main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ft1215q: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ft1215q: viewers · Ray
ft1215q-etched.fit.json ft1215q: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ft1215q-etched.glb ft1215q: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ft1215q-etched.step ft1215q: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ft1215q.glb Publish 0.1.0 · Ray
ft1215q.kicad_mod Publish 0.1.0 · Ray
ft1215q.kicad_sym Publish 0.1.0 · Ray
ft1215q.lbr Publish 0.1.0 · Ray
ft1215q.step Publish 0.1.0 · Ray
package.json ft1215q: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ft1215q: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ft1215q · Ray

FT1215Q

Fortior Tech · Brushless DC (BLDC) Motor Driver · QFN-24(4x4)

FT1215Q from Fortior Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SREF input Analog input voltage for speed adjustment.
2 HC_INN input Hall C negative sensor input for phase-W magnetic field detection.
3 HC_INP input Hall C positive sensor input for phase-W magnetic field detection.
4 HB_INN input Hall B negative sensor input for phase-V magnetic field detection.
5 HB_INP input Hall B positive sensor input for phase-V magnetic field detection.
6 HA_INN input Hall A negative sensor input for phase-U magnetic field detection.
7 HA_INP input Hall A positive sensor input for phase-U magnetic field detection.
8 VDD5 power_out LDO digital power output providing 5V DC for digital signals.
9 LA input Lead angle select analog input for 0-63 degree phase shift.
10 SMIN input Minimum speed setting input to prevent discontinuous motor rotation.
11 START input Motor start input; high to start, low for free run; internal pull-up.
12 TMODE input Test signal input, connect to GND.
13 VCC power_in Main power supply input, 4.5-28V recommended operating range.
14 MOT_W output Motor phase W output.
15 MOT_V output Motor phase V output.
16 MOT_U output Motor phase U output.
17 RNF output Output current detection pin for current limiting circuit.
18 VSS power_in Signal and power ground.
19 BRAKE input Brake signal input; low activates brake; internal pull-up.
20 FG output Open drain frequency generator output for speed information.
21 RD output Open drain motor rotation detection output.
22 RPI input Soft-start PWM duty cycle setting input.
23 F/R input Motor rotation direction control input.
24 PWM input PWM speed control input with internal pull-up.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package QFN-24(4x4)
Category Motor Driver ICs
Pins 25

CAD (KiCad official)

  • Symbol: FT1215Q
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: ft1215q-etched.step / ft1215q-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft1215q.step / ft1215q.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (14 pp, sha256 887afa9bf8b90847, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF