main
Ray Publish 0.1.0 272a44d
{
  "slug": "fm93c66a-so-t-g",
  "version": "0.1.0",
  "type": "component",
  "description": "FUDAN MICRO EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "fm93c66a-so-t-g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "fm93c66a-so-t-g.kicad_sym",
    "fm93c66a-so-t-g.kicad_mod",
    "fm93c66a-so-t-g.glb",
    "fm93c66a-so-t-g.step",
    "fm93c66a-so-t-g.lbr",
    "docs/hero.png",
    "docs/fm93c66a-so-t-g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "fm93c66a-so-t-g-hero.glb",
    "fm93c66a-so-t-g-hero.overlay.json",
    "fm93c66a-so-t-g-etched.glb"
  ],
  "component": {
    "mpn": "FM93C66A-SO-T-G",
    "manufacturer": "FUDAN MICRO",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588946112594259969",
    "parts": {
      "symbol": "fm93c66a-so-t-g.kicad_sym",
      "footprint": "fm93c66a-so-t-g.kicad_mod",
      "model_3d": "fm93c66a-so-t-g-hero.glb",
      "model_3d_plain": "fm93c66a-so-t-g-etched.glb",
      "model_3d_step": "fm93c66a-so-t-g-etched.step",
      "model_3d_step_plain": "fm93c66a-so-t-g.step",
      "lbr": "fm93c66a-so-t-g.lbr"
    },
    "distributor_links": {
      "lcsc": "C2928937"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T22:18:10Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip Select input; device is enabled when CS is brought high, and DO outputs Ready/Busy status of the part following a write, erase, or program cycle if CS is held low for minimum 200 ns to 250 ns depending on supply voltage."
      },
      {
        "number": "2",
        "name": "DI",
        "type": "input",
        "description": "Serial Data Input for three-wire serial interface; accepts start bit (first logic \"1\" read during rising edge of SK) followed by op-code bits and address bits for instruction execution."
      },
      {
        "number": "3",
        "name": "DO",
        "type": "output",
        "description": "Serial Data Output for three-wire serial interface; outputs data synchronized with rising edges of SK during read operations, and outputs Ready/Busy status (logic \"0\" for busy, logic \"1\" for ready) when CS is brought high during write/erase/program cycles."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference connection."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; pin should be left unconnected."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply voltage input; operating range 1.7V to 5.5V with maximum operating voltage of 6.25V."
      },
      {
        "number": "7",
        "name": "SK",
        "type": "input",
        "description": "Serial Clock input for three-wire serial interface; clock frequency range 1 MHz (at 1.7V to 2.5V) to 2 MHz (at 2.5V to 5.5V); synchronizes data input and output transitions."
      },
      {
        "number": "8",
        "name": "ORG",
        "type": "input",
        "description": "Organization Select input; when connected to VCC or left unconnected, selects x16 (word) organization; when connected to GND, selects x8 (byte) organization; should be set to VSS or VCC for minimum standby power consumption."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": null,
        "consensus": "skipped (clean text read)",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 23,
        "cost_usd": 0.0423,
        "at": "2026-10-26T22:17:59"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588946112594259969",
        "pages": 23,
        "sha256": "24f79e252a44ab45",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "fm93c66a-so-t-g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "fm93c66a-so-t-g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a7d3962be7cf7bf62c0e3cc21a49def66d4711e2db0983f63de6a38460c6277",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}