component
FPB322520D-3R3MT0
Public Made by Adomby adom
cjiang Changjiang Microelectronics Tech Power Inductors, 1210. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
9a35b87
FPB322520D-3R3MT0
cjiang Changjiang Microelectronics Tech · Power Inductors · 1210
FPB322520D-3R3MT0 from cjiang Changjiang Microelectronics Tech, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One terminal of the 3.3 uH ±20% inductor (Rdc 65 mΩ max, Isat 4.0 A max, Itemp 2.3 A max, 20 V DC withstand); the part is non-polarised so the terminals are interchangeable. |
| 2 | 2 | passive | Other terminal of the 3.3 uH ±20% inductor (Rdc 65 mΩ max, Isat 4.0 A max, Itemp 2.3 A max, 20 V DC withstand); the part is non-polarised so the terminals are interchangeable. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | cjiang Changjiang Microelectronics Tech |
| Package | 1210 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (suffix M) | -20 | 20 | % | Part suffix M = ±20% | 3 | ||
| Inductance | L | 3.3 | uH | Test frequency 1 MHz, OSC level 0.5 V | 3 | ||
| DC resistance | Rdc | 52 | 65 | mΩ | 3 | ||
| Saturation current (Isat) | Isat | 4.5 | 4 | A | DC current at which inductance decreases approximately 30% from initial value | 3 | |
| Temperature rise current (Itemp) | Itemp | 2.7 | 2.3 | A | DC current at which temperature rises approximately ΔT=40℃; reference value | 3 | |
| Withstand DC voltage | 20 | V | 3 | ||||
| Operating temperature range | -40 | 125 | ℃ | Includes self-temperature rise | 7 | ||
| Part temperature (ambient + temp rise) | 125 | ℃ | Worst case operating conditions | 7 | |||
| Inductance temperature coefficient | 1000 | ppm/℃ | Temperature drift measured from -40℃ to 125℃ | 6 | |||
| Solder coverage of immersed electrode | 90 | % | New solder, minimum coverage of surface immersed | 6 | |||
| Inductance change after adhesive test | ΔL/L | -10 | 10 | % | Test time 60±5 s, measured after removing pressure, change from initial value | 6 | |
| Inductance change after bending test | ΔL/L | -10 | 10 | % | Bent depth 2 mm, PCB 40×100 mm, 1.0 mm thick, 30 s; change from initial value | 6 | |
| Inductance change after vibration test | ΔL/L | -10 | 10 | % | Sweep 10-55 Hz, amplitude 1.5 mm, 2 h in each of 3 axes; change from initial value | 6 | |
| Inductance change after mechanical shock test | ΔL/L | -10 | 10 | % | Peak acceleration 1962 m/s², pulse 6 ms, 3 times in each of 3 axes; change from initial value | 6 | |
| Inductance change after drop test | ΔL/L | -10 | 10 | % | Dropped from 100 cm onto rigid wood, 3 times in each of 3 axes; change from initial value | 6 | |
| Inductance change after resistance to solder heat | ΔL/L | -10 | 10 | % | Reflow, peak 255(+5/-0)℃ (230℃ min, 30±10 s), 2 times; change from initial value | 6 | |
| Inductance change after low temperature test | ΔL/L | -10 | 10 | % | Temp -40±3℃, load 500±12 h; change from initial value | 7 | |
| Inductance change after dry heat test | ΔL/L | -10 | 10 | % | Temp +85±2℃, load 500±12 h; change from initial value | 7 | |
| Inductance change after humidity test | ΔL/L | -10 | 10 | % | Temp +40±2℃, humidity 90-95% RH, load 500±12 h; change from initial value | 7 | |
| Inductance change after thermal shock test | ΔL/L | -10 | 10 | % | -40±3℃ 30±3 min, room temp within 3 min, +125±2℃ 30±3 min, 100±12 cycles; change from initial value | 7 |
CAD (KiCad official)
- Symbol:
FPB322520D-3R3MT0 - Footprint:
Inductor_SMD:L_1210_3225Metric - 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files:
fpb322520d-3r3mt0-etched.step/fpb322520d-3r3mt0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fpb322520d-3r3mt0.step/fpb322520d-3r3mt0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: cjiang Changjiang Microelectronics Tech datasheet (8 pp, sha256
c900ccd2d75d6426, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FPB322520D-3R3MT0
**cjiang Changjiang Microelectronics Tech** · Power Inductors · 1210
FPB322520D-3R3MT0 from cjiang Changjiang Microelectronics Tech, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One terminal of the 3.3 uH ±20% inductor (Rdc 65 mΩ max, Isat 4.0 A max, Itemp 2.3 A max, 20 V DC withstand); the part is non-polarised so the terminals are interchangeable. |
| 2 | 2 | passive | Other terminal of the 3.3 uH ±20% inductor (Rdc 65 mΩ max, Isat 4.0 A max, Itemp 2.3 A max, 20 V DC withstand); the part is non-polarised so the terminals are interchangeable. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | cjiang Changjiang Microelectronics Tech |
| Package | 1210 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (suffix M) | | -20 | | 20 | % | Part suffix M = ±20% | 3 |
| Inductance | L | | 3.3 | | uH | Test frequency 1 MHz, OSC level 0.5 V | 3 |
| DC resistance | Rdc | | 52 | 65 | mΩ | | 3 |
| Saturation current (Isat) | Isat | | 4.5 | 4 | A | DC current at which inductance decreases approximately 30% from initial value | 3 |
| Temperature rise current (Itemp) | Itemp | | 2.7 | 2.3 | A | DC current at which temperature rises approximately ΔT=40℃; reference value | 3 |
| Withstand DC voltage | | | | 20 | V | | 3 |
| Operating temperature range | | -40 | | 125 | ℃ | Includes self-temperature rise | 7 |
| Part temperature (ambient + temp rise) | | | | 125 | ℃ | Worst case operating conditions | 7 |
| Inductance temperature coefficient | | | | 1000 | ppm/℃ | Temperature drift measured from -40℃ to 125℃ | 6 |
| Solder coverage of immersed electrode | | 90 | | | % | New solder, minimum coverage of surface immersed | 6 |
| Inductance change after adhesive test | ΔL/L | -10 | | 10 | % | Test time 60±5 s, measured after removing pressure, change from initial value | 6 |
| Inductance change after bending test | ΔL/L | -10 | | 10 | % | Bent depth 2 mm, PCB 40×100 mm, 1.0 mm thick, 30 s; change from initial value | 6 |
| Inductance change after vibration test | ΔL/L | -10 | | 10 | % | Sweep 10-55 Hz, amplitude 1.5 mm, 2 h in each of 3 axes; change from initial value | 6 |
| Inductance change after mechanical shock test | ΔL/L | -10 | | 10 | % | Peak acceleration 1962 m/s², pulse 6 ms, 3 times in each of 3 axes; change from initial value | 6 |
| Inductance change after drop test | ΔL/L | -10 | | 10 | % | Dropped from 100 cm onto rigid wood, 3 times in each of 3 axes; change from initial value | 6 |
| Inductance change after resistance to solder heat | ΔL/L | -10 | | 10 | % | Reflow, peak 255(+5/-0)℃ (230℃ min, 30±10 s), 2 times; change from initial value | 6 |
| Inductance change after low temperature test | ΔL/L | -10 | | 10 | % | Temp -40±3℃, load 500±12 h; change from initial value | 7 |
| Inductance change after dry heat test | ΔL/L | -10 | | 10 | % | Temp +85±2℃, load 500±12 h; change from initial value | 7 |
| Inductance change after humidity test | ΔL/L | -10 | | 10 | % | Temp +40±2℃, humidity 90-95% RH, load 500±12 h; change from initial value | 7 |
| Inductance change after thermal shock test | ΔL/L | -10 | | 10 | % | -40±3℃ 30±3 min, room temp within 3 min, +125±2℃ 30±3 min, 100±12 cycles; change from initial value | 7 |
## CAD (KiCad official)
- Symbol: `FPB322520D-3R3MT0`
- Footprint: `Inductor_SMD:L_1210_3225Metric`
- 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files: `fpb322520d-3r3mt0-etched.step` / `fpb322520d-3r3mt0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fpb322520d-3r3mt0.step` / `fpb322520d-3r3mt0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [cjiang Changjiang Microelectronics Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603363587494854656) (8 pp, sha256 `c900ccd2d75d6426`, retrieved 2026-11-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fpb322520d-3r3mt0-datasheet.pdf)