component
FMF25FPKR006-LH
Public Made by Adomby adom
PSA Prosperity Dielectrics Current Sense Resistors / Shunt Resistors, 2512. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
f1afb2d
FMF25FPKR006-LH
PSA Prosperity Dielectrics · Current Sense Resistors / Shunt Resistors · 2512
FMF25FPKR006-LH from PSA Prosperity Dielectrics, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PSA Prosperity Dielectrics |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code F, ±1%) | -1 | 1 | % | Part-number tolerance code F; DC resistance measurement | 5 | ||
| Temperature coefficient of resistance (±70 column) | TCR | -70 | 70 | ppm/°C | FMF25 2512 rating table, ±70 ppm/°C column; 6 mΩ listed | 4 | |
| ΔR limit after high temperature exposure (F: ±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | 1000 h @125°C unpowered; measured 24±2 h after test | 6 | |
| ΔR limit after temperature cycling (F: ±(0.5%+1mΩ)) | ΔR | -0.5 | 0.5 | % | 1000 cycles, -55°C to +125°C; measured 24±2 h after test | 6 | |
| ΔR limit after moisture resistance (F: ±(0.5%+0.5mΩ)) | ΔR | -0.5 | 0.5 | % | 65°C/80-100%RH, 10 cycles (24 h/cycle); measured 24±2 h after test | 6 | |
| ΔR limit after biased humidity (F: ±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | 1000 h, 85°C/85%RH, 10% of operating power; measured 24±2 h after test | 7 | |
| ΔR limit after operational life (F: ±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | 1000 h @125°C at specified rated power; measured 24±2 h after test | 7 | |
| ΔR limit after resistance to solder heat (F: ±(0.5%+0.5mΩ)) | ΔR | -0.5 | 0.5 | % | Solder dipping 270±5°C for 10 s ±1 s; no mechanical damage | 7 | |
| ΔR limit after thermal shock (F: ±(0.5%+0.5mΩ)) | ΔR | -0.5 | 0.5 | % | -55 to +155°C, 15 min dwell, max 20 s transfer, 300 cycles | 7 | |
| ΔR limit after ESD (±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | ESD test contact min. 1 kV (AEC-Q200-002) | 7 | |
| ΔR limit after board flex (F: ±(0.5%+1mΩ)) | ΔR | -0.5 | 0.5 | % | Bending 2 mm for 2512 size (AEC-Q200 7.21) | 8 | |
| ΔR limit after short time overload (F: ±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | 5 × rated power for 5 seconds (IEC 60115-1 4.13) | 8 | |
| ΔR limit after load life humidity (F: ±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | 40±2°C, 90-95% RH, DC rated voltage 1.5 h ON / 30 min OFF, 1000 h | 8 | |
| ΔR limit after load life (IEC 60115-1 4.25) (F: ±(1%+0.5mΩ)) | ΔR | -1 | 1 | % | Rated voltage 1.5 h on, 0.5 h pause at 70±2°C, 1000 h | 8 | |
| Insulation resistance (termination to coating) | 1000 | MΩ | Test voltage 100±15 V (IEC 60115-1 4.6) | 8 | |||
| Operating temperature range | -55 | 170 | °C | Operating temperature range (power derating section) | 4 | ||
| Storage temperature | 5 | 40 | °C | Storage condition (section 10) | 10 | ||
| Storage relative humidity | 20 | 70 | %RH | Storage condition (section 10) | 10 | ||
| Nominal resistance (R006 = 6 mΩ) | R | 6 | mΩ | Decoded from part number R006; resistance marking R006 format | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | Item Protective Molding Resistive Element Internal Terminal External Terminal Material Resin Alloy Metal Copper Solder | 3 |
CAD (KiCad official)
- Symbol:
FMF25FPKR006-LH - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
fmf25fpkr006-lh-etched.step/fmf25fpkr006-lh-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fmf25fpkr006-lh.step/fmf25fpkr006-lh.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PSA Prosperity Dielectrics datasheet (10 pp, sha256
1d15e82c90ee2489, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FMF25FPKR006-LH
**PSA Prosperity Dielectrics** · Current Sense Resistors / Shunt Resistors · 2512
FMF25FPKR006-LH from PSA Prosperity Dielectrics, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PSA Prosperity Dielectrics |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code F, ±1%) | | -1 | | 1 | % | Part-number tolerance code F; DC resistance measurement | 5 |
| Temperature coefficient of resistance (±70 column) | TCR | -70 | | 70 | ppm/°C | FMF25 2512 rating table, ±70 ppm/°C column; 6 mΩ listed | 4 |
| ΔR limit after high temperature exposure (F: ±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | 1000 h @125°C unpowered; measured 24±2 h after test | 6 |
| ΔR limit after temperature cycling (F: ±(0.5%+1mΩ)) | ΔR | -0.5 | | 0.5 | % | 1000 cycles, -55°C to +125°C; measured 24±2 h after test | 6 |
| ΔR limit after moisture resistance (F: ±(0.5%+0.5mΩ)) | ΔR | -0.5 | | 0.5 | % | 65°C/80-100%RH, 10 cycles (24 h/cycle); measured 24±2 h after test | 6 |
| ΔR limit after biased humidity (F: ±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | 1000 h, 85°C/85%RH, 10% of operating power; measured 24±2 h after test | 7 |
| ΔR limit after operational life (F: ±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | 1000 h @125°C at specified rated power; measured 24±2 h after test | 7 |
| ΔR limit after resistance to solder heat (F: ±(0.5%+0.5mΩ)) | ΔR | -0.5 | | 0.5 | % | Solder dipping 270±5°C for 10 s ±1 s; no mechanical damage | 7 |
| ΔR limit after thermal shock (F: ±(0.5%+0.5mΩ)) | ΔR | -0.5 | | 0.5 | % | -55 to +155°C, 15 min dwell, max 20 s transfer, 300 cycles | 7 |
| ΔR limit after ESD (±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | ESD test contact min. 1 kV (AEC-Q200-002) | 7 |
| ΔR limit after board flex (F: ±(0.5%+1mΩ)) | ΔR | -0.5 | | 0.5 | % | Bending 2 mm for 2512 size (AEC-Q200 7.21) | 8 |
| ΔR limit after short time overload (F: ±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | 5 × rated power for 5 seconds (IEC 60115-1 4.13) | 8 |
| ΔR limit after load life humidity (F: ±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | 40±2°C, 90-95% RH, DC rated voltage 1.5 h ON / 30 min OFF, 1000 h | 8 |
| ΔR limit after load life (IEC 60115-1 4.25) (F: ±(1%+0.5mΩ)) | ΔR | -1 | | 1 | % | Rated voltage 1.5 h on, 0.5 h pause at 70±2°C, 1000 h | 8 |
| Insulation resistance (termination to coating) | | 1000 | | | MΩ | Test voltage 100±15 V (IEC 60115-1 4.6) | 8 |
| Operating temperature range | | -55 | | 170 | °C | Operating temperature range (power derating section) | 4 |
| Storage temperature | | 5 | | 40 | °C | Storage condition (section 10) | 10 |
| Storage relative humidity | | 20 | | 70 | %RH | Storage condition (section 10) | 10 |
| Nominal resistance (R006 = 6 mΩ) | R | | 6 | | mΩ | Decoded from part number R006; resistance marking R006 format | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | | Item Protective Molding Resistive Element Internal Terminal External Terminal Material Resin Alloy Metal Copper Solder | 3 |
## CAD (KiCad official)
- Symbol: `FMF25FPKR006-LH`
- Footprint: `Resistor_SMD:R_2512_6332Metric`
- 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files: `fmf25fpkr006-lh-etched.step` / `fmf25fpkr006-lh-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fmf25fpkr006-lh.step` / `fmf25fpkr006-lh.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [PSA Prosperity Dielectrics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603177176695398400) (10 pp, sha256 `1d15e82c90ee2489`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fmf25fpkr006-lh-datasheet.pdf)