component
FMMT720QTA
Public Made by Adomby adom
Diodes Incorporated Bipolar Transistors - BJT, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
FMMT720QTA
Diodes Incorporated · Bipolar Transistors - BJT · SOT-23
FMMT720QTA from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base of the PNP transistor; the pin-out drawing shows it on the lower pair of leads, with VEBO limited to -7V and IB to -500mA. |
| 2 | E | passive | Emitter of the PNP transistor; the pin-out drawing shows it on the upper of the two same-side leads. |
| 3 | C | passive | Collector of the PNP transistor, the single lead on the opposite side of the package, with VCEO of -40V and continuous IC of -1.5A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Triode/MOS Tube/Transistor |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Breakdown Voltage | BVCBO | -40 | -95 | V | IC = -100µA | 4 | |
| Collector-Emitter Breakdown Voltage | BVCEO | -40 | -85 | V | IC = -10mA | 4 | |
| Emitter-Base Breakdown Voltage | BVEBO | -7 | -8.8 | V | IE = -100µA | 4 | |
| Collector Cutoff Current | ICBO | -100 | nA | VCB = -35V | 4 | ||
| Emitter Cutoff Current | IEBO | -100 | nA | VEB = -5.6V | 4 | ||
| Collector Emitter Cutoff Current | ICES | -100 | nA | VCE = -35V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 300 | 480 | IC = -10mA, VCE = -2V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 300 | 450 | IC = -0.1A, VCE = -2V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 180 | 290 | IC = -1A, VCE = -2V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 60 | 130 | IC = -1.5A, VCE = -2V | 4 | ||
| Static Forward Current Transfer Ratio | hFE | 12 | 22 | IC = -3A, VCE = -2V | 4 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -26 | -40 | mV | IC = -0.1A, IB = -10mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | -150 | -220 | mV | IC = -1A, IB = -50mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | -245 | -330 | mV | IC = -1.5A, IB = -100mA | 4 | |
| Base-Emitter Turn-On Voltage | VBE(on) | -0.8 | -1 | V | IC = -1.5A, VCE = -2V | 4 | |
| Base-Emitter Saturation Voltage | VBE(sat) | -0.89 | -1 | V | IC = -1.5A, IB = -75mA | 4 | |
| Output Capacitance | Cobo | 19 | 25 | pF | VCB = -10V, f = 1MHz | 4 | |
| Transition Frequency | fT | 150 | 180 | MHz | VCE = -10V, IC = -50mA, f = 100MHz | 4 | |
| Collector-Emitter Voltage | VCEO | -40 | V | 2 | |||
| Collector-Base Voltage | VCBO | -40 | V | 2 | |||
| Emitter-Base Voltage | VEBO | -7 | V | 2 | |||
| Continuous Collector Current | IC | -1.5 | A | 2 | |||
| Peak Pulse Current | ICM | -4 | A | 2 | |||
| Base Current | IB | -500 | mA | 2 | |||
| Power Dissipation | PD | 625 | mW | Note 6: surface mounted on 25mm X 25mm FR4 PCB, steady state, still air | 2 | ||
| Power Dissipation | PD | 806 | mW | Note 7: as Note 6, measured at t ≤ 5 sec | 2 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 200 | °C/W | Note 6: as Note 6 (steady state) | 2 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 155 | °C/W | Note 7: as Note 6, t ≤ 5 sec | 2 | ||
| Thermal Resistance, Junction to Leads | RθJL | 194 | °C/W | Note 8: junction to solder point at end of collector lead | 2 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 150 | °C | 2 | ||
| Electrostatic Discharge - Human Body Model | ESD HBM | 4000 | V | JEDEC Class 3A, JESD22-A114 | 2 | ||
| Electrostatic Discharge - Machine Model | ESD MM | 400 | V | JEDEC Class C, JESD22-A115 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
FMMT720QTA - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
fmmt720qta-etched.step/fmmt720qta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fmmt720qta.step/fmmt720qta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (7 pp, sha256
e60a95ea883aaf04, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).