component
FNRH252012S-100MT
Public Made by Adomby adom
cjiang Changjiang Microelectronics Tech Power Inductors, 1008. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
FNRH252012S-100MT
cjiang Changjiang Microelectronics Tech · Power Inductors · 1008
FNRH252012S-100MT from cjiang Changjiang Microelectronics Tech, in a 1008. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | cjiang Changjiang Microelectronics Tech |
| Package | 1008 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (FNRH252012S-100MT, code M) | L | -20 | 20 | % | 1MHz/1V | 2 | |
| Operating temperature range (individual chip without packing, including self-heating) | -40 | 125 | ℃ | Individual chip without packing; includes self-heating | 1 | ||
| Storage temperature range (packaging conditions) | -10 | 40 | ℃ | Packaging conditions; RH 70% (Max.) | 1 | ||
| Inductance change after high temperature storage | -10 | 10 | % | Storage 125±5℃, 96±4 h; measured after 24 h recovery at room ambient | 3 | ||
| Inductance change after low temperature storage | -10 | 10 | % | -40±5℃, 96±4 h; measured after 24 h recovery at room ambient | 3 | ||
| Inductance change after vibration | -10 | 10 | % | 10Hz |
3 | ||
| Inductance change after high temperature storage tested (humidity) | -10 | 10 | % | 60±2℃, 90-95% RH, 96±4 h; measured after 24 h recovery | 3 | ||
| Inductance change after resistance to soldering heat | -10 | 10 | % | Reflow profile per Fig.7.6-1; test board 1.0 mm glass epoxy | 3 | ||
| Inductance change after thermal shock | -10 | 10 | % | -40±3℃ 30±3 min to 105℃ 30±3 min, max 3 min transfer, 100 cycles | 3 | ||
| DC resistance (DCR), max | DCR | 0.522 | Ω | 2 | |||
| Saturation current (Isat), max | Isat | 0.7 | A | Max value: DC current at which L drops less than 30% (Note 2) | 2 | ||
| Heat rating current (Irms), max | Irms | 0.78 | A | Max value: ΔT < 40℃ from 20℃ ambient (Note 3) | 2 | ||
| Nominal inductance | L | 10 | uH | 1MHz/1V | 2 | ||
| DC resistance (DCR), typ | DCR | 0.435 | Ω | 2 | |||
| Saturation current (Isat), typ | Isat | 0.85 | A | Typ value: DC current at which L drops 30% (Note 2) | 2 | ||
| Heat rating current (Irms), typ | Irms | 0.86 | A | Typ value: ΔT approx. 40℃ from 20℃ ambient (Note 3) | 2 |
CAD (KiCad official)
- Symbol:
FNRH252012S-100MT - Footprint:
Inductor_SMD:L_1008_2520Metric - 3D model: 1008 (KiCad packages3D, STEP)
- 3D model files:
fnrh252012s-100mt-etched.step/fnrh252012s-100mt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fnrh252012s-100mt.step/fnrh252012s-100mt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: cjiang Changjiang Microelectronics Tech datasheet (5 pp, sha256
abec7a0b6f20c0a2, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).