component
FT24C512A-ESG-B
Public Made by Adomby adom
FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
99e8891
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240
{
"slug": "ft24c512a-esg-b",
"version": "0.1.0",
"type": "component",
"description": "FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"ft24c512a-esg-b",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft24c512a-esg-b.kicad_sym",
"ft24c512a-esg-b.kicad_mod",
"ft24c512a-esg-b.glb",
"ft24c512a-esg-b.step",
"ft24c512a-esg-b.lbr",
"docs/hero.png",
"docs/ft24c512a-esg-b-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft24c512a-esg-b-hero.glb",
"ft24c512a-esg-b-hero.overlay.json",
"ft24c512a-esg-b-etched.glb"
],
"component": {
"mpn": "FT24C512A-ESG-B",
"manufacturer": "FMD(Fremont Micro Devices)",
"package": "SOP-8",
"pin_count": 8,
"category": "Memory",
"subcategory": "EEPROM",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ae5e9ad01cb5786e7993d0408235ee5d.pdf",
"parts": {
"symbol": "ft24c512a-esg-b.kicad_sym",
"footprint": "ft24c512a-esg-b.kicad_mod",
"model_3d": "ft24c512a-esg-b-hero.glb",
"model_3d_plain": "ft24c512a-esg-b-etched.glb",
"model_3d_step": "ft24c512a-esg-b-etched.step",
"model_3d_step_plain": "ft24c512a-esg-b.step",
"lbr": "ft24c512a-esg-b.lbr"
},
"distributor_links": {
"lcsc": "C2921394"
},
"distributor_check": {
"checked_at": "2026-11-05T21:00:12Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "A0",
"type": "input",
"description": "Device address input that is hardwired to VIH or VIL to match the device address bits, and is recognized as VIL if left unconnected."
},
{
"number": "2",
"name": "A1",
"type": "input",
"description": "Device address input that is hardwired to VIH or VIL to match the device address bits, and is recognized as VIL if left unconnected."
},
{
"number": "3",
"name": "A2",
"type": "input",
"description": "Device address input that is hardwired to VIH or VIL to match the device address bits, and is recognized as VIL if left unconnected."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial data line, bi-directional and open drain output that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial clock input where the rising edge latches data into the EEPROM and the falling edge clocks data out."
},
{
"number": "7",
"name": "WP",
"type": "input",
"description": "Write protect input that disables all programming when connected to VIH or VCC, and allows programming when left unconnected or at VIL, with reads unaffected."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Power supply input for 1.8V to 5.5V operation, with a decoupling capacitor of no less than 10nF recommended."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Figure 1 (package drawing) is garbled in the text extraction. Pin numbers for A2, A1, A0 were taken "
],
"pages_sent": 18,
"cost_usd": 0.0592,
"at": "2026-11-05T20:59:56"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/ae5e9ad01cb5786e7993d0408235ee5d.pdf",
"pages": 18,
"sha256": "05f76c553315cebf",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft24c512a-esg-b.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft24c512a-esg-b-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "01bd96376bfabe00b58baf37df51579d186c975bdf3df491d602a11cae3b0504",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOP8",
"source_page": 14,
"D": {
"nom_mm": 4.9,
"range_mm": [
4.7,
5.1
]
},
"E1": {
"nom_mm": 3.9,
"range_mm": [
3.8,
4.0
]
},
"E": {
"nom_mm": 6.0,
"range_mm": [
5.8,
6.2
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.55,
"range_mm": [
1.35,
1.75
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ft24c512a-esg-b.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}