component
FT245RNL-REEL
Public Made by Adomby adom
FTDI USB Converters, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
30a5204
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356
{
"slug": "ft245rnl-reel",
"version": "0.1.0",
"type": "component",
"description": "FTDI USB Converters, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip",
"ft245rnl-reel",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft245rnl-reel.kicad_sym",
"ft245rnl-reel.kicad_mod",
"ft245rnl-reel.glb",
"ft245rnl-reel.step",
"ft245rnl-reel.lbr",
"docs/hero.png",
"docs/ft245rnl-reel-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft245rnl-reel-hero.glb",
"ft245rnl-reel-hero.overlay.json",
"ft245rnl-reel-etched.glb"
],
"component": {
"mpn": "FT245RNL-REEL",
"manufacturer": "FTDI",
"package": "SSOP-28",
"pin_count": 28,
"category": "Communication Interface Chip",
"subcategory": "USB Converters",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/28acf36011a776f66b6a60c85a770409.pdf",
"parts": {
"symbol": "ft245rnl-reel.kicad_sym",
"footprint": "ft245rnl-reel.kicad_mod",
"model_3d": "ft245rnl-reel-hero.glb",
"model_3d_plain": "ft245rnl-reel-etched.glb",
"model_3d_step": "ft245rnl-reel-etched.step",
"model_3d_step_plain": "ft245rnl-reel.step",
"lbr": "ft245rnl-reel.lbr"
},
"distributor_links": {
"lcsc": "C6558294",
"digikey": "768-FT245RNL-REELTR-ND",
"mouser": "895-FT245RNL-REEL"
},
"distributor_check": {
"checked_at": "2026-10-28T19:02:51Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "768-FT245RNL-REELTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "895-FT245RNL-REEL",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "D0",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 0."
},
{
"number": "2",
"name": "D4",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 4."
},
{
"number": "3",
"name": "D2",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 2."
},
{
"number": "4",
"name": "VCCIO",
"type": "power_in",
"description": "+1.8V to +5.25V supply to the FIFO interface group pins; connect to 3V3OUT for +3.3V levels or to VCC for 5V CMOS levels in bus powered designs."
},
{
"number": "5",
"name": "D1",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 1."
},
{
"number": "6",
"name": "D7",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 7."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device ground supply pin."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "9",
"name": "D5",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 5."
},
{
"number": "10",
"name": "D6",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 6."
},
{
"number": "11",
"name": "D3",
"type": "bidirectional",
"description": "FIFO Data Bus Bit 3."
},
{
"number": "12",
"name": "PWREN#",
"type": "output",
"description": "Goes low after the device is configured by USB, then high during USB suspend; should be pulled to VCCIO with a 10kΩ resistor when used to control an external P-channel MOSFET power switch."
},
{
"number": "13",
"name": "RD#",
"type": "input",
"description": "Enables the current FIFO data byte on D0...D7 when low and fetches the next byte from the receive FIFO buffer when RD# goes from high to low."
},
{
"number": "14",
"name": "WR",
"type": "input",
"description": "Writes the data byte on D0...D7 into the transmit FIFO buffer when WR goes from high to low."
},
{
"number": "15",
"name": "USBDP",
"type": "bidirectional",
"description": "USB Data Signal Plus, incorporating internal series resistor and 1.5kΩ pull up resistor to 3.3V."
},
{
"number": "16",
"name": "USBDM",
"type": "bidirectional",
"description": "USB Data Signal Minus, incorporating internal series resistor."
},
{
"number": "17",
"name": "3V3OUT",
"type": "power_out",
"description": "+3.3V output from the integrated LDO regulator, decoupled with 100nF, able to supply up to 50mA to external logic and usable to supply VCCIO."
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Device ground supply pin."
},
{
"number": "19",
"name": "RESET#",
"type": "input",
"description": "Active low reset pin for an external device to reset the FT245RN; can be left unconnected or pulled up to VCC if not required."
},
{
"number": "20",
"name": "VCC",
"type": "power_in",
"description": "+3.3V to +5.25V supply to the device core."
},
{
"number": "21",
"name": "GND",
"type": "power_in",
"description": "Device ground supply pin."
},
{
"number": "22",
"name": "TXE#",
"type": "output",
"description": "When high, do not write data into the FIFO; when low, data can be written by strobing WR high then low; tri-state during reset."
},
{
"number": "23",
"name": "RXF#",
"type": "output",
"description": "When high, do not read from the FIFO; when low, data is available to read by strobing RD# low then high; tri-state during reset and becomes an input during suspend if Remote Wakeup is enabled."
},
{
"number": "24",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "25",
"name": "AGND",
"type": "power_in",
"description": "Device analogue ground supply for the internal clock multiplier."
},
{
"number": "26",
"name": "TEST",
"type": "input",
"description": "Puts the device into IC test mode; must be tied to GND for normal operation, otherwise the device will appear to fail."
},
{
"number": "27",
"name": "OSCI",
"type": "input",
"description": "Input 12MHz oscillator cell; optional and can be left unconnected for normal operation."
},
{
"number": "28",
"name": "OSCO",
"type": "output",
"description": "Output from 12MHz oscillator cell; optional and can be left unconnected for normal operation if the internal oscillator is used."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The SSOP-28 pin table prints pin 23 as 'RXF' without the '#', while the function is active low and t; Pin types for the regulator output (3V3OUT) and the power/ground pins are mapped to KiCad classes (p; Pin 12 PWREN#, pins 22 and 23 are printed as 'Output' and pins 13 and 14 as 'Input'; the datasheet a"
],
"pages_sent": 18,
"cost_usd": 0.0803,
"at": "2026-10-28T19:02:35"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/28acf36011a776f66b6a60c85a770409.pdf",
"pages": 36,
"sha256": "45dc0b8b61dc4076",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft245rnl-reel.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft245rnl-reel-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ffc7d2c549b2aa8c86a453ca9c9b30ca72e7e56a0e019836e4c668d45cff42b9",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SSOP-28",
"source_page": 26,
"D": {
"nom_mm": 10.2,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 5.3,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 7.8,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ft245rnl-reel.step",
"verdict": "PASS",
"reasons": [
"body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}