main
History Download
Ray Publish 0.1.0 e89ba7c

FT4222HQ-D-T

FTDI · Interface - Specialized · VQFN-32(5x5)

FT4222HQ-D-T from FTDI, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DEBUGGER bidirectional Debugging pin that should be reserved and tied high.
2 STEST_RSTN input Chip reset input for test mode, active low, which should be reserved and tied high.
3 RESETN input Chip reset input for non-test mode operation, active low; it can be tied to VCCIO (+3.3V) if not used.
4 DCNF0 input Chip mode configuration selection bit 0, which together with DCNF1 selects one of the four chip configuration modes.
5 DCNF1 input Chip mode configuration selection bit 1, which together with DCNF0 selects one of the four chip configuration modes.
6 DGND power_in Digital ground.
7 VCCIO power_in Supply for all I/O ports at +3.3V, +2.5V or +1.8V, and must be connected to pin 25 when the I/O ports operate at 3.3V.
8 SCK bidirectional SPI interface clock, serial clock output in SPI master mode and serial clock input in SPI slave mode.
9 MISO bidirectional SPI master single mode serial data input, SPI dual/quad mode data bus bit 1, or SPI slave mode serial data output.
10 MOSI bidirectional SPI master single mode serial data output, SPI dual/quad mode data bus bit 0, or SPI slave mode serial data input.
11 IO2 bidirectional Quad SPI data bus bit 2.
12 IO3 bidirectional Quad SPI data bus bit 3.
13 GPIO0/SS1O/SCL bidirectional GPIO 0 by default, configurable as SPI master slave select 1 output or as I2C serial clock (SCL).
14 GPIO1/SS2O/SDA bidirectional GPIO 1 by default, configurable as SPI master slave select 2 output or as I2C serial data (SDA).
15 GPIO2/SS3O/SUSP_OUT bidirectional GPIO 2 by default, configurable as SPI master slave select 3 output or as USB suspend output indicator.
16 GPIO3/WAKEUP/INTR bidirectional GPIO 3 by default, configurable as USB remote wakeup input or as interrupt input.
17 SS0O output Slave select 0 output in SPI master mode.
18 XSCI input Crystal oscillator input, 12 MHz only.
19 XSCO output Crystal oscillator output, 12 MHz only.
20 UGND power_in USB analog ground.
21 RREF input USB peripheral reference input that requires a 12 kOhm ±1% resistor connected to GND.
22 DM bidirectional USB peripheral bidirectional DM data line.
23 DP bidirectional USB peripheral bidirectional DP data line.
24 UGND power_in USB analog ground.
25 VOUT3V3 power_out Internal +3.3V regulator output that may power VCCIO and must be connected to pin 26; when VCCIN is supplied with 3.3V it becomes a power input.
26 VCCIN power_in Supply input of +5.0V (or 3.3V) to the embedded regulator.
27 AGND power_in Analog ground.
28 DGND power_in Digital ground.
29 VPP power_in +6.5V supply for programming the embedded OTP memory, which should be kept floating or at 0V when not programming.
30 VBUS_DET input VBUS detection input that is tolerant of +5.0V.
31 BCD_DET output Battery charger detection indicator output that is active when connected to a dedicated charger port, with polarity configurable.
32 SS input SPI slave select input from the SPI master, active in SPI slave mode and must be tied high when SPI master mode is enabled.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer FTDI
Package VQFN-32(5x5)
Category Communication Interface Chip/UART/485/232
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 23
Ambient Operating Temperature (Power Applied) -40 85 °C 23
VCCIN Supply Voltage -0.3 5.5 V 23
VCCIO IO Voltage -0.3 4 V 23
VPP Supply Voltage -0.25 6.5 0.25 V 23
DC Input Voltage, USBDP and USBDM -0.5 3.63 V 23
DC Input Voltage, High Impedance Bi-directional (powered from VCCIO) -0.3 V 23
DC Output Current, Outputs 100 mA 23
VCCIN Operating Supply Voltage VCC1 4.5 5 5.5 V VCCIN is supplied with 5V 24
VCCIN Operating Supply Voltage VCC1 2.97 3.3 3.63 V VCCIN is supplied with 3.3V 24
VCCIO Operating Supply Voltage VCC2 2.97 3.3 3.63 V VCCIO is supplied with 3.3V 24
VCCIO Operating Supply Voltage VCC2 2.25 2.5 2.75 V VCCIO is supplied with 2.5V 24
VCCIO Operating Supply Voltage VCC2 1.62 1.8 1.98 V VCCIO is supplied with 1.8V 24
Operating Supply Current Icc1 50 52 mA Normal Operation at 24MHz 24
Operating Supply Current Icc1 62 64 mA Normal Operation at 48MHz 24
Operating Supply Current Icc1 68 70 mA Normal Operation at 60MHz 24
Operating Supply Current Icc1 78 80 mA Normal Operation at 80MHz 24
Suspend Supply Current Icc2 375 460 μA USB Suspend when SPI Master 24
Suspend Supply Current Icc2 377 465 μA USB Suspend when SPI Slave 24
Suspend Supply Current Icc2 386 419 μA USB Suspend when I2C Master 24
Suspend Supply Current Icc2 388 456 μA USB Suspend when I2C Slave 24
3.3v regulator output 3V3 2.97 3.3 3.63 V VCCIN must be greater than 3V3 otherwise VOUT3V3 is an input which must be driven with 3.3V 24
Output Voltage High Voh 2.97 V Ioh = +/-2mA; I/O Drive strength* = 4mA 25
Output Voltage Low Vol 0 0.4 V Iol = +/-2mA; I/O Drive strength* = 4mA 25
Input low Switching Threshold Vil 0.8 V LVTTL 25
Input High Switching Threshold Vih 2 V LVTTL 25
Input pull-up resistance Rpu 40 75 190 KΩ Vin = 0 25
Input pull-down resistance Rpd 40 75 190 KΩ Vin =VCCIO 25
Input Leakage Current Iin -10 10 μA Vin = 0 25
Tri-state output leakage current Ioz -10 10 μA Vin = 5.5V or 0 25
Output Voltage High Voh 2.25 V Ioh = +/-2mA; I/O Drive strength* = 4mA 26
Output Voltage Low Vol 0 0.4 V Iol = +/-2mA; I/O Drive strength* = 4mA 26
Input low Switching Threshold Vil 0.8 V LVTTL 26
Input High Switching Threshold Vih 1.7 V LVTTL 26
Input pull-up resistance Rpu 40 75 190 KΩ Vin = 0 26
Input pull-down resistance Rpd 40 75 190 KΩ Vin =VCCIO 26
Input Leakage Current Iin -10 10 μA Vin = 0 26
Tri-state output leakage current Ioz -10 10 μA Vin = 5.5V or 0 26
Output Voltage High Voh 1.62 V Ioh = +/-2mA; I/O Drive strength* = 4mA 27
Output Voltage Low Vol 0 0.4 V Iol = +/-2mA; I/O Drive strength* = 4mA 27
Input low Switching Threshold Vil 0.63 V LVTTL 27
Input High Switching Threshold Vih 1.17 V LVTTL 27
Input pull-up resistance Rpu 40 75 190 KΩ Vin = 0 27
Input pull-down resistance Rpd 40 75 190 KΩ Vin =VCCIO 27
Input Leakage Current Iin -10 10 μA Vin = 0 27
Tri-state output leakage current Ioz -10 10 μA Vin = 5.5V or 0 27
PHY Operating Supply Voltage VPHY, VPLL 3 3.3 3.6 V 3.3V I/O 28
PHY Operating Supply Current ICCPHY 30 60 mA High-speed operation at 480 MHz 28
PHY Suspend Supply Current ICCPHY(susp) 210 250 μA USB Suspend 28
High Speed Differential input voltage sensitivity VHSDIFF 300 mV Measure at the connection of an application circuit 28
Full Speed Differential input voltage sensitivity VDI 0.2 V VI(DP), VI(DM) 28
Differential common mode voltage range of full speed data signalling VCM 0.8 2.5 V 28
Full Speed Low-level output voltage VOLPHY 0 0.3 V 29
Full Speed High-level output voltage VOHPHY 2.8 3.6 V 29

CAD (KiCad official)

  • Symbol: FT4222HQ-D-T
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: ft4222hq-d-t-etched.step / ft4222hq-d-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft4222hq-d-t.step / ft4222hq-d-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FTDI datasheet (47 pp, sha256 d109323d99285cfe, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF