component
ft24c128a-esr-t
Public Made by Adomby adom
FMD Fremont Micro Devices EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
main
Ray
ft24c128a-esr-t: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC…
18d0d68
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "ft24c128a-esr-t",
"version": "0.1.0",
"type": "component",
"description": "FMD Fremont Micro Devices EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"ft24c128a-esr-t"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft24c128a-esr-t.kicad_sym",
"ft24c128a-esr-t.kicad_mod",
"ft24c128a-esr-t.glb",
"ft24c128a-esr-t.step",
"ft24c128a-esr-t.lbr",
"docs/hero.png",
"docs/ft24c128a-esr-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft24c128a-esr-t-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "FT24C128A-ESR-T",
"manufacturer": "FMD Fremont Micro Devices",
"package": "SOP-8",
"pin_count": 8,
"category": "EEPROM",
"parts": {
"symbol": "ft24c128a-esr-t.kicad_sym",
"footprint": "ft24c128a-esr-t.kicad_mod",
"model_3d": "ft24c128a-esr-t-etched.glb",
"model_3d_plain": "ft24c128a-esr-t.glb",
"model_3d_step": "ft24c128a-esr-t-etched.step",
"model_3d_step_plain": "ft24c128a-esr-t.step",
"lbr": "ft24c128a-esr-t.lbr"
},
"pins": [
{
"number": "1",
"name": "A0",
"type": "input",
"description": "Device address input bit 0. Hardwired to VIH or VIL to set the chip's 3-bit slave address (matches bit 5 of the 8-bit device address word 1010_A2A1A0_RW). Internally pulled to VIL if left unconnected."
},
{
"number": "2",
"name": "A1",
"type": "input",
"description": "Device address input bit 1. Hardwired to VIH or VIL to set the chip's slave address. Internally recognized as VIL if left unconnected."
},
{
"number": "3",
"name": "A2",
"type": "input",
"description": "Device address input bit 2. Hardwired to VIH or VIL to set the chip's slave address. Internally recognized as VIL if left unconnected."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground / VSS return for the device."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial data line for the 2-wire (I2C-compatible) bus. Open-drain bidirectional signal requiring an external pull-up resistor to VCC (typ. 1.3kΩ for AC characterization). Can be wire-ORed with other open-drain devices."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial clock input for the 2-wire bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Schmitt-trigger, filtered input."
},
{
"number": "7",
"name": "WP",
"type": "input",
"description": "Write Protect input. Tie to VIL (or leave unconnected) to allow programming of the EEPROM array; tie to VIH or VCC to disable all write operations. Read operations are unaffected by WP."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Positive supply voltage, 1.8V to 5.5V. Typical read current 0.4 mA and write current 2.0 mA at VCC = 5.0V, SCL = 100 kHz; standby current typically < 1µA."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C417367",
"digikey": "1219-1240-2-ND",
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T18:57:32Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "1219-1240-2-ND",
"status": "found"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "ft24c128a-esr-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft24c128a-esr-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7b31b7be8f49bcd769fc40fb9af2e44059994a35c2f1848e085832c8e779533e",
"checked": "2026-11-03",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}