FP8208AXR-G1

{
  "slug": "fp8208axr-g1",
  "version": "0.1.0",
  "type": "component",
  "description": "Advanced Analog Technology Battery Management, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "fp8208axr-g1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "fp8208axr-g1.kicad_sym",
    "fp8208axr-g1.kicad_mod",
    "fp8208axr-g1.glb",
    "fp8208axr-g1.step",
    "fp8208axr-g1.lbr",
    "docs/hero.png",
    "docs/fp8208axr-g1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "fp8208axr-g1-hero.glb",
    "fp8208axr-g1-hero.overlay.json",
    "fp8208axr-g1-etched.glb"
  ],
  "component": {
    "mpn": "FP8208AXR-G1",
    "manufacturer": "Advanced Analog Technology",
    "package": "SOP-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588945375189614592",
    "parts": {
      "symbol": "fp8208axr-g1.kicad_sym",
      "footprint": "fp8208axr-g1.kicad_mod",
      "model_3d": "fp8208axr-g1-hero.glb",
      "model_3d_plain": "fp8208axr-g1-etched.glb",
      "model_3d_step": "fp8208axr-g1-etched.step",
      "model_3d_step_plain": "fp8208axr-g1.step",
      "lbr": "fp8208axr-g1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2897215"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T10:30:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, recommended 4.8V to 5.5V, with the charger held in shutdown until VCC rises above the 4.5V UVLO threshold."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable control input where a logic level below 0.5V puts the charger into shutdown and a level above 2.5V is required for enable."
      },
      {
        "number": "3",
        "name": "CHRGB",
        "type": "output",
        "description": "Charge state indicator 1 output, which is pulled low during charging with VCHRGB at most 0.6V at 5mA sink."
      },
      {
        "number": "4",
        "name": "STDBY",
        "type": "output",
        "description": "Charge state indicator 2 output, which is pulled low at charge termination with VSTDBY at most 0.6V at 5mA sink."
      },
      {
        "number": "5",
        "name": "TEMP",
        "type": "input",
        "description": "Battery temperature detector input that stops charging when the voltage is above 80% or below 45% of VCC, and must be shorted to GND if battery temperature monitoring is not used."
      },
      {
        "number": "6",
        "name": "VBAT",
        "type": "power_out",
        "description": "Battery voltage connection where the charger regulates the float voltage to 4.2V with ±1% accuracy and the battery current is limited to 4.5A absolute maximum."
      },
      {
        "number": "7",
        "name": "VS",
        "type": "power_in",
        "description": "Charge current-sense input connected across the sense resistor RS to the BAT pin, which sets charge current against an internal 50mV reference."
      },
      {
        "number": "8",
        "name": "LX",
        "type": "input",
        "description": "Switch node and inductor connection pin, with LX voltage rated from -0.3V to 7V and LX to VCC rated at -7V."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed pad that must be connected to ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table lists VBAT only as type 'P' (power) without a direction; power_out was chose; The datasheet pin table lists LX as type 'I' (input) even though it is the switch node; the input cl; The exposed pad is labeled EP (GND) in the datasheet; it is reported as pin 9 with power_in per the ",
          "2/9 pins cited to the wrong page (name found elsewhere): ['5:TEMP@p11', '7:VS@p10']"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0519,
        "at": "2026-10-18T10:29:06"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588945375189614592",
        "pages": 16,
        "sha256": "a1938107e669b39b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "fp8208axr-g1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "fp8208axr-g1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e1f573fe236da1873aa9ac9ffb630a6dfa31b9a6a921496fb534c59fb3658c29",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}