component
FT600Q-B-T
Public Made by Adomby adom
FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FT600Q-B-T
FTDI CHIP · Global Sourcing Parts · QFN-56(7x7)
FT600Q-B-T from FTDI CHIP, in a QFN-56(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | +1.0V power input for PLL. |
| 2 | BE_0 | bidirectional | Parallel FIFO bus byte enable I/O bit 0. |
| 3 | BE_1 | bidirectional | Parallel FIFO bus byte enable I/O bit 1. |
| 4 | TXE_N | output | In 245 Synchronous FIFO mode, Transmit FIFO Empty indicates at least 1 byte of space is available and data should only be written while this signal is logic 0; in Multi-Channel FIFO mode it is an optional Status Valid output. |
| 5 | RXF_N | output | In 245 Synchronous FIFO mode, Receive FIFO Full indicates at least 1 byte of data is available and data should only be read while this signal is logic 0; in Multi-Channel FIFO mode it is the Data Receive Acknowledge output. |
| 6 | SIWU_N | input | Reserved; an external pull-up must be added for normal operation. |
| 7 | WR_N | input | In 245 Synchronous FIFO mode this is the active-low Write Enable input; in Multi-Channel FIFO mode it is the active-low Data Transaction Request input. |
| 8 | RD_N | input | In 245 Synchronous FIFO mode this is the active-low Read Enable input. |
| 9 | OE_N | input | In 245 Synchronous FIFO mode this is the active-low Data Output Enable input. |
| 10 | RESET_N | input | Chip reset input, active low. |
| 11 | WAKEUP_N | bidirectional | Suspend/remote wakeup pin, low by default when USB is active and high in USB suspend; driving it low in suspend generates a remote wakeup signal to the USB host. |
| 12 | GPIO0 | bidirectional | Configurable GPIO port 0, which is also sampled with GPIO1 at power-up to select the chip mode. |
| 13 | GPIO1 | bidirectional | Configurable GPIO port 1, which is also sampled with GPIO0 at power-up to select the chip mode. |
| 14 | Reserved | unconnected | Reserved; do not connect. |
| 15 | VCC33 | power_in | +3.3V power input for chip and internal LDO. |
| 16 | XI | input | Crystal input for the internal oscillator; a 30MHz ±20ppm crystal is recommended across XI and XO. |
| 17 | XO | output | Crystal output for the internal oscillator; the crystal must be connected across XI and XO, and XO cannot be tied to GND to use an oscillator instead. |
| 18 | DP | bidirectional | High-speed USB differential transceiver (positive). |
| 19 | VCC33 | power_in | +3.3V power input for chip and internal LDO. |
| 20 | DM | bidirectional | High-speed USB differential transceiver (negative). |
| 21 | RREF | input | PHY reference resistor input; connect a 1.6kΩ 1% resistor to ground to provide the reference voltage to the USB2 PHY. |
| 22 | VDDA | power_in | +3.3V power input for USB2.0 and USB3.0 PHYs. |
| 23 | VD10 | power_in | +1.0V core voltage input. |
| 24 | TODN | output | SuperSpeed USB transmitter differential pair (negative). |
| 25 | TODP | output | SuperSpeed USB transmitter differential pair (positive). |
| 26 | VD10 | power_in | +1.0V core voltage input. |
| 27 | RIDN | input | SuperSpeed USB receiver differential pair (negative). |
| 28 | RIDP | input | SuperSpeed USB receiver differential pair (positive). |
| 29 | VBUS | power_in | USB bus power input. |
| 30 | VCC33 | power_in | +3.3V power input for chip and internal LDO. |
| 31 | DV10 | power_out | +1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF capacitor to ground is recommended. |
| 32 | GND | power_in | Ground. |
| 33 | DATA_0 | bidirectional | Parallel FIFO bus data I/O bit 0. |
| 34 | DATA_1 | bidirectional | Parallel FIFO bus data I/O bit 1. |
| 35 | DATA_2 | bidirectional | Parallel FIFO bus data I/O bit 2. |
| 36 | DATA_3 | bidirectional | Parallel FIFO bus data I/O bit 3. |
| 37 | VD10 | power_in | +1.0V core voltage input. |
| 38 | VCCIO | power_in | Power input for I/O block, supports +1.8/+2.5/+3.3V. |
| 39 | DATA_4 | bidirectional | Parallel FIFO bus data I/O bit 4. |
| 40 | DATA_5 | bidirectional | Parallel FIFO bus data I/O bit 5. |
| 41 | DATA_6 | bidirectional | Parallel FIFO bus data I/O bit 6. |
| 42 | DATA_7 | bidirectional | Parallel FIFO bus data I/O bit 7. |
| 43 | CLK | output | Parallel FIFO bus clock output to the FIFO bus master, configurable as 66MHz or 100MHz for both FIFO bus modes. |
| 44 | VCCIO | power_in | Power input for I/O block, supports +1.8/+2.5/+3.3V. |
| 45 | DATA_8 | bidirectional | Parallel FIFO bus data I/O bit 8. |
| 46 | DATA_9 | bidirectional | Parallel FIFO bus data I/O bit 9. |
| 47 | DATA_10 | bidirectional | Parallel FIFO bus data I/O bit 10. |
| 48 | DATA_11 | bidirectional | Parallel FIFO bus data I/O bit 11. |
| 49 | GND | power_in | Ground. |
| 50 | VD10 | power_in | +1.0V core voltage input. |
| 51 | GND | power_in | Ground. |
| 52 | VCCIO | power_in | Power input for I/O block, supports +1.8/+2.5/+3.3V. |
| 53 | DATA_12 | bidirectional | Parallel FIFO bus data I/O bit 12. |
| 54 | DATA_13 | bidirectional | Parallel FIFO bus data I/O bit 13. |
| 55 | DATA_14 | bidirectional | Parallel FIFO bus data I/O bit 14. |
| 56 | DATA_15 | bidirectional | Parallel FIFO bus data I/O bit 15. |
| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI CHIP |
| Package | QFN-56(7x7) |
| Category | Global Sourcing Parts |
| Pins | 57 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | Degrees C | 19 | |||
| Ambient Operating Temperature | -40 | 85 | Degrees C | Power Applied | 19 | ||
| VCC33/VDDA Supply Voltage | VCC33/VDDA | -0.3 | 4.6 | V | 19 | ||
| VCCIO Supply Voltage | VCCIO | -0.3 | 4 | V | 19 | ||
| VD10 Core Supply Voltage | VD10 | -0.5 | 1.4 | V | 19 | ||
| AVDD PLL Supply Voltage | AVDD | -0.5 | 1.4 | V | 19 | ||
| VCC Operating Supply Voltage | VCC33/VDDA | 3 | 3.3 | 3.6 | V | 20 | |
| VCCIO Operating Supply Voltage | VCCIO_1 | 3 | 3.3 | 3.6 | V | VCCIO=3.3V | 20 |
| VCCIO Operating Supply Voltage | VCCIO_2 | 2.3 | 2.5 | 2.7 | V | VCCIO=2.5V | 20 |
| VCCIO Operating Supply Voltage | VCCIO_3 | 1.65 | 1.8 | 1.95 | V | VCCIO=1.8V | 20 |
| Core/PLL Operating Supply Voltage | VD10/AVDD | 0.9 | 1 | 1.1 | V | 20 | |
| Input/output Leakage | Iin/Iout(3.3V) | -10 | 10 | uA | Without pull-up/down | 21 | |
| Input pull-up/pull down resistance | Rpu/Rpd | 30 | 50 | 75 | KΩ | Vout=0~ VCCIO | 21 |
| Output drive strength | Iout(VCCIO=3.3V) | 10 | mA | Total current | 21 | ||
| Output drive strength | Iout(VCCIO=2.5V) | 9.4 | mA | Total current | 21 | ||
| Output drive strength | Iout(VCCIO=1.8V) | 5 | mA | Total current | 21 | ||
| Pin Capacitance | Cp | 2 | pF | 21 | |||
| VCCIO Operating Supply Voltage (3.3V) | VCCIO_3.3V | 3 | 3.3 | 3.6 | V | Normal Operation | 21 |
| VCCIO Operating Supply Voltage (2.5V) | VCCIO_2.5V | 2.3 | 2.5 | 2.7 | V | Normal Operation | 21 |
| VCCIO Operating Supply Voltage (1.8V) | VCCIO_1.8V | 1.65 | 1.8 | 1.95 | V | Normal Operation | 21 |
| Slave Drive Data Set Up Time | T1 | 3 | ns | 17 | |||
| Slave Drive Data Hold Time | T2 | 3.5 | ns | 17 | |||
| Master Drive Data Set Up Time | T3 | 1 | ns | 17 | |||
| Master Drive Date Hold Time | T4 | 4.8 | ns | 17 |
CAD (KiCad official)
- Symbol:
FT600Q-B-T - Footprint:
Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm - 3D model: QFN-56(7x7) (KiCad packages3D, STEP)
- 3D model files:
ft600q-b-t-etched.step/ft600q-b-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft600q-b-t.step/ft600q-b-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FTDI CHIP datasheet (33 pp, sha256
9b5b76cc23a65d5e, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).