# FRM252WFR130TK

**FOJAN** · Current Sense Resistors / Shunt Resistors · 2512

FRM252WFR130TK from FOJAN, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | FOJAN |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (part-number code F) |  | -1 |  | 1 | % | Tolerance code F = ±1% per part-numbering table | 2 |
| Temperature coefficient of resistance (T.C.R.) | TCR | -50 |  | 50 | PPM/℃ |  | 5 |
| Rated power | P |  |  | 2 | W | at P70 | 5 |
| Rated current |  |  |  | 63 | A |  | 5 |
| Max overload current |  |  |  | 141 | A |  | 5 |
| Operating temperature range |  | -55 |  | 170 | °C |  | 5 |
| ΔR limit after high temperature exposure (storage) | ΔR | -1 |  | 1 | % | T=170℃, 1000 hrs, measured 24 hrs after test | 6 |
| ΔR limit after low temperature exposure (storage) | ΔR | -0.5 |  | 0.5 | % | T=-55℃, 1000 hours, measured 24 hrs after test | 6 |
| ΔR limit after temperature cycling | ΔR | -0.5 |  | 0.5 | % | 1000 cycles (-55℃ to 125℃) | 6 |
| ΔR limit after short time overload | ΔR | -0.5 |  | 0.5 | % | 5 x rated power for 5 s | 6 |
| ΔR limit after moisture resistance | ΔR | -1 |  | 1 | % | 24 hours per cycle, 10 cycles | 6 |
| ΔR limit after biased humidity | ΔR | -0.5 |  | 0.5 | % | 10% rated power, 85℃, RH 85%, 1000 hrs | 6 |
| ΔR limit after load life | ΔR | -1 |  | 1 | % | 1000 h at +70 °C, 1.5 h ON, 0.5 h OFF | 7 |
| ΔR limit after resistance to soldering heat | ΔR | -0.5 |  | 0.5 | % | 260±5℃ solder, 10±1 sec dwell | 7 |
| ΔR limit after mechanical shock | ΔR | -0.5 |  | 0.5 | % | 100g's, 6ms half sine | 7 |
| ΔR limit after vibration | ΔR | -0.5 |  | 0.5 | % | 5g's, 10-2000Hz, 20 min, 12 cycles per axis | 7 |
| ΔR limit after board flex | ΔR | -0.5 |  | 0.5 | % | Min 2mm deflection, 60 sec | 7 |
| ΔR limit after thermal shock | ΔR | -1 |  | 1 | % | -55°C/+155°C, 1000 cycles | 7 |
| ΔR limit after ESD test | ΔR | -1 |  | 1 | % | Direct contact ±6kV; air discharge +12kV, +16kV, +25kV | 7 |

## CAD (KiCad official)

- Symbol: `FRM252WFR130TK`
- Footprint: `Resistor_SMD:R_2512_6332Metric`
- 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files: `frm252wfr130tk-etched.step` / `frm252wfr130tk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `frm252wfr130tk.step` / `frm252wfr130tk.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [FOJAN datasheet](docs/frm252wfr130tk-datasheet.pdf) (12 pp, sha256 `13a1c74e6b23cc10`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/frm252wfr130tk-datasheet.pdf)