component
FT260Q-T
Public Made by Adomby adom
FTDI USB ICs, WQFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342
{
"slug": "ft260q-t",
"version": "0.1.0",
"type": "component",
"description": "FTDI USB ICs, WQFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"ft260q-t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft260q-t.kicad_sym",
"ft260q-t.kicad_mod",
"ft260q-t.glb",
"ft260q-t.step",
"ft260q-t.lbr",
"docs/hero.png",
"docs/ft260q-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft260q-t-hero.glb",
"ft260q-t-hero.overlay.json",
"ft260q-t-etched.glb"
],
"component": {
"mpn": "FT260Q-T",
"manufacturer": "FTDI",
"package": "WQFN-28-EP(5x5)",
"pin_count": 29,
"category": "Interface ICs",
"subcategory": "USB ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/279c6813802bd9f8f15d5b2b9ff8d5ab.pdf",
"parts": {
"symbol": "ft260q-t.kicad_sym",
"footprint": "ft260q-t.kicad_mod",
"model_3d": "ft260q-t-hero.glb",
"model_3d_plain": "ft260q-t-etched.glb",
"model_3d_step": "ft260q-t-etched.step",
"model_3d_step_plain": "ft260q-t.step",
"lbr": "ft260q-t.lbr"
},
"distributor_links": {
"lcsc": "C1521550",
"digikey": "768-1268-ND",
"mouser": "895-FT260Q-T"
},
"distributor_check": {
"checked_at": "2026-10-30T12:02:51Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "768-1268-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "895-FT260Q-T",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "DEBUGGER",
"type": "bidirectional",
"description": "Debugging pin that should be reserved and tied high."
},
{
"number": "2",
"name": "STEST_RSTN",
"type": "input",
"description": "Active-low chip reset input for test mode; should be reserved and tied high."
},
{
"number": "3",
"name": "RESETN",
"type": "input",
"description": "Active-low chip reset input; can be tied high if external reset function is not required."
},
{
"number": "4",
"name": "DCNF0",
"type": "input",
"description": "Device interface configuration selection bit-0 for the HID interface selection (see Section 5.1)."
},
{
"number": "5",
"name": "DCNF1",
"type": "input",
"description": "Device interface configuration selection bit-1 for the HID interface selection (see Section 5.1)."
},
{
"number": "6",
"name": "VCCIO",
"type": "power_in",
"description": "+3.3V/2.5V/1.8V supply voltage for all I/O ports; connect to VOUT3V3 when I/O ports work at 3.3V."
},
{
"number": "7",
"name": "DIO0",
"type": "bidirectional",
"description": "Digital I/O pin 0 configurable via eFUSE or EEPROM as TX_ACTIVE (default UART transmit-active indicator), TX_LED or GPIOA."
},
{
"number": "8",
"name": "DIO1",
"type": "bidirectional",
"description": "Digital I/O pin 1, default GPIOB, or RTSN request-to-send handshake enabled via USB command for the UART."
},
{
"number": "9",
"name": "DIO2",
"type": "bidirectional",
"description": "Digital I/O pin 2, default GPIOE, or CTSN clear-to-send handshake enabled via USB command for the UART."
},
{
"number": "10",
"name": "DIO3",
"type": "bidirectional",
"description": "Digital I/O pin 3, RXD UART receive data input by default when UART is selected via DCNF1/DCNF0, otherwise GPIOC."
},
{
"number": "11",
"name": "DIO4",
"type": "bidirectional",
"description": "Digital I/O pin 4, TXD UART transmit data output by default when UART is selected via DCNF1/DCNF0, otherwise GPIOD."
},
{
"number": "12",
"name": "DIO5",
"type": "bidirectional",
"description": "Digital I/O pin 5, default I2C SCL open-drain serial clock, or GPIO0 enabled via USB command."
},
{
"number": "13",
"name": "DIO6",
"type": "bidirectional",
"description": "Digital I/O pin 6, default I2C SDA open-drain serial data, or GPIO1 enabled via USB command."
},
{
"number": "14",
"name": "DIO7",
"type": "bidirectional",
"description": "Digital I/O pin 7 configurable via eFUSE or EEPROM as SUSPOUT_N (default, active-low USB suspend indicator), PWREN_N or GPIO2."
},
{
"number": "15",
"name": "DIO8",
"type": "bidirectional",
"description": "Digital I/O pin 8, default INTRIN external interrupt input, or WAKEUP USB remote wakeup input, or GPIO3."
},
{
"number": "16",
"name": "DIO9",
"type": "bidirectional",
"description": "Digital I/O pin 9, default GPIOF, or DTRN data-terminal-ready enabled via USB command for the UART."
},
{
"number": "17",
"name": "DIO10",
"type": "bidirectional",
"description": "Digital I/O pin 10, default GPIO4, or DCD data carrier detect enabled via USB command for the UART."
},
{
"number": "18",
"name": "DIO11",
"type": "bidirectional",
"description": "Digital I/O pin 11, default GPIO5, or RI ring indicator enabled via USB command, usable as an alternative USB wakeup source."
},
{
"number": "19",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "20",
"name": "DM",
"type": "bidirectional",
"description": "USB peripheral bidirectional DM line."
},
{
"number": "21",
"name": "DP",
"type": "bidirectional",
"description": "USB peripheral bidirectional DP line."
},
{
"number": "22",
"name": "VOUT3V3",
"type": "power_out",
"description": "+3.3V voltage output that may power VCCIO; when VCCIN is supplied with 3.3V it is a power input connected to pin 23."
},
{
"number": "23",
"name": "VCCIN",
"type": "power_in",
"description": "+5.0V (or 3.3V) supply input to the embedded regulator; with 3.3V, VOUT3V3 and VCCIO must also be driven from that 3.3V source."
},
{
"number": "24",
"name": "AGND",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "25",
"name": "FSOURCE",
"type": "power_in",
"description": "+3.8V supply for programming the embedded eFUSE; keep floating or at 0V when not programming."
},
{
"number": "26",
"name": "VBUS_DET",
"type": "input",
"description": "VBUS detection input, +5.0V tolerant."
},
{
"number": "27",
"name": "DIO12",
"type": "bidirectional",
"description": "Digital I/O pin 12 configurable via eFUSE or EEPROM as BCD_DET (default battery charger detection output), RX_LED, PWREN_N or GPIOG."
},
{
"number": "28",
"name": "DIO13",
"type": "bidirectional",
"description": "Digital I/O pin 13, default GPIOH, or DSRN data-set-ready enabled via USB command for the UART."
},
{
"number": "29",
"name": "EP",
"type": "power_in",
"description": "Centre pad internally connected to GND; connect to GND with no signal tracking on the top layer under it."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Exposed pad is not numbered in the datasheet; '29'/'EP' is an assumed designation. The datasheet tex; Pin-name function lists for multiplexed DIO pins come from the table text; the pin-type column in th; Pin 1 DEBUGGER is listed as I/O but should be tied high. Pin 15 description in the datasheet erroneo",
"1/29 pins cited to the wrong page (name found elsewhere): ['29:EP@p51']"
],
"pages_sent": 31,
"cost_usd": 0.2445,
"at": "2026-10-30T12:02:37"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/279c6813802bd9f8f15d5b2b9ff8d5ab.pdf",
"pages": 61,
"sha256": "30c3991b8697a00b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft260q-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft260q-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "053fbc5e26877a0a3b2e5c80e1c39bafd1bbc787e2a89a4757577fe8de3fc920",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "WQFN-28",
"source_page": 51,
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ft260q-t.step",
"verdict": "SKIP",
"reasons": [
"the datasheet dimensions give no height or body size to compare"
],
"by": "factory/package_fit.py"
}
}
}
}