0.5 | 2 | mA | VCC = 5.0V, READ at 1.0 MHz | 10 | |
| Supply Current WRITE | ICC | 0.5 | 2 | mA | VCC = 5.0V, WRITE at 1.0 MHz | 10 | |
| Standby Current | ISB1 | 0.1 | µA | VCC = 1.8V CS = 0V | 10 | ||
| Standby Current | ISB2 | 1.5 | µA | VCC = 2.5V CS = 0V | 10 | ||
| Input Leakage | IIL | 0.1 | 1 | µA | Vin = 0V to VCC | 10 | |
| Output Leakage | IOL | 0.1 | 1 | µA | Vin = 0V to VCC | 10 | |
| Input Low Voltage | VIL1 | -0.6 | 0.8 | V | 4.5V ≤ VCC ≤ 5.5V | 10 | |
| Input High Voltage | VIH1 | 2 | V | 4.5V ≤ VCC ≤ 5.5V | 10 | ||
| Input Low Voltage | VIL2 | -0.6 | V | 1.8V ≤ VCC ≤ 2.7V | 10 | ||
| Output Low Voltage | VOL1 | 0.4 | V | IOL = 2.1 mA | 10 | ||
| Output High Voltage | VOH1 | 2.4 | V | 4.5V ≤ VCC ≤ 5.5V, IOH = -0.4 mA | 10 | ||
| Output Low Voltage | VOL12 | 0.2 | V | IOL = 0.15 mA | 10 | ||
| SCL Clock Frequency | fSCL | 0 | 2 | MHz | 4.5V ≤ VCC ≤ 5.5V | 9 | |
| SCL Clock Frequency | fSCL | 0 | 1 | MHz | 2.7V ≤ VCC ≤ 5.5V | 9 | |
| SCL Clock Frequency | fSCL | 0 | 0.25 | MHz | 1.8V ≤ VCC ≤ 5.5V | 9 | |
| SCL High Time | tSCLH | 250 | ns | 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| SCL High Time | tSCLH | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| SCL Low Time | tSCLL | 250 | ns | 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| SCL Low Time | tSCLL | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| Minimum CS Low Time | tCS | 250 | ns | 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| Minimum CS Low Time | tCS | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| CS Setup Time Relative to SCL | tCSS | 50 | ns | 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| CS Setup Time Relative to SCL | tCSS | 200 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| DI Setup Time Relative to SCL | tDIS | 100 | ns | 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| DI Setup Time Relative to SCL | tDIS | 400 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| CS Hold Time Relative to SCL | tCSH | 0 | ns | 9 | |||
| DI Hold Time Relative to SCL | tDIH | 100 | ns | 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| DI Hold Time Relative to SCL | tDIH | 400 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| Output Delay to '1' | tPD1 | 250 | ns | AC Test, 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| Output Delay to '1' | tPD1 | 1000 | ns | AC Test, 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| Output Delay to '0' | tPD0 | 250 | ns | AC Test, 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| Output Delay to '0' | tPD0 | 1000 | ns | AC Test, 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| CS to Status Valid | tSV | 250 | ns | AC Test, 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| CS to Status Valid | tSV | 1000 | ns | AC Test, 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| CS to DO in High Impedance | tDF | 100 | ns | AC Test CS = VIL, 4.5V ≤ VCC ≤ 5.5V | 9 | ||
| CS to DO in High Impedance | tDF | 400 | ns | AC Test CS = VIL, 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| Write Cycle Time | tWC | 3 | 10 | ms | 4.5V ≤ VCC ≤ 5.5V | 9 |
CAD (KiCad official)
- Symbol:
FT93C56A-USR-B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ft93c56a-usr-b-etched.step/ft93c56a-usr-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft93c56a-usr-b.step/ft93c56a-usr-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FMD(Fremont Micro Devices) datasheet (24 pp, sha256
65559b4f3db0bd20, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).