FP7209mR-G1

{
 "schema": "adom.pads/1",
 "slug": "fp7209mr-g1",
 "footprint": "TSSOP-14-1EP_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-14-1EP_4.4x5mm_P0.65mm@sha256:224fdf96d0906681",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.95,
   -1.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-14-1EP_4.4x5mm_P0.65mm@sha256:224fdf96d0906681"
 },
 "pad_count": 15,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VDS",
   "type": "power_out",
   "description": "Internal LDO output that supplies internal control circuits and the gate driver. Typically regulated to ~8 V from HVDD. Bypass to GND with a ceramic capacitor.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "DIM",
   "type": "input",
   "description": "Analog and digital (PWM) dimming control input. Accepts a DC voltage or PWM signal; the internal filter conditions the PWM into an average dimming reference. DIM start-up ~0.275 V, shutdown below 0.05 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "EN",
   "type": "input",
   "description": "Enable control input. Enable threshold ~1.50 V (typ), shutdown ~1.3 V, 0.2 V hysteresis. Pull below the shutdown threshold to place the part in low-current shutdown.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "COMP",
   "type": "output",
   "description": "Error amplifier compensation output. Connect an external RC network from COMP to GND to shape the control-loop response for current-mode boost regulation.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "FB",
   "type": "input",
   "description": "Error amplifier inverting input / feedback pin. Regulated to VFB = 0.25 V (typ). Connect to the top of the LED-current sense resistor to close the constant-current loop.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "OVP",
   "type": "input",
   "description": "Over-voltage protection sense input. Triggers when the pin exceeds VOVP ≈ 0.70 V (0.65-0.75 V). Drive from a resistor divider off the boost output to set the OVP trip point.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.95,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "RT",
   "type": "input",
   "description": "Switching-frequency programming pin. Connect a resistor from RT to GND to set fOSC (100 kHz-1 MHz). RT = 51 kΩ → ~370 kHz; RT open (NC) → ~150 kHz.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "SS",
   "type": "input",
   "description": "Soft-start programming pin. Connect a capacitor from SS to GND; internal ~3.5 µA current source charges it to ramp the internal reference and limit inrush current at start-up.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "SC",
   "type": "output",
   "description": "LED short-circuit control pin. Works with the SCP block (VFB ≈ 0.40 V threshold, ~700 µs restart) to implement hiccup-mode protection on an LED string short.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "CS",
   "type": "input",
   "description": "External N-MOSFET switch current-sense input. Cycle-by-cycle OCP trips at ~0.1 V; nominal current-sense regulation window VCS = 85-115 mV (typ 100 mV). Connect to the source of the switching MOSFET through a sense resistor.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "HVDD",
   "type": "power_in",
   "description": "Main IC power supply input. Operating range 5-24 V (absolute max 26 V). Start-up voltage 2.8 V; UVLO ~2.6 V with 0.2 V hysteresis. Bypass to GND close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "GND",
   "type": "power_in",
   "description": "IC ground. Tie to the system ground plane together with pin 13 and the exposed pad.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "GND",
   "type": "power_in",
   "description": "IC ground. Tie to the system ground plane together with pin 12 and the exposed pad.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.95,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.45,
    0.45
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "EXT",
   "type": "output",
   "description": "External N-MOSFET gate driver output. Rail-to-rail push/pull between GND and VDS (~8 V). Typical pull-up/pull-down resistance ~0.9 Ω.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -0.75,
    -0.9
   ],
   "rot": 0.0,
   "size": [
    1.5,
    1.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "EP",
   "type": "passive",
   "description": "Exposed thermal pad on the package bottom. Must be soldered to the PCB ground plane for both electrical ground and heat dissipation (θJA ≈ 55 °C/W).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14-1EP_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}