FT2232HPQ-TRAY

{
  "schema_version": 1,
  "type": "component",
  "slug": "ft2232hpq-tray",
  "title": "FT2232HPQ-TRAY",
  "brief": "FTDI USB ICs, QFN-68(8x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "ft2232hpq-tray",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "FT2232HPQ-TRAY",
    "manufacturer": "FTDI",
    "package": "QFN-68(8x8)",
    "pin_count": 69,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "USB ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/cbe7e76eafc4f7cb65ae77dda16a0315.pdf",
    "parts": {
      "symbol": "ft2232hpq-tray.kicad_sym",
      "footprint": "ft2232hpq-tray.kicad_mod",
      "model_3d": "ft2232hpq-tray-hero.glb",
      "model_3d_plain": "ft2232hpq-tray-etched.glb",
      "model_3d_step": "ft2232hpq-tray-etched.step",
      "model_3d_step_plain": "ft2232hpq-tray.step",
      "lbr": "ft2232hpq-tray.lbr"
    },
    "distributor_links": {
      "lcsc": "C3228692",
      "digikey": "768-FT2232HPQ-TRAY-ND",
      "mouser": "895-FT2232HPQ-TRAY"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T01:45:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "768-FT2232HPQ-TRAY-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "895-FT2232HPQ-TRAY",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EECLK",
        "type": "output",
        "description": "Clock signal output to the EEPROM, tri-state during device reset."
      },
      {
        "number": "2",
        "name": "EEDATA",
        "type": "bidirectional",
        "description": "EEPROM data I/O, connected directly to EEPROM Data-In and to Data-Out via a 2.2K resistor with Data-Out pulled to VCC via 10K; tri-state during reset."
      },
      {
        "number": "3",
        "name": "TEST",
        "type": "input",
        "description": "IC test pin, connect to GND for normal operation."
      },
      {
        "number": "4",
        "name": "RESET#",
        "type": "input",
        "description": "Active-low reset input; tie to VCCIO (+3.3V) if not used."
      },
      {
        "number": "5",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "GPIO3 pin, default function is input with weak pull-down."
      },
      {
        "number": "6",
        "name": "ADBUS0",
        "type": "bidirectional",
        "description": "Channel A I/O bit 0 (TXD in RS232, D0 in FIFO/bit-bang, TCK/SK in MPSSE, AD0 in host bus emulation)."
      },
      {
        "number": "7",
        "name": "ADBUS1",
        "type": "bidirectional",
        "description": "Channel A I/O bit 1 (RXD in RS232, D1 in FIFO/bit-bang, TDI/DO in MPSSE, AD1 in host bus emulation)."
      },
      {
        "number": "8",
        "name": "VCORE",
        "type": "power_in",
        "description": "+1.2V core supply input; connect to VREGOUT when using the internal regulator."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "10",
        "name": "VCCIO",
        "type": "power_in",
        "description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device fails."
      },
      {
        "number": "11",
        "name": "ADBUS2",
        "type": "bidirectional",
        "description": "Channel A I/O bit 2 (RTS# in RS232, D2 in FIFO/bit-bang, TDO/DI in MPSSE, AD2 in host bus emulation)."
      },
      {
        "number": "12",
        "name": "ADBUS3",
        "type": "bidirectional",
        "description": "Channel A I/O bit 3 (CTS# in RS232, D3 in FIFO/bit-bang, TMS/CS in MPSSE, AD3 in host bus emulation)."
      },
      {
        "number": "13",
        "name": "ADBUS4",
        "type": "bidirectional",
        "description": "Channel A I/O bit 4 (DTR# in RS232, D4 in FIFO/bit-bang, GPIOL0 in MPSSE, AD4 in host bus emulation)."
      },
      {
        "number": "14",
        "name": "ADBUS5",
        "type": "bidirectional",
        "description": "Channel A I/O bit 5 (DSR# in RS232, D5 in FIFO/bit-bang, GPIOL1 in MPSSE, AD5 in host bus emulation)."
      },
      {
        "number": "15",
        "name": "ADBUS6",
        "type": "bidirectional",
        "description": "Channel A I/O bit 6 (DCD# in RS232, D6 in FIFO/bit-bang, GPIOL2 in MPSSE, AD6 in host bus emulation)."
      },
      {
        "number": "16",
        "name": "ADBUS7",
        "type": "bidirectional",
        "description": "Channel A I/O bit 7 (RI# in RS232, D7 in FIFO/bit-bang, GPIOL3 in MPSSE, AD7 in host bus emulation)."
      },
      {
        "number": "17",
        "name": "ACBUS0",
        "type": "bidirectional",
        "description": "Channel A control bit 0 (TXDEN in RS232, RXF# in FIFO, GPIOH0 in MPSSE, CS# in CPU-style FIFO, A8 in host bus emulation)."
      },
      {
        "number": "18",
        "name": "ACBUS1",
        "type": "bidirectional",
        "description": "Channel A control bit 1 (TXE# in FIFO, WRSTB# in bit-bang, GPIOH1 in MPSSE, A0 in CPU-style FIFO, A9 in host bus emulation)."
      },
      {
        "number": "19",
        "name": "ACBUS2",
        "type": "bidirectional",
        "description": "Channel A control bit 2 (RD# in FIFO, RDSTB# in bit-bang, GPIOH2 in MPSSE, A10 in host bus emulation)."
      },
      {
        "number": "20",
        "name": "ACBUS3",
        "type": "bidirectional",
        "description": "Channel A control bit 3 (RXLED# in RS232, WR# in FIFO, GPIOH3 in MPSSE, A11 in host bus emulation)."
      },
      {
        "number": "21",
        "name": "ACBUS4",
        "type": "bidirectional",
        "description": "Channel A control bit 4 (TXLED# in RS232, SIWUA in FIFO/bit-bang, GPIOH4 in MPSSE, A12 in host bus emulation); tie SIWU to VCCIO if unused."
      },
      {
        "number": "22",
        "name": "ACBUS5",
        "type": "bidirectional",
        "description": "Channel A control bit 5 (CLKOUT in synchronous FIFO, GPIOH5 in MPSSE, A13 in host bus emulation)."
      },
      {
        "number": "23",
        "name": "ACBUS6",
        "type": "bidirectional",
        "description": "Channel A control bit 6 (OE# in synchronous FIFO, GPIOH6 in MPSSE, A14 in host bus emulation)."
      },
      {
        "number": "24",
        "name": "ACBUS7",
        "type": "bidirectional",
        "description": "Channel A control bit 7 (GPIOH7 in MPSSE, A15 in host bus emulation)."
      },
      {
        "number": "25",
        "name": "VCORE",
        "type": "power_in",
        "description": "+1.2V core supply input; connect to VREGOUT when using the internal regulator."
      },
      {
        "number": "26",
        "name": "VCCIO",
        "type": "power_in",
        "description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device fails."
      },
      {
        "number": "27",
        "name": "OSCI",
        "type": "input",
        "description": "Oscillator input (12 MHz crystal)."
      },
      {
        "number": "28",
        "name": "OSCO",
        "type": "output",
        "description": "Oscillator output (12 MHz crystal)."
      },
      {
        "number": "29",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "30",
        "name": "VREGIN",
        "type": "power_in",
        "description": "+3.3V input to the integrated 1.2V voltage regulator."
      },
      {
        "number": "31",
        "name": "VREGOUT",
        "type": "power_out",
        "description": "+1.2V regulator output; connect to VCORE with a 3.3uF filter capacitor and do not use to power other circuits."
      },
      {
        "number": "32",
        "name": "FSOURCE",
        "type": "power_in",
        "description": "FSOURCE input pin for EFUSE; leave floating for normal operation."
      },
      {
        "number": "33",
        "name": "VPP",
        "type": "power_in",
        "description": "VPP input pin for EFUSE; leave floating for normal operation."
      },
      {
        "number": "34",
        "name": "BDBUS0",
        "type": "bidirectional",
        "description": "Channel B I/O bit 0 (TXD in RS232, D0 in FIFO/bit-bang, TCK/SK in MPSSE, FSDI in fast serial, CS# in host bus emulation)."
      },
      {
        "number": "35",
        "name": "BDBUS1",
        "type": "bidirectional",
        "description": "Channel B I/O bit 1 (RXD in RS232, D1 in FIFO/bit-bang, TDI/DO in MPSSE, FSCLK in fast serial, ALE in host bus emulation)."
      },
      {
        "number": "36",
        "name": "BDBUS2",
        "type": "bidirectional",
        "description": "Channel B I/O bit 2 (RTS# in RS232, D2 in FIFO/bit-bang, TDO/DI in MPSSE, FSDO in fast serial, RD# in host bus emulation)."
      },
      {
        "number": "37",
        "name": "BDBUS3",
        "type": "bidirectional",
        "description": "Channel B I/O bit 3 (CTS# in RS232, D3 in FIFO/bit-bang, TMS/CS in MPSSE, FSCTS in fast serial, WR# in host bus emulation)."
      },
      {
        "number": "38",
        "name": "BDBUS4",
        "type": "bidirectional",
        "description": "Channel B I/O bit 4 (DTR# in RS232, D4 in FIFO/bit-bang, GPIOL0 in MPSSE, IORDY in host bus emulation)."
      },
      {
        "number": "39",
        "name": "VCCIO",
        "type": "power_in",
        "description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device fails."
      },
      {
        "number": "40",
        "name": "BDBUS5",
        "type": "bidirectional",
        "description": "Channel B I/O bit 5 (DSR# in RS232, D5 in FIFO/bit-bang, GPIOL1 in MPSSE, CLKOUT in host bus emulation)."
      },
      {
        "number": "41",
        "name": "BDBUS6",
        "type": "bidirectional",
        "description": "Channel B I/O bit 6 (DCD# in RS232, D6 in FIFO/bit-bang, GPIOL2 in MPSSE, I/O0 in host bus emulation)."
      },
      {
        "number": "42",
        "name": "BDBUS7",
        "type": "bidirectional",
        "description": "Channel B I/O bit 7 (RI# in RS232, D7 in FIFO/bit-bang, GPIOL3 in MPSSE, I/O1 in host bus emulation)."
      },
      {
        "number": "43",
        "name": "SUSPEND#",
        "type": "output",
        "description": "Active-low output asserted when USB is in suspend mode."
      },
      {
        "number": "44",
        "name": "VCORE",
        "type": "power_in",
        "description": "+1.2V core supply input; connect to VREGOUT when using the internal regulator."
      },
      {
        "number": "45",
        "name": "BCBUS0",
        "type": "bidirectional",
        "description": "Channel B control bit 0 (TXDEN in RS232, RXF# in FIFO, GPIOH0 in MPSSE, CS# in CPU-style FIFO)."
      },
      {
        "number": "46",
        "name": "BCBUS1",
        "type": "bidirectional",
        "description": "Channel B control bit 1 (TXE# in FIFO, WRSTB# in bit-bang, GPIOH1 in MPSSE, A0 in CPU-style FIFO)."
      },
      {
        "number": "47",
        "name": "BCBUS2",
        "type": "bidirectional",
        "description": "Channel B control bit 2 (RD# in FIFO, RDSTB# in bit-bang, GPIOH2 in MPSSE)."
      },
      {
        "number": "48",
        "name": "BCBUS3",
        "type": "bidirectional",
        "description": "Channel B control bit 3 (RXLED# in RS232, WR# in FIFO, GPIOH3 in MPSSE)."
      },
      {
        "number": "49",
        "name": "BCBUS4",
        "type": "bidirectional",
        "description": "Channel B control bit 4 (TXLED# in RS232, SIWUB in FIFO/bit-bang, GPIOH4 in MPSSE); tie SIWU to VCCIO if unused."
      },
      {
        "number": "50",
        "name": "BCBUS5",
        "type": "bidirectional",
        "description": "Channel B control bit 5 (GPIOH5 in MPSSE)."
      },
      {
        "number": "51",
        "name": "VCCIO",
        "type": "power_in",
        "description": "+3.3V I/O interface power supply input; all VCCIO pins must be connected or the device fails."
      },
      {
        "number": "52",
        "name": "BCBUS6",
        "type": "bidirectional",
        "description": "Channel B control bit 6 (GPIOH6 in MPSSE)."
      },
      {
        "number": "53",
        "name": "BCBUS7",
        "type": "bidirectional",
        "description": "Channel B control bit 7 (PWRSAV# in most modes, GPIOH7 in MPSSE)."
      },
      {
        "number": "54",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "GPIO2 or I2C_INT# pin, default function is GPIO2 input with weak pull-down."
      },
      {
        "number": "55",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "GPIO1 or I2C_SCL pin, default function is GPIO1 input with weak pull-down."
      },
      {
        "number": "56",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "GPIO0 or I2C_SDA pin, default function is GPIO0 input with weak pull-down."
      },
      {
        "number": "57",
        "name": "VCC_USB",
        "type": "power_in",
        "description": "+3.3V input for the internal USB PHY; must come from a +3.3V regulator (not directly from USB supply), LC filtering recommended."
      },
      {
        "number": "58",
        "name": "DM",
        "type": "bidirectional",
        "description": "USB data signal minus."
      },
      {
        "number": "59",
        "name": "DP",
        "type": "bidirectional",
        "description": "USB data signal plus."
      },
      {
        "number": "60",
        "name": "REF",
        "type": "input",
        "description": "Current reference input; connect via a 12K Ohm 1% resistor to GND."
      },
      {
        "number": "61",
        "name": "VCC_PD",
        "type": "power_in",
        "description": "+3.3V input for the internal PD PHY."
      },
      {
        "number": "62",
        "name": "PD1_CC2",
        "type": "bidirectional",
        "description": "Analog I/O pin for PD1 CC2."
      },
      {
        "number": "63",
        "name": "PD1_SVBUS",
        "type": "input",
        "description": "Analog input for scaled-down VBUS sensing for PD1; VBUS must be divided by 10 before this pin."
      },
      {
        "number": "64",
        "name": "PD1_VCONN",
        "type": "power_in",
        "description": "Power input for the PD1 VCONN power source; connect to 3.3V."
      },
      {
        "number": "65",
        "name": "PD1_CC1",
        "type": "bidirectional",
        "description": "Analog I/O pin for PD1 CC1."
      },
      {
        "number": "66",
        "name": "VCORE",
        "type": "power_in",
        "description": "+1.2V core supply input; connect to VREGOUT when using the internal regulator."
      },
      {
        "number": "67",
        "name": "PWREN#",
        "type": "output",
        "description": "Active-low power-enable output: 0 = normal operation, 1 = USB suspend or device not configured."
      },
      {
        "number": "68",
        "name": "EECS",
        "type": "bidirectional",
        "description": "EEPROM chip select, tri-state during device reset."
      },
      {
        "number": "69",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet text does not mention an exposed/thermal pad for the QFN-68 package (pin function or conne; Pin numbers were taken from the Table 3.1 and Table 3.2-3.6 QFN-68 columns. The pin-configuration fi; I/O types for multi-function bus pins are set to bidirectional as a general class, since direction d"
        ],
        "pages_sent": 22,
        "cost_usd": 0.3185,
        "at": "2026-10-31T01:45:48"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/cbe7e76eafc4f7cb65ae77dda16a0315.pdf",
        "pages": 51,
        "sha256": "d8534b366fa17f2d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 69,
        "described": 69,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ft2232hpq-tray.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8,
          8,
          0.87
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7eecf1c3ff4cba11026f26e261e1c97e34bcb6b0239bc5c5d39464b2f4148e9c",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ft2232hpq-tray-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8,
          8,
          0.87
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "67fb411d3f649fa9e1c6cb506427254815189206c7e0c33395cc445fd83749b4",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "FTDI",
      "Package": "QFN-68(8x8)",
      "Category": "Communication Interface Chip/UART/485/232",
      "Pins": "69"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "d8534b366fa17f2d7f5f3d1e7271cb94f897047de6404ba5a991948be9cc08b7",
      "rows": [
        {
          "name": "VCORE Operating Supply Voltage",
          "symbol": "VCORE",
          "kind": "electrical",
          "unit": "V",
          "min": 1.08,
          "typ": 1.2,
          "max": 1.32,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VCCIO Operating Supply Voltage",
          "symbol": "VCCIO",
          "kind": "electrical",
          "unit": "V",
          "min": 2.97,
          "typ": 3.3,
          "max": 3.63,
          "conditions": "Cells are 5V tolerant",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VREGIN Voltage regulator input",
          "symbol": "VREGIN",
          "kind": "electrical",
          "unit": "V",
          "min": 3,
          "typ": 3.3,
          "max": 3.6,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VREGOUT Voltage regulator output",
          "symbol": "VREGOUT",
          "kind": "electrical",
          "unit": "V",
          "min": 1.08,
          "typ": 1.2,
          "max": 1.32,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Input low switching threshold",
          "symbol": "Vil",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "LVTTL",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Input high switching threshold",
          "symbol": "Vih",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "LVTTL",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Schmitt trigger negative going threshold voltage",
          "symbol": "Vt-",
          "kind": "electrical",
          "unit": "V",
          "min": 0.8,
          "typ": 1.1,
          "max": null,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Schmitt trigger positive going threshold voltage",
          "symbol": "Vt+",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 1.6,
          "max": 2,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Input pull-up resistance",
          "symbol": "Rpu",
          "kind": "electrical",
          "unit": "KΩ",
          "min": 40,
          "typ": 75,
          "max": 190,
          "conditions": "Vin = 0",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Input pull-down resistance",
          "symbol": "Rpd",
          "kind": "electrical",
          "unit": "KΩ",
          "min": 40,
          "typ": 75,
          "max": 190,
          "conditions": "Vin =VCCIO",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current",
          "symbol": "Iin",
          "kind": "electrical",
          "unit": "μA",
          "min": 15,
          "typ": 45,
          "max": 85,
          "conditions": "Vin = 0",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Tri-state output leakage current",
          "symbol": "Ioz",
          "kind": "electrical",
          "unit": "μA",
          "min": -10,
          "typ": null,
          "max": 10,
          "conditions": "Vin = 5.5V or 0",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature",
          "symbol": "TJ",
          "kind": "thermal",
          "unit": "°C",
          "min": -40,
          "typ": 25,
          "max": 125,
          "conditions": "FT2233HP/FT2232HP",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Ambient operating temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Power applied",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VCORE supply voltage",
          "symbol": "VCORE",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 2,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VCCIO IO voltage",
          "symbol": "VCCIO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "DC input voltage USBDP and USBDM",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 3.63,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "DC input voltage high impedance bi-directional",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5.8,
          "conditions": "powered from VCCIO",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "DC input voltage all other inputs",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": null,
          "conditions": "upper limit VCCIO + 0.5 V",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "DC output current outputs",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 16,
          "conditions": "",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Regulator current",
          "symbol": "Ireg",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 22.37,
          "max": 150,
          "conditions": "VREGIN +3.3V and data transfer with 12Mbps",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VREGIN suspend supply current",
          "symbol": "Icc1s",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 132.2,
          "max": null,
          "conditions": "USB Suspend",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VCC_USB operating supply current",
          "symbol": "I_vcc_usb",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 22.36,
          "max": null,
          "conditions": "Data transfer with 12Mbps",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VCC_IO operating supply current",
          "symbol": "I_vccio",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.72,
          "max": null,
          "conditions": "Data transfer with 12Mbps",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "VCC_PD suspend supply current",
          "symbol": "I_vcc_pd",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": 23.5,
          "max": null,
          "conditions": "PD suspend",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Output voltage high",
          "symbol": "Voh",
          "kind": "electrical",
          "unit": "V",
          "min": 2.4,
          "typ": 3.14,
          "max": null,
          "conditions": "Ioh = +/-2mA, I/O Drive strength = 4mA",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Output voltage low",
          "symbol": "Vol",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.18,
          "max": 0.4,
          "conditions": "Iol = +/-2mA, I/O Drive strength = 4mA",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-ambient (FT2232HPQ)",
          "symbol": "ѲJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 23.65,
          "max": null,
          "conditions": "Preliminary data",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-case (FT2232HPQ)",
          "symbol": "ѲJC",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 9.35,
          "max": null,
          "conditions": "Preliminary data",
          "source_page": 43,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ft2232hpq-tray"
  ],
  "discovery_pitch": "FT2232HPQ-TRAY (FTDI) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ft2232hpq-tray.kicad_sym",
    "ft2232hpq-tray.kicad_mod",
    "ft2232hpq-tray.glb",
    "ft2232hpq-tray.step",
    "ft2232hpq-tray.lbr",
    "docs/hero.png",
    "docs/ft2232hpq-tray-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ft2232hpq-tray-hero.glb",
    "ft2232hpq-tray-hero.overlay.json",
    "ft2232hpq-tray-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}