component
FOD3120TV
Public Made by Adomby adom
onsemi Optocouplers - Logic Output, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
dbc4e09
FOD3120TV
onsemi · Optocouplers - Logic Output · DIP-8
FOD3120TV from onsemi, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected internally; leave this pin unconnected. |
| 2 | Anode | input | LED anode of the input optocoupler; the datasheet specifies input forward current of 7 mA to 16 mA for ON state and 0 V to 0.8 V for OFF state. |
| 3 | Cathode | input | LED cathode of the input optocoupler; the datasheet specifies input reverse breakdown of 5 V minimum and input reverse voltage rating of 5 V. |
| 4 | NC | unconnected | Not connected internally; leave this pin unconnected. |
| 5 | VSS | power_in | Negative supply voltage (ground reference); the recommended VDD minus VSS supply range is 15 V to 30 V, and a bypass capacitor must be connected between pins 5 and 8. |
| 6 | VO2 | output | Output voltage 2, internally connected to VO1; the peak output current rating is 3.0 A. |
| 7 | VO1 | output | Output voltage 1 of the push-pull P-channel MOSFET driver stage; the peak output current rating is 3.0 A. |
| 8 | VDD | power_in | Positive supply voltage; the recommended VDD minus VSS range is 15 V to 30 V and the absolute maximum supply voltage is 35 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Forward Voltage | VF | 1.2 | 1.5 | 1.8 | V | IF = 10 mA | 4 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 µA | 4 | ||
| High Level Output Current | IOH | -1 | -2 | -2.5 | A | VO = VDD, 3 V | 4 |
| High Level Output Current | IOH | -2 | -2.5 | A | VO = VDD, 6 V | 4 | |
| Low Level Output Current | IOL | 1 | 2 | 2.5 | A | VO = VSS + 3 V | 4 |
| Low Level Output Current | IOL | 2 | 2.5 | A | VO = VSS + 6 V | 4 | |
| High Level Supply Current | IDDH | 2.8 | 3.8 | mA | VO = Open, IF = 7 to 16 mA | 4 | |
| Low Level Supply Current | IDDL | 2.8 | 3.8 | mA | VO = Open, VF = 0 to 0.8 V | 4 | |
| Threshold Input Current Low to High | IFLH | 2.3 | 5 | mA | IO = 0 mA, VO > 5 V | 4 | |
| Threshold Input Voltage High to Low | VFHL | 0.8 | V | IO = 0 mA, VO < 5 V | 4 | ||
| Under Voltage Lockout Threshold (positive going) | VUVLO+ | 11.5 | 12.7 | 13.5 | V | IF = 10mA, VO > 5 V | 4 |
| Under Voltage Lockout Threshold (negative going) | VUVLO− | 10 | 11.2 | 12 | V | IF = 10 mA, VO < 5 V | 4 |
| Propagation Delay Time to Logic Low Output | tPHL | 150 | 275 | 400 | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 |
| Propagation Delay Time to Logic High Output | tPLH | 150 | 255 | 400 | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 |
| Pulse Width Distortion | PWD | 20 | 100 | ns | / tPHL, tPLH / | 4 | |
| Propagation Delay Difference Between Any Two Parts or Channels | PDD | -250 | 250 | ns | (tPHL, tPLH) (Note 10) | 4 | |
| Common Mode Transient Immunity at Output High | /CMH/ | 35 | 50 | kV/µs | TA = 25°C, VDD = 30 V, IF = 7 to 16 mA, VCM = 2000 V | 4 | |
| Common Mode Transient Immunity at Output Low | /CML/ | 35 | 50 | kV/µs | TA = 25°C, VDD = 30 V, VF = 0 V, VCM = 2000 V | 4 | |
| Input−Output Isolation Voltage | VISO | 5000 | VRMS | TA = 25°C, R.H.< 50 %, t = 1.0 min., II−O ≤ 10 µA, 50 Hz | 3 | ||
| Storage Temperature | TSTG | -55 | 125 | °C | 3 | ||
| Operating Temperature | TOPR | -40 | 100 | °C | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Lead Wave Solder Temperature | TSOL | 260 | °C | for 10 s | 3 | ||
| Average Input Current | IF(AVG) | 25 | mA | 3 | |||
| Peak Transient Forward Current | IF(Peak) | 1 | A | Note 2 | 3 | ||
| Operating Frequency | f | 50 | kHz | Note 3 | 3 | ||
| Reverse Input Voltage | VR | 5 | V | 3 | |||
| Peak Output Current | IO(PEAK) | 3 | A | Note 4 | 3 | ||
| Supply Voltage | VDD, VSS | 0 | 35 | V | 3 | ||
| Supply Voltage | VDD, VSS | 0 | 30 | V | TA ≥ 90°C | 3 | |
| Input Signal Rise and Fall Time | tR(IN), tF(IN) | 500 | ns | 3 | |||
| Input Power Dissipation | PDI | 45 | mW | Note 5, Note 7 | 3 | ||
| Output Power Dissipation | PDO | 250 | mW | Note 6, Note 7 | 3 | ||
| Ambient Operating Temperature | TA | -40 | 100 | °C | 3 | ||
| Power Supply | VDD, VSS | 15 | 30 | V | 3 | ||
| Input Current (ON) | IF(ON) | 7 | 16 | mA | 3 | ||
| Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 3 | ||
| Temperature Coefficient of Forward Voltage | ΔVF/ΔTA | -1.8 | mV/°C | 4 | |||
| Input Capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0 V | 4 | ||
| Under Voltage Lockout Threshold Hysteresis | UVLOHYS | 1.5 | V | 4 | |||
| Output Rise Time (10%, 90%) | tR | 60 | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 | ||
| Output Fall Time (90%, 10%) | tF | 60 | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 | ||
| UVLO Turn On Delay | tUVLO ON | 1.6 | µs | IF = 10 mA , VO > 5 V | 4 | ||
| UVLO Turn Off Delay | tUVLO OFF | 0.4 | µs | IF = 10 mA , VO < 5 V | 4 | ||
| Isolation Capacitance | CISO | 1 | pF | VI−O = 0 V, Frequency = 1.0 MHz | 3 |
CAD (KiCad official)
- Symbol:
FOD3120TV - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
fod3120tv-etched.step/fod3120tv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fod3120tv.step/fod3120tv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (19 pp, sha256
74bf4975a2829f62, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FOD3120TV
**onsemi** · Optocouplers - Logic Output · DIP-8
FOD3120TV from onsemi, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected internally; leave this pin unconnected. |
| 2 | Anode | input | LED anode of the input optocoupler; the datasheet specifies input forward current of 7 mA to 16 mA for ON state and 0 V to 0.8 V for OFF state. |
| 3 | Cathode | input | LED cathode of the input optocoupler; the datasheet specifies input reverse breakdown of 5 V minimum and input reverse voltage rating of 5 V. |
| 4 | NC | unconnected | Not connected internally; leave this pin unconnected. |
| 5 | VSS | power_in | Negative supply voltage (ground reference); the recommended VDD minus VSS supply range is 15 V to 30 V, and a bypass capacitor must be connected between pins 5 and 8. |
| 6 | VO2 | output | Output voltage 2, internally connected to VO1; the peak output current rating is 3.0 A. |
| 7 | VO1 | output | Output voltage 1 of the push-pull P-channel MOSFET driver stage; the peak output current rating is 3.0 A. |
| 8 | VDD | power_in | Positive supply voltage; the recommended VDD minus VSS range is 15 V to 30 V and the absolute maximum supply voltage is 35 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Forward Voltage | VF | 1.2 | 1.5 | 1.8 | V | IF = 10 mA | 4 |
| Input Reverse Breakdown Voltage | BVR | 5 | | | V | IR = 10 µA | 4 |
| High Level Output Current | IOH | -1 | -2 | -2.5 | A | VO = VDD, 3 V | 4 |
| High Level Output Current | IOH | -2 | -2.5 | | A | VO = VDD, 6 V | 4 |
| Low Level Output Current | IOL | 1 | 2 | 2.5 | A | VO = VSS + 3 V | 4 |
| Low Level Output Current | IOL | 2 | 2.5 | | A | VO = VSS + 6 V | 4 |
| High Level Supply Current | IDDH | | 2.8 | 3.8 | mA | VO = Open, IF = 7 to 16 mA | 4 |
| Low Level Supply Current | IDDL | | 2.8 | 3.8 | mA | VO = Open, VF = 0 to 0.8 V | 4 |
| Threshold Input Current Low to High | IFLH | | 2.3 | 5 | mA | IO = 0 mA, VO > 5 V | 4 |
| Threshold Input Voltage High to Low | VFHL | 0.8 | | | V | IO = 0 mA, VO < 5 V | 4 |
| Under Voltage Lockout Threshold (positive going) | VUVLO+ | 11.5 | 12.7 | 13.5 | V | IF = 10mA, VO > 5 V | 4 |
| Under Voltage Lockout Threshold (negative going) | VUVLO− | 10 | 11.2 | 12 | V | IF = 10 mA, VO < 5 V | 4 |
| Propagation Delay Time to Logic Low Output | tPHL | 150 | 275 | 400 | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 |
| Propagation Delay Time to Logic High Output | tPLH | 150 | 255 | 400 | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 |
| Pulse Width Distortion | PWD | | 20 | 100 | ns | / tPHL, tPLH / | 4 |
| Propagation Delay Difference Between Any Two Parts or Channels | PDD | -250 | | 250 | ns | (tPHL, tPLH) (Note 10) | 4 |
| Common Mode Transient Immunity at Output High | /CMH/ | 35 | 50 | | kV/µs | TA = 25°C, VDD = 30 V, IF = 7 to 16 mA, VCM = 2000 V | 4 |
| Common Mode Transient Immunity at Output Low | /CML/ | 35 | 50 | | kV/µs | TA = 25°C, VDD = 30 V, VF = 0 V, VCM = 2000 V | 4 |
| Input−Output Isolation Voltage | VISO | 5000 | | | VRMS | TA = 25°C, R.H.< 50 %, t = 1.0 min., II−O ≤ 10 µA, 50 Hz | 3 |
| Storage Temperature | TSTG | -55 | | 125 | °C | | 3 |
| Operating Temperature | TOPR | -40 | | 100 | °C | | 3 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Lead Wave Solder Temperature | TSOL | | | 260 | °C | for 10 s | 3 |
| Average Input Current | IF(AVG) | | | 25 | mA | | 3 |
| Peak Transient Forward Current | IF(Peak) | | | 1 | A | Note 2 | 3 |
| Operating Frequency | f | | | 50 | kHz | Note 3 | 3 |
| Reverse Input Voltage | VR | | | 5 | V | | 3 |
| Peak Output Current | IO(PEAK) | | | 3 | A | Note 4 | 3 |
| Supply Voltage | VDD, VSS | 0 | | 35 | V | | 3 |
| Supply Voltage | VDD, VSS | 0 | | 30 | V | TA ≥ 90°C | 3 |
| Input Signal Rise and Fall Time | tR(IN), tF(IN) | | | 500 | ns | | 3 |
| Input Power Dissipation | PDI | | | 45 | mW | Note 5, Note 7 | 3 |
| Output Power Dissipation | PDO | | | 250 | mW | Note 6, Note 7 | 3 |
| Ambient Operating Temperature | TA | -40 | | 100 | °C | | 3 |
| Power Supply | VDD, VSS | 15 | | 30 | V | | 3 |
| Input Current (ON) | IF(ON) | 7 | | 16 | mA | | 3 |
| Input Voltage (OFF) | VF(OFF) | 0 | | 0.8 | V | | 3 |
| Temperature Coefficient of Forward Voltage | ΔVF/ΔTA | | -1.8 | | mV/°C | | 4 |
| Input Capacitance | CIN | | 60 | | pF | f = 1 MHz, VF = 0 V | 4 |
| Under Voltage Lockout Threshold Hysteresis | UVLOHYS | | 1.5 | | V | | 4 |
| Output Rise Time (10%, 90%) | tR | | 60 | | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 |
| Output Fall Time (90%, 10%) | tF | | 60 | | ns | IF = 7 mA to 16 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50 % | 4 |
| UVLO Turn On Delay | tUVLO ON | | 1.6 | | µs | IF = 10 mA , VO > 5 V | 4 |
| UVLO Turn Off Delay | tUVLO OFF | | 0.4 | | µs | IF = 10 mA , VO < 5 V | 4 |
| Isolation Capacitance | CISO | | 1 | | pF | VI−O = 0 V, Frequency = 1.0 MHz | 3 |
## CAD (KiCad official)
- Symbol: `FOD3120TV`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `fod3120tv-etched.step` / `fod3120tv-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fod3120tv.step` / `fod3120tv.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/fod3120tv-d.pdf) (19 pp, sha256 `74bf4975a2829f62`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fod3120tv-datasheet.pdf)