component
FP7209XR-G12
Public Made by Adomby adom
Advanced Analog Technology LED Drivers, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6d ago |
| viewers | 6d ago |
| fp7209xr-g12-etched.glb | 6d ago |
| fp7209xr-g12-etched.step | 6d ago |
| fp7209xr-g12-hero.glb | 6d ago |
| fp7209xr-g12-hero.overlay.json | 6d ago |
| fp7209xr-g12.glb | 6d ago |
| fp7209xr-g12.kicad_mod | 6d ago |
| fp7209xr-g12.kicad_sym | 6d ago |
| fp7209xr-g12.lbr | 6d ago |
| fp7209xr-g12.step | 6d ago |
| package.json | 6d ago |
| page.json | 6d ago |
| README.md | 6d ago |
FP7209XR-G12
Advanced Analog Technology · LED Drivers · SOP-8-EP
FP7209XR-G12 from Advanced Analog Technology, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDS | power_in | Power supply for internal control circuits and gate drivers, regulated to 7.5V to 8.5V (8.0V typical) at HVDD=12V and IDS=0A, with EXT pull-up and pull-down resistance specified at VDS=8V. |
| 2 | DIM | input | Analog and digital dimming control input that accepts a DC voltage (0.275V to 2.7V valid range) or a PWM signal, shuts the part down below 0.05V, is clamped internally at 2.7V, and must not float in normal operation. |
| 3 | COMP | output | Compensation pin of the error amplifier, used with an external compensation network to stabilize the current-mode control loop. |
| 4 | FB | input | Error amplifier inverting input referenced to the internal 0.25V reference, with feedback voltage of 0.2475V to 0.2525V for the FP7209XR-G12, and LED current set by a sense resistor from FB to GND. |
| 5 | OVP | input | Over-voltage protection input, set by a resistive divider from LED+ so that EXT is turned off when OVP exceeds the 0.65V to 0.75V threshold (0.70V typical). |
| 6 | CS | input | MOSFET switch current-sense input, where the sense voltage is 85mV to 115mV and the current limit resistor RCS connected between CS and ground sets the peak inductor current. |
| 7 | HVDD | power_in | IC power supply input with a 5V to 24V operating range, 2.8V start-up voltage and 2.6V undervoltage lockout threshold. |
| 8 | EXT | output | Gate driver output for the external N-MOSFET switch, with pull-up and pull-down resistance of 0.6Ω to 1.2Ω at VDS=8V. |
| 9 | GND | power_in | IC ground on the exposed pad (EP), which must be connected to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Advanced Analog Technology |
| Package | SOP-8-EP |
| Category | LED Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage (FP7209XR-G12 variant) | VFB | 0.2475 | 0.2525 | V | G12 variant; test error excluded (footnote *1) | 5 | |
| Shutdown Current | ICC | 6 | µA | VDIM=0V | 5 | ||
| Operation Frequency | fOSC | 120 | 150 | 180 | KHZ | 5 | |
| Input Supply Voltage | VDS | 7.5 | 8 | 8.5 | V | HVDD=12V, IDS=0A | 5 |
| EXT Pull-UP Resistance | REXTH | 0.6 | 0.9 | 1.2 | Ω | VDS=8V | 5 |
| EXT Pull-Down Resistance | REXTL | 0.6 | 0.9 | 1.2 | Ω | VDS=8V | 5 |
| OVP Threshold | VOVP | 0.65 | 0.7 | 0.75 | V | 5 | |
| Sense Voltage | VCS | 85 | 100 | 115 | mV | 5 | |
| Maximum Duty Ratio | 90 | % | FB=0V | 5 | |||
| DIM Shutdown Voltage | VDIM | 0.05 | V | ICC<6µA | 5 | ||
| DIM Start-up Voltage | Vst_up | 0.275 | V | EXT Switching | 5 | ||
| Supply Voltage (recommended) | HVDD | 5 | 24 | V | 5 | ||
| Operating Temperature Range (recommended) | TA | -40 | 85 | °C | Ambient Temperature | 5 | |
| Supply Voltage | HVDD | -0.3 | 26 | V | 4 | ||
| VDS,EXT Voltage | -0.3 | 16 | V | 4 | |||
| Others Pin Voltage | -0.3 | 6 | V | 4 | |||
| Thermal Resistance (Junction to Ambient) | θJA | 60 | °C / W | SOP-8L(EP) | 4 | ||
| Thermal Resistance (Junction to Case) | θJC | 10 | °C / W | SOP-8L(EP) | 4 | ||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Operating Temperature | TOP | -40 | 85 | °C | 4 | ||
| Storage Temperature | TST | -65 | 150 | °C | 4 | ||
| Lead Temperature (soldering) | 260 | °C | soldering, 10 sec | 4 |
CAD (KiCad official)
- Symbol:
FP7209XR-G12 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
fp7209xr-g12-etched.step/fp7209xr-g12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fp7209xr-g12.step/fp7209xr-g12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Advanced Analog Technology datasheet (15 pp, sha256
4798bec6a1c809b5, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).