main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ft24c02a-klr-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
ft24c02a-klr-t-etched.fit.json ft24c02a-klr-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ft24c02a-klr-t-etched.glb ft24c02a-klr-t: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
ft24c02a-klr-t-etched.step ft24c02a-klr-t: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
ft24c02a-klr-t.glb Publish 0.1.0 · Ray
ft24c02a-klr-t.kicad_mod Publish 0.1.0 · Ray
ft24c02a-klr-t.kicad_sym Publish 0.1.0 · Ray
ft24c02a-klr-t.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
ft24c02a-klr-t.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json ft24c02a-klr-t: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
README.md ft24c02a-klr-t: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

FT24C02A-KLR-T

FMD Fremont Micro Devices · EEPROM · SOT-23-5

FT24C02A-KLR-T from FMD Fremont Micro Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input Serial clock input for the 2-wire bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Schmitt-trigger, filtered input; supports 400 kHz at 1.8 V and 1 MHz at 2.5-5.5 V. Requires an external pull-up to VCC.
2 GND power_in Device ground reference (0 V).
3 SDA bidirectional Bi-directional serial data line. Open-drain output that can be wired-OR with other open-drain devices on the bus. Requires an external pull-up to VCC. Schmitt-trigger, filtered input for noise immunity.
4 VCC power_in Positive supply voltage, 1.8 V to 5.5 V. Requires a decoupling capacitor no smaller than 10 nF at the VCC pad. VCC must rise monotonically from GND at a slew rate between 0.1 V/ms and 0.05 V/us during power-up.
5 WP input Write-Protect input. WP = VIH (or tied to VCC) disables all programming (array write-protected); WP = VIL (or left unconnected, internally recognized as VIL) allows normal write operations. Read operations are unaffected. FMD recommends tying WP to a known state through <=10 kOhm to avoid capacitive coupling.

Key specifications

Parameter Value
Manufacturer FMD Fremont Micro Devices
Package SOT-23-5
Category Memory
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • FT24C02A-KLR-T
  • FT24C02A-KLR-TKLG-T
  • FT24C02A-KLR-TKPR-T
  • FT24C02A-KLR-TKPG-T
  • FT24C02A-KLR-TKDR-B
  • FT24C02A-KLR-TKDG-B
  • FT24C02A-KLR-TKSR-B
  • FT24C02A-KLR-TKSR-T
  • FT24C02A-KLR-TKSG-B
  • FT24C02A-KLR-TKSG-T
  • FT24C02A-KLR-TKMR-B
  • FT24C02A-KLR-TKMR-T
  • FT24C02A-KLR-TKMG-B
  • FT24C02A-KLR-TKMG-T
  • FT24C02A-KLR-TKTR-B
  • FT24C02A-KLR-TKTR-T
  • FT24C02A-KLR-TKTG-B
  • FT24C02A-KLR-TKTG-T
  • FT24C02A-KLR-TKNR-T
  • FT24C02A-KLR-TKNG-T

CAD (KiCad official)

  • Symbol: FT24C02A-KLR-T
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ft24c02a-klr-t-etched.step / ft24c02a-klr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft24c02a-klr-t.step / ft24c02a-klr-t.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ft24c02a-klr-t.step 85 KB You want the bare part, or you mark your own boards.
ft24c02a-klr-t-etched.step 1.9 MB You want the part with FT24C02A-KLR-T already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 501 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FMD Fremont Micro Devices datasheet (21 pp, sha256 c5ccb3b10da2266a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF