← Commit history

fm8502d: factory component page (tier=lcsc)

Ray ·2e35f80417 · ·parent 73bfa84
1 file changed +110−8
page.json+110−8
@@ -1,13 +1,120 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "fm8502d",+  "title": "FM8502D",+  "brief": "Shenzhen Fuman LED Drivers, SOP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Shenzhen Fuman LED Drivers, SOP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "led-drv",     "fm8502d"   ],+  "component": {+    "mpn": "FM8502D",+    "manufacturer": "Shenzhen Fuman",+    "package": "SOP-7",+    "pin_count": 7,+    "category": "LED-drv",+    "subcategory": "LED Drivers",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121830_Shenzhen-Fuman-Elec-FM8502D_C2938797.pdf",+    "parts": {+      "symbol": "fm8502d.kicad_sym",+      "footprint": "fm8502d.kicad_mod",+      "model_3d": "fm8502d.glb",+      "model_3d_step": "fm8502d.step",+      "lbr": "fm8502d.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Chip ground reference. All small-signal grounds and the CS sense-resistor low side should return here, tied to the bulk-cap negative terminal at a single point."+      },+      {+        "number": "2",+        "name": "ROVP",+        "type": "input",+        "description": "Open-circuit (output) over-voltage protection setpoint. An external resistor to GND sinks ~30 uA (22-38 uA) from this pin to program Vovp. Pin doubles as an Enable input: below ~240 mV the chip disables switching (Iout=0); above ~400 mV (VEnable) switching resumes, enabling switch-based color-temperature dimming. Leave floating if OVP/Enable is not used."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect. Must be left floating (open) to preserve the required creepage distance between HV-adjacent pins and the low-voltage pins."+      },+      {+        "number": "4",+        "name": "HV",+        "type": "power_in",+        "description": "High-voltage supply input, rated up to 700 V absolute max. Connects (typically through the rectified bulk-cap positive rail) to the internal high-voltage JFET that charges the internal VCC. Turn-on threshold Vhv_ON = 7.5-9 V; UVLO Vhv_OFF = 5.9-7.5 V. Route away from CS and ROVP traces."+      },+      {+        "number": "5",+        "name": "DRAIN",+        "type": "power_out",+        "description": "Drain of the internal 500 V power MOSFET (one of two paralleled DRAIN pins, 5 and 6). Connects to the switching node of the buck inductor. For the FM8502D variant, RDS(on) is ~3 \u03a9 and peak drain current rating is 1100 mA @ TJ=100 \u00b0C. Increase copper area for thermal dissipation, but not excessively (EMI trade-off)."+      },+      {+        "number": "6",+        "name": "DRAIN",+        "type": "power_out",+        "description": "Drain of the internal 500 V power MOSFET (second of two paralleled DRAIN pins, 5 and 6). Tie to pin 5 at the switching node. Absolute max drain voltage -0.3 to 500 V."+      },+      {+        "number": "7",+        "name": "CS",+        "type": "input",+        "description": "Current sense input. External sense resistor Rcs from source of the internal MOSFET to GND; CS taps the top of Rcs. Peak-current comparator threshold Vcs_TH = 373 mV (365-381 mV), with 500 ns leading-edge blanking and 200 ns turn-off delay. LED current is Ipk/2 = 0.373 V / (2\u00b7Rcs). Absolute max -0.3 to 8 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121830_Shenzhen-Fuman-Elec-FM8502D_C2938797.pdf",+        "pages": 9,+        "sha256": "22da0f69a6eb4874",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 7,+        "described": 7,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Shenzhen Fuman",+      "Package": "SOP-7",+      "Category": "LED-drv",+      "Pins": "7"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "fm8502d"+  ],+  "discovery_pitch": "FM8502D (Shenzhen Fuman) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +132,5 @@     "docs/fm8502d-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file