component
FT4232HPQ-TRAY
Public Made by Adomby adom
FTDI USB ICs, QFN-68(8x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
4c2b862
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065
{
"schema_version": 1,
"type": "component",
"slug": "ft4232hpq-tray",
"title": "FT4232HPQ-TRAY",
"brief": "FTDI USB ICs, QFN-68(8x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"communication interface chip-uart-485-232",
"ft4232hpq-tray",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "FT4232HPQ-TRAY",
"manufacturer": "FTDI",
"package": "QFN-68(8x8)",
"pin_count": 69,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "USB ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d34897ca0410b94e89c92e93dc77d021.pdf",
"parts": {
"symbol": "ft4232hpq-tray.kicad_sym",
"footprint": "ft4232hpq-tray.kicad_mod",
"model_3d": "ft4232hpq-tray-hero.glb",
"model_3d_plain": "ft4232hpq-tray-etched.glb",
"model_3d_step": "ft4232hpq-tray-etched.step",
"model_3d_step_plain": "ft4232hpq-tray.step",
"lbr": "ft4232hpq-tray.lbr"
},
"distributor_links": {
"lcsc": "C3228693",
"digikey": "768-FT4232HPQ-TRAY-ND",
"mouser": "895-FT4232HPQ-TRAY"
},
"distributor_check": {
"checked_at": "2026-11-02T17:02:21Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "768-FT4232HPQ-TRAY-ND",
"status": "found"
},
"mouser": {
"pn": "895-FT4232HPQ-TRAY",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "EECLK",
"type": "output",
"description": "Clock signal to the EEPROM; tri-state during device reset, and outputs the EEPROM clock when not in reset."
},
{
"number": "2",
"name": "EEDATA",
"type": "bidirectional",
"description": "EEPROM data I/O; connect directly to EEPROM Data-In and to Data-Out via a 2.2K resistor, pull Data-Out to VCC via 10K, tri-state during device reset."
},
{
"number": "3",
"name": "TEST",
"type": "input",
"description": "IC test pin that should be connected to GND for normal operation."
},
{
"number": "4",
"name": "RESET#",
"type": "input",
"description": "Active-low reset input; tie to VCCIO (+3.3V) if not used."
},
{
"number": "5",
"name": "GPIO3",
"type": "bidirectional",
"description": "GPIO3 pin whose default function is an input with weak pull-down."
},
{
"number": "6",
"name": "ADBUS0",
"type": "bidirectional",
"description": "Channel A bit 0: TXD in UART mode, D0 in bit-bang mode, TCK/SK in MPSSE mode."
},
{
"number": "7",
"name": "ADBUS1",
"type": "bidirectional",
"description": "Channel A bit 1: RXD in UART mode, D1 in bit-bang mode, TDI/DO in MPSSE mode."
},
{
"number": "8",
"name": "VCORE",
"type": "power_in",
"description": "+1.2V core supply voltage input; connect to VREGOUT when using the internal regulator."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "10",
"name": "VCCIO",
"type": "power_in",
"description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device will fail."
},
{
"number": "11",
"name": "ADBUS2",
"type": "bidirectional",
"description": "Channel A bit 2: RTS# in UART mode, D2 in bit-bang mode, TDO/DI in MPSSE mode."
},
{
"number": "12",
"name": "ADBUS3",
"type": "bidirectional",
"description": "Channel A bit 3: CTS# in UART mode, D3 in bit-bang mode, TMS/CS in MPSSE mode."
},
{
"number": "13",
"name": "ADBUS4",
"type": "bidirectional",
"description": "Channel A bit 4: DTR# in UART mode, D4 in bit-bang mode, GPIOL0 in MPSSE mode."
},
{
"number": "14",
"name": "ADBUS5",
"type": "bidirectional",
"description": "Channel A bit 5: DSR# in UART mode, D5 in bit-bang mode, GPIOL1 in MPSSE mode."
},
{
"number": "15",
"name": "ADBUS6",
"type": "bidirectional",
"description": "Channel A bit 6: DCD# in UART mode, D6 in bit-bang mode, GPIOL2 in MPSSE mode."
},
{
"number": "16",
"name": "ADBUS7",
"type": "bidirectional",
"description": "Channel A bit 7: RI# or TXDEN (EEPROM selectable, default RI#) in UART mode, D7 in bit-bang mode, GPIOL3 in MPSSE mode."
},
{
"number": "17",
"name": "BDBUS0",
"type": "bidirectional",
"description": "Channel B bit 0: TXD in UART mode, D0 in bit-bang mode, TCK/SK in MPSSE mode."
},
{
"number": "18",
"name": "BDBUS1",
"type": "bidirectional",
"description": "Channel B bit 1: RXD in UART mode, D1 in bit-bang mode, TDI/DO in MPSSE mode."
},
{
"number": "19",
"name": "BDBUS2",
"type": "bidirectional",
"description": "Channel B bit 2: RTS# in UART mode, D2 in bit-bang mode, TDO/DI in MPSSE mode."
},
{
"number": "20",
"name": "BDBUS3",
"type": "bidirectional",
"description": "Channel B bit 3: CTS# in UART mode, D3 in bit-bang mode, TMS/CS in MPSSE mode."
},
{
"number": "21",
"name": "BDBUS4",
"type": "bidirectional",
"description": "Channel B bit 4: DTR# in UART mode, D4 in bit-bang mode, GPIOL0 in MPSSE mode."
},
{
"number": "22",
"name": "BDBUS5",
"type": "bidirectional",
"description": "Channel B bit 5: DSR# in UART mode, D5 in bit-bang mode, GPIOL1 in MPSSE mode."
},
{
"number": "23",
"name": "BDBUS6",
"type": "bidirectional",
"description": "Channel B bit 6: DCD# in UART mode, D6 in bit-bang mode, GPIOL2 in MPSSE mode."
},
{
"number": "24",
"name": "BDBUS7",
"type": "bidirectional",
"description": "Channel B bit 7: RI# or TXDEN (EEPROM selectable, default RI#) in UART mode, D7 in bit-bang mode, GPIOL3 in MPSSE mode."
},
{
"number": "25",
"name": "VCORE",
"type": "power_in",
"description": "+1.2V core supply voltage input; connect to VREGOUT when using the internal regulator."
},
{
"number": "26",
"name": "VCCIO",
"type": "power_in",
"description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device will fail."
},
{
"number": "27",
"name": "OSCI",
"type": "input",
"description": "Oscillator input; a 12 MHz crystal is connected to OSCI and OSCO."
},
{
"number": "28",
"name": "OSCO",
"type": "output",
"description": "Oscillator output; a 12 MHz crystal is connected to OSCI and OSCO."
},
{
"number": "29",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "30",
"name": "VREGIN",
"type": "power_in",
"description": "+3.3V input to the integrated 1.2V voltage regulator."
},
{
"number": "31",
"name": "VREGOUT",
"type": "power_out",
"description": "+1.2V integrated regulator output; connect to VCORE with a 3.3uF filter capacitor and do not use to power other circuits."
},
{
"number": "32",
"name": "FSOURCE",
"type": "power_in",
"description": "FSOURCE input pin for EFUSE; leave floating for normal operation."
},
{
"number": "33",
"name": "VPP",
"type": "power_in",
"description": "VPP input pin for EFUSE; leave floating for normal operation."
},
{
"number": "34",
"name": "CDBUS0",
"type": "bidirectional",
"description": "Channel C bit 0: TXD in UART mode or D0 in bit-bang mode."
},
{
"number": "35",
"name": "CDBUS1",
"type": "bidirectional",
"description": "Channel C bit 1: RXD in UART mode or D1 in bit-bang mode."
},
{
"number": "36",
"name": "CDBUS2",
"type": "bidirectional",
"description": "Channel C bit 2: RTS# in UART mode or D2 in bit-bang mode."
},
{
"number": "37",
"name": "CDBUS3",
"type": "bidirectional",
"description": "Channel C bit 3: CTS# in UART mode or D3 in bit-bang mode."
},
{
"number": "38",
"name": "CDBUS4",
"type": "bidirectional",
"description": "Channel C bit 4: DTR# in UART mode or D4 in bit-bang mode."
},
{
"number": "39",
"name": "VCCIO",
"type": "power_in",
"description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device will fail."
},
{
"number": "40",
"name": "CDBUS5",
"type": "bidirectional",
"description": "Channel C bit 5: DSR# in UART mode or D5 in bit-bang mode."
},
{
"number": "41",
"name": "CDBUS6",
"type": "bidirectional",
"description": "Channel C bit 6: DCD# in UART mode or D6 in bit-bang mode."
},
{
"number": "42",
"name": "CDBUS7",
"type": "bidirectional",
"description": "Channel C bit 7: RI# or TXDEN (EEPROM selectable, default RI#) in UART mode, or D7 in bit-bang mode."
},
{
"number": "43",
"name": "SUSPEND#",
"type": "output",
"description": "Active-low output that is low when USB is in suspend mode."
},
{
"number": "44",
"name": "VCORE",
"type": "power_in",
"description": "+1.2V core supply voltage input; connect to VREGOUT when using the internal regulator."
},
{
"number": "45",
"name": "DDBUS0",
"type": "bidirectional",
"description": "Channel D bit 0: TXD in UART mode or D0 in bit-bang mode."
},
{
"number": "46",
"name": "DDBUS1",
"type": "bidirectional",
"description": "Channel D bit 1: RXD in UART mode or D1 in bit-bang mode."
},
{
"number": "47",
"name": "DDBUS2",
"type": "bidirectional",
"description": "Channel D bit 2: RTS# in UART mode or D2 in bit-bang mode."
},
{
"number": "48",
"name": "DDBUS3",
"type": "bidirectional",
"description": "Channel D bit 3: CTS# in UART mode or D3 in bit-bang mode."
},
{
"number": "49",
"name": "DDBUS4",
"type": "bidirectional",
"description": "Channel D bit 4: DTR# in UART mode or D4 in bit-bang mode."
},
{
"number": "50",
"name": "DDBUS5",
"type": "bidirectional",
"description": "Channel D bit 5: DSR# in UART mode or D5 in bit-bang mode."
},
{
"number": "51",
"name": "VCCIO",
"type": "power_in",
"description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device will fail."
},
{
"number": "52",
"name": "DDBUS6",
"type": "bidirectional",
"description": "Channel D bit 6: DCD# in UART mode or D6 in bit-bang mode."
},
{
"number": "53",
"name": "DDBUS7",
"type": "bidirectional",
"description": "Channel D bit 7: RI# or TXDEN (EEPROM selectable, default RI#) in UART mode, or D7 in bit-bang mode."
},
{
"number": "54",
"name": "GPIO2",
"type": "bidirectional",
"description": "GPIO2 or I2C_INT# pin whose default function is GPIO2 input with weak pull-down."
},
{
"number": "55",
"name": "GPIO1",
"type": "bidirectional",
"description": "GPIO1 or I2C_SCL pin whose default function is GPIO1 input with weak pull-down."
},
{
"number": "56",
"name": "GPIO0",
"type": "bidirectional",
"description": "GPIO0 or I2C_SDA pin whose default function is GPIO0 input with weak pull-down."
},
{
"number": "57",
"name": "VCC_USB",
"type": "power_in",
"description": "+3.3V internal USB PHY supply input that cannot be connected directly to the USB supply; a +3.3V regulator is required and LC filtering is recommended."
},
{
"number": "58",
"name": "DM",
"type": "bidirectional",
"description": "USB data signal minus."
},
{
"number": "59",
"name": "DP",
"type": "bidirectional",
"description": "USB data signal plus."
},
{
"number": "60",
"name": "REF",
"type": "input",
"description": "Current reference input; connect via a 12K Ohm 1% resistor to GND."
},
{
"number": "61",
"name": "VCC_PD",
"type": "power_in",
"description": "+3.3V internal PD PHY power supply input."
},
{
"number": "62",
"name": "PD1_CC2",
"type": "bidirectional",
"description": "Analog I/O pin for the PD1 CC2 line."
},
{
"number": "63",
"name": "PD1_SVBUS",
"type": "input",
"description": "Analog input for scaled-down PD1 VBUS sensing; VBUS must be divided by 10 before this pin."
},
{
"number": "64",
"name": "PD1_VCONN",
"type": "power_in",
"description": "Power input for the PD1 VCONN power source; connect to 3.3V."
},
{
"number": "65",
"name": "PD1_CC1",
"type": "bidirectional",
"description": "Analog I/O pin for the PD1 CC1 line."
},
{
"number": "66",
"name": "VCORE",
"type": "power_in",
"description": "+1.2V core supply voltage input; connect to VREGOUT when using the internal regulator."
},
{
"number": "67",
"name": "PWREN#",
"type": "output",
"description": "Active-low power-enable output: 0 = normal operation, 1 = USB suspend or device not configured."
},
{
"number": "68",
"name": "EECS",
"type": "bidirectional",
"description": "EEPROM chip select, tri-state during device reset; pull to VCCIO via 10K if no EEPROM."
},
{
"number": "69",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin 51 is assigned to both VCCIO (Table 2) and DDBUS6 (Table 1, QFN-68 column). Pin 53 is not assign; The QFN-68 pinout figure (Figure 3, page 8) is not available as text. Pin assignments were compiled ",
"1/69 pins cited to the wrong page (name found elsewhere): ['52:DDBUS6@p14']"
],
"pages_sent": 19,
"cost_usd": 0.0565,
"at": "2026-11-02T17:02:02"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/d34897ca0410b94e89c92e93dc77d021.pdf",
"pages": 39,
"sha256": "4394e4c473a80dcf",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 69,
"described": 69,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft4232hpq-tray.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8,
8,
0.87
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7eecf1c3ff4cba11026f26e261e1c97e34bcb6b0239bc5c5d39464b2f4148e9c",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft4232hpq-tray-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8,
8,
0.87
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "fea6f707f53f6667ab64fd36dbbffcab1db963b243cad7bc6a166c023af48185",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "FTDI",
"Package": "QFN-68(8x8)",
"Category": "Communication Interface Chip/UART/485/232",
"Pins": "69"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "4394e4c473a80dcf01483daf5f0e9e734e54df417f3cd2eecd03a1d00630b3ef",
"rows": [
{
"name": "Storage Temperature",
"symbol": "",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "Ambient Operating Temperature (Power Applied)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 85,
"conditions": "Power Applied",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCORE Supply Voltage",
"symbol": "VCORE",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 2,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCCIO IO Voltage",
"symbol": "VCCIO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "DC Input Voltage – USBDP and USBDM",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.5,
"typ": null,
"max": 3.63,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "DC Input Voltage – High Impedance Bi-directional (powered from VCCIO)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 5.8,
"conditions": "powered from VCCIO",
"source_page": 27,
"source": "datasheet"
},
{
"name": "DC Input Voltage – All Other Inputs",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.5,
"typ": null,
"max": null,
"conditions": "max is + (VCCIO +0.5)",
"source_page": 27,
"source": "datasheet"
},
{
"name": "DC Output Current – Outputs",
"symbol": "",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 16,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCORE VCC Core Operating Supply Voltage",
"symbol": "VCORE",
"kind": "recommended_operating",
"unit": "V",
"min": 1.08,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCCIO Operating Supply Voltage",
"symbol": "VCCIO",
"kind": "recommended_operating",
"unit": "V",
"min": 2.97,
"typ": 3.3,
"max": 3.63,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VREGIN Voltage regulator Input",
"symbol": "VREGIN",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": 3.3,
"max": 3.6,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VREGOUT Voltage regulator Output",
"symbol": "VREGOUT",
"kind": "recommended_operating",
"unit": "V",
"min": 1.08,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 27,
"source": "datasheet"
},
{
"name": "Regulator Current",
"symbol": "Ireg",
"kind": "electrical",
"unit": "mA",
"min": 21.11,
"typ": null,
"max": 150,
"conditions": "VREGIN +3.3V and data transfer with 12Mbps",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VREGIN Suspend Supply Current",
"symbol": "Icc1s",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 1.64,
"max": null,
"conditions": "USB Suspend",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCC_USB operating supply current",
"symbol": "I_vcd_usb",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 22.7,
"max": null,
"conditions": "Data transfer with 12Mbps",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCC_IO operating supply current",
"symbol": "I_vccio",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.87,
"max": null,
"conditions": "Data transfer with 12Mbps",
"source_page": 27,
"source": "datasheet"
},
{
"name": "VCC_PD suspend supply current",
"symbol": "I_vcc_pd",
"kind": "electrical",
"unit": "uA",
"min": null,
"typ": 209,
"max": null,
"conditions": "PD suspend",
"source_page": 27,
"source": "datasheet"
},
{
"name": "Output Voltage High",
"symbol": "Voh",
"kind": "electrical",
"unit": "V",
"min": 2.4,
"typ": 3.14,
"max": null,
"conditions": "Ioh = +/-2mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Output Voltage High",
"symbol": "Voh",
"kind": "electrical",
"unit": "V",
"min": 3.2,
"typ": null,
"max": null,
"conditions": "I/O Drive strength* = 8mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Output Voltage High",
"symbol": "Voh",
"kind": "electrical",
"unit": "V",
"min": 3.22,
"typ": null,
"max": null,
"conditions": "I/O Drive strength* = 12mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Output Voltage Low",
"symbol": "Vol",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": 0.18,
"max": 0.4,
"conditions": "Iol = +/-2mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Output Voltage Low",
"symbol": "Vol",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.12,
"conditions": "I/O Drive strength* = 8mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Output Voltage Low",
"symbol": "Vol",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.08,
"conditions": "I/O Drive strength* = 12mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Output Voltage Low",
"symbol": "Vol",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.07,
"conditions": "I/O Drive strength* = 16mA",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Input low Switching Threshold",
"symbol": "Vil",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "LVTTL",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Input High Switching Threshold",
"symbol": "Vih",
"kind": "electrical",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "LVTTL",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Schmitt trigger negative going threshold voltage",
"symbol": "Vt-",
"kind": "electrical",
"unit": "V",
"min": 0.8,
"typ": 1.1,
"max": null,
"conditions": "",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Schmitt trigger positive going threshold voltage",
"symbol": "Vt+",
"kind": "electrical",
"unit": "V",
"min": 1.6,
"typ": null,
"max": 2,
"conditions": "",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Input pull-up resistance",
"symbol": "Rpu",
"kind": "electrical",
"unit": "KΩ",
"min": 40,
"typ": 75,
"max": 190,
"conditions": "Vin = 0",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Input pull-down resistance",
"symbol": "Rpd",
"kind": "electrical",
"unit": "KΩ",
"min": 40,
"typ": 75,
"max": 190,
"conditions": "Vin =VCCIO",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Input Leakage Current",
"symbol": "Iin",
"kind": "electrical",
"unit": "μA",
"min": 15,
"typ": 45,
"max": 85,
"conditions": "Vin = 0",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Tri-state output leakage current",
"symbol": "Ioz",
"kind": "electrical",
"unit": "μA",
"min": -10,
"typ": null,
"max": 10,
"conditions": "Vin = 5.5V or 0",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Human Body Model (HBM)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "kV",
"min": -2,
"typ": null,
"max": 2,
"conditions": "ANSI/ESDA/JEDEC JS-001 Class 2",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Machine Mode (MM)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -200,
"typ": null,
"max": 200,
"conditions": "JEDEC EIA/JESD22-A115-C, Class B",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Charge Device Model (CDM)",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -500,
"typ": null,
"max": 500,
"conditions": "ANSI/ESDA/JEDEC JS-002, JEDEC JESD22-C101-D Class-III",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Latch-up",
"symbol": "",
"kind": "absolute_maximum",
"unit": "mA",
"min": -200,
"typ": null,
"max": 200,
"conditions": "JEDEC STANDARD EIA/JESD78, Trigger Class-II",
"source_page": 28,
"source": "datasheet"
},
{
"name": "TJ Junction Temperature (FT4232HPQ)",
"symbol": "TJ",
"kind": "thermal",
"unit": "°C",
"min": -40,
"typ": 25,
"max": 125,
"conditions": "FT4233HPL/FT4233HPQ/FT4232HPQ",
"source_page": 29,
"source": "datasheet"
},
{
"name": "ѲJA Thermal Resistance Junction-to-Ambient (FT4232HPQ)",
"symbol": "ѲJA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 23.65,
"max": null,
"conditions": "Preliminary data",
"source_page": 29,
"source": "datasheet"
},
{
"name": "ѲJC Thermal Resistance Junction-to-Case (FT4232HPQ)",
"symbol": "ѲJC",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 9.35,
"max": null,
"conditions": "Preliminary data",
"source_page": 29,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ft4232hpq-tray"
],
"discovery_pitch": "FT4232HPQ-TRAY (FTDI) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft4232hpq-tray.kicad_sym",
"ft4232hpq-tray.kicad_mod",
"ft4232hpq-tray.glb",
"ft4232hpq-tray.step",
"ft4232hpq-tray.lbr",
"docs/hero.png",
"docs/ft4232hpq-tray-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft4232hpq-tray-hero.glb",
"ft4232hpq-tray-hero.overlay.json",
"ft4232hpq-tray-etched.glb"
],
"visibility": {
"public": true
}
}