main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs fm9688aa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers fm9688aa: viewers · Ray
fm9688aa-etched.fit.json fm9688aa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm9688aa-etched.glb fm9688aa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm9688aa-etched.step fm9688aa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm9688aa.glb Publish 0.1.0 · Ray
fm9688aa.kicad_mod Publish 0.1.0 · Ray
fm9688aa.kicad_sym Publish 0.1.0 · Ray
fm9688aa.lbr Publish 0.1.0 · Ray
fm9688aa.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json fm9688aa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md fm9688aa: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

FM9688AA

Shenzhen Fuman · Battery Management · SOP-8

FM9688AA from Shenzhen Fuman, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW power_out Boost converter inductor switching node; drain of the internal power MOSFET. Connect to the external boost inductor (typ. 2.2 uH) between SW and BAT. High dv/dt node - route with a short, wide trace.
2 GND power_in Device ground / power return for the switching stage. Tie directly to the negative terminal of the CBAT bypass capacitor and to the system ground plane without vias.
3 BAT bidirectional Li-ion battery positive terminal sense and charge current source. Sources up to 600 mA during constant-current charging and sinks current from the battery during boost operation. Bypass with ~10 uF ceramic capacitor to GND; use a thick trace to the cell.
4 VIN power_in 5 V input supply from USB (recommended 4.5-5.25 V, absolute max 7 V). Powers the linear charger. UVLO rising 4.5 V, falling 3.5 V; input OVP at ~6 V. Bypass with ~1 uF ceramic (optional 1 Ω series R1).
5 DBLU output Discharge status LED driver (blue). Drives the discharge indicator LED to GND; blinks at 2 Hz under low-battery (VLOWQ) condition, solid/off per programmable discharge display mode.
6 DRED output Charge status LED driver (red). Off = not charging, blinking = charging in progress, solid = battery full. Drive an LED to GND with an appropriate series resistor.
7 TAP input User pushbutton input for boost enable/disable. Internally pulled high (idle ~4.9 V at VIN=5 V, ~4.15 V at VBAT=4.2 V). Short press (>40 ms) enables boost; long press (>2 s) disables it. Also supports Hall-sensor mode where a pull-low triggers boost start.
8 OUT power_out 5 V boost output / drain of internal power P-MOS. Supplies up to 500 mA to the USB load; no-load Vout ~5.1 V, current limit ~500 mA, load-OCP threshold 4.5 V. Bypass with ~10 uF ceramic to GND.

Key specifications

Parameter Value
Manufacturer Shenzhen Fuman
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • FM9688AA
  • FM9688AABA

CAD (KiCad official)

  • Symbol: FM9688AA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: fm9688aa-etched.step / fm9688aa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm9688aa.step / fm9688aa.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
fm9688aa.step 122 KB You want the bare part, or you mark your own boards.
fm9688aa-etched.step 2.0 MB You want the part with FM9688AA already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 481 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Fuman datasheet (9 pp, sha256 7776bb744d55506f, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF