component
FT232RQ-REEL
Public Made by Adomby adom
FTDI USB Converters, QFN-32-EP(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
ft232rq-reel: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
7814323
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350
{
"schema_version": 1,
"type": "component",
"slug": "ft232rq-reel",
"title": "FT232RQ-REEL",
"brief": "FTDI USB Converters, QFN-32-EP(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"ft232rq-reel"
],
"component": {
"mpn": "FT232RQ-REEL",
"manufacturer": "FTDI",
"package": "QFN-32-EP(5x5)",
"pin_count": 32,
"category": "Interface",
"subcategory": "USB Converters",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/cddab285e3c54edf9625415e7fadc3ec.pdf",
"parts": {
"symbol": "ft232rq-reel.kicad_sym",
"footprint": "ft232rq-reel.kicad_mod",
"model_3d": "ft232rq-reel-etched.glb",
"model_3d_plain": "ft232rq-reel.glb",
"model_3d_step": "ft232rq-reel-etched.step",
"model_3d_step_plain": "ft232rq-reel.step",
"lbr": "ft232rq-reel.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "VCCIO",
"type": "power_in",
"description": "+1.8 V to +5.25 V supply for the UART interface and CBUS group pins. Tie to 3V3OUT for 3.3 V I/O or to VCC for +5 V CMOS I/O; may also be supplied from an external +1.8 V to +2.8 V rail sourced from the same supply as VCC."
},
{
"number": "2",
"name": "RXD",
"type": "input",
"description": "Receiving asynchronous data input."
},
{
"number": "3",
"name": "RI#",
"type": "input",
"description": "Ring Indicator control input. When remote wake-up is enabled in EEPROM, driving RI# low (20 ms active-low pulse) resumes the USB host from suspend."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Device digital ground supply pin."
},
{
"number": "5",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Do not connect."
},
{
"number": "6",
"name": "DSR#",
"type": "input",
"description": "Data Set Ready control input / handshake signal."
},
{
"number": "7",
"name": "DCD#",
"type": "input",
"description": "Data Carrier Detect control input."
},
{
"number": "8",
"name": "CTS#",
"type": "input",
"description": "Clear To Send control input / handshake signal."
},
{
"number": "9",
"name": "CBUS4",
"type": "output",
"description": "Configurable CBUS output-only pin. EEPROM-configurable; factory default is SLEEP#. Available options include TXDEN, PWREN#, TXLED#, RXLED#, TX&RXLED#, SLEEP#, CLK48/24/12/6."
},
{
"number": "10",
"name": "CBUS2",
"type": "bidirectional",
"description": "Configurable CBUS I/O pin. EEPROM-configurable; factory default is TXDEN. Options include TXDEN, PWREN#, TXLED#, RXLED#, TX&RXLED#, SLEEP#, CLKx, CBitBangI/O, BitBangWRn, BitBangRDn."
},
{
"number": "11",
"name": "CBUS3",
"type": "bidirectional",
"description": "Configurable CBUS I/O pin. EEPROM-configurable; factory default is PWREN# (requires 10 kΩ pull-up to VCCIO)."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Do not connect."
},
{
"number": "13",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Do not connect."
},
{
"number": "14",
"name": "USBDP",
"type": "bidirectional",
"description": "USB D+ data signal. Incorporates internal series resistor and 1.5 kΩ pull-up to +3.3 V for Full-Speed identification."
},
{
"number": "15",
"name": "USBDM",
"type": "bidirectional",
"description": "USB D- data signal. Incorporates internal series resistor."
},
{
"number": "16",
"name": "3V3OUT",
"type": "power_out",
"description": "+3.3 V output from the integrated LDO regulator; decouple to ground with a 100 nF capacitor. Supplies the internal USB transceiver and USBDP pull-up; up to 50 mA available for external logic and may also feed VCCIO."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Device digital ground supply pin."
},
{
"number": "18",
"name": "RESET#",
"type": "input",
"description": "Active-low reset input. Can be driven by an external device to reset the FT232R; leave unconnected or pull up to VCC if unused."
},
{
"number": "19",
"name": "VCC",
"type": "power_in",
"description": "+3.3 V to +5.25 V supply to the device core. Minimum operating voltage is +4.0 V when using the internal clock generator; +3.3 V operation is possible when driven by an external crystal oscillator."
},
{
"number": "20",
"name": "GND",
"type": "power_in",
"description": "Device digital ground supply pin."
},
{
"number": "21",
"name": "CBUS1",
"type": "bidirectional",
"description": "Configurable CBUS I/O pin. EEPROM-configurable; factory default is RXLED#."
},
{
"number": "22",
"name": "CBUS0",
"type": "bidirectional",
"description": "Configurable CBUS I/O pin. EEPROM-configurable; factory default is TXLED#."
},
{
"number": "23",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Do not connect."
},
{
"number": "24",
"name": "AGND",
"type": "power_in",
"description": "Device analogue ground supply for the internal clock multiplier."
},
{
"number": "25",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Do not connect."
},
{
"number": "26",
"name": "TEST",
"type": "input",
"description": "IC test-mode enable. Must be tied to GND for normal operation, otherwise the device will appear to fail."
},
{
"number": "27",
"name": "OSCI",
"type": "input",
"description": "12 MHz oscillator cell input. Optional; leave unconnected for normal operation with the internal oscillator. Used with an external crystal, ceramic resonator, or oscillator."
},
{
"number": "28",
"name": "OSCO",
"type": "output",
"description": "12 MHz oscillator cell output. Optional; leave unconnected for normal operation with the internal oscillator."
},
{
"number": "29",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Do not connect."
},
{
"number": "30",
"name": "TXD",
"type": "output",
"description": "Transmit asynchronous data output."
},
{
"number": "31",
"name": "DTR#",
"type": "output",
"description": "Data Terminal Ready control output / handshake signal."
},
{
"number": "32",
"name": "RTS#",
"type": "output",
"description": "Request To Send control output / handshake signal."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/cddab285e3c54edf9625415e7fadc3ec.pdf",
"pages": 47,
"sha256": "436f260dbc99dcab",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 32,
"described": 32,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft232rq-reel.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft232rq-reel-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c5d12b73a706f3648c99e2974d56ff5bae1e4c86d0a028f026b813904cd2c777",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "FTDI",
"Package": "QFN-32-EP(5x5)",
"Category": "Interface",
"Pins": "32"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ft232rq-reel"
],
"discovery_pitch": "FT232RQ-REEL (FTDI) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft232rq-reel.kicad_sym",
"ft232rq-reel.kicad_mod",
"ft232rq-reel.glb",
"ft232rq-reel.step",
"ft232rq-reel.lbr",
"docs/hero.png",
"docs/ft232rq-reel-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft232rq-reel-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "FT232RQ-Reel",
"kind": "packaging"
},
{
"mpn": "FT232RQ-Tray",
"kind": "unknown"
},
{
"mpn": "FT232RL-Reel",
"kind": "unknown"
},
{
"mpn": "FT232RL-Tube",
"kind": "unknown"
}
],
"updated_at": "2026-09-24T20:49:26.205Z"
}