main
Ray Publish 0.1.0 de6d172

FSW6860YQFN48G

Full-Way(四方杰芯) · IC · QFN-48L(6x6)

FSW6860YQFN48G from Full-Way(四方杰芯), in a QFN-48L(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected; leave floating.
2 S11 input Select pin for Port B01/B11 path: L selects Port A1 to B01, H selects Port A1 to B11 (active only when _EN is low).
3 VCC2 power_in Positive supply for the normal-speed channel; the datasheet gives VCC1,VCC2 absolute maximum of -0.3 V to 6.5 V and tests normal-speed DC levels at 3.3 V.
4 B11 bidirectional Analog/digital signal Port 1, normally open contact of the normal-speed SPDT switch.
5 COMAN bidirectional Negative differential signal 1 for the USB 3.1 COM port.
6 COMAP bidirectional Positive differential signal 1 for the USB 3.1 COM port.
7 COMBN bidirectional Negative differential signal 2 for the USB 3.1 COM port.
8 COMBP bidirectional Positive differential signal 2 for the USB 3.1 COM port.
9 COMCN bidirectional Negative differential signal 3 for the USB 3.1 COM port.
10 COMCP bidirectional Positive differential signal 3 for the USB 3.1 COM port.
11 COMDN bidirectional Negative differential signal 4 for the USB 3.1 COM port.
12 COMDP bidirectional Positive differential signal 4 for the USB 3.1 COM port.
13 GND2 power_in Power ground.
14 COMEN bidirectional Negative differential signal 5 for the USB 3.1 COM port.
15 COMEP bidirectional Positive differential signal 5 for the USB 3.1 COM port.
16 SEL input Select pin for the high-speed mux: L connects Port COM to Port A, H connects Port COM to Port B (internal pull-down 2 MΩ).
17 _EN input Active-low enable for the high-speed channel; high disables the switch into shutdown (internal pull-up 2 MΩ), with logic thresholds VIH 1.6 V min and VIL 0.4 V max at VCC 1.8-4.5 V.
18 DA4P bidirectional Positive differential signal 4 for the USB 3.1 Port A.
19 DA4N bidirectional Negative differential signal 4 for the USB 3.1 Port A.
20 DA2P bidirectional Positive differential signal 2 for the USB 3.1 Port A.
21 DA2N bidirectional Negative differential signal 2 for the USB 3.1 Port A.
22 DB3P bidirectional Positive differential signal 3 for the USB 3.1 Port B.
23 DB3N bidirectional Negative differential signal 3 for the USB 3.1 Port B.
24 GND3 power_in Power ground.
25 DB4P bidirectional Positive differential signal 4 for the USB 3.1 Port B.
26 DB4N bidirectional Negative differential signal 4 for the USB 3.1 Port B.
27 DA3P bidirectional Positive differential signal 3 for the USB 3.1 Port A.
28 DA3N bidirectional Negative differential signal 3 for the USB 3.1 Port A.
29 DB2P bidirectional Positive differential signal 2 for the USB 3.1 Port B.
30 DB2N bidirectional Negative differential signal 2 for the USB 3.1 Port B.
31 DB1P bidirectional Positive differential signal 1 for the USB 3.1 Port B.
32 DB1N bidirectional Negative differential signal 1 for the USB 3.1 Port B.
33 DB0P bidirectional Positive differential signal 0 for the USB 3.1 Port B.
34 DB0N bidirectional Negative differential signal 0 for the USB 3.1 Port B.
35 VCC3 power_in Positive supply for the high-speed channel; absolute maximum is -0.5 V to +5.5 V and the high-speed electrical characteristics are specified at VCC = 3 V.
36 GND4 power_in Power ground.
37 NC unconnected Not connected; leave floating.
38 DA1P bidirectional Positive differential signal 1 for the USB 3.1 Port A.
39 DA1N bidirectional Negative differential signal 1 for the USB 3.1 Port A.
40 DA0P bidirectional Positive differential signal 0 for the USB 3.1 Port A.
41 DA0N bidirectional Negative differential signal 0 for the USB 3.1 Port A.
42 B02 bidirectional Analog/digital signal Port 2, normally closed contact of the normal-speed SPDT switch.
43 A2 bidirectional Common signal Port 2 of the normal-speed SPDT switch.
44 B12 bidirectional Analog/digital signal Port 2, normally open contact of the normal-speed SPDT switch.
45 VCC2 power_in Positive supply for the normal-speed channel; the datasheet gives VCC1,VCC2 absolute maximum of -0.3 V to 6.5 V.
46 S12 input Select pin for Port B02/B12: L selects Port A2 to B02, H selects Port A2 to B12 (active only when _OE is low).
47 B01 bidirectional Analog/digital signal Port 1, normally closed contact of the normal-speed SPDT switch.
48 A1 bidirectional Common signal Port 1 of the normal-speed SPDT switch.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Full-Way(四方杰芯)
Package QFN-48L(6x6)
Category
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -55 150 °C 5
Junction Temperature 125 °C 5
Supply Voltage to Ground Potential (High Speed Channel) VCC3 -0.5 5.5 V 5
Super Speed Data Channel TX / RX -0.5 3.8 V 5
DC Input Voltage -0.5 V Upper limit printed as VCC3 5
DC Output Current 50 mA 5
Power Dissipation 300 mW 6
Supply Voltage (Normal Speed Channel) VCC1,VCC2 -0.3 6.5 V 6
Control Input Voltage -0.3 6.5 V 6
Continuous Current Through A1, B01, B11 -100 100 mA 6
Continuous Current Through A2, B02, B12 -100 100 mA 6
Peak Current Through A1, B01, B11 -200 200 mA pulsed at 1ms 50% duty cycle 6
Thermal resistance 350 °C/W 6
Input logic high (High Speed Channel) VIH 1.6 V VCC=1.8~4.5V 6
Input logic low (High Speed Channel) VIL 0.4 V VCC=1.8~4.5V 6
VCC Quiescent Current IQ 28 uA SEL=0 or VCC, _EN=0 6
Power-down Current IPO 1 uA SEL=0 or VCC, _EN=VCC 6
Enable Time EN to Output tEN 80 150 uS RL=50Ω CL=0pF VIS= 0.6V 6
Disable Time EN to Output tDIS 40 250 nS RL=50Ω CL=0pF VIS= 0.6V 6
Turn-On Time SEL to Output tON 400 1200 nS RL=50Ω CL=0pF VIS= 0.6V 6
Turn-Off Time SEL to Output tOFF 130 800 nS RL=50Ω CL=0pF VIS= 0.6V 6
Break-Before-Make Time tBBM 250 500 nS RL=50Ω CL=0pF VIS= 0.6V 6
Input logic high level (Normal Speed Channel) VIH 1.6 V VCC=3.3~5.5V 7
Input logic high level (Normal Speed Channel) VIH 1.4 V VCC=1.5~3.3V 7
Input logic low level (Normal Speed Channel) VIL 0.6 V VCC=3.3~5.5V 7
Input logic low level (Normal Speed Channel) VIL 0.4 V VCC=1.5~3.3V 7
Supply quiescent current ICC 2 uA IA=0, VSEL =0 or VSEL =VCC 7
Increase in ICC per input ICCT 2 uA IA=0, VCC=4.5V, VSEL>1.8 or VSEL<0.5 7
Off state leakage from A1 to B01 (or B11) IA -2 2 uA VA = 5.5V, VB01(or B11) = 0V 7
Off state leakage from A2 to B02 (or B12) IA -2 2 uA VA = 5.5V, VB02(or B12) = 0V 7
On-Resistance (range 0 to 0.5V) RON1 3 3.5 Ω VA=0 ~ 0.5V, IA=30mA 7
On-Resistance (range 0.5 to 2.0V) RON2 3.6 3.9 Ω VA=0.5 ~ 2.0V, IA=30mA 7
On-Resistance (range 2.0 to 4.0V) RON3 2.5 3.5 Ω VA=2.0 ~ 4.0V, IA=30mA 7
On-Resistance (range 4.0 to 5.5V) RON4 1.5 1.8 Ω VA=4.0 ~ 5.5V, IA=30mA 7
On-Resistance Matching Between Channels Δ RON 0.1 0.2 Ω VA=0~5.5V, IA=30mA 7
On-Resistance for TX/RX RON_HS 6.5 Ω VIS= 1.5V ION=8mA 6
RON Matching Between Channels (High Speed) RMATCH 0.1 Ω VIS= 0 to 1.2V ION=8mA 6
EN Internal pull-up resistor RUP 2 MΩ 6
SEL Internal pull-down resistor RDN 2 MΩ 6
Propagation Delay tPD 0.25 nS RL=50Ω CL=0pF VIS= 0.6V 6
Off Isolation Off -39 dB RL = 50Ω f = 5GHz VIS= 0.2VPP, See Fig.2 6
Crosstalk XTALK -41 dB RL = 50Ω f = 5GHz VIS= 0.2VPP, See Fig.1 6
-3dB Bandwidth (High Speed) BW-3dB 7.5 GHz RL=50Ω CL=0pF Signal 0dBm 6
Switch On Capacitance CON 1.5 pF VBias = 0.2V, f = 1.5GHz 7
Switch Off Capacitance COFF 1 pF VBias = 0.2V, f = 1.5GHz 7
Turn-On Time (Normal Speed) TON 200 nS VA=1.5V, CL=35pF, RL=50Ω 7
Turn-Off Time (Normal Speed) TOFF 200 nS VA=1.5V, CL=35pF, RL=50Ω 7
Break-Before-Make time (Normal Speed) TBBM 500 nS VA=1.5V, CL=35pF, RL=50Ω 7
-3dB Bandwidth (Normal Speed) BW 600 MHZ RL=50Ω, CL=0pF 7
Off isolation OIRR -81 dB F=1KHz, RL=50Ω 7
Off isolation OIRR -80 dB F=10KHz, RL=50Ω 7
Crosstalk (Normal Speed) Xtalk -83 dB F=1KHz, RL=50Ω 7
Crosstalk (Normal Speed) Xtalk -82 dB F=10KHz, RL=50Ω 7
Total Harmonic Distortion THD -80 dB F=20Hz to 20KHz, VA=600mVp-p @RL=32Ω 7
Off capacitance (Normal Speed) COFF 5 pF F=100KHz, VCC=3.3 7
On capacitance (Normal Speed) CON 7 pF F=100KHz, VCC=3.3 7
Specified Temperature range -40 85 °C Ordering information, FSW6860YQFN48G/TR 2

CAD (KiCad official)

  • Symbol: FSW6860YQFN48G
  • Footprint: Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.4x4.4mm
  • 3D model: QFN-48L(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: fsw6860yqfn48g-etched.step / fsw6860yqfn48g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fsw6860yqfn48g.step / fsw6860yqfn48g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Full-Way(四方杰芯) datasheet (11 pp, sha256 76f38ff80d44c134, retrieved 2026-11-09, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF