component
FP6161KR-LF-ADJ
Public Made by Adomby adom
Advanced Analog Technology DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFP6161KR-LF-ADJ
Advanced Analog Technology · DC-DC Converters · SOT-23-5
FP6161KR-LF-ADJ from Advanced Analog Technology, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RUN | input | Enable pin; the RUN threshold is 0.3 to 1.5V (1V typical), and the RUN leakage current is ±1µA maximum. |
| 2 | GND | power_in | Ground pin; the input and output capacitor ground connections should be kept as close as possible and tied to the ground plane with several vias. |
| 3 | SW | output | Switch node connected to the internal P-channel and N-channel MOSFETs; DC switch current is limited to 1.5A and AC peak to 2A, and the pin goes high-impedance during short-circuit protection. |
| 4 | VIN | power_in | Power supply input, operating from 2.5V to 5.5V with an absolute maximum of 6V, and it should be decoupled close to the pin with a low-ESR input capacitor. |
| 5 | FB / VOUT | input | Feedback pin with a 0.6V reference (±2%); in the adjustable version the output divider R1/R2 connects here directly, and FB dropping below 300mV triggers short-circuit protection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Advanced Analog Technology |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | VIN | -0.3 | 6 | V | 4 | ||
| RUN, VFB, SW Pin Voltage | -0.3 | V | 4 | ||||
| P-Channel Switch Source Current (DC) | 1.5 | A | 4 | ||||
| N-Channel Switch Source Current (DC) | 1.5 | A | 4 | ||||
| Peak SW Switch Sink and Source Current (AC) | 2 | A | 4 | ||||
| Allowable Power Dissipation, SOT23-5L | PD | 500 | mW | 4 | |||
| Lead Temperature | 260 | °C | soldering, 10 sec | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Thermal Resistance (Junction to Ambient), SOT23-5L | θJA | 250 | °C / W | 4 | |||
| Thermal Resistance (Junction to Case), SOT23-5L | θJC | 90 | °C / W | 4 | |||
| Supply Voltage | VIN | 2.5 | 5.5 | V | 5 | ||
| Operating Temperature | -40 | 85 | °C | 5 | |||
| Regulated Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | TA=25°C | 5 |
| Regulated Feedback Voltage | VFB | 0.582 | 0.6 | 0.618 | V | -40°C ~+85°C | 5 |
| Line Regulation with VREF | VFB | 0.04 | 0.4 | / V | VIN=2.5V to 5.5V | 5 | |
| Output Voltage Line Regulation | VOUT | 0.04 | 0.4 | % / V | VIN=2.5 to 5.5V | 5 | |
| RDS (ON) of P-Channel FET | RDS(ON)P | 0.28 | 0.35 | Ω | ISW=100mA | 5 | |
| RDS (ON) of N-Channel FET | RDS(ON)N | 0.25 | 0.32 | Ω | ISW =-100mA | 5 | |
| SW Leakage | ILSW | -1 | 0.01 | 1 | µA | VRUN=0V, VIN=5V | 5 |
| Peak Inductor Current | IPK | 1.125 | 1.5 | 1.875 | A | VFB=0.5V | 5 |
| Quiescent Current, Shutdown | ICC | 0.1 | 1 | µA | Shutdown, VRUN=0V | 5 | |
| RUN Threshold | VRUN | 0.3 | 1 | 1.5 | V | 5 | |
| RUN Leakage Current | IRUN | -1 | 0.01 | 1 | µA | 5 | |
| Oscillator Frequency | FOSC | 1.2 | 1.5 | 1.8 | MHz | VFB=0.6V | 5 |
| Quiescent Current, Active | ICC | 100 | µA | Active, VFB=0.5V, VRUN=VIN | 5 |
CAD (KiCad official)
- Symbol:
FP6161KR-LF-ADJ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
fp6161kr-lf-adj-etched.step/fp6161kr-lf-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fp6161kr-lf-adj.step/fp6161kr-lf-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Advanced Analog Technology datasheet (16 pp, sha256
57d16b398207d125, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).