component
FP6359S6
Public Made by Adomby adom
Fitipower Integrated Tech DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
3395894
FP6359S6
Fitipower Integrated Tech · DC-DC Converters · SOT-23-6
FP6359S6 from Fitipower Integrated Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control pin: pull high to turn the IC on and pull low to disable it; do not leave floating (rising threshold 1.5V, falling threshold 0.4V). |
| 2 | GND | power_in | Ground pin. |
| 3 | LX | passive | Power switching node connecting the inductor to the drains of the internal high-side PMOS and low-side NMOS. |
| 4 | VIN | power_in | Power supply input pin for 2.7V to 6V, with input capacitors placed as close as possible from VIN to GND. |
| 5 | PG | output | Open-drain power good output that requires a pull-up resistor, is held low in soft-start, standby and shutdown, and is released when the output rises above 90% of nominal. |
| 6 | FB | input | Voltage feedback input connected to VOUT through a resistive divider, regulated at 0.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fitipower Integrated Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.7 | 6 | V | VIN=5V, TA=25°C | 5 | |
| Shutdown Current | ISD | 0.1 | 1 | μA | EN=GND | 5 | |
| Supply Current | IDD | 5 | mA | 5 | |||
| Feedback Reference Voltage | VREF | 0.591 | 0.6 | 0.609 | V | 5 | |
| FB Input Current | IFB | -50 | 50 | nA | VFB=VIN | 5 | |
| Oscillation Frequency | FOSC | 0.8 | 1 | 1.2 | MHz | 5 | |
| P-Channel MOSFET On-Resistance | RDS(ON),P | 95 | mΩ | Guarantee by design | 5 | ||
| N-Channel MOSFET On-Resistance | RDS(ON),N | 75 | mΩ | Guarantee by design | 5 | ||
| P-Channel Current Limit | ILIM | 4 | A | Guarantee by design | 5 | ||
| EN Rising Threshold | VENH | 1.5 | V | 5 | |||
| EN Falling Threshold | VENL | 0.4 | V | 5 | |||
| Input UVLO Threshold | VUVLO | 2.7 | V | 5 | |||
| UVLO Hysteresis | VHYS | 0.2 | V | 5 | |||
| Minimum ON Time | 50 | ns | 5 | ||||
| Maximum Duty Cycle | 100 | % | 5 | ||||
| Internal Soft Start Time | TSS | 1 | ms | 5 | |||
| PG Rising Threshold | VPG (H) | 90 | % | VFB Rising | 5 | ||
| PG Sink Current | IPG | 1 | mA | VPG=0.1V | 5 | ||
| VOUT Discharge Resistance | 100 | Ω | 5 | ||||
| Thermal Shutdown Temperature | TSD | 150 | °C | Guarantee by design | 5 | ||
| VIN to GND | VIN | -0.3 | 6.5 | V | 4 | ||
| LX to GND | LX | -0.3 | V | max is VIN+0.3V | 4 | ||
| EN, FB, PG to GND | -0.3 | V | max is VIN | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Supply Input Voltage | VIN | 2.7 | 6 | V | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Package Thermal Resistance | θJA | 250 | ºC/W | SOT-23-6 | 4 | ||
| Package Thermal Resistance | θJC | 110 | °C/W | SOT-23-6 | 4 |
CAD (KiCad official)
- Symbol:
FP6359S6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
fp6359s6-etched.step/fp6359s6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fp6359s6.step/fp6359s6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fitipower Integrated Tech datasheet (10 pp, sha256
eb55429fb410d611, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FP6359S6
**Fitipower Integrated Tech** · DC-DC Converters · SOT-23-6
FP6359S6 from Fitipower Integrated Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control pin: pull high to turn the IC on and pull low to disable it; do not leave floating (rising threshold 1.5V, falling threshold 0.4V). |
| 2 | GND | power_in | Ground pin. |
| 3 | LX | passive | Power switching node connecting the inductor to the drains of the internal high-side PMOS and low-side NMOS. |
| 4 | VIN | power_in | Power supply input pin for 2.7V to 6V, with input capacitors placed as close as possible from VIN to GND. |
| 5 | PG | output | Open-drain power good output that requires a pull-up resistor, is held low in soft-start, standby and shutdown, and is released when the output rises above 90% of nominal. |
| 6 | FB | input | Voltage feedback input connected to VOUT through a resistive divider, regulated at 0.6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fitipower Integrated Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.7 | | 6 | V | VIN=5V, TA=25°C | 5 |
| Shutdown Current | ISD | | 0.1 | 1 | μA | EN=GND | 5 |
| Supply Current | IDD | | | 5 | mA | | 5 |
| Feedback Reference Voltage | VREF | 0.591 | 0.6 | 0.609 | V | | 5 |
| FB Input Current | IFB | -50 | | 50 | nA | VFB=VIN | 5 |
| Oscillation Frequency | FOSC | 0.8 | 1 | 1.2 | MHz | | 5 |
| P-Channel MOSFET On-Resistance | RDS(ON),P | | 95 | | mΩ | Guarantee by design | 5 |
| N-Channel MOSFET On-Resistance | RDS(ON),N | | 75 | | mΩ | Guarantee by design | 5 |
| P-Channel Current Limit | ILIM | | 4 | | A | Guarantee by design | 5 |
| EN Rising Threshold | VENH | | 1.5 | | V | | 5 |
| EN Falling Threshold | VENL | | 0.4 | | V | | 5 |
| Input UVLO Threshold | VUVLO | | 2.7 | | V | | 5 |
| UVLO Hysteresis | VHYS | | 0.2 | | V | | 5 |
| Minimum ON Time | | | 50 | | ns | | 5 |
| Maximum Duty Cycle | | | 100 | | % | | 5 |
| Internal Soft Start Time | TSS | | 1 | | ms | | 5 |
| PG Rising Threshold | VPG (H) | | 90 | | % | VFB Rising | 5 |
| PG Sink Current | IPG | | 1 | | mA | VPG=0.1V | 5 |
| VOUT Discharge Resistance | | | 100 | | Ω | | 5 |
| Thermal Shutdown Temperature | TSD | | 150 | | °C | Guarantee by design | 5 |
| VIN to GND | VIN | -0.3 | | 6.5 | V | | 4 |
| LX to GND | LX | -0.3 | | | V | max is VIN+0.3V | 4 |
| EN, FB, PG to GND | | -0.3 | | | V | max is VIN | 4 |
| Junction Temperature | TJ | | | 150 | °C | | 4 |
| Lead Temperature | | | | 260 | °C | Soldering, 10 sec. | 4 |
| Storage Temperature Range | | -65 | | 150 | °C | | 4 |
| Supply Input Voltage | VIN | 2.7 | | 6 | V | | 4 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 4 |
| Ambient Temperature Range | TA | -40 | | 85 | °C | | 4 |
| Package Thermal Resistance | θJA | | 250 | | ºC/W | SOT-23-6 | 4 |
| Package Thermal Resistance | θJC | | 110 | | °C/W | SOT-23-6 | 4 |
## CAD (KiCad official)
- Symbol: `FP6359S6`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `fp6359s6-etched.step` / `fp6359s6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fp6359s6.step` / `fp6359s6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Fitipower Integrated Tech datasheet](docs/fp6359s6-datasheet.pdf) (10 pp, sha256 `eb55429fb410d611`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fp6359s6-datasheet.pdf)