component
FP6296XR-G1
Public Made by Adomby adom
Advanced Analog Technology DC-DC Converters, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,7 +32,7 @@ "number": "1", "name": "LX", "type": "output",- "description": "Power switch output. Drain of the internal 15 m\u03a9 / 14 V / 10 A N-channel power MOSFET; connects to the boost inductor and Schottky diode anode. Pin 1 and pin 2 are tied together internally for higher current-carrying capability."+ "description": "Power switch output. Drain of the internal 15 mΩ / 14 V / 10 A N-channel power MOSFET; connects to the boost inductor and Schottky diode anode. Pin 1 and pin 2 are tied together internally for higher current-carrying capability." }, { "number": "2",@@ -50,37 +50,37 @@ "number": "4", "name": "EN", "type": "input",- "description": "Enable control input, active high. VEN \u2265 1.1 V enables the converter; VEN \u2264 0.6 V shuts it down (IDD \u2264 1 \u00b5A in shutdown). Do not leave floating."+ "description": "Enable control input, active high. VEN ≥ 1.1 V enables the converter; VEN ≤ 0.6 V shuts it down (IDD ≤ 1 µA in shutdown). Do not leave floating." }, { "number": "5", "name": "FB", "type": "input",- "description": "Error amplifier inverting input (feedback). Connect to a resistor divider from VOUT; regulates to the internal 1.2 V (\u00b12%) reference (VREF = 1.176-1.224 V)."+ "description": "Error amplifier inverting input (feedback). Connect to a resistor divider from VOUT; regulates to the internal 1.2 V (±2%) reference (VREF = 1.176-1.224 V)." }, { "number": "6", "name": "COMP", "type": "output",- "description": "Loop compensation node. Error amplifier output; connect an R-C network to GND to stabilize the current-mode control loop. Sink/source capability \u2248 45 \u00b5A."+ "description": "Loop compensation node. Error amplifier output; connect an R-C network to GND to stabilize the current-mode control loop. Sink/source capability ≈ 45 µA." }, { "number": "7", "name": "OC", "type": "input",- "description": "Adjustable over-current limit programming pin. Connect a resistor (150 k\u03a9 \u2194 51 k\u03a9) from OC to GND to set the peak current limit between 2 A and 10 A. Leaving this pin floating disables the adjustment (invalid); the default OCP is 10 A."+ "description": "Adjustable over-current limit programming pin. Connect a resistor (150 kΩ ↔ 51 kΩ) from OC to GND to set the peak current limit between 2 A and 10 A. Leaving this pin floating disables the adjustment (invalid); the default OCP is 10 A." }, { "number": "8", "name": "HVDD", "type": "power_in",- "description": "IC power supply input, 2.7 V to 12 V (abs max 12 V). Provides bias for the internal LDO that generates VCC; also monitored by the UVLO circuit (VUVLO \u2248 2.2 V, 0.1 V hysteresis)."+ "description": "IC power supply input, 2.7 V to 12 V (abs max 12 V). Provides bias for the internal LDO that generates VCC; also monitored by the UVLO circuit (VUVLO ≈ 2.2 V, 0.1 V hysteresis)." }, { "number": "EP", "name": "GND", "type": "power_in",- "description": "IC ground - exposed thermal pad on the bottom of the SOP-8L(EP) package. Must be soldered to the PCB ground plane for correct electrical operation and heat dissipation (\u03b8JC \u2248 10 \u00b0C/W, \u03b8JA \u2248 60 \u00b0C/W)."+ "description": "IC ground - exposed thermal pad on the bottom of the SOP-8L(EP) package. Must be soldered to the PCB ground plane for correct electrical operation and heat dissipation (θJC ≈ 10 °C/W, θJA ≈ 60 °C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/fp6296xr-g1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }