component
FT1215Q
Public Made by Adomby adom
Fortior Tech Brushless DC (BLDC) Motor Driver, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# FT1215Q++**Fortior Tech** · Brushless DC (BLDC) Motor Driver · QFN-24(4x4)++FT1215Q from Fortior Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SREF | input | Analog input voltage for speed adjustment. |+| 2 | HC_INN | input | Hall C negative sensor input for phase-W magnetic field detection. |+| 3 | HC_INP | input | Hall C positive sensor input for phase-W magnetic field detection. |+| 4 | HB_INN | input | Hall B negative sensor input for phase-V magnetic field detection. |+| 5 | HB_INP | input | Hall B positive sensor input for phase-V magnetic field detection. |+| 6 | HA_INN | input | Hall A negative sensor input for phase-U magnetic field detection. |+| 7 | HA_INP | input | Hall A positive sensor input for phase-U magnetic field detection. |+| 8 | VDD5 | power_out | LDO digital power output providing 5V DC for digital signals. |+| 9 | LA | input | Lead angle select analog input for 0-63 degree phase shift. |+| 10 | SMIN | input | Minimum speed setting input to prevent discontinuous motor rotation. |+| 11 | START | input | Motor start input; high to start, low for free run; internal pull-up. |+| 12 | TMODE | input | Test signal input, connect to GND. |+| 13 | VCC | power_in | Main power supply input, 4.5-28V recommended operating range. |+| 14 | MOT_W | output | Motor phase W output. |+| 15 | MOT_V | output | Motor phase V output. |+| 16 | MOT_U | output | Motor phase U output. |+| 17 | RNF | output | Output current detection pin for current limiting circuit. |+| 18 | VSS | power_in | Signal and power ground. |+| 19 | BRAKE | input | Brake signal input; low activates brake; internal pull-up. |+| 20 | FG | output | Open drain frequency generator output for speed information. |+| 21 | RD | output | Open drain motor rotation detection output. |+| 22 | RPI | input | Soft-start PWM duty cycle setting input. |+| 23 | F/R | input | Motor rotation direction control input. |+| 24 | PWM | input | PWM speed control input with internal pull-up. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Fortior Tech |+| Package | QFN-24(4x4) |+| Category | Motor Driver ICs |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `FT1215Q`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24(4x4) (KiCad packages3D, STEP)+- 3D model files: `ft1215q-etched.step` / `ft1215q-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ft1215q.step` / `ft1215q.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Fortior Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835078491799552) (14 pp, sha256 `887afa9bf8b90847`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ft1215q-datasheet.pdf)
page.jsonadded+245@@ -0,0 +1,245 @@+{+ "slug": "ft1215q",+ "version": "0.1.0",+ "type": "component",+ "description": "Fortior Tech Brushless DC (BLDC) Motor Driver, QFN-24(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "ft1215q",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ft1215q.kicad_sym",+ "ft1215q.kicad_mod",+ "ft1215q.glb",+ "ft1215q.step",+ "ft1215q.lbr",+ "docs/hero.png",+ "docs/ft1215q-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "FT1215Q",+ "manufacturer": "Fortior Tech",+ "package": "QFN-24(4x4)",+ "pin_count": 25,+ "category": "Motor Driver ICs",+ "subcategory": "Brushless DC (BLDC) Motor Driver",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835078491799552",+ "parts": {+ "symbol": "ft1215q.kicad_sym",+ "footprint": "ft1215q.kicad_mod",+ "model_3d": "ft1215q-etched.glb",+ "model_3d_plain": "ft1215q.glb",+ "model_3d_step": "ft1215q-etched.step",+ "model_3d_step_plain": "ft1215q.step",+ "lbr": "ft1215q.lbr"+ },+ "distributor_links": {+ "lcsc": "C5126650"+ },+ "pins": [+ {+ "number": "1",+ "name": "SREF",+ "type": "input",+ "description": "Analog input voltage for speed adjustment."+ },+ {+ "number": "2",+ "name": "HC_INN",+ "type": "input",+ "description": "Hall C negative sensor input for phase-W magnetic field detection."+ },+ {+ "number": "3",+ "name": "HC_INP",+ "type": "input",+ "description": "Hall C positive sensor input for phase-W magnetic field detection."+ },+ {+ "number": "4",+ "name": "HB_INN",+ "type": "input",+ "description": "Hall B negative sensor input for phase-V magnetic field detection."+ },+ {+ "number": "5",+ "name": "HB_INP",+ "type": "input",+ "description": "Hall B positive sensor input for phase-V magnetic field detection."+ },+ {+ "number": "6",+ "name": "HA_INN",+ "type": "input",+ "description": "Hall A negative sensor input for phase-U magnetic field detection."+ },+ {+ "number": "7",+ "name": "HA_INP",+ "type": "input",+ "description": "Hall A positive sensor input for phase-U magnetic field detection."+ },+ {+ "number": "8",+ "name": "VDD5",+ "type": "power_out",+ "description": "LDO digital power output providing 5V DC for digital signals."+ },+ {+ "number": "9",+ "name": "LA",+ "type": "input",+ "description": "Lead angle select analog input for 0-63 degree phase shift."+ },+ {+ "number": "10",+ "name": "SMIN",+ "type": "input",+ "description": "Minimum speed setting input to prevent discontinuous motor rotation."+ },+ {+ "number": "11",+ "name": "START",+ "type": "input",+ "description": "Motor start input; high to start, low for free run; internal pull-up."+ },+ {+ "number": "12",+ "name": "TMODE",+ "type": "input",+ "description": "Test signal input, connect to GND."+ },+ {+ "number": "13",+ "name": "VCC",+ "type": "power_in",+ "description": "Main power supply input, 4.5-28V recommended operating range."+ },+ {+ "number": "14",+ "name": "MOT_W",+ "type": "output",+ "description": "Motor phase W output."+ },+ {+ "number": "15",+ "name": "MOT_V",+ "type": "output",+ "description": "Motor phase V output."+ },+ {+ "number": "16",+ "name": "MOT_U",+ "type": "output",+ "description": "Motor phase U output."+ },+ {+ "number": "17",+ "name": "RNF",+ "type": "output",+ "description": "Output current detection pin for current limiting circuit."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Signal and power ground."+ },+ {+ "number": "19",+ "name": "BRAKE",+ "type": "input",+ "description": "Brake signal input; low activates brake; internal pull-up."+ },+ {+ "number": "20",+ "name": "FG",+ "type": "output",+ "description": "Open drain frequency generator output for speed information."+ },+ {+ "number": "21",+ "name": "RD",+ "type": "output",+ "description": "Open drain motor rotation detection output."+ },+ {+ "number": "22",+ "name": "RPI",+ "type": "input",+ "description": "Soft-start PWM duty cycle setting input."+ },+ {+ "number": "23",+ "name": "F/R",+ "type": "input",+ "description": "Motor rotation direction control input."+ },+ {+ "number": "24",+ "name": "PWM",+ "type": "input",+ "description": "PWM speed control input with internal pull-up."+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 14,+ "cost_usd": 0.1899,+ "at": "2026-09-18T05:40:22"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835078491799552",+ "pages": 14,+ "sha256": "887afa9bf8b90847",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}