← Commit history
README.md+38−43
@@ -11,34 +11,34 @@ FT600Q-B-T from FTDI CHIP, in a QFN-56(7x7). Pinout and pin descriptions extract | 1 | AVDD | power_in | +1.0V power input for PLL. | | 2 | BE_0 | bidirectional | Parallel FIFO bus byte enable I/O bit 0. | | 3 | BE_1 | bidirectional | Parallel FIFO bus byte enable I/O bit 1. |-| 4 | TXE_N | output | 245 Synchronous FIFO mode: Transmit FIFO Empty output, write to the FIFO only when logic 0; Multi-Channel FIFO mode: optional Status Valid output. |-| 5 | RXF_N | output | 245 Synchronous FIFO mode: Receive FIFO Full output, read from the FIFO only when logic 0; Multi-Channel FIFO mode: Data Receive Acknowledge output. |-| 6 | SIWU_N | input | Reserved; add external pull up in normal operation. |-| 7 | WR_N | input | 245 Synchronous FIFO mode: Write Enable input, active low; Multi-Channel FIFO mode: Data Transaction Request input, active low. |-| 8 | RD_N | input | 245 Synchronous FIFO mode: Read Enable input, active low. |-| 9 | OE_N | input | 245 Synchronous FIFO mode: Data Output Enable input, active low. |+| 4 | TXE_N | output | In 245 Synchronous FIFO mode, Transmit FIFO Empty indicates at least 1 byte of space is available and data should only be written while this signal is logic 0; in Multi-Channel FIFO mode it is an optional Status Valid output. |+| 5 | RXF_N | output | In 245 Synchronous FIFO mode, Receive FIFO Full indicates at least 1 byte of data is available and data should only be read while this signal is logic 0; in Multi-Channel FIFO mode it is the Data Receive Acknowledge output. |+| 6 | SIWU_N | input | Reserved; an external pull-up must be added for normal operation. |+| 7 | WR_N | input | In 245 Synchronous FIFO mode this is the active-low Write Enable input; in Multi-Channel FIFO mode it is the active-low Data Transaction Request input. |+| 8 | RD_N | input | In 245 Synchronous FIFO mode this is the active-low Read Enable input. |+| 9 | OE_N | input | In 245 Synchronous FIFO mode this is the active-low Data Output Enable input. | | 10 | RESET_N | input | Chip reset input, active low. |-| 11 | WAKEUP_N | bidirectional | Suspend/remote wakeup pin, low by default when USB is active and high in suspend; driving it low in USB suspend generates a remote wakeup to the USB host. |-| 12 | GPIO0 | bidirectional | Configurable GPIO port0. |-| 13 | GPIO1 | bidirectional | Configurable GPIO port1. |-| 14 | Reserved | unconnected | Reserved, do not connect. |+| 11 | WAKEUP_N | bidirectional | Suspend/remote wakeup pin, low by default when USB is active and high in USB suspend; driving it low in suspend generates a remote wakeup signal to the USB host. |+| 12 | GPIO0 | bidirectional | Configurable GPIO port 0, which is also sampled with GPIO1 at power-up to select the chip mode. |+| 13 | GPIO1 | bidirectional | Configurable GPIO port 1, which is also sampled with GPIO0 at power-up to select the chip mode. |+| 14 | Reserved | unconnected | Reserved; do not connect. | | 15 | VCC33 | power_in | +3.3V power input for chip and internal LDO. |-| 16 | XI | input | Crystal input for the internal oscillator. |-| 17 | XO | output | Crystal output for the internal oscillator. |+| 16 | XI | input | Crystal input for the internal oscillator; a 30MHz ±20ppm crystal is recommended across XI and XO. |+| 17 | XO | output | Crystal output for the internal oscillator; the crystal must be connected across XI and XO, and XO cannot be tied to GND to use an oscillator instead. | | 18 | DP | bidirectional | High-speed USB differential transceiver (positive). | | 19 | VCC33 | power_in | +3.3V power input for chip and internal LDO. | | 20 | DM | bidirectional | High-speed USB differential transceiver (negative). |-| 21 | RREF | input | PHY reference resistor input; connect a 1.6K Ω 1% resistor to ground to provide the reference voltage to the USB2 PHY. |+| 21 | RREF | input | PHY reference resistor input; connect a 1.6kΩ 1% resistor to ground to provide the reference voltage to the USB2 PHY. | | 22 | VDDA | power_in | +3.3V power input for USB2.0 and USB3.0 PHYs. | | 23 | VD10 | power_in | +1.0V core voltage input. |-| 24 | TODN | output | Super Speed USB transmitter differential pair (negative). |-| 25 | TODP | output | Super Speed USB transmitter differential pair (positive). |+| 24 | TODN | output | SuperSpeed USB transmitter differential pair (negative). |+| 25 | TODP | output | SuperSpeed USB transmitter differential pair (positive). | | 26 | VD10 | power_in | +1.0V core voltage input. |-| 27 | RIDN | input | Super Speed USB receiver differential pair (negative). |-| 28 | RIDP | input | Super Speed USB receiver differential pair (positive). |-| 29 | VBUS | power_in | USB BUS power input. |+| 27 | RIDN | input | SuperSpeed USB receiver differential pair (negative). |+| 28 | RIDP | input | SuperSpeed USB receiver differential pair (positive). |+| 29 | VBUS | power_in | USB bus power input. | | 30 | VCC33 | power_in | +3.3V power input for chip and internal LDO. |-| 31 | DV10 | power_out | +1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF cap to ground is recommended. |+| 31 | DV10 | power_out | +1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF capacitor to ground is recommended. | | 32 | GND | power_in | Ground. | | 33 | DATA_0 | bidirectional | Parallel FIFO bus data I/O bit 0. | | 34 | DATA_1 | bidirectional | Parallel FIFO bus data I/O bit 1. |@@ -50,7 +50,7 @@ FT600Q-B-T from FTDI CHIP, in a QFN-56(7x7). Pinout and pin descriptions extract | 40 | DATA_5 | bidirectional | Parallel FIFO bus data I/O bit 5. | | 41 | DATA_6 | bidirectional | Parallel FIFO bus data I/O bit 6. | | 42 | DATA_7 | bidirectional | Parallel FIFO bus data I/O bit 7. |-| 43 | CLK | output | Parallel FIFO bus clock output to the FIFO bus master; frequency configurable as 66MHz or 100MHz for both FIFO bus modes. |+| 43 | CLK | output | Parallel FIFO bus clock output to the FIFO bus master, configurable as 66MHz or 100MHz for both FIFO bus modes. | | 44 | VCCIO | power_in | Power input for I/O block, supports +1.8/+2.5/+3.3V. | | 45 | DATA_8 | bidirectional | Parallel FIFO bus data I/O bit 8. | | 46 | DATA_9 | bidirectional | Parallel FIFO bus data I/O bit 9. |@@ -82,34 +82,29 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---| | Storage Temperature |  | -65 |  | 150 | Degrees C |  | 19 |-| Ambient Operating Temperature (Power Applied) |  | -40 |  | 85 | Degrees C |  | 19 |-| VCC33/VDDA Supply Voltage |  | -0.3 |  | 4.6 | V |  | 19 |-| VCCIO Supply Voltage |  | -0.3 |  | 4 | V |  | 19 |-| VD10 Core Supply Voltage |  | -0.5 |  | 1.4 | V |  | 19 |-| AVDD PLL Supply Voltage |  | -0.5 |  | 1.4 | V |  | 19 |-| IOs DC Input Voltage (minimum; maximum printed as +VCCIO+0.5 V, not converted) |  | -0.5 |  |  | V |  | 19 |-| Human Body Model (HBM) ESD |  | -2 |  | 2 | kV | JEDEC EIA/JESD22-A114-B, Class 2 | 19 |-| Machine Model (MM) ESD |  | -200 |  | 200 | V | JEDEC EIA/JESD22-A115-A, Class B | 19 |-| Charged Device Model (CDM) ESD |  | -500 |  | 500 | V | JEDEC EIA/JESD22-C101-D, Class-III | 19 |-| Latch-up |  | -200 |  | 200 | mA | JESD78, Trigger Class-II | 19 |-| VCC Operating Supply Voltage (VCC33/VDDA) | VCC33/VDDA | 3 | 3.3 | 3.6 | V |  | 20 |+| Ambient Operating Temperature |  | -40 |  | 85 | Degrees C | Power Applied | 19 |+| VCC33/VDDA Supply Voltage | VCC33/VDDA | -0.3 |  | 4.6 | V |  | 19 |+| VCCIO Supply Voltage | VCCIO | -0.3 |  | 4 | V |  | 19 |+| VD10 Core Supply Voltage | VD10 | -0.5 |  | 1.4 | V |  | 19 |+| AVDD PLL Supply Voltage | AVDD | -0.5 |  | 1.4 | V |  | 19 |+| VCC Operating Supply Voltage | VCC33/VDDA | 3 | 3.3 | 3.6 | V |  | 20 | | VCCIO Operating Supply Voltage | VCCIO_1 | 3 | 3.3 | 3.6 | V | VCCIO=3.3V | 20 | | VCCIO Operating Supply Voltage | VCCIO_2 | 2.3 | 2.5 | 2.7 | V | VCCIO=2.5V | 20 | | VCCIO Operating Supply Voltage | VCCIO_3 | 1.65 | 1.8 | 1.95 | V | VCCIO=1.8V | 20 | | Core/PLL Operating Supply Voltage | VD10/AVDD | 0.9 | 1 | 1.1 | V |  | 20 |-| VCCIO Operating Supply Voltage 3.3V I/O | VCCIO_3.3V | 3 | 3.3 | 3.6 | V | Normal Operation | 21 |-| VCCIO Operating Supply Voltage 2.5V I/O | VCCIO_2.5V | 2.3 | 2.5 | 2.7 | V | Normal Operation | 21 |-| VCCIO Operating Supply Voltage 1.8V I/O | VCCIO_1.8V | 1.65 | 1.8 | 1.95 | V | Normal Operation | 21 | | Input/output Leakage | Iin/Iout(3.3V) | -10 |  | 10 | uA | Without pull-up/down | 21 |-| Input pull-up/pull down resistance | Rpu/Rpd | 30 | 50 | 75 | KΩ | Vout=0~VCCIO | 21 |-| Output drive strength (VCCIO=3.3V) | Iout(VCCIO=3.3V) | 10 |  |  | mA | Total current | 21 |-| Output drive strength (VCCIO=2.5V) | Iout(VCCIO=2.5V) | 9.4 |  |  | mA | Total current | 21 |-| Output drive strength (VCCIO=1.8V) | Iout(VCCIO=1.8V) | 5 |  |  | mA | Total current | 21 |+| Input pull-up/pull down resistance | Rpu/Rpd | 30 | 50 | 75 | KΩ | Vout=0~ VCCIO | 21 |+| Output drive strength | Iout(VCCIO=3.3V) | 10 |  |  | mA | Total current | 21 |+| Output drive strength | Iout(VCCIO=2.5V) | 9.4 |  |  | mA | Total current | 21 |+| Output drive strength | Iout(VCCIO=1.8V) | 5 |  |  | mA | Total current | 21 | | Pin Capacitance | Cp |  |  | 2 | pF |  | 21 |-| Slave Drive Data Set Up Time (T1) | T1 | 3 |  |  | ns |  | 17 |-| Slave Drive Data Hold Time (T2) | T2 | 3.5 |  |  | ns |  | 17 |-| Master Drive Data Set Up Time (T3) | T3 | 1 |  |  | ns |  | 17 |-| Master Drive Data Hold Time (T4) | T4 | 4.8 |  |  | ns |  | 17 |+| VCCIO Operating Supply Voltage (3.3V) | VCCIO_3.3V | 3 | 3.3 | 3.6 | V | Normal Operation | 21 |+| VCCIO Operating Supply Voltage (2.5V) | VCCIO_2.5V | 2.3 | 2.5 | 2.7 | V | Normal Operation | 21 |+| VCCIO Operating Supply Voltage (1.8V) | VCCIO_1.8V | 1.65 | 1.8 | 1.95 | V | Normal Operation | 21 |+| Slave Drive Data Set Up Time | T1 | 3 |  |  | ns |  | 17 |+| Slave Drive Data Hold Time | T2 | 3.5 |  |  | ns |  | 17 |+| Master Drive Data Set Up Time | T3 | 1 |  |  | ns |  | 17 |+| Master Drive Date Hold Time | T4 | 4.8 |  |  | ns |  | 17 |  ## CAD (KiCad official) @@ -122,7 +117,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [FTDI CHIP datasheet](docs/ft600q-b-t-datasheet.pdf) (33 pp, sha256 `9b5b76cc23a65d5e`, retrieved 2026-11-10, tier: lcsc)+- **Datasheet:** [FTDI CHIP datasheet](docs/ft600q-b-t-datasheet.pdf) (33 pp, sha256 `9b5b76cc23a65d5e`, retrieved 2026-11-11, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
ft600q-b-t-hero.overlay.json+1329−1327
@@ -1,1329 +1,1331 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "FT600Q-B-T",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 57,-      "span_mm": 10.9,-      "dash_mm": 0.2725,-      "gap_mm": 0.1635,-      "pad_stroke_mm": 0.0654-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 9,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 56,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.616,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.5,-      3.5,-      -3.5,-      3.5-    ],-    "pads_bbox_mm": [-      -3.85,-      3.85,-      -3.85,-      3.85-    ],-    "seating_z_mm": -0.0-  },-  "sources": {-    "glb": "ft600q-b-t-etched.glb",-    "glb_sha256": "5fa9ef9985ab42a6bd1573397ead90ac10546e15fd47bae07ab55af7f096b5f9",-    "footprint": "ft600q-b-t.kicad_mod",-    "footprint_sha256": "4e36d21e58c32fd2c813872895be35a0d67d1c18b53206ff4c34824dd50b62ea",-    "pins": "page.json component.pins",-    "pins_sha256": "facc3e77172c7565c1e4066e0d7898a802a3973b091b68aac5410c6ee5f18ee8"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "AVDD",-      "x": -4.54,-      "y": -2.6,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "2",-      "text": "BE_0",-      "x": -3.95,-      "y": -2.2,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "3",-      "text": "BE_1",-      "x": -3.95,-      "y": -1.8,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "4",-      "text": "TXE_N",-      "x": -3.95,-      "y": -1.4,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "5",-      "text": "RXF_N",-      "x": -3.95,-      "y": -1.0,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "6",-      "text": "SIWU_N",-      "x": -3.95,-      "y": -0.6,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "7",-      "text": "WR_N",-      "x": -3.95,-      "y": -0.2,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "8",-      "text": "RD_N",-      "x": -3.95,-      "y": 0.2,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "9",-      "text": "OE_N",-      "x": -3.95,-      "y": 0.6,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "10",-      "text": "RESET_N",-      "x": -3.95,-      "y": 1.0,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "11",-      "text": "WAKEUP_N",-      "x": -3.95,-      "y": 1.4,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "12",-      "text": "GPIO0",-      "x": -3.95,-      "y": 1.8,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "13",-      "text": "GPIO1",-      "x": -3.95,-      "y": 2.2,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "14",-      "text": "Reserved",-      "x": -3.95,-      "y": 2.6,-      "align": "right",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "15",-      "text": "VCC33",-      "x": -2.6,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "16",-      "text": "XI",-      "x": -2.2,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "17",-      "text": "XO",-      "x": -1.8,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "18",-      "text": "DP",-      "x": -1.4,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "19",-      "text": "VCC33",-      "x": -1.0,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "20",-      "text": "DM",-      "x": -0.6,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "21",-      "text": "RREF",-      "x": -0.2,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "22",-      "text": "VDDA",-      "x": 0.2,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "23",-      "text": "VD10",-      "x": 0.6,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "24",-      "text": "TODN",-      "x": 1.0,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "25",-      "text": "TODP",-      "x": 1.4,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "26",-      "text": "VD10",-      "x": 1.8,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "27",-      "text": "RIDN",-      "x": 2.2,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "28",-      "text": "RIDP",-      "x": 2.6,-      "y": 3.95,-      "align": "right",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "29",-      "text": "VBUS",-      "x": 3.95,-      "y": 2.6,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "30",-      "text": "VCC33",-      "x": 3.95,-      "y": 2.2,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "31",-      "text": "DV10",-      "x": 3.95,-      "y": 1.8,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "32",-      "text": "GND",-      "x": 3.95,-      "y": 1.4,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "33",-      "text": "DATA_0",-      "x": 3.95,-      "y": 1.0,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "34",-      "text": "DATA_1",-      "x": 3.95,-      "y": 0.6,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "35",-      "text": "DATA_2",-      "x": 3.95,-      "y": 0.2,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "36",-      "text": "DATA_3",-      "x": 3.95,-      "y": -0.2,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "37",-      "text": "VD10",-      "x": 3.95,-      "y": -0.6,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "38",-      "text": "VCCIO",-      "x": 3.95,-      "y": -1.0,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "39",-      "text": "DATA_4",-      "x": 3.95,-      "y": -1.4,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "40",-      "text": "DATA_5",-      "x": 3.95,-      "y": -1.8,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "41",-      "text": "DATA_6",-      "x": 3.95,-      "y": -2.2,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "42",-      "text": "DATA_7",-      "x": 3.95,-      "y": -2.6,-      "align": "left",-      "vertical": false,-      "h": 0.2-    },-    {-      "pad": "43",-      "text": "CLK",-      "x": 2.6,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "44",-      "text": "VCCIO",-      "x": 2.2,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "45",-      "text": "DATA_8",-      "x": 1.8,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "46",-      "text": "DATA_9",-      "x": 1.4,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "47",-      "text": "DATA_10",-      "x": 1.0,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "48",-      "text": "DATA_11",-      "x": 0.6,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "49",-      "text": "GND",-      "x": 0.2,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "50",-      "text": "VD10",-      "x": -0.2,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "51",-      "text": "GND",-      "x": -0.6,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "52",-      "text": "VCCIO",-      "x": -1.0,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "53",-      "text": "DATA_12",-      "x": -1.4,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "54",-      "text": "DATA_13",-      "x": -1.8,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "55",-      "text": "DATA_14",-      "x": -2.2,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    },-    {-      "pad": "56",-      "text": "DATA_15",-      "x": -2.6,-      "y": -3.95,-      "align": "left",-      "vertical": true,-      "h": 0.2-    }+ "spec": "adom-hero 1.4",+ "mpn": "FT600Q-B-T",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 57,+   "span_mm": 10.9,+   "dash_mm": 0.2725,+   "gap_mm": 0.1635,+   "pad_stroke_mm": 0.0654+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 9,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 56,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": false,+  "tolerance_mm": 0.616,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.5,+   3.5,+   -3.5,+   3.5   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -2.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -2.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -1.8-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -1.4-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -1.0-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -0.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        -0.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        0.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        0.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        1.0-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        1.4-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        1.8-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        2.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        -3.45,-        2.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        -2.6,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        -2.2,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        -1.8,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        -1.4,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        -1.0,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        -0.6,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        -0.2,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        0.2,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        0.6,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        1.0,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "25",-      "shape": "roundrect",-      "center_mm": [-        1.4,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "26",-      "shape": "roundrect",-      "center_mm": [-        1.8,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "27",-      "shape": "roundrect",-      "center_mm": [-        2.2,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "28",-      "shape": "roundrect",-      "center_mm": [-        2.6,-        3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "29",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        2.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "30",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        2.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "31",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        1.8-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "32",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        1.4-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "33",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        1.0-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "34",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        0.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "35",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        0.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "36",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -0.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "37",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -0.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "38",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -1.0-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "39",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -1.4-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "40",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -1.8-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "41",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -2.2-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "42",-      "shape": "roundrect",-      "center_mm": [-        3.45,-        -2.6-      ],-      "size_mm": [-        0.8,-        0.2-      ],-      "rot": 0.0-    },-    {-      "number": "43",-      "shape": "roundrect",-      "center_mm": [-        2.6,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "44",-      "shape": "roundrect",-      "center_mm": [-        2.2,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "45",-      "shape": "roundrect",-      "center_mm": [-        1.8,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "46",-      "shape": "roundrect",-      "center_mm": [-        1.4,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "47",-      "shape": "roundrect",-      "center_mm": [-        1.0,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "48",-      "shape": "roundrect",-      "center_mm": [-        0.6,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "49",-      "shape": "roundrect",-      "center_mm": [-        0.2,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "50",-      "shape": "roundrect",-      "center_mm": [-        -0.2,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "51",-      "shape": "roundrect",-      "center_mm": [-        -0.6,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "52",-      "shape": "roundrect",-      "center_mm": [-        -1.0,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "53",-      "shape": "roundrect",-      "center_mm": [-        -1.4,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "54",-      "shape": "roundrect",-      "center_mm": [-        -1.8,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "55",-      "shape": "roundrect",-      "center_mm": [-        -2.2,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "56",-      "shape": "roundrect",-      "center_mm": [-        -2.6,-        -3.45-      ],-      "size_mm": [-        0.2,-        0.8-      ],-      "rot": 0.0-    },-    {-      "number": "57",-      "shape": "rect",-      "center_mm": [-        0.0,-        0.0-      ],-      "size_mm": [-        4.0,-        4.0-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -3.85,+   3.85,+   -3.85,+   3.85+  ],+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "ft600q-b-t-etched.glb",+  "glb_sha256": "5fa9ef9985ab42a6bd1573397ead90ac10546e15fd47bae07ab55af7f096b5f9",+  "footprint": "ft600q-b-t.kicad_mod",+  "footprint_sha256": "4e36d21e58c32fd2c813872895be35a0d67d1c18b53206ff4c34824dd50b62ea",+  "pins": "page.json component.pins",+  "pins_sha256": "facc3e77172c7565c1e4066e0d7898a802a3973b091b68aac5410c6ee5f18ee8"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "AVDD",+   "x": -4.54,+   "y": -2.6,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "2",+   "text": "BE_0",+   "x": -3.95,+   "y": -2.2,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "3",+   "text": "BE_1",+   "x": -3.95,+   "y": -1.8,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "4",+   "text": "TXE_N",+   "x": -3.95,+   "y": -1.4,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "5",+   "text": "RXF_N",+   "x": -3.95,+   "y": -1.0,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "6",+   "text": "SIWU_N",+   "x": -3.95,+   "y": -0.6,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "7",+   "text": "WR_N",+   "x": -3.95,+   "y": -0.2,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "8",+   "text": "RD_N",+   "x": -3.95,+   "y": 0.2,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "9",+   "text": "OE_N",+   "x": -3.95,+   "y": 0.6,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "10",+   "text": "RESET_N",+   "x": -3.95,+   "y": 1.0,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "11",+   "text": "WAKEUP_N",+   "x": -3.95,+   "y": 1.4,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "12",+   "text": "GPIO0",+   "x": -3.95,+   "y": 1.8,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "13",+   "text": "GPIO1",+   "x": -3.95,+   "y": 2.2,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "14",+   "text": "Reserved",+   "x": -3.95,+   "y": 2.6,+   "align": "right",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "15",+   "text": "VCC33",+   "x": -2.6,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "16",+   "text": "XI",+   "x": -2.2,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "17",+   "text": "XO",+   "x": -1.8,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "18",+   "text": "DP",+   "x": -1.4,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "19",+   "text": "VCC33",+   "x": -1.0,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "20",+   "text": "DM",+   "x": -0.6,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "21",+   "text": "RREF",+   "x": -0.2,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "22",+   "text": "VDDA",+   "x": 0.2,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "23",+   "text": "VD10",+   "x": 0.6,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "24",+   "text": "TODN",+   "x": 1.0,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "25",+   "text": "TODP",+   "x": 1.4,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "26",+   "text": "VD10",+   "x": 1.8,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "27",+   "text": "RIDN",+   "x": 2.2,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "28",+   "text": "RIDP",+   "x": 2.6,+   "y": 3.95,+   "align": "right",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "29",+   "text": "VBUS",+   "x": 3.95,+   "y": 2.6,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "30",+   "text": "VCC33",+   "x": 3.95,+   "y": 2.2,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "31",+   "text": "DV10",+   "x": 3.95,+   "y": 1.8,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "32",+   "text": "GND",+   "x": 3.95,+   "y": 1.4,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "33",+   "text": "DATA_0",+   "x": 3.95,+   "y": 1.0,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "34",+   "text": "DATA_1",+   "x": 3.95,+   "y": 0.6,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "35",+   "text": "DATA_2",+   "x": 3.95,+   "y": 0.2,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "36",+   "text": "DATA_3",+   "x": 3.95,+   "y": -0.2,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "37",+   "text": "VD10",+   "x": 3.95,+   "y": -0.6,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "38",+   "text": "VCCIO",+   "x": 3.95,+   "y": -1.0,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "39",+   "text": "DATA_4",+   "x": 3.95,+   "y": -1.4,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "40",+   "text": "DATA_5",+   "x": 3.95,+   "y": -1.8,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "41",+   "text": "DATA_6",+   "x": 3.95,+   "y": -2.2,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "42",+   "text": "DATA_7",+   "x": 3.95,+   "y": -2.6,+   "align": "left",+   "vertical": false,+   "h": 0.2+  },+  {+   "pad": "43",+   "text": "CLK",+   "x": 2.6,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "44",+   "text": "VCCIO",+   "x": 2.2,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "45",+   "text": "DATA_8",+   "x": 1.8,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "46",+   "text": "DATA_9",+   "x": 1.4,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "47",+   "text": "DATA_10",+   "x": 1.0,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "48",+   "text": "DATA_11",+   "x": 0.6,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "49",+   "text": "GND",+   "x": 0.2,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "50",+   "text": "VD10",+   "x": -0.2,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "51",+   "text": "GND",+   "x": -0.6,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "52",+   "text": "VCCIO",+   "x": -1.0,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "53",+   "text": "DATA_12",+   "x": -1.4,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "54",+   "text": "DATA_13",+   "x": -1.8,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "55",+   "text": "DATA_14",+   "x": -2.2,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  },+  {+   "pad": "56",+   "text": "DATA_15",+   "x": -2.6,+   "y": -3.95,+   "align": "left",+   "vertical": true,+   "h": 0.2+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -2.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -2.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -1.8+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -1.4+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -1.0+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -0.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    -0.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    0.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    0.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    1.0+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    1.4+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    1.8+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    2.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    -3.45,+    2.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    -2.6,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    -2.2,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    -1.8,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    -1.4,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    -1.0,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    -0.6,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    -0.2,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    0.2,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    0.6,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    1.0,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "25",+   "shape": "roundrect",+   "center_mm": [+    1.4,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "26",+   "shape": "roundrect",+   "center_mm": [+    1.8,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "27",+   "shape": "roundrect",+   "center_mm": [+    2.2,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "28",+   "shape": "roundrect",+   "center_mm": [+    2.6,+    3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "29",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    2.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "30",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    2.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "31",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    1.8+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "32",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    1.4+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "33",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    1.0+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "34",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    0.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "35",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    0.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "36",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -0.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "37",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -0.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "38",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -1.0+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "39",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -1.4+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "40",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -1.8+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "41",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -2.2+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "42",+   "shape": "roundrect",+   "center_mm": [+    3.45,+    -2.6+   ],+   "size_mm": [+    0.8,+    0.2+   ],+   "rot": 0.0+  },+  {+   "number": "43",+   "shape": "roundrect",+   "center_mm": [+    2.6,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "44",+   "shape": "roundrect",+   "center_mm": [+    2.2,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "45",+   "shape": "roundrect",+   "center_mm": [+    1.8,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "46",+   "shape": "roundrect",+   "center_mm": [+    1.4,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "47",+   "shape": "roundrect",+   "center_mm": [+    1.0,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "48",+   "shape": "roundrect",+   "center_mm": [+    0.6,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "49",+   "shape": "roundrect",+   "center_mm": [+    0.2,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "50",+   "shape": "roundrect",+   "center_mm": [+    -0.2,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "51",+   "shape": "roundrect",+   "center_mm": [+    -0.6,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "52",+   "shape": "roundrect",+   "center_mm": [+    -1.0,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "53",+   "shape": "roundrect",+   "center_mm": [+    -1.4,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "54",+   "shape": "roundrect",+   "center_mm": [+    -1.8,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "55",+   "shape": "roundrect",+   "center_mm": [+    -2.2,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "56",+   "shape": "roundrect",+   "center_mm": [+    -2.6,+    -3.45+   ],+   "size_mm": [+    0.2,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "57",+   "shape": "rect",+   "center_mm": [+    0.0,+    0.0+   ],+   "size_mm": [+    4.0,+    4.0+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ft600q-b-t.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet</description> <packages> <package name="QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm">   <description>QFN-56-1EP, 7 x 7 mm, 0.4 mm pitch</description>@@ -137,6 +137,7 @@ </packages> <symbols> <symbol name="FT600Q-B-T">+  <description>FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="38.1" x2="12.7" y2="38.1" width="0.254" layer="94"/>   <wire x1="12.7" y1="38.1" x2="12.7" y2="-38.1" width="0.254" layer="94"/>   <wire x1="12.7" y1="-38.1" x2="-12.7" y2="-38.1" width="0.254" layer="94"/>@@ -204,7 +205,7 @@ </symbols> <devicesets> <deviceset name="FT600Q-B-T" prefix="U">-  <description></description>+  <description>FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="FT600Q-B-T" x="0" y="0"/>   </gates>@@ -269,7 +270,17 @@         <connect gate="G$1" pin="DV10" pad="31"/>         <connect gate="G$1" pin="VCC33@3" pad="30"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="FT600Q-B-T" constant="no"/>+          <attribute name="MANUFACTURER" value="FTDI CHIP" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/14ad50006d3f47709442a70c03b1a52e.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ft600q-b-t" constant="no"/>+          <attribute name="MOUSER_PN" value="895-FT600Q-B-T" constant="no"/>+          <attribute name="DIGIKEY_PN" value="768-1310-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C5252722" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+31−33
@@ -1,6 +1,6 @@ {   "slug": "ft600q-b-t",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,17 +54,15 @@       "mouser": "895-FT600Q-B-T"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:15:32Z",+      "checked_at": "2026-11-11T00:55:13Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "768-1310-ND",-        "status": "found",-        "lifecycle": "Discontinued at DigiKey"+        "status": "found"       },       "mouser": {         "pn": "895-FT600Q-B-T",-        "status": "found",-        "lifecycle": "End of Life"+        "status": "found"       }     },     "pins": [@@ -90,37 +88,37 @@         "number": "4",         "name": "TXE_N",         "type": "output",-        "description": "245 Synchronous FIFO mode: Transmit FIFO Empty output, write to the FIFO only when logic 0; Multi-Channel FIFO mode: optional Status Valid output."+        "description": "In 245 Synchronous FIFO mode, Transmit FIFO Empty indicates at least 1 byte of space is available and data should only be written while this signal is logic 0; in Multi-Channel FIFO mode it is an optional Status Valid output."       },       {         "number": "5",         "name": "RXF_N",         "type": "output",-        "description": "245 Synchronous FIFO mode: Receive FIFO Full output, read from the FIFO only when logic 0; Multi-Channel FIFO mode: Data Receive Acknowledge output."+        "description": "In 245 Synchronous FIFO mode, Receive FIFO Full indicates at least 1 byte of data is available and data should only be read while this signal is logic 0; in Multi-Channel FIFO mode it is the Data Receive Acknowledge output."       },       {         "number": "6",         "name": "SIWU_N",         "type": "input",-        "description": "Reserved; add external pull up in normal operation."+        "description": "Reserved; an external pull-up must be added for normal operation."       },       {         "number": "7",         "name": "WR_N",         "type": "input",-        "description": "245 Synchronous FIFO mode: Write Enable input, active low; Multi-Channel FIFO mode: Data Transaction Request input, active low."+        "description": "In 245 Synchronous FIFO mode this is the active-low Write Enable input; in Multi-Channel FIFO mode it is the active-low Data Transaction Request input."       },       {         "number": "8",         "name": "RD_N",         "type": "input",-        "description": "245 Synchronous FIFO mode: Read Enable input, active low."+        "description": "In 245 Synchronous FIFO mode this is the active-low Read Enable input."       },       {         "number": "9",         "name": "OE_N",         "type": "input",-        "description": "245 Synchronous FIFO mode: Data Output Enable input, active low."+        "description": "In 245 Synchronous FIFO mode this is the active-low Data Output Enable input."       },       {         "number": "10",@@ -132,25 +130,25 @@         "number": "11",         "name": "WAKEUP_N",         "type": "bidirectional",-        "description": "Suspend/remote wakeup pin, low by default when USB is active and high in suspend; driving it low in USB suspend generates a remote wakeup to the USB host."+        "description": "Suspend/remote wakeup pin, low by default when USB is active and high in USB suspend; driving it low in suspend generates a remote wakeup signal to the USB host."       },       {         "number": "12",         "name": "GPIO0",         "type": "bidirectional",-        "description": "Configurable GPIO port0."+        "description": "Configurable GPIO port 0, which is also sampled with GPIO1 at power-up to select the chip mode."       },       {         "number": "13",         "name": "GPIO1",         "type": "bidirectional",-        "description": "Configurable GPIO port1."+        "description": "Configurable GPIO port 1, which is also sampled with GPIO0 at power-up to select the chip mode."       },       {         "number": "14",         "name": "Reserved",         "type": "unconnected",-        "description": "Reserved, do not connect."+        "description": "Reserved; do not connect."       },       {         "number": "15",@@ -162,13 +160,13 @@         "number": "16",         "name": "XI",         "type": "input",-        "description": "Crystal input for the internal oscillator."+        "description": "Crystal input for the internal oscillator; a 30MHz ±20ppm crystal is recommended across XI and XO."       },       {         "number": "17",         "name": "XO",         "type": "output",-        "description": "Crystal output for the internal oscillator."+        "description": "Crystal output for the internal oscillator; the crystal must be connected across XI and XO, and XO cannot be tied to GND to use an oscillator instead."       },       {         "number": "18",@@ -192,7 +190,7 @@         "number": "21",         "name": "RREF",         "type": "input",-        "description": "PHY reference resistor input; connect a 1.6K Ω 1% resistor to ground to provide the reference voltage to the USB2 PHY."+        "description": "PHY reference resistor input; connect a 1.6kΩ 1% resistor to ground to provide the reference voltage to the USB2 PHY."       },       {         "number": "22",@@ -210,13 +208,13 @@         "number": "24",         "name": "TODN",         "type": "output",-        "description": "Super Speed USB transmitter differential pair (negative)."+        "description": "SuperSpeed USB transmitter differential pair (negative)."       },       {         "number": "25",         "name": "TODP",         "type": "output",-        "description": "Super Speed USB transmitter differential pair (positive)."+        "description": "SuperSpeed USB transmitter differential pair (positive)."       },       {         "number": "26",@@ -228,19 +226,19 @@         "number": "27",         "name": "RIDN",         "type": "input",-        "description": "Super Speed USB receiver differential pair (negative)."+        "description": "SuperSpeed USB receiver differential pair (negative)."       },       {         "number": "28",         "name": "RIDP",         "type": "input",-        "description": "Super Speed USB receiver differential pair (positive)."+        "description": "SuperSpeed USB receiver differential pair (positive)."       },       {         "number": "29",         "name": "VBUS",         "type": "power_in",-        "description": "USB BUS power input."+        "description": "USB bus power input."       },       {         "number": "30",@@ -252,7 +250,7 @@         "number": "31",         "name": "DV10",         "type": "power_out",-        "description": "+1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF cap to ground is recommended."+        "description": "+1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF capacitor to ground is recommended."       },       {         "number": "32",@@ -324,7 +322,7 @@         "number": "43",         "name": "CLK",         "type": "output",-        "description": "Parallel FIFO bus clock output to the FIFO bus master; frequency configurable as 66MHz or 100MHz for both FIFO bus modes."+        "description": "Parallel FIFO bus clock output to the FIFO bus master, configurable as 66MHz or 100MHz for both FIFO bus modes."       },       {         "number": "44",@@ -422,12 +420,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Table 3.1 lists four GND pins for QFN76 but only three for QFN56 (32, 49, 51). The QFN56 centre pad ; Power pins that share one name in Table 3.1 are listed individually here, using the QFN56 column of ",+          "extractor flagged: Figure 3.1 (QFN56 pin-out drawing) is an image and not present in the text; the pin-to-name mapping ; The FT600Q is the 16-bit QFN-56 variant, so DATA_16-31 and BE_2/BE_3 are QFN-76 only (N/A for QFN56); Pin 14 is listed in the datasheet as 'Reserved - Do not connect' (type NC); it is mapped to KiCad ty",           "exposed pad 57 added from the footprint"         ],-        "pages_sent": 23,-        "cost_usd": 0.1312,-        "at": "2026-11-10T07:15:16"+        "pages_sent": 33,+        "cost_usd": 0.1397,+        "at": "2026-11-11T00:54:55"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/14ad50006d3f47709442a70c03b1a52e.pdf",@@ -464,7 +462,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b42d9b0c7a8d55564f4e9bb74be3ab877d958a268411c07a496787496cfb1b99",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -482,8 +480,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "e589816873acfaee6856f446afff8c8f792d5fe7853ff3cbc2516858084b6e6f",-        "checked": "2026-11-10",+        "sha256": "b622f30c74624396d0ae5c99c43a3a1bbd6a6f9b144b59948cc786035c268431",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+34−34
@@ -4,7 +4,7 @@   "slug": "ft600q-b-t",   "title": "FT600Q-B-T",   "brief": "FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,17 +36,15 @@       "mouser": "895-FT600Q-B-T"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:15:32Z",+      "checked_at": "2026-11-11T00:55:13Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "768-1310-ND",-        "status": "found",-        "lifecycle": "Discontinued at DigiKey"+        "status": "found"       },       "mouser": {         "pn": "895-FT600Q-B-T",-        "status": "found",-        "lifecycle": "End of Life"+        "status": "found"       }     },     "pins": [@@ -72,37 +70,37 @@         "number": "4",         "name": "TXE_N",         "type": "output",-        "description": "245 Synchronous FIFO mode: Transmit FIFO Empty output, write to the FIFO only when logic 0; Multi-Channel FIFO mode: optional Status Valid output."+        "description": "In 245 Synchronous FIFO mode, Transmit FIFO Empty indicates at least 1 byte of space is available and data should only be written while this signal is logic 0; in Multi-Channel FIFO mode it is an optional Status Valid output."       },       {         "number": "5",         "name": "RXF_N",         "type": "output",-        "description": "245 Synchronous FIFO mode: Receive FIFO Full output, read from the FIFO only when logic 0; Multi-Channel FIFO mode: Data Receive Acknowledge output."+        "description": "In 245 Synchronous FIFO mode, Receive FIFO Full indicates at least 1 byte of data is available and data should only be read while this signal is logic 0; in Multi-Channel FIFO mode it is the Data Receive Acknowledge output."       },       {         "number": "6",         "name": "SIWU_N",         "type": "input",-        "description": "Reserved; add external pull up in normal operation."+        "description": "Reserved; an external pull-up must be added for normal operation."       },       {         "number": "7",         "name": "WR_N",         "type": "input",-        "description": "245 Synchronous FIFO mode: Write Enable input, active low; Multi-Channel FIFO mode: Data Transaction Request input, active low."+        "description": "In 245 Synchronous FIFO mode this is the active-low Write Enable input; in Multi-Channel FIFO mode it is the active-low Data Transaction Request input."       },       {         "number": "8",         "name": "RD_N",         "type": "input",-        "description": "245 Synchronous FIFO mode: Read Enable input, active low."+        "description": "In 245 Synchronous FIFO mode this is the active-low Read Enable input."       },       {         "number": "9",         "name": "OE_N",         "type": "input",-        "description": "245 Synchronous FIFO mode: Data Output Enable input, active low."+        "description": "In 245 Synchronous FIFO mode this is the active-low Data Output Enable input."       },       {         "number": "10",@@ -114,25 +112,25 @@         "number": "11",         "name": "WAKEUP_N",         "type": "bidirectional",-        "description": "Suspend/remote wakeup pin, low by default when USB is active and high in suspend; driving it low in USB suspend generates a remote wakeup to the USB host."+        "description": "Suspend/remote wakeup pin, low by default when USB is active and high in USB suspend; driving it low in suspend generates a remote wakeup signal to the USB host."       },       {         "number": "12",         "name": "GPIO0",         "type": "bidirectional",-        "description": "Configurable GPIO port0."+        "description": "Configurable GPIO port 0, which is also sampled with GPIO1 at power-up to select the chip mode."       },       {         "number": "13",         "name": "GPIO1",         "type": "bidirectional",-        "description": "Configurable GPIO port1."+        "description": "Configurable GPIO port 1, which is also sampled with GPIO0 at power-up to select the chip mode."       },       {         "number": "14",         "name": "Reserved",         "type": "unconnected",-        "description": "Reserved, do not connect."+        "description": "Reserved; do not connect."       },       {         "number": "15",@@ -144,13 +142,13 @@         "number": "16",         "name": "XI",         "type": "input",-        "description": "Crystal input for the internal oscillator."+        "description": "Crystal input for the internal oscillator; a 30MHz ±20ppm crystal is recommended across XI and XO."       },       {         "number": "17",         "name": "XO",         "type": "output",-        "description": "Crystal output for the internal oscillator."+        "description": "Crystal output for the internal oscillator; the crystal must be connected across XI and XO, and XO cannot be tied to GND to use an oscillator instead."       },       {         "number": "18",@@ -174,7 +172,7 @@         "number": "21",         "name": "RREF",         "type": "input",-        "description": "PHY reference resistor input; connect a 1.6K Ω 1% resistor to ground to provide the reference voltage to the USB2 PHY."+        "description": "PHY reference resistor input; connect a 1.6kΩ 1% resistor to ground to provide the reference voltage to the USB2 PHY."       },       {         "number": "22",@@ -192,13 +190,13 @@         "number": "24",         "name": "TODN",         "type": "output",-        "description": "Super Speed USB transmitter differential pair (negative)."+        "description": "SuperSpeed USB transmitter differential pair (negative)."       },       {         "number": "25",         "name": "TODP",         "type": "output",-        "description": "Super Speed USB transmitter differential pair (positive)."+        "description": "SuperSpeed USB transmitter differential pair (positive)."       },       {         "number": "26",@@ -210,19 +208,19 @@         "number": "27",         "name": "RIDN",         "type": "input",-        "description": "Super Speed USB receiver differential pair (negative)."+        "description": "SuperSpeed USB receiver differential pair (negative)."       },       {         "number": "28",         "name": "RIDP",         "type": "input",-        "description": "Super Speed USB receiver differential pair (positive)."+        "description": "SuperSpeed USB receiver differential pair (positive)."       },       {         "number": "29",         "name": "VBUS",         "type": "power_in",-        "description": "USB BUS power input."+        "description": "USB bus power input."       },       {         "number": "30",@@ -234,7 +232,7 @@         "number": "31",         "name": "DV10",         "type": "power_out",-        "description": "+1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF cap to ground is recommended."+        "description": "+1.0V power output from the internal LDO; connecting to VD10 and AVDD with a 4.7uF capacitor to ground is recommended."       },       {         "number": "32",@@ -306,7 +304,7 @@         "number": "43",         "name": "CLK",         "type": "output",-        "description": "Parallel FIFO bus clock output to the FIFO bus master; frequency configurable as 66MHz or 100MHz for both FIFO bus modes."+        "description": "Parallel FIFO bus clock output to the FIFO bus master, configurable as 66MHz or 100MHz for both FIFO bus modes."       },       {         "number": "44",@@ -404,12 +402,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Table 3.1 lists four GND pins for QFN76 but only three for QFN56 (32, 49, 51). The QFN56 centre pad ; Power pins that share one name in Table 3.1 are listed individually here, using the QFN56 column of ",+          "extractor flagged: Figure 3.1 (QFN56 pin-out drawing) is an image and not present in the text; the pin-to-name mapping ; The FT600Q is the 16-bit QFN-56 variant, so DATA_16-31 and BE_2/BE_3 are QFN-76 only (N/A for QFN56); Pin 14 is listed in the datasheet as 'Reserved - Do not connect' (type NC); it is mapped to KiCad ty",           "exposed pad 57 added from the footprint"         ],-        "pages_sent": 23,-        "cost_usd": 0.1312,-        "at": "2026-11-10T07:15:16"+        "pages_sent": 33,+        "cost_usd": 0.1397,+        "at": "2026-11-11T00:54:55"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/14ad50006d3f47709442a70c03b1a52e.pdf",@@ -446,7 +444,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b42d9b0c7a8d55564f4e9bb74be3ab877d958a268411c07a496787496cfb1b99",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -464,8 +462,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "e589816873acfaee6856f446afff8c8f792d5fe7853ff3cbc2516858084b6e6f",-        "checked": "2026-11-10",+        "sha256": "b622f30c74624396d0ae5c99c43a3a1bbd6a6f9b144b59948cc786035c268431",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -892,5 +890,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "FTDI CHIP Global Sourcing Parts, QFN-56(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file