component
FT240XS-R
Public Made by Adomby adom
FTDI USB ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+9866
README.mdadded+105@@ -0,0 +1,105 @@+# FT240XS-R++**FTDI** · USB ICs · SSOP-24-150mil++FT240XS-R from FTDI, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | D4 | bidirectional | FIFO data bus bit 4; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 2 | D2 | bidirectional | FIFO data bus bit 2; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 3 | VCCIO | power_in | 1V8 to 3V3 supply for the IO cells. |+| 4 | D1 | bidirectional | FIFO data bus bit 1; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 5 | D7 | bidirectional | FIFO data bus bit 7; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 6 | GND | power_in | Device ground supply pin. |+| 7 | D5 | bidirectional | FIFO data bus bit 5; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 8 | D6 | bidirectional | FIFO data bus bit 6; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 9 | D3 | bidirectional | FIFO data bus bit 3; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |+| 10 | SIWU# | input | Active low input used to flush the IC buffer back to the PC (Send Immediate) or as a wake-up signal when the PC is in suspend mode. |+| 11 | RD# | input | Enables the current FIFO data byte on D0...D7 when low, and fetches the next byte from the receive FIFO buffer when RD# goes from high to low. |+| 12 | WR | input | Writes the data byte on D0...D7 into the transmit FIFO buffer when WR goes from high to low. |+| 13 | USBDP | bidirectional | USB Data Signal Plus, incorporating a 1.5kΩ pull-up resistor to 3.3V. |+| 14 | USBDM | bidirectional | USB Data Signal Minus. |+| 15 | 3V3OUT | power_out | 3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be connected to pin 18. |+| 16 | RESET# | input | Active low reset input that can be driven by an external device to reset the FT240X; if not required it can be left unconnected or pulled up to VCC. |+| 17 | VCORE | power_out | +1V8 output that may be left unterminated. |+| 18 | VCC | power_in | +5V (or 3V3) supply to the device core; if VCC is 3V3, 3V3OUT must also be driven with a 3V3 input. |+| 19 | GND | power_in | Device ground supply pin. |+| 20 | TXE# | output | When high do not write data into the FIFO; when low, data can be written by strobing WR high then low; tristate during reset. |+| 21 | RXF# | output | When low, data is available to read by strobing RD# low then high; tristate during reset, and becomes an input for USB remote wake-up during suspend if that option is enabled. |+| 22 | CBUS6 | bidirectional | Configurable CBUS I/O pin whose function is set in the internal MTP memory (see CBUS Signal Options, Table 3.9). |+| 23 | CBUS5 | bidirectional | Configurable CBUS I/O pin whose function is set in the internal MTP memory (see CBUS Signal Options, Table 3.9). |+| 24 | D0 | bidirectional | FIFO data bus bit 0; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | FTDI |+| Package | SSOP-24-150mil |+| Category | Interface ICs |+| Pins | 24 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Storage Temperature | | -65 | | 150 | °C | | 16 |+| Ambient Operating Temperature (Power Applied) | | -40 | | 85 | °C | | 16 |+| VCC Supply Voltage | | -0.3 | | 5.5 | V | | 16 |+| VCCIO IO Voltage | | -0.3 | | 4 | V | | 16 |+| DC Input Voltage, USBDP and USBDM | | -0.5 | | 3.63 | V | | 16 |+| DC Input Voltage, High Impedance Bi-directional (powered from VCCIO) | | -0.3 | | 5.8 | V | | 16 |+| DC Output Current, Outputs | | | | 22 | mA | | 16 |+| VCC Operating Supply Voltage | VCC | 2.97 | 5 | 5.5 | V | Normal Operation | 17 |+| VCCIO Operating Supply Voltage | VCCIO | 1.62 | | 3.63 | V | | 17 |+| Operating Supply Current | Icc1 | 8 | 8 | 8.4 | mA | Normal Operation | 17 |+| 3.3V regulator output | 3V3 | 2.97 | 3.3 | 3.63 | V | VCC must be greater than 3V3; otherwise 3V3OUT is an input driven with 3.3V | 17 |+| Frequency of Operation (internal clock) | | 11.98 | 12 | 12.02 | MHz | | 21 |+| Clock Period (internal clock) | | 83.19 | 83.33 | 83.47 | ns | | 21 |+| Duty Cycle (internal clock) | | 45 | 50 | 55 | % | | 21 |+| Output Voltage Low (FIFO I/O, VCCIO = +3.3V) | Vol | 0 | | 0.4 | V | VCCIO = +3.3V; Iol = +/-2mA; I/O Drive strength = 4mA | 18 |+| Input low Switching Threshold (FIFO I/O) | Vil | | | 0.8 | V | VCCIO = +3.3V; LVTTL | 18 |+| Input High Switching Threshold (FIFO I/O) | Vih | 2 | | | V | VCCIO = +3.3V; LVTTL | 18 |+| Input pull-up resistance (FIFO I/O) | Rpu | 40 | 75 | 190 | KΩ | VCCIO = +3.3V; Vin = 0 | 18 |+| Input pull-down resistance (FIFO I/O) | Rpd | 40 | 75 | 190 | KΩ | VCCIO = +3.3V; Vin = VCCIO | 18 |+| Input Leakage Current (FIFO I/O) | Iin | -10 | 1 | 10 | μA | VCCIO = +3.3V; Vin = 0 | 18 |+| Tri-state output leakage current (FIFO I/O) | Ioz | -10 | 1 | 10 | μA | VCCIO = +3.3V; Vin = 5.5V or 0 | 18 |+| Output Voltage Low (FIFO I/O, VCCIO = +2.5V) | Vol | 0 | | 0.4 | V | VCCIO = +2.5V; Iol = +/-2mA; I/O Drive strength = 4mA | 19 |+| Input low Switching Threshold (FIFO I/O) | Vil | | | 0.8 | V | VCCIO = +2.5V; LVTTL | 19 |+| Input High Switching Threshold (FIFO I/O) | Vih | 0.8 | | | V | VCCIO = +2.5V; LVTTL | 19 |+| Input pull-up resistance (FIFO I/O) | Rpu | 40 | 75 | 190 | KΩ | VCCIO = +2.5V; Vin = 0 | 19 |+| Input pull-down resistance (FIFO I/O) | Rpd | 40 | 75 | 190 | KΩ | VCCIO = +2.5V; Vin = VCCIO | 19 |+| Input Leakage Current (FIFO I/O) | Iin | -10 | 1 | 10 | μA | VCCIO = +2.5V; Vin = 0 | 19 |+| Tri-state output leakage current (FIFO I/O) | Ioz | -10 | 1 | 10 | μA | VCCIO = +2.5V; Vin = 5.5V or 0 | 19 |+| Input low Switching Threshold (FIFO I/O) | Vil | | | 0.77 | V | VCCIO = +1.8V; LVTTL | 20 |+| Input High Switching Threshold (FIFO I/O) | Vih | 1.6 | | | V | VCCIO = +1.8V; LVTTL | 20 |+| Input pull-up resistance (FIFO I/O) | Rpu | 40 | 75 | 190 | KΩ | VCCIO = +1.8V; Vin = 0 | 20 |+| Input pull-down resistance (FIFO I/O) | Rpd | 40 | 75 | 190 | KΩ | VCCIO = +1.8V; Vin = VCCIO | 20 |+| Input Leakage Current (FIFO I/O) | Iin | -10 | 1 | 10 | μA | VCCIO = +1.8V; Vin = 0 | 20 |+| Tristate output leakage current (FIFO I/O) | Ioz | -10 | 1 | 10 | μA | VCCIO = +1.8V; Vin = 5.5V or 0 | 20 |+| USB I/O Output Voltage Low (USBDP, USBDM) | Vol | | | 0.2 | V | | 20 |+| USB I/O Input low Switching Threshold (USBDP, USBDM) | Vil | | | 0.8 | V | | 20 |+| USB I/O Input High Switching Threshold (USBDP, USBDM) | Vih | 2 | | | V | | 20 |+| Operating Supply Current | Icc2 | | 125 | | μA | USB Suspend | 17 |++## CAD (KiCad official)++- Symbol: `FT240XS-R`+- Footprint: `Package_SO:SSOP-24_3.9x8.7mm_P0.635mm`+- 3D model: SSOP-24-150mil (KiCad packages3D, STEP)+- 3D model files: `ft240xs-r-etched.step` / `ft240xs-r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ft240xs-r.step` / `ft240xs-r.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [FTDI datasheet](docs/ft240xs-r-datasheet.pdf) (41 pp, sha256 `5765a1e6b849401b`, retrieved 2026-11-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ft240xs-r-datasheet.pdf)
docs/ft240xs-r-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
ft240xs-r-etched.glbadded⋯ 1 unchanged line ⋯
ft240xs-r-hero.glbadded⋯ 1 unchanged line ⋯
ft240xs-r-hero.overlay.jsonadded+612@@ -0,0 +1,612 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "FT240XS-R",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 24,+ "span_mm": 7.385,+ "dash_mm": 0.1846,+ "gap_mm": 0.1108,+ "pad_stroke_mm": 0.0443+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 24,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.591,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -3.618,+ 3.618+ ],+ "pads_bbox_mm": [+ -3.2,+ 3.2,+ -3.693,+ 3.693+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "ft240xs-r-etched.glb",+ "glb_sha256": "29b47264f79a7a745e62c0d33803ad11d480e4e0111e145d3e649a082003d896",+ "footprint": "ft240xs-r.kicad_mod",+ "footprint_sha256": "f7ea3558ecd97ad042b78a07bb35af48ce2b550bf593df9586cd18a778e0fab4",+ "pins": "page.json component.pins",+ "pins_sha256": "d7f8eaf2ecc602bcd5f2ac242ab9180b44545e8a79c9d89122cecfb13d6c92b7"+ },+ "generator": "adom-wiki 1.8.11 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "D4",+ "x": -3.3,+ "y": -3.492,+ "align": "right",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "2",+ "text": "D2",+ "x": -3.3,+ "y": -2.858,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "3",+ "text": "VCCIO",+ "x": -3.3,+ "y": -2.222,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "4",+ "text": "D1",+ "x": -3.3,+ "y": -1.588,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "5",+ "text": "D7",+ "x": -3.3,+ "y": -0.952,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "6",+ "text": "GND",+ "x": -3.3,+ "y": -0.318,+ "align": "right",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "7",+ "text": "D5",+ "x": -3.3,+ "y": 0.318,+ "align": "right",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "8",+ "text": "D6",+ "x": -3.3,+ "y": 0.952,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "9",+ "text": "D3",+ "x": -3.3,+ "y": 1.588,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "10",+ "text": "SIWU#",+ "x": -3.3,+ "y": 2.222,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "11",+ "text": "RD#",+ "x": -3.3,+ "y": 2.858,+ "align": "right",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "12",+ "text": "WR",+ "x": -3.3,+ "y": 3.492,+ "align": "right",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "13",+ "text": "USBDP",+ "x": 3.3,+ "y": 3.492,+ "align": "left",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "14",+ "text": "USBDM",+ "x": 3.3,+ "y": 2.858,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "15",+ "text": "3V3OUT",+ "x": 3.3,+ "y": 2.222,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "16",+ "text": "RESET#",+ "x": 3.3,+ "y": 1.588,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "17",+ "text": "VCORE",+ "x": 3.3,+ "y": 0.952,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "18",+ "text": "VCC",+ "x": 3.3,+ "y": 0.318,+ "align": "left",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "19",+ "text": "GND",+ "x": 3.3,+ "y": -0.318,+ "align": "left",+ "vertical": false,+ "h": 0.318+ },+ {+ "pad": "20",+ "text": "TXE#",+ "x": 3.3,+ "y": -0.952,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "21",+ "text": "RXF#",+ "x": 3.3,+ "y": -1.588,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "22",+ "text": "CBUS6",+ "x": 3.3,+ "y": -2.222,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "23",+ "text": "CBUS5",+ "x": 3.3,+ "y": -2.858,+ "align": "left",+ "vertical": false,+ "h": 0.317+ },+ {+ "pad": "24",+ "text": "D0",+ "x": 3.3,+ "y": -3.492,+ "align": "left",+ "vertical": false,+ "h": 0.318+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -2.6,+ -3.4925+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -2.6,+ -2.8575+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -2.6,+ -2.2225+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -2.6,+ -1.5875+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -2.6,+ -0.9525+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -2.6,+ -0.3175+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ -2.6,+ 0.3175+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ -2.6,+ 0.9525+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ -2.6,+ 1.5875+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ -2.6,+ 2.2225+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ -2.6,+ 2.8575+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ -2.6,+ 3.4925+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 2.6,+ 3.4925+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "rect",+ "center_mm": [+ 2.6,+ 2.8575+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 2.6,+ 2.2225+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "rect",+ "center_mm": [+ 2.6,+ 1.5875+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "rect",+ "center_mm": [+ 2.6,+ 0.9525+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "rect",+ "center_mm": [+ 2.6,+ 0.3175+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "rect",+ "center_mm": [+ 2.6,+ -0.3175+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "rect",+ "center_mm": [+ 2.6,+ -0.9525+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "rect",+ "center_mm": [+ 2.6,+ -1.5875+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "rect",+ "center_mm": [+ 2.6,+ -2.2225+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "rect",+ "center_mm": [+ 2.6,+ -2.8575+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "rect",+ "center_mm": [+ 2.6,+ -3.4925+ ],+ "size_mm": [+ 1.2,+ 0.4+ ],+ "rot": 0.0+ }+ ]+}
ft240xs-r.glbadded⋯ 1 unchanged line ⋯
ft240xs-r.kicad_modadded+353@@ -0,0 +1,353 @@+(footprint "SSOP-24_3.9x8.7mm_P0.635mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "SSOP24: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot556-1_po.pdf)")+ (tags "SSOP 0.635")+ (property "Reference" "REF**"+ (at 0 -5.4 0)+ (layer "F.SilkS")+ (uuid "9b47fe01-b9ae-4d77-8118-50367085214e")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "SSOP-24_3.9x8.7mm_P0.635mm"+ (at 0 5.4 0)+ (layer "F.Fab")+ (uuid "1247a6d8-093e-4d20-824b-9ba5346453a5")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" "https://datasheet.lcsc.com/datasheet/pdf/6d6922074045c19c9d97bcbe6669baea.pdf"+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "8e8aba3b-896d-4035-a67c-66738e10012d")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "0c2c6470-05e3-47fc-81a0-2b4032a2faec")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.075 -4.475)+ (end -2.075 -3.9175)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "d3bf6ed7-89eb-40dc-9c8b-a9e07ebb1a54")+ )+ (fp_line+ (start -2.075 -4.475)+ (end 2.075 -4.475)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "50470f80-7925-41fd-83be-b680bcec60cb")+ )+ (fp_line+ (start -2.075 4.475)+ (end -2.075 3.9175)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "c888aecc-964a-4825-90e1-ec5ca65ce007")+ )+ (fp_line+ (start -2.075 4.475)+ (end 2.075 4.475)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "59ce82ac-d7da-423f-8092-9dee0fc013c5")+ )+ (fp_line+ (start 2.075 -4.475)+ (end 2.075 -3.9175)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "95042ab7-5cd6-4c56-a22d-329b2388d18b")+ )+ (fp_line+ (start 2.075 4.475)+ (end 2.075 3.9175)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "75d49884-554a-4e1c-85fa-b0627f69b8a3")+ )+ (fp_poly+ (pts+ (xy -2.6375 -4) (xy -2.8775 -4.33) (xy -2.3975 -4.33) (xy -2.6375 -4)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "c90de136-287b-4b0f-8ced-1d0ef454de14")+ )+ (fp_line+ (start -1.95 -3.35)+ (end -0.95 -4.35)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "48e07779-391b-442f-969b-3d168f0d9f5a")+ )+ (fp_line+ (start -1.95 4.35)+ (end -1.95 -3.35)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "f13b85ed-5024-486d-9237-ae8ae1261893")+ )+ (fp_line+ (start -0.95 -4.35)+ (end 1.95 -4.35)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "3046a3d8-bf84-4ce0-91a8-bec2802785bd")+ )+ (fp_line+ (start 1.95 -4.35)+ (end 1.95 4.35)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "a979cb6f-3d05-430b-bdea-254723de815b")+ )+ (fp_line+ (start 1.95 4.35)+ (end -1.95 4.35)+ (stroke+ (width 0.15)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "02127eb7-a0f7-4e1b-b606-18f387d14036")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (uuid "e732a7cf-90a7-470f-906f-f566880df83e")+ (effects+ (font+ (size 0.8 0.8)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd rect+ (at -2.6 -3.4925)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "5c693a1b-f68e-4e14-982c-13f4ce243d60")+ )+ (pad "2" smd rect+ (at -2.6 -2.8575)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "ffe528ed-b94a-4869-a608-9ea75753298b")+ )+ (pad "3" smd rect+ (at -2.6 -2.2225)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "b7eb31f8-c01b-4b64-a2a8-81ec4be8a231")+ )+ (pad "4" smd rect+ (at -2.6 -1.5875)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "7056f7c6-58ed-435e-bc00-2b5f44c0e7f2")+ )+ (pad "5" smd rect+ (at -2.6 -0.9525)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "eecd5ae6-afff-450d-b75a-965fc33ceaea")+ )+ (pad "6" smd rect+ (at -2.6 -0.3175)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "35a88ee7-cd79-48f5-9728-79d5c4502721")+ )+ (pad "7" smd rect+ (at -2.6 0.3175)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "cf23a804-0200-4985-9991-de3b40acc4d9")+ )+ (pad "8" smd rect+ (at -2.6 0.9525)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "375d15b9-08e1-4ef0-8738-87e8918164af")+ )+ (pad "9" smd rect+ (at -2.6 1.5875)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "5f897064-c8d8-455d-b9cd-8de87eba363b")+ )+ (pad "10" smd rect+ (at -2.6 2.2225)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "e1a76482-ec55-423b-bcdd-b53ae00776f9")+ )+ (pad "11" smd rect+ (at -2.6 2.8575)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "8520d157-6712-4f98-8e56-3f7a6d8779ca")+ )+ (pad "12" smd rect+ (at -2.6 3.4925)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "ed9d9495-51bb-44fe-b942-f7da973e1389")+ )+ (pad "13" smd rect+ (at 2.6 3.4925)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "52ce3a30-31a6-4c83-a40d-2ddc43ecbf0f")+ )+ (pad "14" smd rect+ (at 2.6 2.8575)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "6b8894ad-ce15-4a0f-b831-2b1b7339da56")+ )+ (pad "15" smd rect+ (at 2.6 2.2225)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "e5fcd28c-30a9-409b-8514-13552483bf29")+ )+ (pad "16" smd rect+ (at 2.6 1.5875)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "c6bb60a0-288b-4329-9020-9fb967fb9e7d")+ )+ (pad "17" smd rect+ (at 2.6 0.9525)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "db5f4756-05f3-484f-867c-611ed49be34e")+ )+ (pad "18" smd rect+ (at 2.6 0.3175)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "55df2fe6-3956-4ab6-897a-b15cd5b9fdd2")+ )+ (pad "19" smd rect+ (at 2.6 -0.3175)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "879e568e-3a59-4a3a-86ee-fa80be745e8d")+ )+ (pad "20" smd rect+ (at 2.6 -0.9525)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "c469460a-2870-4551-9c4c-21e82f2ed721")+ )+ (pad "21" smd rect+ (at 2.6 -1.5875)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "159c6578-33d9-4d10-96d0-ce6e843985db")+ )+ (pad "22" smd rect+ (at 2.6 -2.2225)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "683ec708-9165-4e29-ab3a-9479cbbee2d2")+ )+ (pad "23" smd rect+ (at 2.6 -2.8575)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "1337c383-bfa8-4cfe-8994-a0c5b0c9df93")+ )+ (pad "24" smd rect+ (at 2.6 -3.4925)+ (size 1.2 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "ceffc88a-d6b6-4928-a4c2-1cf67f2c0c30")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SSOP-24_3.9x8.7mm_P0.635mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+ (fp_poly+ (pts (xy -3.45 -3.95) (xy -2.20 -3.95) (xy -2.20 -4.60) (xy 2.20 -4.60) (xy 2.20 -3.95) (xy 3.45 -3.95) (xy 3.45 3.95) (xy 2.20 3.95) (xy 2.20 4.60) (xy -2.20 4.60) (xy -2.20 3.95) (xy -3.45 3.95))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ )+)
ft240xs-r.kicad_symadded+109@@ -0,0 +1,109 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "FT240XS-R" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 17.78 0) (effects (font (size 1.27 1.27))))+ (property "Value" "FT240XS-R" (at 0 -20.32 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "FT240XS-R_0_1"+ (rectangle (start -12.70 15.24) (end 12.70 -17.78)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "FT240XS-R_1_1"+ (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+ (name "D4" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+ (name "D2" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 7.62 0) (length 5.08)+ (name "VCCIO" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+ (name "D1" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+ (name "D7" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 0.00 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+ (name "D5" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+ (name "D6" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+ (name "D3" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -10.16 0) (length 5.08)+ (name "SIWU#" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -12.70 0) (length 5.08)+ (name "RD#" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -15.24 0) (length 5.08)+ (name "WR" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 12.70 180) (length 5.08)+ (name "D0" (effects (font (size 1.27 1.27))))+ (number "24" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+ (name "CBUS5" (effects (font (size 1.27 1.27))))+ (number "23" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+ (name "CBUS6" (effects (font (size 1.27 1.27))))+ (number "22" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 5.08 180) (length 5.08)+ (name "RXF#" (effects (font (size 1.27 1.27))))+ (number "21" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 2.54 180) (length 5.08)+ (name "TXE#" (effects (font (size 1.27 1.27))))+ (number "20" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 0.00 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "19" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -2.54 180) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 -5.08 180) (length 5.08)+ (name "VCORE" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "RESET#" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 -10.16 180) (length 5.08)+ (name "3V3OUT" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+ (name "USBDM" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)+ (name "USBDP" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
ft240xs-r.lbradded+188@@ -0,0 +1,188 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>FTDI USB ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet</description>+<packages>+<package name="SSOP-24_3.9x8.7mm_P0.635mm">+ <description>SSOP-24, 3.9 x 8.7 mm, 0.635 mm pitch. SSOP24: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot556-1_po.pdf)</description>+ <smd name="1" x="-2.6000" y="3.4925" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="2" x="-2.6000" y="2.8575" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="3" x="-2.6000" y="2.2225" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="4" x="-2.6000" y="1.5875" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="5" x="-2.6000" y="0.9525" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="6" x="-2.6000" y="0.3175" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="7" x="-2.6000" y="-0.3175" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="8" x="-2.6000" y="-0.9525" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="9" x="-2.6000" y="-1.5875" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="10" x="-2.6000" y="-2.2225" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="11" x="-2.6000" y="-2.8575" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="12" x="-2.6000" y="-3.4925" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="13" x="2.6000" y="-3.4925" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="14" x="2.6000" y="-2.8575" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="15" x="2.6000" y="-2.2225" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="16" x="2.6000" y="-1.5875" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="17" x="2.6000" y="-0.9525" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="18" x="2.6000" y="-0.3175" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="19" x="2.6000" y="0.3175" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="20" x="2.6000" y="0.9525" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="21" x="2.6000" y="1.5875" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="22" x="2.6000" y="2.2225" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="23" x="2.6000" y="2.8575" dx="1.2000" dy="0.4000" layer="1"/>+ <smd name="24" x="2.6000" y="3.4925" dx="1.2000" dy="0.4000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.6375" y="4.0000"/>+ <vertex x="-2.8775" y="4.3300"/>+ <vertex x="-2.3975" y="4.3300"/>+ <vertex x="-2.6375" y="4.0000"/>+ </polygon>+ <wire x1="-2.0750" y1="4.4750" x2="-2.0750" y2="3.9175" width="0.1500" layer="21"/>+ <wire x1="-2.0750" y1="4.4750" x2="2.0750" y2="4.4750" width="0.1500" layer="21"/>+ <wire x1="-2.0750" y1="-4.4750" x2="-2.0750" y2="-3.9175" width="0.1500" layer="21"/>+ <wire x1="-2.0750" y1="-4.4750" x2="2.0750" y2="-4.4750" width="0.1500" layer="21"/>+ <wire x1="2.0750" y1="4.4750" x2="2.0750" y2="3.9175" width="0.1500" layer="21"/>+ <wire x1="2.0750" y1="-4.4750" x2="2.0750" y2="-3.9175" width="0.1500" layer="21"/>+ <wire x1="-1.9500" y1="3.3500" x2="-0.9500" y2="4.3500" width="0.1500" layer="51"/>+ <wire x1="-1.9500" y1="-4.3500" x2="-1.9500" y2="3.3500" width="0.1500" layer="51"/>+ <wire x1="-0.9500" y1="4.3500" x2="1.9500" y2="4.3500" width="0.1500" layer="51"/>+ <wire x1="1.9500" y1="4.3500" x2="1.9500" y2="-4.3500" width="0.1500" layer="51"/>+ <wire x1="1.9500" y1="-4.3500" x2="-1.9500" y2="-4.3500" width="0.1500" layer="51"/>+ <text x="0" y="5.075" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-5.075" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="FT240XS-R">+ <description>FTDI USB ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet</description>+ <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/>+ <wire x1="12.7" y1="15.24" x2="12.7" y2="-17.78" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-17.78" x2="-12.7" y2="-17.78" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-17.78" x2="-12.7" y2="15.24" width="0.254" layer="94"/>+ <text x="0.0000" y="17.7800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-20.3200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="D4" x="-17.78" y="12.7" length="middle" direction="io"/>+ <pin name="D2" x="-17.78" y="10.16" length="middle" direction="io"/>+ <pin name="VCCIO" x="-17.78" y="7.62" length="middle" direction="pwr"/>+ <pin name="D1" x="-17.78" y="5.08" length="middle" direction="io"/>+ <pin name="D7" x="-17.78" y="2.54" length="middle" direction="io"/>+ <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="D5" x="-17.78" y="-2.54" length="middle" direction="io"/>+ <pin name="D6" x="-17.78" y="-5.08" length="middle" direction="io"/>+ <pin name="D3" x="-17.78" y="-7.62" length="middle" direction="io"/>+ <pin name="SIWU#" x="-17.78" y="-10.16" length="middle" direction="in"/>+ <pin name="RD#" x="-17.78" y="-12.7" length="middle" direction="in"/>+ <pin name="WR" x="-17.78" y="-15.24" length="middle" direction="in"/>+ <pin name="D0" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+ <pin name="CBUS5" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+ <pin name="CBUS6" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+ <pin name="RXF#" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>+ <pin name="TXE#" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+ <pin name="GND@2" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="VCC" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="VCORE" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+ <pin name="RESET#" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+ <pin name="3V3OUT" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>+ <pin name="USBDM" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+ <pin name="USBDP" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="FT240XS-R" prefix="U">+ <description>FTDI USB ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet</description>+ <gates>+ <gate name="G$1" symbol="FT240XS-R" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="SSOP-24_3.9x8.7mm_P0.635mm">+ <connects>+ <connect gate="G$1" pin="D4" pad="1"/>+ <connect gate="G$1" pin="D2" pad="2"/>+ <connect gate="G$1" pin="VCCIO" pad="3"/>+ <connect gate="G$1" pin="D1" pad="4"/>+ <connect gate="G$1" pin="D7" pad="5"/>+ <connect gate="G$1" pin="GND" pad="6"/>+ <connect gate="G$1" pin="D5" pad="7"/>+ <connect gate="G$1" pin="D6" pad="8"/>+ <connect gate="G$1" pin="D3" pad="9"/>+ <connect gate="G$1" pin="SIWU#" pad="10"/>+ <connect gate="G$1" pin="RD#" pad="11"/>+ <connect gate="G$1" pin="WR" pad="12"/>+ <connect gate="G$1" pin="D0" pad="24"/>+ <connect gate="G$1" pin="CBUS5" pad="23"/>+ <connect gate="G$1" pin="CBUS6" pad="22"/>+ <connect gate="G$1" pin="RXF#" pad="21"/>+ <connect gate="G$1" pin="TXE#" pad="20"/>+ <connect gate="G$1" pin="GND@2" pad="19"/>+ <connect gate="G$1" pin="VCC" pad="18"/>+ <connect gate="G$1" pin="VCORE" pad="17"/>+ <connect gate="G$1" pin="RESET#" pad="16"/>+ <connect gate="G$1" pin="3V3OUT" pad="15"/>+ <connect gate="G$1" pin="USBDM" pad="14"/>+ <connect gate="G$1" pin="USBDP" pad="13"/>+ </connects>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="FT240XS-R" constant="no"/>+ <attribute name="MANUFACTURER" value="FTDI" constant="no"/>+ <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/6d6922074045c19c9d97bcbe6669baea.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ft240xs-r" constant="no"/>+ <attribute name="MOUSER_PN" value="895-FT240XS-R" constant="no"/>+ <attribute name="DIGIKEY_PN" value="768-1127-2-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C2651872" constant="no"/>+ </technology>+ </technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
ft240xs-r.stepadded+7827@@ -0,0 +1,7827 @@+ISO-10303-21;+HEADER;+/* SSOP-24_3.9x8.7mm_P0.635mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of SSOP-24_3.9x8.7mm_P0.635mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'SSOP-24_3.9x8.7mm_P0.635mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('SSOP-24_3.9x8.7mm_P0.635mm','SSOP-24_3.9x8.7mm_P0.635mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design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ontext #1','3D Context with UNIT and UNCERTAINTY') );+#7364=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#7365=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#7366=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#7367=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7364,'distance_accuracy_value','confusion accuracy');+#7368=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#7369=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#7370,#7380,#7381,#7382,#7383,#7384,#7385,#7386,#7387,#7388,#7389,#7390,#7391,#7392,#7393,#7402,#7403,#7404,#7405,#7406,#7407,#7408,#7409,#7410,#7411,#7412,#7413,#7414,#7415,#7416,#7417,#7418,#7419,#7420,#7421,#7422,#7423,#7424,#7425,#7426,#7427,#7428,#7429,#7430,#7431,#7432,#7433,#7434,#7435,#7436,#7437,#7438,#7439,#7440,#7441,#7442,#7443,#7444,#7445,#7446,#7447,#7448,#7449,#7450,#7451,#7452,#7453,#7454,#7455,#7456,#7457,#7458,#7459,#7460,#7461,#7462,#7463,#7464,#7465,#7466,#7467,#7468,#7469,#7470,#7471,#7472,#7473,#7474,#7475,#7476,#7477,#7478,#7479,#7480,#7481,#7482,#7483,#7484,#7485,#7486,#7487,#7488,#7489,#7490,#7491,#7492,#7493,#7494,#7495,#7496,#7497,#7498,#7499,#7500,#7501,#7502,#7503,#7504,#7505,#7506,#7507,#7508,#7509,#7510,#7511,#7512,#7513,#7514,#7515,#7516,#7517,#7518,#7519,#7520,#7521,#7522,#7523,#7524,#7525,#7526,#7527,#7528,#7529,#7530,#7531,#7532,#7533,#7534,#7535,#7536,#7537,#7538,#7539,#7540,#7541,#7542,#7543,#7544,#7545,#7546,#7547,#7548,#7549,#7550,#7551,#7552,#7553,#7554,#7555,#7556,#7557,#7558,#7559,#7560,#7561,#7562,#7563,#7564,#7565,#7566,#7567,#7568,#7569,#7570,#7571,#7572,#7573,#7574,#7575,#7576,#7577,#7578,#7579,#7580,#7581,#7582,#7583,#7584,#7585,#7586,#7587,#7588,#7589,#7590,#7591,#7592,#7593,#7594,#7595,#7596,#7597,#7598,#7599,#7600,#7601,#7602,#7603,#7604,#7605,#7606,#7607,#7608,#7609,#7610,#7611,#7612,#7613,#7614,#7615,#7616,#7617,#7618,#7619,#7620,#7621,#7622,#7623,#7624,#7625,#7626,#7627,#7628,#7629,#7630,#7631,#7632,#7633,#7634,#7635,#7636,#7637,#7638,#7639,#7640,#7641,#7642,#7643,#7644,#7645,#7646,#7647,#7648,#7649,#7650,#7651,#7652,#7653,#7654,#7655,#7656,#7657,#7658,#7659,#7660,#7661,#7662,#7663,#7664,#7665,#7666,#7667,#7668,#7669,#7670,#7671,#7672,#7673,#7674,#7675,#7676,#7677,#7678,#7679,#7680,#7681,#7682,#7683,#7684,#7685,#7686,#7687,#7688,#7689,#7690,#7691,#7692,#7693,#7694,#7695,#7696,#7697,#7698,#7699,#7700,#7701,#7702,#7703,#7704,#7705,#7706,#7707,#7708,#7709,#7710,#7711,#7712,#7713,#7714,#7715,#7716,#7717,#7718,#7719,#7720,#7721,#7722,#7723,#7724,#7725,#7726,#7727,#7728,#7729,#7730,#7731,#7732,#7733,#7734,#7735,#7736,#7737,#7738,#7739,#7740,#7741,#7742,#7743,#7744,#7745,#7746,#7747,#7748,#7749,#7750,#7751,#7752,#7753,#7754,#7755,#7756,#7757,#7758,#7759,#7760,#7761,#7762,#7763,#7764,#7765,#7766,#7767,#7768,#7769,#7770,#7771,#7772,#7773),#7363);+#7370=STYLED_ITEM('color',(#7371),#17);+#7371=PRESENTATION_STYLE_ASSIGNMENT((#7372,#7378));+#7372=SURFACE_STYLE_USAGE(.BOTH.,#7373);+#7373=SURFACE_SIDE_STYLE('',(#7374));+#7374=SURFACE_STYLE_FILL_AREA(#7375);+#7375=FILL_AREA_STYLE('',(#7376));+#7376=FILL_AREA_STYLE_COLOUR('',#7377);+#7377=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#7378=CURVE_STYLE('',#7379,POSITIVE_LENGTH_MEASURE(0.1),#7377);+#7379=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7380=STYLED_ITEM('color',(#7371),#43);+#7381=STYLED_ITEM('color',(#7371),#96);+#7382=STYLED_ITEM('color',(#7371),#109);+#7383=STYLED_ITEM('color',(#7371),#128);+#7384=STYLED_ITEM('color',(#7371),#141);+#7385=STYLED_ITEM('color',(#7371),#250);+#7386=STYLED_ITEM('color',(#7371),#359);+#7387=STYLED_ITEM('color',(#7371),#372);+#7388=STYLED_ITEM('color',(#7371),#385);+#7389=STYLED_ITEM('color',(#7371),#394);+#7390=STYLED_ITEM('color',(#7371),#409);+#7391=STYLED_ITEM('color',(#7371),#473);+#7392=STYLED_ITEM('color',(#7371),#484);+#7393=STYLED_ITEM('color',(#7394),#503);+#7394=PRESENTATION_STYLE_ASSIGNMENT((#7395,#7401));+#7395=SURFACE_STYLE_USAGE(.BOTH.,#7396);+#7396=SURFACE_SIDE_STYLE('',(#7397));+#7397=SURFACE_STYLE_FILL_AREA(#7398);+#7398=FILL_AREA_STYLE('',(#7399));+#7399=FILL_AREA_STYLE_COLOUR('',#7400);+#7400=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#7401=CURVE_STYLE('',#7379,POSITIVE_LENGTH_MEASURE(0.1),#7400);+#7402=STYLED_ITEM('color',(#7371),#528);+#7403=STYLED_ITEM('color',(#7394),#546);+#7404=STYLED_ITEM('color',(#7371),#567);+#7405=STYLED_ITEM('color',(#7394),#585);+#7406=STYLED_ITEM('color',(#7371),#606);+#7407=STYLED_ITEM('color',(#7394),#624);+#7408=STYLED_ITEM('color',(#7371),#645);+#7409=STYLED_ITEM('color',(#7394),#663);+#7410=STYLED_ITEM('color',(#7371),#684);+#7411=STYLED_ITEM('color',(#7394),#702);+#7412=STYLED_ITEM('color',(#7371),#723);+#7413=STYLED_ITEM('color',(#7394),#741);+#7414=STYLED_ITEM('color',(#7371),#762);+#7415=STYLED_ITEM('color',(#7394),#780);+#7416=STYLED_ITEM('color',(#7371),#801);+#7417=STYLED_ITEM('color',(#7394),#819);+#7418=STYLED_ITEM('color',(#7371),#840);+#7419=STYLED_ITEM('color',(#7394),#858);+#7420=STYLED_ITEM('color',(#7371),#879);+#7421=STYLED_ITEM('color',(#7394),#897);+#7422=STYLED_ITEM('color',(#7371),#918);+#7423=STYLED_ITEM('color',(#7394),#936);+#7424=STYLED_ITEM('color',(#7371),#957);+#7425=STYLED_ITEM('color',(#7371),#967);+#7426=STYLED_ITEM('color',(#7394),#979);+#7427=STYLED_ITEM('color',(#7371),#1000);+#7428=STYLED_ITEM('color',(#7394),#1018);+#7429=STYLED_ITEM('color',(#7371),#1039);+#7430=STYLED_ITEM('color',(#7394),#1057);+#7431=STYLED_ITEM('color',(#7371),#1078);+#7432=STYLED_ITEM('color',(#7394),#1096);+#7433=STYLED_ITEM('color',(#7371),#1117);+#7434=STYLED_ITEM('color',(#7394),#1135);+#7435=STYLED_ITEM('color',(#7371),#1156);+#7436=STYLED_ITEM('color',(#7394),#1174);+#7437=STYLED_ITEM('color',(#7371),#1195);+#7438=STYLED_ITEM('color',(#7394),#1213);+#7439=STYLED_ITEM('color',(#7371),#1234);+#7440=STYLED_ITEM('color',(#7394),#1252);+#7441=STYLED_ITEM('color',(#7371),#1273);+#7442=STYLED_ITEM('color',(#7394),#1291);+#7443=STYLED_ITEM('color',(#7371),#1312);+#7444=STYLED_ITEM('color',(#7394),#1330);+#7445=STYLED_ITEM('color',(#7371),#1351);+#7446=STYLED_ITEM('color',(#7394),#1369);+#7447=STYLED_ITEM('color',(#7371),#1390);+#7448=STYLED_ITEM('color',(#7394),#1408);+#7449=STYLED_ITEM('color',(#7371),#1429);+#7450=STYLED_ITEM('color',(#7371),#1446);+#7451=STYLED_ITEM('color',(#7371),#1461);+#7452=STYLED_ITEM('color',(#7371),#1476);+#7453=STYLED_ITEM('color',(#7394),#1487);+#7454=STYLED_ITEM('color',(#7371),#1511);+#7455=STYLED_ITEM('color',(#7371),#1621);+#7456=STYLED_ITEM('color',(#7371),#1635);+#7457=STYLED_ITEM('color',(#7371),#1649);+#7458=STYLED_ITEM('color',(#7371),#1663);+#7459=STYLED_ITEM('color',(#7394),#1773);+#7460=STYLED_ITEM('color',(#7371),#1793);+#7461=STYLED_ITEM('color',(#7394),#1824);+#7462=STYLED_ITEM('color',(#7394),#1896);+#7463=STYLED_ITEM('color',(#7394),#1914);+#7464=STYLED_ITEM('color',(#7371),#1967);+#7465=STYLED_ITEM('color',(#7394),#1978);+#7466=STYLED_ITEM('color',(#7394),#2038);+#7467=STYLED_ITEM('color',(#7394),#2055);+#7468=STYLED_ITEM('color',(#7371),#2108);+#7469=STYLED_ITEM('color',(#7394),#2119);+#7470=STYLED_ITEM('color',(#7394),#2179);+#7471=STYLED_ITEM('color',(#7394),#2196);+#7472=STYLED_ITEM('color',(#7371),#2249);+#7473=STYLED_ITEM('color',(#7394),#2260);+#7474=STYLED_ITEM('color',(#7394),#2320);+#7475=STYLED_ITEM('color',(#7394),#2337);+#7476=STYLED_ITEM('color',(#7371),#2390);+#7477=STYLED_ITEM('color',(#7394),#2401);+#7478=STYLED_ITEM('color',(#7394),#2461);+#7479=STYLED_ITEM('color',(#7394),#2478);+#7480=STYLED_ITEM('color',(#7371),#2531);+#7481=STYLED_ITEM('color',(#7394),#2542);+#7482=STYLED_ITEM('color',(#7394),#2602);+#7483=STYLED_ITEM('color',(#7394),#2619);+#7484=STYLED_ITEM('color',(#7371),#2672);+#7485=STYLED_ITEM('color',(#7394),#2683);+#7486=STYLED_ITEM('color',(#7394),#2743);+#7487=STYLED_ITEM('color',(#7394),#2760);+#7488=STYLED_ITEM('color',(#7371),#2813);+#7489=STYLED_ITEM('color',(#7394),#2824);+#7490=STYLED_ITEM('color',(#7394),#2884);+#7491=STYLED_ITEM('color',(#7394),#2901);+#7492=STYLED_ITEM('color',(#7371),#2954);+#7493=STYLED_ITEM('color',(#7394),#2965);+#7494=STYLED_ITEM('color',(#7394),#3025);+#7495=STYLED_ITEM('color',(#7394),#3042);+#7496=STYLED_ITEM('color',(#7371),#3095);+#7497=STYLED_ITEM('color',(#7394),#3106);+#7498=STYLED_ITEM('color',(#7394),#3166);+#7499=STYLED_ITEM('color',(#7394),#3183);+#7500=STYLED_ITEM('color',(#7371),#3236);+#7501=STYLED_ITEM('color',(#7394),#3247);+#7502=STYLED_ITEM('color',(#7394),#3307);+#7503=STYLED_ITEM('color',(#7394),#3324);+#7504=STYLED_ITEM('color',(#7371),#3377);+#7505=STYLED_ITEM('color',(#7394),#3385);+#7506=STYLED_ITEM('color',(#7394),#3443);+#7507=STYLED_ITEM('color',(#7394),#3460);+#7508=STYLED_ITEM('color',(#7394),#3508);+#7509=STYLED_ITEM('color',(#7394),#3574);+#7510=STYLED_ITEM('color',(#7394),#3590);+#7511=STYLED_ITEM('color',(#7371),#3638);+#7512=STYLED_ITEM('color',(#7394),#3648);+#7513=STYLED_ITEM('color',(#7394),#3708);+#7514=STYLED_ITEM('color',(#7394),#3724);+#7515=STYLED_ITEM('color',(#7371),#3777);+#7516=STYLED_ITEM('color',(#7394),#3788);+#7517=STYLED_ITEM('color',(#7394),#3848);+#7518=STYLED_ITEM('color',(#7394),#3864);+#7519=STYLED_ITEM('color',(#7371),#3917);+#7520=STYLED_ITEM('color',(#7394),#3928);+#7521=STYLED_ITEM('color',(#7394),#3988);+#7522=STYLED_ITEM('color',(#7394),#4004);+#7523=STYLED_ITEM('color',(#7371),#4057);+#7524=STYLED_ITEM('color',(#7394),#4068);+#7525=STYLED_ITEM('color',(#7394),#4128);+#7526=STYLED_ITEM('color',(#7394),#4144);+#7527=STYLED_ITEM('color',(#7371),#4197);+#7528=STYLED_ITEM('color',(#7394),#4208);+#7529=STYLED_ITEM('color',(#7394),#4268);+#7530=STYLED_ITEM('color',(#7394),#4284);+#7531=STYLED_ITEM('color',(#7371),#4337);+#7532=STYLED_ITEM('color',(#7394),#4348);+#7533=STYLED_ITEM('color',(#7394),#4408);+#7534=STYLED_ITEM('color',(#7394),#4424);+#7535=STYLED_ITEM('color',(#7371),#4477);+#7536=STYLED_ITEM('color',(#7394),#4488);+#7537=STYLED_ITEM('color',(#7394),#4548);+#7538=STYLED_ITEM('color',(#7394),#4564);+#7539=STYLED_ITEM('color',(#7371),#4617);+#7540=STYLED_ITEM('color',(#7394),#4628);+#7541=STYLED_ITEM('color',(#7394),#4688);+#7542=STYLED_ITEM('color',(#7394),#4704);+#7543=STYLED_ITEM('color',(#7371),#4757);+#7544=STYLED_ITEM('color',(#7394),#4768);+#7545=STYLED_ITEM('color',(#7394),#4828);+#7546=STYLED_ITEM('color',(#7394),#4844);+#7547=STYLED_ITEM('color',(#7371),#4897);+#7548=STYLED_ITEM('color',(#7394),#4908);+#7549=STYLED_ITEM('color',(#7394),#4968);+#7550=STYLED_ITEM('color',(#7394),#4984);+#7551=STYLED_ITEM('color',(#7371),#5037);+#7552=STYLED_ITEM('color',(#7394),#5048);+#7553=STYLED_ITEM('color',(#7394),#5108);+#7554=STYLED_ITEM('color',(#7394),#5124);+#7555=STYLED_ITEM('color',(#7394),#5175);+#7556=STYLED_ITEM('color',(#7394),#5185);+#7557=STYLED_ITEM('color',(#7394),#5197);+#7558=STYLED_ITEM('color',(#7394),#5209);+#7559=STYLED_ITEM('color',(#7394),#5221);+#7560=STYLED_ITEM('color',(#7394),#5233);+#7561=STYLED_ITEM('color',(#7394),#5245);+#7562=STYLED_ITEM('color',(#7394),#5257);+#7563=STYLED_ITEM('color',(#7394),#5269);+#7564=STYLED_ITEM('color',(#7394),#5281);+#7565=STYLED_ITEM('color',(#7394),#5293);+#7566=STYLED_ITEM('color',(#7394),#5305);+#7567=STYLED_ITEM('color',(#7371),#5317);+#7568=STYLED_ITEM('color',(#7371),#5346);+#7569=STYLED_ITEM('color',(#7394),#5355);+#7570=STYLED_ITEM('color',(#7394),#5367);+#7571=STYLED_ITEM('color',(#7394),#5379);+#7572=STYLED_ITEM('color',(#7394),#5391);+#7573=STYLED_ITEM('color',(#7394),#5403);+#7574=STYLED_ITEM('color',(#7394),#5415);+#7575=STYLED_ITEM('color',(#7394),#5427);+#7576=STYLED_ITEM('color',(#7394),#5439);+#7577=STYLED_ITEM('color',(#7394),#5451);+#7578=STYLED_ITEM('color',(#7394),#5463);+#7579=STYLED_ITEM('color',(#7394),#5475);+#7580=STYLED_ITEM('color',(#7371),#5487);+#7581=STYLED_ITEM('color',(#7394),#5496);+#7582=STYLED_ITEM('color',(#7371),#5506);+#7583=STYLED_ITEM('color',(#7394),#5513);+#7584=STYLED_ITEM('color',(#7394),#5523);+#7585=STYLED_ITEM('color',(#7394),#5534);+#7586=STYLED_ITEM('color',(#7394),#5544);+#7587=STYLED_ITEM('color',(#7394),#5554);+#7588=STYLED_ITEM('color',(#7394),#5564);+#7589=STYLED_ITEM('color',(#7394),#5574);+#7590=STYLED_ITEM('color',(#7394),#5584);+#7591=STYLED_ITEM('color',(#7394),#5593);+#7592=STYLED_ITEM('color',(#7394),#5603);+#7593=STYLED_ITEM('color',(#7394),#5613);+#7594=STYLED_ITEM('color',(#7394),#5623);+#7595=STYLED_ITEM('color',(#7394),#5633);+#7596=STYLED_ITEM('color',(#7394),#5643);+#7597=STYLED_ITEM('color',(#7394),#5653);+#7598=STYLED_ITEM('color',(#7394),#5663);+#7599=STYLED_ITEM('color',(#7394),#5671);+#7600=STYLED_ITEM('color',(#7394),#5681);+#7601=STYLED_ITEM('color',(#7394),#5691);+#7602=STYLED_ITEM('color',(#7394),#5701);+#7603=STYLED_ITEM('color',(#7394),#5711);+#7604=STYLED_ITEM('color',(#7394),#5721);+#7605=STYLED_ITEM('color',(#7394),#5731);+#7606=STYLED_ITEM('color',(#7394),#5741);+#7607=STYLED_ITEM('color',(#7394),#5749);+#7608=STYLED_ITEM('color',(#7394),#5759);+#7609=STYLED_ITEM('color',(#7394),#5769);+#7610=STYLED_ITEM('color',(#7394),#5779);+#7611=STYLED_ITEM('color',(#7394),#5789);+#7612=STYLED_ITEM('color',(#7394),#5799);+#7613=STYLED_ITEM('color',(#7394),#5809);+#7614=STYLED_ITEM('color',(#7394),#5819);+#7615=STYLED_ITEM('color',(#7394),#5827);+#7616=STYLED_ITEM('color',(#7394),#5837);+#7617=STYLED_ITEM('color',(#7394),#5847);+#7618=STYLED_ITEM('color',(#7394),#5857);+#7619=STYLED_ITEM('color',(#7394),#5867);+#7620=STYLED_ITEM('color',(#7394),#5877);+#7621=STYLED_ITEM('color',(#7394),#5887);+#7622=STYLED_ITEM('color',(#7394),#5897);+#7623=STYLED_ITEM('color',(#7394),#5905);+#7624=STYLED_ITEM('color',(#7394),#5915);+#7625=STYLED_ITEM('color',(#7394),#5925);+#7626=STYLED_ITEM('color',(#7394),#5935);+#7627=STYLED_ITEM('color',(#7394),#5945);+#7628=STYLED_ITEM('color',(#7394),#5955);+#7629=STYLED_ITEM('color',(#7394),#5965);+#7630=STYLED_ITEM('color',(#7394),#5975);+#7631=STYLED_ITEM('color',(#7394),#5983);+#7632=STYLED_ITEM('color',(#7394),#5993);+#7633=STYLED_ITEM('color',(#7394),#6003);+#7634=STYLED_ITEM('color',(#7394),#6013);+#7635=STYLED_ITEM('color',(#7394),#6023);+#7636=STYLED_ITEM('color',(#7394),#6033);+#7637=STYLED_ITEM('color',(#7394),#6043);+#7638=STYLED_ITEM('color',(#7394),#6053);+#7639=STYLED_ITEM('color',(#7394),#6061);+#7640=STYLED_ITEM('color',(#7394),#6071);+#7641=STYLED_ITEM('color',(#7394),#6081);+#7642=STYLED_ITEM('color',(#7394),#6091);+#7643=STYLED_ITEM('color',(#7394),#6101);+#7644=STYLED_ITEM('color',(#7394),#6111);+#7645=STYLED_ITEM('color',(#7394),#6121);+#7646=STYLED_ITEM('color',(#7394),#6131);+#7647=STYLED_ITEM('color',(#7394),#6139);+#7648=STYLED_ITEM('color',(#7394),#6149);+#7649=STYLED_ITEM('color',(#7394),#6159);+#7650=STYLED_ITEM('color',(#7394),#6169);+#7651=STYLED_ITEM('color',(#7394),#6179);+#7652=STYLED_ITEM('color',(#7394),#6189);+#7653=STYLED_ITEM('color',(#7394),#6199);+#7654=STYLED_ITEM('color',(#7394),#6209);+#7655=STYLED_ITEM('color',(#7394),#6217);+#7656=STYLED_ITEM('color',(#7394),#6227);+#7657=STYLED_ITEM('color',(#7394),#6237);+#7658=STYLED_ITEM('color',(#7394),#6247);+#7659=STYLED_ITEM('color',(#7394),#6257);+#7660=STYLED_ITEM('color',(#7394),#6267);+#7661=STYLED_ITEM('color',(#7394),#6277);+#7662=STYLED_ITEM('color',(#7394),#6287);+#7663=STYLED_ITEM('color',(#7394),#6295);+#7664=STYLED_ITEM('color',(#7394),#6305);+#7665=STYLED_ITEM('color',(#7394),#6315);+#7666=STYLED_ITEM('color',(#7394),#6325);+#7667=STYLED_ITEM('color',(#7394),#6335);+#7668=STYLED_ITEM('color',(#7394),#6345);+#7669=STYLED_ITEM('color',(#7394),#6355);+#7670=STYLED_ITEM('color',(#7394),#6365);+#7671=STYLED_ITEM('color',(#7394),#6373);+#7672=STYLED_ITEM('color',(#7394),#6383);+#7673=STYLED_ITEM('color',(#7394),#6393);+#7674=STYLED_ITEM('color',(#7394),#6403);+#7675=STYLED_ITEM('color',(#7394),#6413);+#7676=STYLED_ITEM('color',(#7394),#6423);+#7677=STYLED_ITEM('color',(#7394),#6433);+#7678=STYLED_ITEM('color',(#7394),#6441);+#7679=STYLED_ITEM('color',(#7394),#6452);+#7680=STYLED_ITEM('color',(#7394),#6461);+#7681=STYLED_ITEM('color',(#7394),#6471);+#7682=STYLED_ITEM('color',(#7394),#6481);+#7683=STYLED_ITEM('color',(#7394),#6491);+#7684=STYLED_ITEM('color',(#7394),#6501);+#7685=STYLED_ITEM('color',(#7394),#6510);+#7686=STYLED_ITEM('color',(#7394),#6520);+#7687=STYLED_ITEM('color',(#7394),#6530);+#7688=STYLED_ITEM('color',(#7394),#6539);+#7689=STYLED_ITEM('color',(#7394),#6549);+#7690=STYLED_ITEM('color',(#7394),#6559);+#7691=STYLED_ITEM('color',(#7394),#6569);+#7692=STYLED_ITEM('color',(#7394),#6579);+#7693=STYLED_ITEM('color',(#7394),#6587);+#7694=STYLED_ITEM('color',(#7394),#6597);+#7695=STYLED_ITEM('color',(#7394),#6607);+#7696=STYLED_ITEM('color',(#7394),#6616);+#7697=STYLED_ITEM('color',(#7394),#6626);+#7698=STYLED_ITEM('color',(#7394),#6636);+#7699=STYLED_ITEM('color',(#7394),#6646);+#7700=STYLED_ITEM('color',(#7394),#6656);+#7701=STYLED_ITEM('color',(#7394),#6664);+#7702=STYLED_ITEM('color',(#7394),#6674);+#7703=STYLED_ITEM('color',(#7394),#6684);+#7704=STYLED_ITEM('color',(#7394),#6693);+#7705=STYLED_ITEM('color',(#7394),#6703);+#7706=STYLED_ITEM('color',(#7394),#6713);+#7707=STYLED_ITEM('color',(#7394),#6723);+#7708=STYLED_ITEM('color',(#7394),#6733);+#7709=STYLED_ITEM('color',(#7394),#6741);+#7710=STYLED_ITEM('color',(#7394),#6751);+#7711=STYLED_ITEM('color',(#7394),#6761);+#7712=STYLED_ITEM('color',(#7394),#6770);+#7713=STYLED_ITEM('color',(#7394),#6780);+#7714=STYLED_ITEM('color',(#7394),#6790);+#7715=STYLED_ITEM('color',(#7394),#6800);+#7716=STYLED_ITEM('color',(#7394),#6810);+#7717=STYLED_ITEM('color',(#7394),#6818);+#7718=STYLED_ITEM('color',(#7394),#6828);+#7719=STYLED_ITEM('color',(#7394),#6838);+#7720=STYLED_ITEM('color',(#7394),#6847);+#7721=STYLED_ITEM('color',(#7394),#6857);+#7722=STYLED_ITEM('color',(#7394),#6867);+#7723=STYLED_ITEM('color',(#7394),#6877);+#7724=STYLED_ITEM('color',(#7394),#6887);+#7725=STYLED_ITEM('color',(#7394),#6895);+#7726=STYLED_ITEM('color',(#7394),#6905);+#7727=STYLED_ITEM('color',(#7394),#6915);+#7728=STYLED_ITEM('color',(#7394),#6924);+#7729=STYLED_ITEM('color',(#7394),#6934);+#7730=STYLED_ITEM('color',(#7394),#6944);+#7731=STYLED_ITEM('color',(#7394),#6954);+#7732=STYLED_ITEM('color',(#7394),#6964);+#7733=STYLED_ITEM('color',(#7394),#6972);+#7734=STYLED_ITEM('color',(#7394),#6982);+#7735=STYLED_ITEM('color',(#7394),#6992);+#7736=STYLED_ITEM('color',(#7394),#7001);+#7737=STYLED_ITEM('color',(#7394),#7011);+#7738=STYLED_ITEM('color',(#7394),#7021);+#7739=STYLED_ITEM('color',(#7394),#7031);+#7740=STYLED_ITEM('color',(#7394),#7041);+#7741=STYLED_ITEM('color',(#7394),#7049);+#7742=STYLED_ITEM('color',(#7394),#7059);+#7743=STYLED_ITEM('color',(#7394),#7069);+#7744=STYLED_ITEM('color',(#7394),#7078);+#7745=STYLED_ITEM('color',(#7394),#7088);+#7746=STYLED_ITEM('color',(#7394),#7098);+#7747=STYLED_ITEM('color',(#7394),#7108);+#7748=STYLED_ITEM('color',(#7394),#7118);+#7749=STYLED_ITEM('color',(#7394),#7126);+#7750=STYLED_ITEM('color',(#7394),#7136);+#7751=STYLED_ITEM('color',(#7394),#7146);+#7752=STYLED_ITEM('color',(#7394),#7155);+#7753=STYLED_ITEM('color',(#7394),#7165);+#7754=STYLED_ITEM('color',(#7394),#7175);+#7755=STYLED_ITEM('color',(#7394),#7185);+#7756=STYLED_ITEM('color',(#7394),#7195);+#7757=STYLED_ITEM('color',(#7394),#7203);+#7758=STYLED_ITEM('color',(#7394),#7213);+#7759=STYLED_ITEM('color',(#7394),#7223);+#7760=STYLED_ITEM('color',(#7394),#7232);+#7761=STYLED_ITEM('color',(#7394),#7242);+#7762=STYLED_ITEM('color',(#7394),#7252);+#7763=STYLED_ITEM('color',(#7394),#7262);+#7764=STYLED_ITEM('color',(#7394),#7272);+#7765=STYLED_ITEM('color',(#7394),#7280);+#7766=STYLED_ITEM('color',(#7394),#7290);+#7767=STYLED_ITEM('color',(#7394),#7300);+#7768=STYLED_ITEM('color',(#7394),#7309);+#7769=STYLED_ITEM('color',(#7394),#7319);+#7770=STYLED_ITEM('color',(#7394),#7329);+#7771=STYLED_ITEM('color',(#7394),#7339);+#7772=STYLED_ITEM('color',(#7394),#7349);+#7773=STYLED_ITEM('color',(#7774),#7357);+#7774=PRESENTATION_STYLE_ASSIGNMENT((#7775,#7781));+#7775=SURFACE_STYLE_USAGE(.BOTH.,#7776);+#7776=SURFACE_SIDE_STYLE('',(#7777));+#7777=SURFACE_STYLE_FILL_AREA(#7778);+#7778=FILL_AREA_STYLE('',(#7779));+#7779=FILL_AREA_STYLE_COLOUR('',#7780);+#7780=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#7781=CURVE_STYLE('',#7379,POSITIVE_LENGTH_MEASURE(0.1),#7780);+ENDSEC;+END-ISO-10303-21;
package.jsonadded+332@@ -0,0 +1,332 @@+{+ "slug": "ft240xs-r",+ "version": "0.1.0",+ "type": "component",+ "description": "FTDI USB ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface ics",+ "ft240xs-r",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ft240xs-r.kicad_sym",+ "ft240xs-r.kicad_mod",+ "ft240xs-r.glb",+ "ft240xs-r.step",+ "ft240xs-r.lbr",+ "docs/hero.png",+ "docs/ft240xs-r-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ft240xs-r-hero.glb",+ "ft240xs-r-hero.overlay.json",+ "ft240xs-r-etched.glb"+ ],+ "component": {+ "mpn": "FT240XS-R",+ "manufacturer": "FTDI",+ "package": "SSOP-24-150mil",+ "pin_count": 24,+ "category": "Interface ICs",+ "subcategory": "USB ICs",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6d6922074045c19c9d97bcbe6669baea.pdf",+ "parts": {+ "symbol": "ft240xs-r.kicad_sym",+ "footprint": "ft240xs-r.kicad_mod",+ "model_3d": "ft240xs-r-hero.glb",+ "model_3d_plain": "ft240xs-r-etched.glb",+ "model_3d_step": "ft240xs-r-etched.step",+ "model_3d_step_plain": "ft240xs-r.step",+ "lbr": "ft240xs-r.lbr"+ },+ "distributor_links": {+ "lcsc": "C2651872",+ "digikey": "768-1127-2-ND",+ "mouser": "895-FT240XS-R"+ },+ "distributor_check": {+ "checked_at": "2026-11-06T00:03:05Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "768-1127-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "895-FT240XS-R",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "D4",+ "type": "bidirectional",+ "description": "FIFO data bus bit 4; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "2",+ "name": "D2",+ "type": "bidirectional",+ "description": "FIFO data bus bit 2; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "3",+ "name": "VCCIO",+ "type": "power_in",+ "description": "1V8 to 3V3 supply for the IO cells."+ },+ {+ "number": "4",+ "name": "D1",+ "type": "bidirectional",+ "description": "FIFO data bus bit 1; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "5",+ "name": "D7",+ "type": "bidirectional",+ "description": "FIFO data bus bit 7; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground supply pin."+ },+ {+ "number": "7",+ "name": "D5",+ "type": "bidirectional",+ "description": "FIFO data bus bit 5; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "8",+ "name": "D6",+ "type": "bidirectional",+ "description": "FIFO data bus bit 6; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "9",+ "name": "D3",+ "type": "bidirectional",+ "description": "FIFO data bus bit 3; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "10",+ "name": "SIWU#",+ "type": "input",+ "description": "Active low input used to flush the IC buffer back to the PC (Send Immediate) or as a wake-up signal when the PC is in suspend mode."+ },+ {+ "number": "11",+ "name": "RD#",+ "type": "input",+ "description": "Enables the current FIFO data byte on D0...D7 when low, and fetches the next byte from the receive FIFO buffer when RD# goes from high to low."+ },+ {+ "number": "12",+ "name": "WR",+ "type": "input",+ "description": "Writes the data byte on D0...D7 into the transmit FIFO buffer when WR goes from high to low."+ },+ {+ "number": "13",+ "name": "USBDP",+ "type": "bidirectional",+ "description": "USB Data Signal Plus, incorporating a 1.5kΩ pull-up resistor to 3.3V."+ },+ {+ "number": "14",+ "name": "USBDM",+ "type": "bidirectional",+ "description": "USB Data Signal Minus."+ },+ {+ "number": "15",+ "name": "3V3OUT",+ "type": "power_out",+ "description": "3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be connected to pin 18."+ },+ {+ "number": "16",+ "name": "RESET#",+ "type": "input",+ "description": "Active low reset input that can be driven by an external device to reset the FT240X; if not required it can be left unconnected or pulled up to VCC."+ },+ {+ "number": "17",+ "name": "VCORE",+ "type": "power_out",+ "description": "+1V8 output that may be left unterminated."+ },+ {+ "number": "18",+ "name": "VCC",+ "type": "power_in",+ "description": "+5V (or 3V3) supply to the device core; if VCC is 3V3, 3V3OUT must also be driven with a 3V3 input."+ },+ {+ "number": "19",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground supply pin."+ },+ {+ "number": "20",+ "name": "TXE#",+ "type": "output",+ "description": "When high do not write data into the FIFO; when low, data can be written by strobing WR high then low; tristate during reset."+ },+ {+ "number": "21",+ "name": "RXF#",+ "type": "output",+ "description": "When low, data is available to read by strobing RD# low then high; tristate during reset, and becomes an input for USB remote wake-up during suspend if that option is enabled."+ },+ {+ "number": "22",+ "name": "CBUS6",+ "type": "bidirectional",+ "description": "Configurable CBUS I/O pin whose function is set in the internal MTP memory (see CBUS Signal Options, Table 3.9)."+ },+ {+ "number": "23",+ "name": "CBUS5",+ "type": "bidirectional",+ "description": "Configurable CBUS I/O pin whose function is set in the internal MTP memory (see CBUS Signal Options, Table 3.9)."+ },+ {+ "number": "24",+ "name": "D0",+ "type": "bidirectional",+ "description": "FIFO data bus bit 0; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 15 (3V3OUT) is listed as 'Output' but the datasheet says it is an input when VCC is 3V3 and must; VCORE is a +1V8 output from the internal regulator; the datasheet says it may be left unterminated. ; The 200kΩ pull-up to VCCIO applies to FIFO interface pins when used as inputs, per note 2 of Table 3"+ ],+ "pages_sent": 27,+ "cost_usd": 0.108,+ "at": "2026-11-06T00:02:44"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/6d6922074045c19c9d97bcbe6669baea.pdf",+ "pages": 41,+ "sha256": "5765a1e6b849401b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 24,+ "described": 24,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ft240xs-r.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 8.7,+ 1.65+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "9e0654855743c5437aa9f4979b47c0dc621f54be5ccb6b51a2f0a01b2ec9981f",+ "checked": "2026-11-06",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ft240xs-r-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 8.7,+ 1.65+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a5989a3911d2946aadb37180b038f99fe70e7c55265b96d088847c1a488a3ba4",+ "checked": "2026-11-06",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "package_dims": {+ "package_code": "SSOP-24",+ "source_page": 32,+ "D": {+ "nom_mm": 8.66,+ "range_mm": [+ null,+ null+ ]+ },+ "E1": {+ "nom_mm": 3.91,+ "range_mm": [+ null,+ null+ ]+ },+ "E": {+ "nom_mm": 5.99,+ "range_mm": [+ null,+ null+ ]+ },+ "e": {+ "nom_mm": 0.635,+ "range_mm": [+ null,+ null+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "ft240xs-r.step",+ "verdict": "PASS",+ "reasons": [+ "body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ }+ }+}
page.jsonadded+338@@ -0,0 +1,338 @@+{+ "slug": "ft240xs-r",+ "version": "0.1.0",+ "type": "component",+ "description": "FTDI USB ICs, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface ics",+ "ft240xs-r",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ft240xs-r.kicad_sym",+ "ft240xs-r.kicad_mod",+ "ft240xs-r.glb",+ "ft240xs-r.step",+ "ft240xs-r.lbr",+ "docs/hero.png",+ "docs/ft240xs-r-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ft240xs-r-hero.glb",+ "ft240xs-r-hero.overlay.json",+ "ft240xs-r-etched.glb"+ ],+ "component": {+ "mpn": "FT240XS-R",+ "manufacturer": "FTDI",+ "package": "SSOP-24-150mil",+ "pin_count": 24,+ "category": "Interface ICs",+ "subcategory": "USB ICs",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6d6922074045c19c9d97bcbe6669baea.pdf",+ "parts": {+ "symbol": "ft240xs-r.kicad_sym",+ "footprint": "ft240xs-r.kicad_mod",+ "model_3d": "ft240xs-r-hero.glb",+ "model_3d_plain": "ft240xs-r-etched.glb",+ "model_3d_step": "ft240xs-r-etched.step",+ "model_3d_step_plain": "ft240xs-r.step",+ "lbr": "ft240xs-r.lbr"+ },+ "distributor_links": {+ "lcsc": "C2651872",+ "digikey": "768-1127-2-ND",+ "mouser": "895-FT240XS-R"+ },+ "distributor_check": {+ "checked_at": "2026-11-06T00:03:05Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "768-1127-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "895-FT240XS-R",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "D4",+ "type": "bidirectional",+ "description": "FIFO data bus bit 4; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "2",+ "name": "D2",+ "type": "bidirectional",+ "description": "FIFO data bus bit 2; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "3",+ "name": "VCCIO",+ "type": "power_in",+ "description": "1V8 to 3V3 supply for the IO cells."+ },+ {+ "number": "4",+ "name": "D1",+ "type": "bidirectional",+ "description": "FIFO data bus bit 1; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "5",+ "name": "D7",+ "type": "bidirectional",+ "description": "FIFO data bus bit 7; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground supply pin."+ },+ {+ "number": "7",+ "name": "D5",+ "type": "bidirectional",+ "description": "FIFO data bus bit 5; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "8",+ "name": "D6",+ "type": "bidirectional",+ "description": "FIFO data bus bit 6; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "9",+ "name": "D3",+ "type": "bidirectional",+ "description": "FIFO data bus bit 3; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ },+ {+ "number": "10",+ "name": "SIWU#",+ "type": "input",+ "description": "Active low input used to flush the IC buffer back to the PC (Send Immediate) or as a wake-up signal when the PC is in suspend mode."+ },+ {+ "number": "11",+ "name": "RD#",+ "type": "input",+ "description": "Enables the current FIFO data byte on D0...D7 when low, and fetches the next byte from the receive FIFO buffer when RD# goes from high to low."+ },+ {+ "number": "12",+ "name": "WR",+ "type": "input",+ "description": "Writes the data byte on D0...D7 into the transmit FIFO buffer when WR goes from high to low."+ },+ {+ "number": "13",+ "name": "USBDP",+ "type": "bidirectional",+ "description": "USB Data Signal Plus, incorporating a 1.5kΩ pull-up resistor to 3.3V."+ },+ {+ "number": "14",+ "name": "USBDM",+ "type": "bidirectional",+ "description": "USB Data Signal Minus."+ },+ {+ "number": "15",+ "name": "3V3OUT",+ "type": "power_out",+ "description": "3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be connected to pin 18."+ },+ {+ "number": "16",+ "name": "RESET#",+ "type": "input",+ "description": "Active low reset input that can be driven by an external device to reset the FT240X; if not required it can be left unconnected or pulled up to VCC."+ },+ {+ "number": "17",+ "name": "VCORE",+ "type": "power_out",+ "description": "+1V8 output that may be left unterminated."+ },+ {+ "number": "18",+ "name": "VCC",+ "type": "power_in",+ "description": "+5V (or 3V3) supply to the device core; if VCC is 3V3, 3V3OUT must also be driven with a 3V3 input."+ },+ {+ "number": "19",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground supply pin."+ },+ {+ "number": "20",+ "name": "TXE#",+ "type": "output",+ "description": "When high do not write data into the FIFO; when low, data can be written by strobing WR high then low; tristate during reset."+ },+ {+ "number": "21",+ "name": "RXF#",+ "type": "output",+ "description": "When low, data is available to read by strobing RD# low then high; tristate during reset, and becomes an input for USB remote wake-up during suspend if that option is enabled."+ },+ {+ "number": "22",+ "name": "CBUS6",+ "type": "bidirectional",+ "description": "Configurable CBUS I/O pin whose function is set in the internal MTP memory (see CBUS Signal Options, Table 3.9)."+ },+ {+ "number": "23",+ "name": "CBUS5",+ "type": "bidirectional",+ "description": "Configurable CBUS I/O pin whose function is set in the internal MTP memory (see CBUS Signal Options, Table 3.9)."+ },+ {+ "number": "24",+ "name": "D0",+ "type": "bidirectional",+ "description": "FIFO data bus bit 0; when used in input mode it is pulled to VCCIO through an internal 200kΩ resistor."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 15 (3V3OUT) is listed as 'Output' but the datasheet says it is an input when VCC is 3V3 and must; VCORE is a +1V8 output from the internal regulator; the datasheet says it may be left unterminated. ; The 200kΩ pull-up to VCCIO applies to FIFO interface pins when used as inputs, per note 2 of Table 3"+ ],+ "pages_sent": 27,+ "cost_usd": 0.108,+ "at": "2026-11-06T00:02:44"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/6d6922074045c19c9d97bcbe6669baea.pdf",+ "pages": 41,+ "sha256": "5765a1e6b849401b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 24,+ "described": 24,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ft240xs-r.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 8.7,+ 1.65+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9e0654855743c5437aa9f4979b47c0dc621f54be5ccb6b51a2f0a01b2ec9981f",+ "checked": "2026-11-06",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ft240xs-r-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 8.7,+ 1.65+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a5989a3911d2946aadb37180b038f99fe70e7c55265b96d088847c1a488a3ba4",+ "checked": "2026-11-06",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "package_dims": {+ "package_code": "SSOP-24",+ "source_page": 32,+ "D": {+ "nom_mm": 8.66,+ "range_mm": [+ null,+ null+ ]+ },+ "E1": {+ "nom_mm": 3.91,+ "range_mm": [+ null,+ null+ ]+ },+ "E": {+ "nom_mm": 5.99,+ "range_mm": [+ null,+ null+ ]+ },+ "e": {+ "nom_mm": 0.635,+ "range_mm": [+ null,+ null+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "ft240xs-r.step",+ "verdict": "PASS",+ "reasons": [+ "body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ft240xs-r</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ft240xs-r</title>