component
FT232BL-JSM
Public Made by Adomby adom
JSMSEMI USB ICs, QFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
5d161f3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366
{
"schema_version": 1,
"type": "component",
"slug": "ft232bl-jsm",
"title": "FT232BL-JSM",
"brief": "JSMSEMI USB ICs, QFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"communication interface chip-uart-485-232",
"ft232bl-jsm",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "FT232BL-JSM",
"manufacturer": "JSMSEMI",
"package": "QFP-32(7x7)",
"pin_count": 32,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "USB ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/72bf3156c62c12f021f30f5b4e36c552.pdf",
"parts": {
"symbol": "ft232bl-jsm.kicad_sym",
"footprint": "ft232bl-jsm.kicad_mod",
"model_3d": "ft232bl-jsm-hero.glb",
"model_3d_plain": "ft232bl-jsm-etched.glb",
"model_3d_step": "ft232bl-jsm-etched.step",
"model_3d_step_plain": "ft232bl-jsm.step",
"lbr": "ft232bl-jsm.lbr"
},
"distributor_links": {
"lcsc": "C7436405"
},
"distributor_check": {
"checked_at": "2026-11-04T23:28:53Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "EESK",
"type": "output",
"description": "Clock signal to the EEPROM, tri-stated during device reset and driven otherwise; a 10K pull-down on EESK makes the device use USB product ID 6004 (hex) instead of 6001."
},
{
"number": "2",
"name": "EEDATA",
"type": "bidirectional",
"description": "EEPROM data I/O connected to the EEPROM data input directly and to its data output through a 2.2K resistor, with the EEPROM data output pulled up to VCC by 10K; tri-stated during device reset."
},
{
"number": "3",
"name": "VCC",
"type": "power_in",
"description": "+4.35V to +5.25V supply to the device core, LDO and non-UART interface pins."
},
{
"number": "4",
"name": "RESET#",
"type": "input",
"description": "Input that lets an external device reset the FT232BL; connect to VCC if not needed."
},
{
"number": "5",
"name": "RSTOUT#",
"type": "output",
"description": "Internal reset generator output that stays high impedance for about 5ms after VCC exceeds 3.5V, then clamps to the 3.3V regulator output; also driven low when RESET# is low and unaffected by USB bus reset."
},
{
"number": "6",
"name": "3V3OUT",
"type": "power_out",
"description": "Output of the integrated 3.3V LDO, to be decoupled to GND with a 33nF ceramic capacitor close to the pin, supplying the USB transceiver and RSTOUT# and able to source up to 5mA to external 3.3V logic."
},
{
"number": "7",
"name": "USBDP",
"type": "bidirectional",
"description": "USB data signal plus, requiring a 1.5k pull-up to 3V3OUT or RSTOUT#."
},
{
"number": "8",
"name": "USBDM",
"type": "bidirectional",
"description": "USB data signal minus."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Device ground supply pin."
},
{
"number": "10",
"name": "SLEEP#",
"type": "output",
"description": "Goes low during USB suspend mode, typically used to power down an external TTL-to-RS232 level converter in USB to RS232 designs."
},
{
"number": "11",
"name": "RXLED#",
"type": "output",
"description": "Open-collector LED driver that pulses low when receiving data over USB."
},
{
"number": "12",
"name": "TXLED#",
"type": "output",
"description": "Open-collector LED driver that pulses low when transmitting data over USB."
},
{
"number": "13",
"name": "VCCIO",
"type": "power_in",
"description": "+3.0V to +5.25V supply to the UART interface pins 10..12, 14..16 and 18..25, connected to the 3.3V supply of external logic or to VCC for 5V CMOS levels."
},
{
"number": "14",
"name": "PWRCTL",
"type": "input",
"description": "Power control input: low for bus powered, high for self powered (to VCCIO)."
},
{
"number": "15",
"name": "PWREN#",
"type": "output",
"description": "Low after the device is configured over USB and high during USB suspend, usable to drive a P-channel logic-level MOSFET switch for external logic power, which requires the interface pull-down option enabled in the EEPROM."
},
{
"number": "16",
"name": "TXDEN",
"type": "output",
"description": "Enables transmit data for RS485."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Device ground supply pin."
},
{
"number": "18",
"name": "RI#",
"type": "input",
"description": "Ring indicator control input that can be pulled low to resume the PC USB host controller when the remote wake-up option is enabled in the EEPROM."
},
{
"number": "19",
"name": "DCD#",
"type": "input",
"description": "Data carrier detect control input."
},
{
"number": "20",
"name": "DSR#",
"type": "input",
"description": "Data set ready control input / handshake signal."
},
{
"number": "21",
"name": "DTR#",
"type": "output",
"description": "Data terminal ready control output / handshake signal."
},
{
"number": "22",
"name": "CTS#",
"type": "input",
"description": "Clear to send control input / handshake signal."
},
{
"number": "23",
"name": "RTS#",
"type": "output",
"description": "Request to send control output / handshake signal."
},
{
"number": "24",
"name": "RXD",
"type": "input",
"description": "Receive asynchronous data input."
},
{
"number": "25",
"name": "TXD",
"type": "output",
"description": "Transmit asynchronous data output."
},
{
"number": "26",
"name": "VCC",
"type": "power_in",
"description": "+4.35V to +5.25V supply to the device core, LDO and non-UART interface pins."
},
{
"number": "27",
"name": "XTIN",
"type": "input",
"description": "Input to the 6MHz crystal oscillator, which can also be driven by an external 6MHz clock whose switching threshold is VCC/2, so it must be driven at 5V CMOS level or AC coupled around VCC/2."
},
{
"number": "28",
"name": "XTOUT",
"type": "output",
"description": "Output of the 6MHz crystal oscillator, which stops oscillating during USB suspend."
},
{
"number": "29",
"name": "AGND",
"type": "power_in",
"description": "Analog ground for the internal x8 clock multiplier."
},
{
"number": "30",
"name": "AVCC",
"type": "power_in",
"description": "Analog power supply for the internal x8 clock multiplier."
},
{
"number": "31",
"name": "TEST",
"type": "input",
"description": "Puts the device into I.C. test mode and must be connected to GND for normal operation."
},
{
"number": "32",
"name": "EECS",
"type": "bidirectional",
"description": "EEPROM chip select, pulled to GND with a 10K resistor for 48MHz operation and needing no resistor for 6MHz operation; tri-stated during device reset."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "vision",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin 14 is named PWRCTL# in the pin table (p.6) but PWRCTL on the pin diagram (p.1) and POWERCTL in t; TXLED# and RXLED# are listed as O.C. (open collector) in the table. No matching ERC class exists, so; The datasheet text has Chinese descriptions. Descriptions were translated and condensed from the pin",
"vision extraction: provenance cannot be text-verified; needs consensus"
],
"pages_sent": 12,
"cost_usd": 0.336,
"at": "2026-11-04T23:28:36"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/72bf3156c62c12f021f30f5b4e36c552.pdf",
"pages": 20,
"sha256": "58ff7747de655db7",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 32,
"described": 32,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ft232bl-jsm.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",
"checked": "2026-11-04",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ft232bl-jsm-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9a5556ef8451a7b1d7433cf7eec282887036cb108759949674656eea1937ee41",
"checked": "2026-11-04",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "JSMSEMI",
"Package": "QFP-32(7x7)",
"Category": "Communication Interface Chip/UART/485/232",
"Pins": "32"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ft232bl-jsm"
],
"discovery_pitch": "FT232BL-JSM (JSMSEMI) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ft232bl-jsm.kicad_sym",
"ft232bl-jsm.kicad_mod",
"ft232bl-jsm.glb",
"ft232bl-jsm.step",
"ft232bl-jsm.lbr",
"docs/hero.png",
"docs/ft232bl-jsm-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ft232bl-jsm-hero.glb",
"ft232bl-jsm-hero.overlay.json",
"ft232bl-jsm-etched.glb"
],
"visibility": {
"public": true
}
}