component
FT200XD-T
Public Made by Adomby adom
FTDI USB ICs, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
FT200XD-T
FTDI · USB ICs · DFN-10-EP(3x3)
FT200XD-T from FTDI, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | USBDM | bidirectional | USB Data Signal Minus; datasheet lists type as INPUT. |
| 2 | RESET# | input | Active-low reset input; can be tied to 3V3OUT. |
| 3 | 3V3OUT | power_out | 3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be connected to pin 4. |
| 4 | VCC | power_in | 5 V (or 3V3) supply to the IC; if VCC is 3V3, 3V3OUT must also be driven with 3V3. |
| 5 | CBUS0 | bidirectional | Configurable CBUS I/O pin whose function is set in the device MTP memory (see CBUS Signal Options, Table 3.4). |
| 6 | SCL | input | I2C clock input; clock stretching is not supported. |
| 7 | VCCIO | power_in | 1V8 - 3V3 supply for the IO cells. |
| 8 | SDA | bidirectional | I2C bi-directional data line; the signal is open drain. |
| 9 | GND | power_in | 0V ground input. |
| 10 | USBDP | bidirectional | USB Data Signal Plus; datasheet lists type as INPUT. |
| 11 | GND | power_in | Centre pad on the package base, internally connected to GND and should be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI |
| Package | DFN-10-EP(3x3) |
| Category | Interface ICs |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Supply Voltage | VCC | 2.97 | 5 | 5.5 | V | Normal Operation | 14 |
| VCCIO Operating Supply Voltage | VCC2 | 1.62 | 3.63 | V | 14 | ||
| Operating Supply Current | Icc1 | 6.8 | 8 | 9.1 | mA | Normal Operation | 14 |
| 3.3V regulator output | 3V3 | 2.97 | 3.3 | 3.63 | V | 14 | |
| Output Voltage High (VCCIO=3.3V) | Voh | 2.97 | V | Ioh =-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 15 | ||
| Output Voltage Low (VCCIO=3.3V) | Vol | 0.4 | V | Iol = +2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 15 | ||
| Input low Switching Threshold (VCCIO=3.3V) | Vil | 0.8 | V | LVTTL | 15 | ||
| Input High Switching Threshold (VCCIO=3.3V) | Vih | 2 | V | LVTTL | 15 | ||
| Input pull-up resistance (VCCIO=3.3V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 15 |
| Input pull-down resistance (VCCIO=3.3V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 15 |
| Input Leakage Current (VCCIO=3.3V) | Iin | -10 | 10 | μA | Vin = 0 | 15 | |
| Tri-state output leakage current (VCCIO=3.3V) | Ioz | -10 | 10 | μA | Vin = 5.5V or 0 | 15 | |
| Output Voltage High (VCCIO=2.5V) | Voh | 2.25 | V | Ioh = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 16 | ||
| Output Voltage Low (VCCIO=2.5V) | Vol | 0.4 | V | Iol = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 16 | ||
| Input low Switching Threshold (VCCIO=2.5V) | Vil | 0.8 | V | LVTTL | 16 | ||
| Input High Switching Threshold (VCCIO=2.5V) | Vih | 0.8 | V | LVTTL | 16 | ||
| Input pull-up resistance (VCCIO=2.5V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 16 |
| Input pull-down resistance (VCCIO=2.5V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 16 |
| Input Leakage Current (VCCIO=2.5V) | Iin | -10 | 10 | μA | Vin = 0 | 16 | |
| Tri-state output leakage current (VCCIO=2.5V) | Ioz | -10 | 10 | μA | Vin = 5.5V or 0 | 16 | |
| Output Voltage High (VCCIO=1.8V) | Voh | 1.62 | V | Ioh = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 17 | ||
| Output Voltage Low (VCCIO=1.8V) | Vol | 0.4 | V | Iol = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 17 | ||
| Input low Switching Threshold (VCCIO=1.8V) | Vil | 0.77 | V | LVTTL | 17 | ||
| Input High Switching Threshold (VCCIO=1.8V) | Vih | 1.6 | V | LVTTL | 17 | ||
| Input pull-up resistance (VCCIO=1.8V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 17 |
| Input pull-down resistance (VCCIO=1.8V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 17 |
| Input Leakage Current (VCCIO=1.8V) | Iin | -10 | 10 | μA | Vin = 0 | 17 | |
| Tri-state output leakage current (VCCIO=1.8V) | Ioz | -10 | 10 | μA | Vin = 5.5V or 0 | 17 | |
| USB Output Voltage Low | Vol | 0.2 | V | USBDP, USBDM | 18 | ||
| USB Input low Switching Threshold | Vil | 0.8 | V | USBDP, USBDM | 18 | ||
| USB Input High Switching Threshold | Vih | 2 | V | USBDP, USBDM | 18 | ||
| Internal clock frequency of operation | 11.98 | 12 | 12.02 | MHz | Note 1: Equivalent to +/-1667ppm | 18 | |
| Internal clock period | 83.19 | 83.33 | 83.47 | ns | 18 | ||
| Internal clock duty cycle | 45 | 50 | 55 | % | 18 | ||
| MTP write cycles | 2000 | Cycles | minimum | 18 | |||
| Storage Temperature | -65 | 150 | °C | 13 | |||
| Ambient Operating Temperature (Power Applied) | -40 | 85 | °C | 13 | |||
| VCC Supply Voltage | VCC | -0.3 | 5.5 | V | 13 | ||
| VCCIO IO Voltage | VCCIO | -0.3 | 4 | V | 13 | ||
| DC Input Voltage, USBDP and USBDM | -0.5 | 3.63 | V | 13 | |||
| DC Input Voltage, High Impedance Bi-directional | -0.3 | 5.8 | V | powered from VCCIO | 13 | ||
| DC Output Current, Outputs | 22 | mA | 13 | ||||
| Operating Supply Current (USB Suspend) | Icc2 | 125 | μA | USB Suspend | 14 | ||
| MTP data retention | 10 | Years | 18 |
CAD (KiCad official)
- Symbol:
FT200XD-T - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ft200xd-t-etched.step/ft200xd-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft200xd-t.step/ft200xd-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FTDI datasheet (44 pp, sha256
7f7fae38c64134d3, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FT200XD-T
**FTDI** · USB ICs · DFN-10-EP(3x3)
FT200XD-T from FTDI, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | USBDM | bidirectional | USB Data Signal Minus; datasheet lists type as INPUT. |
| 2 | RESET# | input | Active-low reset input; can be tied to 3V3OUT. |
| 3 | 3V3OUT | power_out | 3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be connected to pin 4. |
| 4 | VCC | power_in | 5 V (or 3V3) supply to the IC; if VCC is 3V3, 3V3OUT must also be driven with 3V3. |
| 5 | CBUS0 | bidirectional | Configurable CBUS I/O pin whose function is set in the device MTP memory (see CBUS Signal Options, Table 3.4). |
| 6 | SCL | input | I2C clock input; clock stretching is not supported. |
| 7 | VCCIO | power_in | 1V8 - 3V3 supply for the IO cells. |
| 8 | SDA | bidirectional | I2C bi-directional data line; the signal is open drain. |
| 9 | GND | power_in | 0V ground input. |
| 10 | USBDP | bidirectional | USB Data Signal Plus; datasheet lists type as INPUT. |
| 11 | GND | power_in | Centre pad on the package base, internally connected to GND and should be connected to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI |
| Package | DFN-10-EP(3x3) |
| Category | Interface ICs |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Supply Voltage | VCC | 2.97 | 5 | 5.5 | V | Normal Operation | 14 |
| VCCIO Operating Supply Voltage | VCC2 | 1.62 | | 3.63 | V | | 14 |
| Operating Supply Current | Icc1 | 6.8 | 8 | 9.1 | mA | Normal Operation | 14 |
| 3.3V regulator output | 3V3 | 2.97 | 3.3 | 3.63 | V | | 14 |
| Output Voltage High (VCCIO=3.3V) | Voh | 2.97 | | | V | Ioh =-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 15 |
| Output Voltage Low (VCCIO=3.3V) | Vol | | | 0.4 | V | Iol = +2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 15 |
| Input low Switching Threshold (VCCIO=3.3V) | Vil | | | 0.8 | V | LVTTL | 15 |
| Input High Switching Threshold (VCCIO=3.3V) | Vih | 2 | | | V | LVTTL | 15 |
| Input pull-up resistance (VCCIO=3.3V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 15 |
| Input pull-down resistance (VCCIO=3.3V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 15 |
| Input Leakage Current (VCCIO=3.3V) | Iin | -10 | | 10 | μA | Vin = 0 | 15 |
| Tri-state output leakage current (VCCIO=3.3V) | Ioz | -10 | | 10 | μA | Vin = 5.5V or 0 | 15 |
| Output Voltage High (VCCIO=2.5V) | Voh | 2.25 | | | V | Ioh = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 16 |
| Output Voltage Low (VCCIO=2.5V) | Vol | | | 0.4 | V | Iol = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 16 |
| Input low Switching Threshold (VCCIO=2.5V) | Vil | | | 0.8 | V | LVTTL | 16 |
| Input High Switching Threshold (VCCIO=2.5V) | Vih | 0.8 | | | V | LVTTL | 16 |
| Input pull-up resistance (VCCIO=2.5V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 16 |
| Input pull-down resistance (VCCIO=2.5V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 16 |
| Input Leakage Current (VCCIO=2.5V) | Iin | -10 | | 10 | μA | Vin = 0 | 16 |
| Tri-state output leakage current (VCCIO=2.5V) | Ioz | -10 | | 10 | μA | Vin = 5.5V or 0 | 16 |
| Output Voltage High (VCCIO=1.8V) | Voh | 1.62 | | | V | Ioh = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 17 |
| Output Voltage Low (VCCIO=1.8V) | Vol | | | 0.4 | V | Iol = +/-2mA; I/O Drive strength = 4mA/8mA/12mA/16mA | 17 |
| Input low Switching Threshold (VCCIO=1.8V) | Vil | | | 0.77 | V | LVTTL | 17 |
| Input High Switching Threshold (VCCIO=1.8V) | Vih | 1.6 | | | V | LVTTL | 17 |
| Input pull-up resistance (VCCIO=1.8V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 17 |
| Input pull-down resistance (VCCIO=1.8V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 17 |
| Input Leakage Current (VCCIO=1.8V) | Iin | -10 | | 10 | μA | Vin = 0 | 17 |
| Tri-state output leakage current (VCCIO=1.8V) | Ioz | -10 | | 10 | μA | Vin = 5.5V or 0 | 17 |
| USB Output Voltage Low | Vol | | | 0.2 | V | USBDP, USBDM | 18 |
| USB Input low Switching Threshold | Vil | | | 0.8 | V | USBDP, USBDM | 18 |
| USB Input High Switching Threshold | Vih | 2 | | | V | USBDP, USBDM | 18 |
| Internal clock frequency of operation | | 11.98 | 12 | 12.02 | MHz | Note 1: Equivalent to +/-1667ppm | 18 |
| Internal clock period | | 83.19 | 83.33 | 83.47 | ns | | 18 |
| Internal clock duty cycle | | 45 | 50 | 55 | % | | 18 |
| MTP write cycles | | 2000 | | | Cycles | minimum | 18 |
| Storage Temperature | | -65 | | 150 | °C | | 13 |
| Ambient Operating Temperature (Power Applied) | | -40 | | 85 | °C | | 13 |
| VCC Supply Voltage | VCC | -0.3 | | 5.5 | V | | 13 |
| VCCIO IO Voltage | VCCIO | -0.3 | | 4 | V | | 13 |
| DC Input Voltage, USBDP and USBDM | | -0.5 | | 3.63 | V | | 13 |
| DC Input Voltage, High Impedance Bi-directional | | -0.3 | | 5.8 | V | powered from VCCIO | 13 |
| DC Output Current, Outputs | | | | 22 | mA | | 13 |
| Operating Supply Current (USB Suspend) | Icc2 | | 125 | | μA | USB Suspend | 14 |
| MTP data retention | | | 10 | | Years | | 18 |
## CAD (KiCad official)
- Symbol: `FT200XD-T`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `ft200xd-t-etched.step` / `ft200xd-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ft200xd-t.step` / `ft200xd-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FTDI datasheet](docs/ft200xd-t-datasheet.pdf) (44 pp, sha256 `7f7fae38c64134d3`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ft200xd-t-datasheet.pdf)