component
FT230XS-U
Public Made by Adomby adom
FTDI USB ICs, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFT230XS-U
FTDI · USB ICs · SSOP-16-150mil
FT230XS-U from FTDI, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | output | Transmit asynchronous data output. |
| 2 | RTS# | output | Request to Send control output / handshake signal (active low). |
| 3 | VCCIO | power_in | 1V8 - 3V3 supply for the IO cells. |
| 4 | RXD | input | Receiving asynchronous data input. |
| 5 | GND | power_in | 0V ground input. |
| 6 | CTS# | input | Clear To Send control input / handshake signal (active low). |
| 7 | CBUS2 | bidirectional | Configurable CBUS I/O pin set in MTP memory; default configuration is TXLED#. |
| 8 | USBDP | bidirectional | USB data signal plus. |
| 9 | USBDM | bidirectional | USB data signal minus. |
| 10 | 3V3OUT | power_out | 3V3 output at 50mA, may be used to power VCCIO; when VCC is 3V3 this pin is an input and should be connected to pin 12. |
| 11 | RESET# | input | Reset input (active low). |
| 12 | VCC | power_in | 5 V (or 3V3) supply to the IC; if VCC is 3V3 then 3V3OUT must also be driven with 3V3. |
| 13 | GND | power_in | 0V ground input. |
| 14 | CBUS1 | bidirectional | Configurable CBUS I/O pin set in MTP memory; default configuration is RXLED#. |
| 15 | CBUS0 | bidirectional | Configurable CBUS I/O pin set in MTP memory; default configuration is TXDEN. |
| 16 | CBUS3 | bidirectional | Configurable CBUS I/O pin set in MTP memory; default configuration is SLEEP#. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI |
| Package | SSOP-16-150mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 16 | |||
| Ambient Operating Temperature (Power Applied) | -40 | 85 | °C | 16 | |||
| VCC Supply Voltage | VCC | -0.3 | 5.5 | V | 16 | ||
| VCCIO IO Voltage | VCCIO | -0.3 | 4 | V | 16 | ||
| DC Input Voltage, USBDP and USBDM | -0.5 | 3.63 | V | 16 | |||
| DC Input Voltage, High Impedance Bi-directionals | -0.3 | 5.8 | V | powered from VCCIO | 16 | ||
| DC Output Current, Outputs | 22 | mA | 16 | ||||
| VCC Operating Supply Voltage | VCC | 2.97 | 5 | 5.5 | V | Normal Operation | 17 |
| VCCIO Operating Supply Voltage | VCC2 | 1.62 | 3.63 | V | 17 | ||
| Operating Supply Current | Icc1 | 6.5 | 8 | 8.3 | mA | Normal Operation | 17 |
| Operating Supply Current (suspend) | Icc2 | 125 | μA | USB Suspend | 17 | ||
| 3.3V regulator output | 3V3 | 2.97 | 3.3 | 3.63 | V | VCC must be greater than 3V3 otherwise 3V3OUT is an input which must be driven with 3.3V | 17 |
| Output Voltage High (VCCIO=3.3V) | Voh | 2.97 | V | Ioh = +/-2mA; VCCIO = +3.3V | 18 | ||
| Output Voltage Low (VCCIO=3.3V) | Vol | 0 | 0.4 | V | Iol = +/-2mA; VCCIO = +3.3V | 18 | |
| Input low Switching Threshold (VCCIO=3.3V) | Vil | 0.8 | V | LVTTL | 18 | ||
| Input High Switching Threshold (VCCIO=3.3V) | Vih | 2 | V | LVTTL | 18 | ||
| Input pull-up resistance (VCCIO=3.3V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 18 |
| Input pull-down resistance (VCCIO=3.3V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 18 |
| Input Leakage Current (VCCIO=3.3V) | Iin | -10 | 1 | 10 | μA | Vin = 0 | 18 |
| Tri-state output leakage current (VCCIO=3.3V) | Ioz | -10 | 1 | 10 | μA | Vin = 5.5V or 0 | 18 |
| Switching Threshold (VCCIO=3.3V) | Vt | 1.49 | V | LVTTL | 18 | ||
| Schmitt trigger negative going threshold (VCCIO=3.3V) | Vt- | 1.15 | V | 18 | |||
| Schmitt trigger positive going threshold (VCCIO=3.3V) | Vt+ | 1.64 | V | 18 | |||
| Output Voltage High (VCCIO=2.5V) | Voh | 2.25 | V | Ioh = +/-2mA; VCCIO = +2.5V | 19 | ||
| Output Voltage Low (VCCIO=2.5V) | Vol | 0 | 0.4 | V | Iol = +/-2mA; VCCIO = +2.5V | 19 | |
| Input low Switching Threshold (VCCIO=2.5V) | Vil | 0.8 | V | LVTTL | 19 | ||
| Input High Switching Threshold (VCCIO=2.5V) | Vih | 0.8 | V | LVTTL | 19 | ||
| Input pull-up resistance (VCCIO=2.5V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 19 |
| Input pull-down resistance (VCCIO=2.5V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 19 |
| Input Leakage Current (VCCIO=2.5V) | Iin | -10 | 1 | 10 | μA | Vin = 0 | 19 |
| Tri-state output leakage current (VCCIO=2.5V) | Ioz | -10 | 1 | 10 | μA | Vin = 5.5V or 0 | 19 |
| Switching Threshold (VCCIO=2.5V) | Vt | 1.1 | V | LVTTL | 19 | ||
| Schmitt trigger negative going threshold (VCCIO=2.5V) | Vt- | 0.8 | V | 19 | |||
| Schmitt trigger positive going threshold (VCCIO=2.5V) | Vt+ | 1.2 | V | 19 | |||
| Output Voltage High (VCCIO=1.8V) | Voh | 1.62 | V | Ioh = +/-2mA; VCCIO = +1.8V | 20 | ||
| Output Voltage Low (VCCIO=1.8V) | Vol | 0 | 0.4 | V | Iol = +/-2mA; VCCIO = +1.8V | 20 | |
| Input low Switching Threshold (VCCIO=1.8V) | Vil | 0.77 | V | LVTTL | 20 | ||
| Input High Switching Threshold (VCCIO=1.8V) | Vih | 1.6 | V | LVTTL | 20 | ||
| Input pull-up resistance (VCCIO=1.8V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 20 |
| Input pull-down resistance (VCCIO=1.8V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 20 |
| Input Leakage Current (VCCIO=1.8V) | Iin | -10 | 1 | 10 | μA | Vin = 0 | 20 |
| Tri-state output leakage current (VCCIO=1.8V) | Ioz | -10 | 1 | 10 | μA | Vin = 5.5V or 0 | 20 |
| Switching Threshold (VCCIO=1.8V) | Vt | 0.77 | V | LVTTL | 20 | ||
| Schmitt trigger negative going threshold (VCCIO=1.8V) | Vt- | 0.557 | V | 20 | |||
| Schmitt trigger positive going threshold (VCCIO=1.8V) | Vt+ | 0.893 | V | 20 | |||
| USB Output Voltage Low | Vol | 0.2 | V | USBDP, USBDM | 21 | ||
| USB Input low Switching Threshold | Vil | 0.8 | V | USBDP, USBDM | 21 | ||
| USB Input High Switching Threshold | Vih | 2 | V | USBDP, USBDM | 21 | ||
| Internal Clock Frequency of Operation | 11.98 | 12 | 12.02 | MHz | Equivalent to +/-1667ppm | 21 | |
| Internal Clock Period | 83.19 | 83.33 | 83.47 | ns | 21 | ||
| Internal Clock Duty Cycle | 45 | 50 | 55 | % | 21 | ||
| MTP Data Retention | 10 | Years | 21 | ||||
| MTP Write Cycle | 2000 | Cycles | 21 |
CAD (KiCad official)
- Symbol:
FT230XS-U - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ft230xs-u-etched.step/ft230xs-u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft230xs-u.step/ft230xs-u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FTDI datasheet (44 pp, sha256
4ea7865c091f270e, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).