FM5011HBD5

{
  "slug": "fm5011hbd5",
  "version": "0.1.0",
  "type": "component",
  "description": "Shenzhen Fuman Battery Management, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "fm5011hbd5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "fm5011hbd5.kicad_sym",
    "fm5011hbd5.kicad_mod",
    "fm5011hbd5.glb",
    "fm5011hbd5.step",
    "fm5011hbd5.lbr",
    "docs/hero.png",
    "docs/fm5011hbd5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "fm5011hbd5-hero.glb",
    "fm5011hbd5-hero.overlay.json",
    "fm5011hbd5-etched.glb"
  ],
  "component": {
    "mpn": "FM5011HBD5",
    "manufacturer": "Shenzhen Fuman",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835422303498241",
    "parts": {
      "symbol": "fm5011hbd5.kicad_sym",
      "footprint": "fm5011hbd5.kicad_mod",
      "model_3d": "fm5011hbd5-hero.glb",
      "model_3d_plain": "fm5011hbd5-etched.glb",
      "model_3d_step": "fm5011hbd5-etched.step",
      "model_3d_step_plain": "fm5011hbd5.step",
      "lbr": "fm5011hbd5.lbr"
    },
    "distributor_links": {
      "lcsc": "C2937656"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T14:17:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin, recommended operating range 4.5 to 5.5 V with absolute maximum -0.3 to 6 V, and input overvoltage above 6.0 V (VIN-OVP) causes OUT to be switched off."
      },
      {
        "number": "2",
        "name": "DL0",
        "type": "output",
        "description": "Charge-status LED drive pin (DGRE/DRED charging indicator), with port voltage limited to -0.3 to 5 V."
      },
      {
        "number": "3",
        "name": "DL1",
        "type": "output",
        "description": "Discharge-status and battery-level LED drive pin (D1 first-level indicator), with port voltage limited to -0.3 to 5 V."
      },
      {
        "number": "4",
        "name": "DL2",
        "type": "output",
        "description": "Discharge-status and battery-level LED drive pin (D2/D3 level indicator), with port voltage limited to -0.3 to 5 V."
      },
      {
        "number": "5",
        "name": "BAT",
        "type": "bidirectional",
        "description": "Battery positive terminal that supplies about 600 mA charge current to the battery during charging and is rated -0.3 to 5 V, so the battery trace should not be too thin."
      },
      {
        "number": "6",
        "name": "WTP",
        "type": "input",
        "description": "Key input pin for single- and double-key and flashlight control, with floating voltage of 0.8 V in standby and 1.6 V in working state."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "output",
        "description": "Inductor drive pin connected to the drain of the internal power switch, rated -0.3 to 15 V, and no voltage difference should be applied between SW and OUT while the device is unpowered."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "power_out",
        "description": "Boost output pin connected to the source of the power P-MOS, rated -0.3 to 15 V, with overcurrent and short-circuit protection on this output."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: BAT is described only as the battery positive terminal and charge current source; its direction (cha; SW is described as an inductor drive pin and power MOS drain, with no stated drive direction; output; The datasheet prints the ground pad as 'GND EP' with no numeric pin number; EP is used as the printe",
          "exposed pad 9 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0526,
        "at": "2026-10-18T14:15:02"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835422303498241",
        "pages": 10,
        "sha256": "012d307a765795c6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "fm5011hbd5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "fm5011hbd5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "44a459600d5868ff92a984b48a978bf05c5d9a976fff6c9b1bf5319d152a8019",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}