component
FODM453R2V
Public Made by Adomby adom
onsemi Logic Output Optoisolators, SOIC-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFODM453R2V
onsemi · Logic Output Optoisolators · SOIC-5
FODM453R2V from onsemi, in a SOIC-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode of the AlGaAs input emitter, rated for 25 mA DC average forward input current, 50 mA peak (50% duty cycle, 1 ms), and 1.0 A transient (≤1 µs). |
| 3 | CATHODE | passive | LED cathode of the input emitter, with a reverse input voltage limit of 5 V. |
| 4 | GND | power_in | Output ground for the detector side, the reference for VO and VCC. |
| 5 | VO | output | Detector transistor output, logic high when the LED is off and logic low when the LED is on; output voltage rated -0.5 to 20 V, average output current 8 mA, peak 16 mA. |
| 6 | VCC | power_in | Output-side supply voltage, rated -0.5 to 30 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-5 |
| Category | Optoisolators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 | 125 | °C | 4 | ||
| Operating Temperature | TOPR | -40 | 85 | °C | 4 | ||
| DC/Average Forward Input Current | IF (avg) | 25 | mA | 4 | |||
| Peak Forward Input Current | IF (pk) | 50 | mA | 50% duty cycle, 1ms P.W. | 4 | ||
| Peak Transient Input Current | IF (trans) | 1 | A | ≤1µs P.W., 300pps | 4 | ||
| Reverse Input Voltage | VR | 5 | V | 4 | |||
| Input Power Dissipation | PD | 45 | mW | No derating required over specified operating temp range | 4 | ||
| Average Output Current | IO (avg) | 8 | mA | 4 | |||
| Peak Output Current | IO (pk) | 16 | mA | 4 | |||
| Supply Voltage | VCC | -0.5 | 30 | V | 4 | ||
| Output Voltage | VO | -0.5 | 20 | V | 4 | ||
| Output Power Dissipation | PD | 100 | mW | No derating required over specified operating temp range | 4 | ||
| Input Forward Voltage | VF | 1.6 | 1.7 | V | IF = 16mA, TA = 25°C | 5 | |
| Input Forward Voltage | VF | 1.8 | V | IF = 16mA | 5 | ||
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10µA | 5 | ||
| Logic High Output Current | IOH | 0.001 | 0.5 | µA | IF = 0mA, VO = VCC = 5.5V, TA = 25°C | 5 | |
| Logic High Output Current | IOH | 0.001 | 1 | µA | IF = 0 mA, VO = VCC = 15V, TA = 25°C | 5 | |
| Logic High Output Current | IOH | 50 | µA | IF = 0mA, VO = VCC = 15V | 5 | ||
| Logic Low Supply Current | ICCL | 100 | 200 | µA | IF = 16mA, VO = Open, VCC = 15V | 5 | |
| Logic High Supply Current | ICCH | 0.05 | 1 | µA | IF = 0 mA, VO = Open, VCC = 15V, TA = 25°C | 5 | |
| Logic High Supply Current | ICCH | 2 | µA | IF = 0mA, VO = Open, VCC = 15V | 5 | ||
| Current Transfer Ratio | CTR | 20 | 50 | % | IF = 16mA, VCC = 4.5V, TA = 25°C, VOL = 0.4V | 5 | |
| Current Transfer Ratio | CTR | 15 | % | IF = 16mA, VCC = 4.5V, VOL = 0.5V | 5 | ||
| Logic LOW Output Voltage | VOL | 0.4 | V | IF = 16mA, IO = 3mA, VCC = 4.5V, TA = 25°C | 5 | ||
| Logic LOW Output Voltage | VOL | 0.5 | V | IF = 16mA, IO = 2.4mA, VCC = 4.5 V | 5 | ||
| Propagation Delay Time to Logic LOW | TPHL | 0.4 | 0.8 | µs | RL = 1.9kΩ, IF = 16mA, TA = 25°C (Fig. 9) | 5 | |
| Propagation Delay Time to Logic LOW | TPHL | 1 | µs | RL = 1.9kΩ, IF = 16mA (Fig. 9) | 5 | ||
| Propagation Delay Time to Logic HIGH | TPLH | 0.35 | 0.8 | µs | RL = 1.9kΩ, IF = 16mA, TA = 25°C (Fig. 9) | 5 | |
| Propagation Delay Time to Logic HIGH | TPLH | 1 | µs | RL = 1.9kΩ, IF = 16mA (Fig. 9) | 5 | ||
| Common Mode Transient Immunity at Logic HIGH (FODM453) | /CMH/ | 15 | 40 | kV/µs | IF = 0mA, VCM = 1500VP-P, RL = 1.9kΩ, TA = 25°C (Fig. 10) | 5 | |
| Common Mode Transient Immunity at Logic LOW (FODM453) | /CML/ | 15 | 40 | kV/µs | IF = 16mA, VCM = 1500VP-P, RL = 1.9kΩ, TA = 25°C (Fig. 10) | 5 | |
| Input Forward Voltage Temperature Coefficient | ∆VF/∆TA | -1.8 | mV/°C | IF = 16mA | 5 | ||
| Bandwidth | BW | 3 | MHz | RL = 100Ω | 5 | ||
| Capacitance (Input to Output) | CI-O | 0.2 | pF | f = 1MHz | 5 |
CAD (KiCad official)
- Symbol:
FODM453R2V - Footprint:
Package_SO:SOIC-5-6_4.4x3.6mm_P1.27mm - 3D model: SOIC-5 (KiCad packages3D, STEP)
- 3D model files:
fodm453r2v-etched.step/fodm453r2v-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fodm453r2v.step/fodm453r2v.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (16 pp, sha256
44e403c95510a3c6, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).