component
FM9688AA
Public Made by Adomby adom
Shenzhen Fuman Battery Management, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# FM9688AA++**Shenzhen Fuman** · Battery Management · SOP-8++FM9688AA from Shenzhen Fuman, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | power_out | Boost converter inductor switching node; drain of the internal power MOSFET. Connect to the external boost inductor (typ. 2.2 uH) between SW and BAT. High dv/dt node - route with a short, wide trace. |+| 2 | GND | power_in | Device ground / power return for the switching stage. Tie directly to the negative terminal of the CBAT bypass capacitor and to the system ground plane without vias. |+| 3 | BAT | bidirectional | Li-ion battery positive terminal sense and charge current source. Sources up to 600 mA during constant-current charging and sinks current from the battery during boost operation. Bypass with ~10 uF ceramic capacitor to GND; use a thick trace to the cell. |+| 4 | VIN | power_in | 5 V input supply from USB (recommended 4.5-5.25 V, absolute max 7 V). Powers the linear charger. UVLO rising 4.5 V, falling 3.5 V; input OVP at ~6 V. Bypass with ~1 uF ceramic (optional 1 Ω series R1). |+| 5 | DBLU | output | Discharge status LED driver (blue). Drives the discharge indicator LED to GND; blinks at 2 Hz under low-battery (VLOWQ) condition, solid/off per programmable discharge display mode. |+| 6 | DRED | output | Charge status LED driver (red). Off = not charging, blinking = charging in progress, solid = battery full. Drive an LED to GND with an appropriate series resistor. |+| 7 | TAP | input | User pushbutton input for boost enable/disable. Internally pulled high (idle ~4.9 V at VIN=5 V, ~4.15 V at VBAT=4.2 V). Short press (>40 ms) enables boost; long press (>2 s) disables it. Also supports Hall-sensor mode where a pull-low triggers boost start. |+| 8 | OUT | power_out | 5 V boost output / drain of internal power P-MOS. Supplies up to 500 mA to the USB load; no-load Vout ~5.1 V, current limit ~500 mA, load-OCP threshold 4.5 V. Bypass with ~10 uF ceramic to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Shenzhen Fuman |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `FM9688AA`+- `FM9688AABA`++## CAD (KiCad official)++- Symbol: `FM9688AA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Shenzhen Fuman datasheet](docs/fm9688aa-datasheet.pdf) (9 pp, sha256 `7776bb744d55506f`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/fm9688aa-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "fm9688aa",+ "version": "0.1.0",+ "type": "component",+ "description": "Shenzhen Fuman Battery Management, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "fm9688aa"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "fm9688aa.kicad_sym",+ "fm9688aa.kicad_mod",+ "fm9688aa.glb",+ "fm9688aa.step",+ "fm9688aa.lbr",+ "docs/hero.png",+ "docs/fm9688aa-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}