component
FT230XS-R
Public Made by Adomby adom
FTDI USB Converters, SSOP-16-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownFT230XS-R
FTDI · USB Converters · SSOP-16-150mil
FT230XS-R from FTDI, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | output | Transmit Asynchronous Data Output. TTL-level UART TX; 3.3V CMOS drive, tolerant of 5V input. Configurable output drive strength 4 mA (min) to 16 mA (max). |
| 2 | RTS# | output | Request To Send control output / handshake signal. Active low. Used for UART hardware flow control. |
| 3 | VCCIO | power_in | 1.8V - 3.3V supply for the I/O cells. Sets the logic level for UART and CBUS pins independently of the core VCC. |
| 4 | RXD | input | Receiving Asynchronous Data Input. TTL-level UART RX input, tolerant to 5V. Operates down to 1V with external pull-ups. |
| 5 | GND | power_in | 0V ground input. Tie to system ground along with pin 13. |
| 6 | CTS# | input | Clear To Send control input / handshake signal. Active low. Used for UART hardware flow control. |
| 7 | CBUS2 | bidirectional | Configurable CBUS I/O pin. Default configuration is TXLED#. Function is configured in the device MTP memory (see CBUS Signal Options, Table 3.7). Pulled to VCCIO via internal ~75kΩ resistor when in input mode. |
| 8 | USBDP | bidirectional | USB Data Signal Plus. USB 2.0 full-speed differential D+ line. Integrated 1.5k pull-up. |
| 9 | USBDM | bidirectional | USB Data Signal Minus. USB 2.0 full-speed differential D- line. |
| 10 | 3V3OUT | power_out | 3.3V output at 50mA from the internal LDO regulator. May be used to power VCCIO. When VCC is 3.3V, pin 10 becomes an input pin and should be connected to pin 12 (VCC). |
| 11 | RESET# | input | Reset input, active low. Tie high (to 3V3OUT) for normal operation; pull low to reset the device. |
| 12 | VCC | power_in | 5V (or 3.3V) supply to the IC core. Powers the internal LDO regulators and USB transceiver. If VCC is 3.3V then 3V3OUT (pin 10) must also be driven with 3.3V input. |
| 13 | GND | power_in | 0V ground input. Tie to system ground along with pin 5. |
| 14 | CBUS1 | bidirectional | Configurable CBUS I/O pin. Default configuration is RXLED#. Function is configured in the device MTP memory (see CBUS Signal Options, Table 3.7). Pulled to VCCIO via internal ~75kΩ resistor when in input mode. |
| 15 | CBUS0 | bidirectional | Configurable CBUS I/O pin. Default configuration is TXDEN. Function is configured in the device MTP memory (see CBUS Signal Options, Table 3.7). Pulled to VCCIO via internal ~75kΩ resistor when in input mode. |
| 16 | CBUS3 | bidirectional | Configurable CBUS I/O pin. Default configuration is SLEEP#. Function is configured in the device MTP memory (see CBUS Signal Options, Table 3.7). Pulled to VCCIO via internal ~75kΩ resistor when in input mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI |
| Package | SSOP-16-150mil |
| Category | Interface |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
FT230XS-RRFT230XS-RUFT230XS-RT
CAD (KiCad official)
- Symbol:
FT230XS-R - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ft230xs-r-etched.step/ft230xs-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft230xs-r.step/ft230xs-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FTDI datasheet (44 pp, sha256
d780bd196b774a58, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).