component
FMMTL619TA
Public Made by Adomby adom
Diodes Incorporated Bipolar Transistors - BJT, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownFMMTL619TA
Diodes Incorporated · Bipolar Transistors - BJT · SOT-23-3
FMMTL619TA from Diodes Incorporated, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | passive | Base; absolute maximum base current is 200mA and emitter-base voltage is 7V. |
| 2 | E | passive | Emitter; emitter-base breakdown voltage BVEBO is 7V minimum at IE = 100µA. |
| 3 | C | passive | Collector (single lead on one side of the package); VCEO is 50V, VCBO is 100V, continuous current is 1.25A and peak pulse current is 2A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-3 |
| Category | Triode/MOS Tube/Transistor |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Voltage | VCBO | 100 | V | 2 | |||
| Collector-Emitter Voltage | VCEO | 50 | V | 2 | |||
| Emitter-Base Voltage | VEBO | 7 | V | 2 | |||
| Continuous Collector Current | IC | 1.25 | A | 2 | |||
| Peak Pulse Current | ICM | 2 | A | 2 | |||
| Base Current | IB | 200 | mA | 2 | |||
| Power Dissipation (Note 5) | PD | 500 | mW | Note 5: collector lead on 15mm x 15mm 1oz Cu, single-sided 1.6mm FR4, still air | 2 | ||
| Power Dissipation (Note 6) | PD | 675 | mW | Note 6: as Note 5, t ≤ 5 seconds | 2 | ||
| Thermal Resistance, Junction to Ambient (Note 5) | RJA | 250 | °C/W | Note 5: as above, still air | 2 | ||
| Thermal Resistance, Junction to Ambient (Note 6) | RθJA | 185 | °C/W | Note 6: t ≤ 5 seconds | 2 | ||
| Thermal Resistance, Junction to Lead (Note 7) | RJL | 197 | °C/W | Note 7: junction to solder-point at end of collector lead | 2 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 150 | °C | 2 | ||
| Electrostatic Discharge - Human Body Model | ESD HBM | 4000 | V | JEDEC Class 3A | 2 | ||
| Electrostatic Discharge - Machine Model | ESD MM | 400 | V | JEDEC Class C | 2 | ||
| Collector-Base Breakdown Voltage | BVCBO | 100 | 210 | V | IC = 100µA | 4 | |
| Collector-Emitter Breakdown Voltage (Note 9) | BVCEO | 50 | 70 | V | IC = 5mA | 4 | |
| Emitter-Base Breakdown Voltage | BVEBO | 7 | 8.5 | V | IE = 100µA | 4 | |
| Collector Cut-Off Current | ICBO | 10 | nA | VCB = 80V | 4 | ||
| Emitter Cut-Off Current | IEBO | 10 | nA | VEB = 6V | 4 | ||
| Collector Emitter Cut-Off Current | ICES | 10 | nA | VCES = 50V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 200 | 400 | IC = 10mA, VCE = 5V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 300 | 450 | IC = 200mA, VCE = 5V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 100 | 230 | IC = 1A, VCE = 5V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 30 | 50 | IC = 2A, VCE = 5V | 4 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | 24 | 45 | mV | IC = 100mA, IB = 10mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 60 | 100 | mV | IC = 250mA, IB = 10mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 100 | 180 | mV | IC = 500mA, IB = 25mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 195 | 330 | mV | IC = 1.25, IB = 125mA | 4 | |
| Base-Emitter Saturation Voltage | VBE(sat) | 1020 | 1100 | mV | IC = 1.25A, IB = 125mA | 4 | |
| Base-Emitter Turn-On Voltage | VBE(on) | 895 | 1000 | mV | IC = 1.25A, VCE = 2V | 4 | |
| Collector Output Capacitance | Cobo | 6 | 8 | pF | VCB = 10V, f = 1MHz | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
FMMTL619TA - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.025 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
fmmtl619ta-etched.step/fmmtl619ta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fmmtl619ta.step/fmmtl619ta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (7 pp, sha256
2272defbab7741d6, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).