main
Ray Publish 0.1.0 fa21e79
{
  "slug": "ft1128q",
  "version": "0.1.0",
  "type": "component",
  "description": "Fortior Tech Motor Driver ICs, QFN-28(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ft1128q",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ft1128q.kicad_sym",
    "ft1128q.kicad_mod",
    "ft1128q.glb",
    "ft1128q.step",
    "ft1128q.lbr",
    "docs/hero.png",
    "docs/ft1128q-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ft1128q-hero.glb",
    "ft1128q-hero.overlay.json",
    "ft1128q-etched.glb"
  ],
  "component": {
    "mpn": "FT1128Q",
    "manufacturer": "Fortior Tech",
    "package": "QFN-28(5x5)",
    "pin_count": 29,
    "category": "Power Supply Chip",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6cc44b9dbc21850ab09777daf21a46b0.pdf",
    "parts": {
      "symbol": "ft1128q.kicad_sym",
      "footprint": "ft1128q.kicad_mod",
      "model_3d": "ft1128q-hero.glb",
      "model_3d_plain": "ft1128q-etched.glb",
      "model_3d_step": "ft1128q-etched.step",
      "model_3d_step_plain": "ft1128q.step",
      "lbr": "ft1128q.lbr"
    },
    "distributor_links": {
      "lcsc": "C5126655"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T15:35:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, with recommended Vcc of 3.7 V to 28 V (12 V typical) and absolute maximum of 30.0 V."
      },
      {
        "number": "2",
        "name": "VSS",
        "type": "power_in",
        "description": "Signal and power ground."
      },
      {
        "number": "3",
        "name": "VDD5",
        "type": "power_out",
        "description": "Digital power output from the LDO, regulated at 4.9 V to 5.1 V for digital signals with output current up to 10 mA."
      },
      {
        "number": "4",
        "name": "RPI",
        "type": "input",
        "description": "Soft start duty setting input."
      },
      {
        "number": "5",
        "name": "VDC_DETE",
        "type": "input",
        "description": "Power supply over voltage and under voltage detection input; all MOS are turned off above 3.9 V or below 1.2 V."
      },
      {
        "number": "6",
        "name": "BRAKE",
        "type": "input",
        "description": "Brake signal input with internal pull-up, where a low level brakes the motor."
      },
      {
        "number": "7",
        "name": "SPEED/PWM",
        "type": "input",
        "description": "Speed control input for digital PWM or analog voltage, with high-level input 2.7 V to 5.3 V and low-level input 0 V to 0.9 V."
      },
      {
        "number": "8",
        "name": "FR",
        "type": "input",
        "description": "Motor rotation direction input."
      },
      {
        "number": "9",
        "name": "ILIMIT",
        "type": "input",
        "description": "Current limit analog input."
      },
      {
        "number": "10",
        "name": "RD",
        "type": "output",
        "description": "Open drain motor rotate detection output, with withstand voltage of 5.5 V max and output current of 10 mA max."
      },
      {
        "number": "11",
        "name": "FG",
        "type": "output",
        "description": "Open drain frequency generator speed signal output that requires an external pull-up resistor when used."
      },
      {
        "number": "12",
        "name": "FG2",
        "type": "output",
        "description": "Open drain frequency generator output carrying the Hall B signal."
      },
      {
        "number": "13",
        "name": "TDA",
        "type": "input",
        "description": "Thermal detection input; external thermal protection is triggered when TDA is below 2.12 V."
      },
      {
        "number": "14",
        "name": "HC_INN",
        "type": "input",
        "description": "Hall C negative sensor input for phase W magnetic field detection, with zero-peak sensitivity of 10 mV to 20 mV."
      },
      {
        "number": "15",
        "name": "HC_INP",
        "type": "input",
        "description": "Hall C positive sensor input for phase W magnetic field detection, with zero-peak sensitivity of 10 mV to 20 mV."
      },
      {
        "number": "16",
        "name": "HB_INN",
        "type": "input",
        "description": "Hall B negative sensor input for phase V magnetic field detection, with zero-peak sensitivity of 10 mV to 20 mV."
      },
      {
        "number": "17",
        "name": "HB_INP",
        "type": "input",
        "description": "Hall B positive sensor input for phase V magnetic field detection, with zero-peak sensitivity of 10 mV to 20 mV."
      },
      {
        "number": "18",
        "name": "HA_INN",
        "type": "input",
        "description": "Hall A negative sensor input for phase U magnetic field detection, with zero-peak sensitivity of 10 mV to 20 mV."
      },
      {
        "number": "19",
        "name": "HA_INP",
        "type": "input",
        "description": "Hall A positive sensor input for phase U magnetic field detection, with zero-peak sensitivity of 10 mV to 20 mV."
      },
      {
        "number": "20",
        "name": "ISENSE",
        "type": "input",
        "description": "Current limit and lead angle analog input, with analog input range of 0 V to 5.3 V."
      },
      {
        "number": "21",
        "name": "ITRIP",
        "type": "input",
        "description": "Current limit and over current protection input, with over current threshold typically 0.5 V."
      },
      {
        "number": "22",
        "name": "WL",
        "type": "output",
        "description": "Low side phase W NMOS driver output."
      },
      {
        "number": "23",
        "name": "VL",
        "type": "output",
        "description": "Low side phase V NMOS driver output."
      },
      {
        "number": "24",
        "name": "UL",
        "type": "output",
        "description": "Low side phase U NMOS driver output."
      },
      {
        "number": "25",
        "name": "WH",
        "type": "output",
        "description": "High side phase W PMOS driver output."
      },
      {
        "number": "26",
        "name": "VH",
        "type": "output",
        "description": "High side phase V PMOS driver output."
      },
      {
        "number": "27",
        "name": "UH",
        "type": "output",
        "description": "High side phase U PMOS driver output."
      },
      {
        "number": "28",
        "name": "VREG10",
        "type": "output",
        "description": "LDO output regulated at 9.5 V to 10.5 V."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names were taken from the QFN28 pin table on page 3. The top-view diagram on that pa",
          "exposed pad 29 added from the footprint"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0623,
        "at": "2026-11-05T15:34:52"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/6cc44b9dbc21850ab09777daf21a46b0.pdf",
        "pages": 16,
        "sha256": "22c1f369fb4a79bf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ft1128q.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ft1128q-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b5582a67b2ae7696c7340efada47e05401822ed255389818532850e8b6c5de89",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}