component
FT24C128A-TSR-B
Public Made by Adomby adom
FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
546c0a8
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192
{
"slug": "ft24c128a-tsr-b",
"version": "0.1.0",
"type": "component",
"description": "FMD(Fremont Micro Devices) EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"ft24c128a-tsr-b",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft24c128a-tsr-b.kicad_sym",
"ft24c128a-tsr-b.kicad_mod",
"ft24c128a-tsr-b.glb",
"ft24c128a-tsr-b.step",
"ft24c128a-tsr-b.lbr",
"docs/hero.png",
"docs/ft24c128a-tsr-b-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft24c128a-tsr-b-hero.glb",
"ft24c128a-tsr-b-hero.overlay.json",
"ft24c128a-tsr-b-etched.glb"
],
"component": {
"mpn": "FT24C128A-TSR-B",
"manufacturer": "FMD(Fremont Micro Devices)",
"package": "SOP-8",
"pin_count": 8,
"category": "Memory",
"subcategory": "EEPROM",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/58563ca27b3648ea166c0c61522147a5.pdf",
"parts": {
"symbol": "ft24c128a-tsr-b.kicad_sym",
"footprint": "ft24c128a-tsr-b.kicad_mod",
"model_3d": "ft24c128a-tsr-b-hero.glb",
"model_3d_plain": "ft24c128a-tsr-b-etched.glb",
"model_3d_step": "ft24c128a-tsr-b-etched.step",
"model_3d_step_plain": "ft24c128a-tsr-b.step",
"lbr": "ft24c128a-tsr-b.lbr"
},
"distributor_links": {
"lcsc": "C7466808"
},
"distributor_check": {
"checked_at": "2026-10-23T12:20:47Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "A0",
"type": "input",
"description": "Device address input that is hardwired to VIH or VIL to match the device address bit, and is internally recognized as VIL if left unconnected."
},
{
"number": "2",
"name": "A1",
"type": "input",
"description": "Device address input that is hardwired to VIH or VIL to match the device address bit, and is internally recognized as VIL if left unconnected."
},
{
"number": "3",
"name": "A2",
"type": "input",
"description": "Device address input that is hardwired to VIH or VIL to match the device address bit, and is internally recognized as VIL if left unconnected."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device; input voltage on any pin is rated -0.3V to VCC + 0.3V relative to ground."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Bi-directional serial data line with an open-drain output that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial clock input where the rising edge latches data into the EEPROM and the falling edge clocks data out, supporting up to 1 MHz at 2.5-5.5V and 400 kHz at 1.8V."
},
{
"number": "7",
"name": "WP",
"type": "input",
"description": "Write protect input that disables all programming when connected to VIH or VCC and allows programming when left unconnected or at VIL, without affecting read operations."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Power supply pin with an operating range of 1.8V to 5.5V and a decoupling capacitor of at least 10nF recommended."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin diagram on page 2 was extracted as text without a clear pin-to-number mapping. The right-sid; The pin function table lists an NC (No-Connect) pin, but the extracted diagram does not show which p; The datasheet gives no pin-specific VCC description. The description for pin 8 combines the VCC rang"
],
"pages_sent": 17,
"cost_usd": 0.1195,
"at": "2026-10-23T12:20:36"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/58563ca27b3648ea166c0c61522147a5.pdf",
"pages": 17,
"sha256": "1e278f10b22d7c70",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft24c128a-tsr-b.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft24c128a-tsr-b-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ab64d573ba0f2c1da32865f7924f810c8413536b73d55fdc259567ae132855bb",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}